Index (planit-all 0.3.0 API)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
All Classes All Packages

A

ABANDONED - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
AbstractPhysicalCost - Class in org.goplanit.cost.physical: Class for dynamic cost functions, which calculate link segment costs for each iteration
AbstractPhysicalCost(AbstractPhysicalCost) - Constructor for class org.goplanit.cost.physical.AbstractPhysicalCost: Copy Constructor
AbstractPhysicalCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.AbstractPhysicalCost
AbstractVirtualCost - Class in org.goplanit.cost.virtual: Object to handle the travel time cost of a virtual link
AbstractVirtualCost(AbstractVirtualCost) - Constructor for class org.goplanit.cost.virtual.AbstractVirtualCost: Copy Constructor
AbstractVirtualCost(IdGroupingToken) - Constructor for class org.goplanit.cost.virtual.AbstractVirtualCost: Constructor
accept(Bush) - Method in class org.goplanit.assignment.ltm.sltm.consumer.BushFlowUpdateConsumer: Update(increase) the (network) flows based on the bush at hand as dictated by the data configuration
accept(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.consumer.InitialiseBushEdgeSegmentDemandConsumer
accept(OdZone, OdZone, Double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathFlowUpdateConsumer: Update the turn flows for the path of the given origin,destination,demand combination
accept(T) - Method in interface org.goplanit.utils.function.PlanitExceptionConsumer
accept(T, U, V) - Method in interface org.goplanit.utils.functionalinterface.TriConsumer: Performs this operation on the given arguments
accept(T, U, V, W) - Method in interface org.goplanit.utils.functionalinterface.QuadConsumer: Performs this operation on the given arguments
acceptedTurnFlows - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: The output of this update that can be collected after execution
ACCESS - Static variable in class org.goplanit.osm.tags.OsmAccessTags: key: access tag
accessEdgeSegment - Variable in class org.goplanit.zoning.DirectedConnectoidImpl: the access point to an infrastructure layer
AccessGroupProperties - Interface in org.goplanit.utils.network.layer.macroscopic: Contains the properties of a mode specific to a link segment type
AccessGroupPropertiesFactory - Class in org.goplanit.network.layer.macroscopic: Create Mode specific access properties to be used on macroscopic link segment types
AccessGroupPropertiesFactory() - Constructor for class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory
AccessGroupPropertiesImpl - Class in org.goplanit.network.layer.macroscopic: Group of modes with specific properties for the macroscopic perspective on the supply side, i.e.
AccessGroupPropertiesImpl(Collection<Mode>) - Constructor for class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: access properties with only defining allowed modes without setting any restrictive speeds compared to the physical speed on the links it is applied on
AccessGroupPropertiesImpl(AccessGroupPropertiesImpl) - Constructor for class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Copy constructor
accessVertex - Variable in class org.goplanit.zoning.UndirectedConnectoidImpl: the access point to an infrastructure layer
accessZone - Variable in class org.goplanit.zoning.ConnectoidImpl.AccessZoneProperties: access zone for these properties
AccessZoneProperties(Zone) - Constructor for class org.goplanit.zoning.ConnectoidImpl.AccessZoneProperties: constructor
AccessZoneProperties(ConnectoidImpl.AccessZoneProperties) - Constructor for class org.goplanit.zoning.ConnectoidImpl.AccessZoneProperties: Copy constructor
accessZones - Variable in class org.goplanit.zoning.ConnectoidImpl: the zones and their properties accessible from this connectoid
activate(String...) - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Choose to add a given way value to be on top of the defaults, e.g.
activate(List<String>) - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Choose to add a given way value to be on top of the defaults, e.g.
activateAll() - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: activate all types explicitly
activateAllOsmHighwayTypes() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Activate all known OSM highway types
activateAllOsmRailwayTypes() - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: activate all known OSM railway types
activateAllOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Activate all known OSM railway types
activateAllUsedNodeSplittingRates(double[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: For all nodes that have downstream link segments with positive sending flows, ensure they are activated for splitting rates (activation implies tracking and potentially blocking) if not already.
activateBushBased(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: (De)Activate the bush based assignment strategy.
activateDetailedLogging(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: (De)Activate additional detailed logging specifically for the sLTM assignment procedure
activatedOsmTypes - Variable in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: the OSM types that are marked as supported OSM types, i.e., will be processed when parsing
activatedPlanitModes - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: track the PLANit modes that we include in the network to write
activateEligibleSplittingRateTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: Initialise tracking of splitting rates and network flows on all nodes that are used by any currently active PAS.
activateEligibleSplittingRateTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingPath: In a path based implementation, tracked nodes overlap with potentially blocking nodes.
activateEligibleSplittingRateTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Let derived loading implementation initialise which nodes are to be tracked for network splitting rates, e.g.
activateHighwayParser(boolean) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: activate the parsing of highways
activateNextExtension(boolean) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Given the current extension status and type of sLTM that we are conducting, activate the next extension in loading to improve the likelihood of network loading convergence.
activateNode(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Activate a node so we are able to track its splitting rates (and turn flows) during loading.
activateNodeTrackingFor(Pas) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: For each PAS we must be able to determine the network level flows along the segments, see StaticLtmLoadingBush.computeSubPathSendingFlow(DirectedVertex, DirectedVertex, EdgeSegment[]).
activateOdSkimOutputType(OdSkimSubOutputType) - Method in class org.goplanit.output.configuration.OdOutputTypeConfiguration: Activate an ODSkimOutputType for this output type configuration
activateOsmHighwayType(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Choose to add given highway type to parsed types on top of the defaults, e.g.
activateOsmHighwayTypes(String...) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Activate all passed in highway types
activateOsmHighwayTypes(List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Activate all passed in highway types
activateOsmRailwayType(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Choose to add given railway type to parsed types on top of the defaults, e.g.
activateOsmRailwayTypes(String...) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: activate all passed in railway types
activateOsmRailwayTypes(List<String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: activate all passed in railway types
activateOsmWayType(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Choose to add given way value type to parsed types on top of the defaults, e.g.
activateOsmWayTypes(String...) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Activate all passed in way types
activateOsmWayTypes(List<String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Activate all passed in way types
activateOutput(OutputType) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Method that allows one to activate specific output types for persistence on the traffic assignment instance
activateParser(boolean) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: set the flag whether or not the ways represented by these settings should be parsed or not
activateParser(boolean) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: set the flag whether or not the public transport infrastructure should be parsed or not
activatePredefinedMode(PredefinedModeType) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Activate the provided predefined mode from the activated modes listed for inclusion in the MATSIM network (in mapped form).
activateRailwayParser(boolean) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: activate the parsing of railways
activateSubOutputType(SubOutputTypeEnum) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Activate a SubOutputTypeEnum for this output type configuration
ACTIVE_LAYER_XML_ID - Static variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: proposed active layer id
activeSubOutputTypes - Variable in class org.goplanit.output.configuration.OutputTypeConfiguration: Stores all active sub output types (if any).
AcyclicMinMaxShortestPathAlgorithm - Class in org.goplanit.algorithms.shortestpath: Build a min/max shortest path tree for a given origin vertex.
AcyclicMinMaxShortestPathAlgorithm(ACyclicSubGraph, Collection<? extends DirectedVertex>, double[], int) - Constructor for class org.goplanit.algorithms.shortestpath.AcyclicMinMaxShortestPathAlgorithm: Constructor
ACyclicSubGraph - Interface in org.goplanit.graph.directed.acyclic: An acyclic sub graph contains a subset of the full graph without cycles.
ACyclicSubGraphImpl - Class in org.goplanit.graph.directed.acyclic: An acyclic sub graph contains a subset of the full graph without cycles.
ACyclicSubGraphImpl(ACyclicSubGraphImpl) - Constructor for class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Copy constructor
ACyclicSubGraphImpl(IdGroupingToken, int, DirectedVertex) - Constructor for class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Constructor
add(String, String) - Static method in class org.goplanit.utils.epsg.EpsgCodesByCountry: add a mapping to the register
add(CumulativePoint, double) - Method in class org.goplanit.utils.cumulatives.PiecewiseLinearCumulativeCurve: append a new cumulative point to the curve which must be later or equal than the current latest point given the passed in timeInSecondsEpsilon
addAccessGroupProperties(AccessGroupProperties) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Add access group properties for the modes allowed by it.
addAccessGroupProperties(AccessGroupProperties) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Add access group properties for the modes allowed by it.
addAccessMode(Mode) - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Add mode to access group.
addAccessMode(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Add a new access mode to the group
addAccessZone(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: Add an access zone with default properties
addAccessZone(Zone) - Method in class org.goplanit.zoning.ConnectoidImpl: Add an access zone with default properties
addAll(Iterable<? extends V>) - Method in interface org.goplanit.utils.wrapper.MapWrapper: add all elements of iterable
addAllowedHighwayModes(String, String...) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: add allowed osm modes to highwaytype
addAllowedHighwayModes(String, List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: add allowed osm modes to highwaytype
addAllowedMode(Zone, Mode) - Method in interface org.goplanit.utils.zoning.Connectoid: Add an allowed mode.
addAllowedMode(Zone, Mode) - Method in class org.goplanit.zoning.ConnectoidImpl: Add an allowed mode.
addAllowedModeCategories(String, boolean, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in mode categories as allowed for all its child modes
addAllowedModeCategories(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in mode categories as allowed for all its child modes
addAllowedModes(String, boolean, List<String>) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in modes as modes that are explicitly allowed access regardless of the mode category, i.e., this takes precedence over the categories.
addAllowedModes(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in modes as modes that are explicitly allowed access regardless of the mode category, i.e., this takes precedence over the categories.
addAllowedModes(String, List<String>) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in modes as modes that are explicitly allowed access regardless of the mode category, i.e., this takes precedence over the categories.
addAllowedModes(TransferZone, Set<Mode>) - Method in interface org.goplanit.utils.zoning.Connectoid: Add allowed modes.
addAllowedModes(Zone, Mode...) - Method in interface org.goplanit.utils.zoning.Connectoid: Add allowed modes.
addAllowedOsmWayModes(String, List<String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: add allowed osm modes to osm way type
addAllTo(Map<Long, Set<Link>>, Map<Long, Set<Link>>) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: add addition to destination
addConnectoidByTransferZone(TransferZone, DirectedConnectoid) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Register a known mapping from transfer zone to connectoid
addCsvFileNamePerOutputType(OutputTypeEnum, String) - Method in class org.goplanit.output.formatter.CsvFileOutputFormatter: Add a new name of the CSV output file for a specified output type
addCsvFileNamePerOutputType(OutputTypeEnum, String) - Method in interface org.goplanit.output.formatter.CsvTextFileOutputFormatter: Add a new name of a CSV output file for a specified output type
addDirectedConnectoidByLocation(MacroscopicNetworkLayer, Point, DirectedConnectoid) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Add a connectoid to the registered connectoids indexed by their OSM id
addDisallowedModes(String, boolean, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in modes as modes that are explicitly NOT allowed access regardless of the mode category or allowed modes, i.e., this takes precedence over all other settings.
addDisallowedModes(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: add the passed in modes as modes that are explicitly NOT allowed access regardless of the mode category or allowed modes, i.e., this takes precedence over all other settings.
addEdge(Edge) - Method in class org.goplanit.graph.VertexImpl: Add edge, do not invoke when parsing networks, this connection is auto-populated before the assignment starts based on the edge and its two vertices that have been registered.
addEdge(Edge) - Method in interface org.goplanit.utils.graph.Vertex: Add edge, do not invoke when parsing networks, this connection is auto-populated before the assignment starts based on the edge and its two vertices that have been registered.
addEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Register an edge segment on the subgraph
addEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Add edgeSegment, do not invoke when parsing networks, this connection is auto-populated before the assignment starts based on the edge segment vertices that have been registered.
addEdgeSegment(EdgeSegment) - Method in class org.goplanit.network.layer.service.ServiceNodeImpl: Add edgeSegment, do not invoke when parsing networks, this connection is auto-populated before the assignment starts based on the edge segment vertices that have been registered.
addEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedSubGraph: Register an edge segment on the subgraph
addEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Add edgeSegment, do not invoke when parsing networks, this connection is auto-populated before the assignment starts based on the edge segment vertices that have been registered.
addFileHandler(GtfsFileHandler<? extends GtfsObject>) - Method in class org.goplanit.gtfs.reader.GtfsReader: Register a handler for a specific file type
addHandler(GtfsFileHandler<? extends GtfsObject>) - Method in class org.goplanit.gtfs.reader.GtfsFileReaderBase: Register handler
addInputProperty(String, Object) - Method in class org.goplanit.graph.EdgeImpl: Add a property from the original input that is not part of the readily available link members
addInputProperty(String, Object) - Method in class org.goplanit.graph.VertexImpl: Add a property from the original input that is not part of the readily available members
addInputProperty(String, Object) - Method in interface org.goplanit.utils.graph.Edge: Add a property from the original input that is not part of the readily available link members
addInputProperty(String, Object) - Method in interface org.goplanit.utils.graph.Vertex: Add a property from the original input that is not part of the readily available members
addInputProperty(String, Object) - Method in interface org.goplanit.utils.zoning.Zone: Add a property from the original input that is not part of the readily available members
addInputProperty(String, Object) - Method in class org.goplanit.zoning.ZoneImpl: Add a property from the original input that is not part of the readily available members
addInvalidStopAreaStopPosition(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: add identified osm entity as invalid stop_position.
addLayer(String) - Method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: add a proposed layer
addLegSegment(ServiceLegSegment) - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Add a new leg segment (directed leg) to the end of the already registered legs.
addLegSegment(ServiceLegSegment) - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Add a new leg segment (directed leg) to the end of the already registered legs.
addLinksToSpatialLinkIndex(Collection<Link>) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Add provided links to local spatial index based on their bounding box
addListener(PlanitComponentListener) - Method in class org.goplanit.component.PlanitComponentFactory: Add a listener for all its known supported PLANit component event types
addListener(PlanitComponentListener, PlanitComponentEventType...) - Method in class org.goplanit.component.PlanitComponentFactory: Add a listener for PLANit component event types fired
addListener(EventListener) - Method in class org.goplanit.utils.event.EventProducerImpl: add a listener for one or more event types that are presumably triggered by this producer absed on its known supported types.
addListener(EventListener, EventListenerPriority) - Method in class org.goplanit.utils.event.EventProducerImpl: Add a listener for one or more event types (collected from listener's known supported types) that are presumably triggered by this producer
addListener(EventListener, EventListenerPriority, EventType...) - Method in class org.goplanit.utils.event.EventProducerImpl: Add a listener for one or more event types that are presumably triggered by this producer
addListener(EventListener, EventType...) - Method in class org.goplanit.utils.event.EventProducerImpl: Add a listener for one or more event types that are presumably triggered by this producer, with the default priority (low)
addListener(GraphModifierListener) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Register listener for all its supported types fired by the graph modifier
addListener(GraphModifierListener) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Register listener for all its supported types fired by the graph modifier
addListener(GraphModifierListener) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Register listener for all its supported types fired by the graph modifier
addListener(GraphModifierListener) - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierEventProducer: Register listener for all its supported types fired by the graph modifier
addListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Register listeners for events fired by the graph modifier
addListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Register listeners for events fired by the graph modifier
addListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Register listeners for events fired by the graph modifier
addListener(GraphModifierListener, GraphModifierEventType) - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierEventProducer: Register listeners for events fired by the graph modifier
addListener(ZoningModifierListener, ZoningModifierEventType) - Method in interface org.goplanit.utils.zoning.modifier.event.ZoningModifierEventProducer: Register listeners for events fired by a zoning modifier
addListener(ZoningModifierListener, ZoningModifierEventType) - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: Register listeners for events fired by a zoning modifier
addModifiedLinkSegmentType(MacroscopicLinkSegmentType, Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes: Add a modified link segment type based on the changes in mode support.
addModifiedLinkSegmentType(MacroscopicLinkSegmentType, MacroscopicLinkSegmentType, Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes: Add a modified link segment type based on the changes in mode support.
addOriginDemandPcuH(double) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Add additional demand to the bush's root
addOsmCircularWay(OsmWay) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: add a circular way
addOsmMode2PlanitModeMapping(String, Mode) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: add mapping from osm mode to PLANit mode
addOsmNode(OsmNode) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: add an osm node
addOsmRelationOuterRoleOsmWay(OsmWay) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Add OSM way to keep.
addProperty(OutputPropertyType) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Add an output property to be included in the output files
addRelativeLegSegmentTiming(ServiceLegSegment, LocalTime, LocalTime) - Method in interface org.goplanit.service.routed.RoutedTripSchedule: Add a new leg's timing to the end of the already registered leg timings.
addRelativeLegSegmentTiming(ServiceLegSegment, LocalTime, LocalTime) - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Add a new leg's timing to the end of the already registered leg timings.
addTo(double[], double[]) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Add the values of a second array element-wise to the first array
addTo(double[], double[], int) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Add the values of a second array element-wise to the first array
addToAcceptedTurnFlows(int, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: add to accepted turn flows
addToNextSegmentFlows(long, double) - Method in class org.goplanit.assignment.traditionalstatic.ModeData: add passed in flow to next segment flows for given id
addtoStart(Object, Object[]) - Static method in class org.goplanit.utils.arrays.ArrayUtils: add an element to the start of the passed in array.
addToTransferZoneGroup(TransferZoneGroup) - Method in interface org.goplanit.utils.zoning.TransferZone: register this transfer zone group as a group this transfer zone is part of
addToTransferZoneGroup(TransferZoneGroup) - Method in class org.goplanit.zoning.TransferZoneImpl: register this transfer zone group as a group this transfer zone is part of
addTrafficAssignmentBuilder(TrafficAssignmentBuilder<?>) - Method in class org.goplanit.project.ProjectAssignmentBuilders: add traffic assignment
addTransferZone(TransferZone) - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Add a transferZone and also register this group on this transfer zone at the same time
addTransferZone(TransferZone) - Method in class org.goplanit.zoning.TransferZoneGroupImpl: Add a transferZone and also register this group on this transfer zone at the same time
addTransferZoneByOsmId(EntityType, long, TransferZone) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: add a incomplete transfer zone to the tracking container
addTransferZoneGroupByOsmId(long, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Add a transfer zone group by its OSM id
addTurnSendingFlow(EdgeSegment, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Add turn sending flow to the bush.
addTurnSendingFlow(EdgeSegment, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Add turn sending flow for a given turn
addUnprocessedPtv1Station(OsmEntity) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: add unprocessed ptv1 station
addUnprocessedPtv2Station(OsmEntity) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: add unprocessed ptv2 station
addUnprocessedStopPosition(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: add unprocessed stop position
addWaitingAreaWithoutMappedPlanitMode(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Add identified OSM entity as valid waiting area (platform, pole), but it has no mapped PLANit mode, e.g.
afterSubGraphRemovalComplete() - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: finalise subgraph removal for the connectoids by recreating the connectoid ids
AGENCIES - org.goplanit.gtfs.enums.GtfsFileType
AGENCY - org.goplanit.gtfs.enums.GtfsObjectType
AGENCY_EMAIL - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_FARE_URL - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_ID - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_LANG - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_NAME - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_PHONE - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_TIMEZONE - org.goplanit.gtfs.enums.GtfsKeyType
AGENCY_URL - org.goplanit.gtfs.enums.GtfsKeyType
AGRICULTURAL - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: agricultural tag
AGRICULTURAL - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: agricultural vehicles
ALGORITHM_B - Static variable in class org.goplanit.assignment.TrafficAssignment: short hand to choose algorithmB as assignment type
AlgorithmB - Class in org.goplanit.assignment.algorithmb: Algorithm B implementation based on the work of Dial (2006).
AlgorithmB(AlgorithmB) - Constructor for class org.goplanit.assignment.algorithmb.AlgorithmB: Copy Constructor
AlgorithmB(IdGroupingToken) - Constructor for class org.goplanit.assignment.algorithmb.AlgorithmB: Constructor
AlgorithmBEquilibration - Class in org.goplanit.assignment.algorithmb: All the functionality to equilibrate algorithm B
AlgorithmBEquilibration(AlgorithmB, OutputManager) - Constructor for class org.goplanit.assignment.algorithmb.AlgorithmBEquilibration: Constructor
AlgorithmBSimulationData - Class in org.goplanit.assignment.algorithmb: Simulation data which are specific to Traditional Static Assignment
AlgorithmBSimulationData() - Constructor for class org.goplanit.assignment.algorithmb.AlgorithmBSimulationData: Constructor
ALL_IN_ONE_LAYER_ID - Static variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: proposed all-in-one layer id
allowedModes - Variable in class org.goplanit.zoning.ConnectoidImpl.AccessZoneProperties: the explicitly allowed modes, when null all modes allowed
ALTERNATING - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
alwaysKeepLargestsubNetwork - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: indicate whether or not to keep the largest subnetwork when removeDanglingSubNetworks is set to true even when it does not adhere to the criteria of discardSubNetworkBelowSize and/or discardSubNetworkAbovesize
ANTI_CLOCKWISE - Static variable in class org.goplanit.osm.tags.OsmDirectionTags
ANTIGUA_BARBUDA - Static variable in class org.goplanit.utils.locale.CountryNames
anyIsNotNull() - Method in class org.goplanit.utils.misc.Pair: check if any of the two values is not null
anyKeyMatchesAnyValueTag(Map<String, String>, String[], String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Verify if any of the passed in keys matches and of the passed in values in the tags provided, all value tags are filtered by applying OsmTagUtils.VALUETAG_SPECIALCHAR_STRIP_REGEX
anyKeyMatchesAnyValueTag(Map<String, String>, String, String[], String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Verify if any of the passed in keys matches and of the passed in values in the tags provided
appendRelativePathToURL(URL, String) - Static method in class org.goplanit.utils.misc.UrlUtils: Append the given relative path to the URL.
APPLICATION_PROPERTIES_FILE_NAME - Static variable in class org.goplanit.io.xml.util.ApplicationProperties
ApplicationProperties - Class in org.goplanit.io.xml.util: Class supporting easy access to application.properties file
ApplicationProperties() - Constructor for class org.goplanit.io.xml.util.ApplicationProperties
apply(R, S, T) - Method in interface org.goplanit.utils.functionalinterface.TriFunction: Performs this operation on the given arguments
apply(T) - Method in interface org.goplanit.utils.function.PlanitExceptionFunction
applyAcceptedTurnFlowUpdate(int, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.BushFlowUpdateConsumer: Register the bush accepted turn flow to the turn if required.
applyAcceptedTurnFlowUpdate(int, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.BushTurnFlowUpdateConsumer: track the turn accepted flows when they are classified as being tracked, otherwise do nothing
applyPathFinalSegmentFlowUpdate(EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathFlowUpdateConsumer: Apply the flow to a final path segment (and update link sending flow if required) which has no outgoing edge segment on the turn
applyPathFinalSegmentFlowUpdate(EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathLinkSendingFlowUpdateConsumer: Apply final path flow on last segment that otherwise would not have been updated in the turn based PathLinkSendingFlowUpdateConsumer.applySingleFlowUpdate(int, EdgeSegment, double)
applyPathFinalSegmentFlowUpdate(EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathTurnFlowUpdateConsumer: DO NOTHING - since this is a turn update and the final turn has no outgoing edge segment it is never tracked (because it does not exist), therefore, we can disregard updating the final segment flow in a turn flow update setting, even when tracking link segment sending flows (since this sending flow is never required as input to a node model update
applySingleFlowUpdate(int, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathFlowUpdateConsumer: Apply the flow to the turn (and update link sending flow if required)
applySingleFlowUpdate(int, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathLinkSendingFlowUpdateConsumer: For each entry segment update the in(sending)flow
applySingleFlowUpdate(int, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathTurnFlowUpdateConsumer: Apply the flow to the turn (and update link sending flow if required)
ApplyToNodeModelResult - Interface in org.goplanit.assignment.ltm.sltm.consumer: Apply this to the result of a Tampere node model execution for a particular node, it is invoked with the node the model was invoked on, the resulting flow acceptance factors and the sending flow turn flows (rows are entry link segments, columns outgoing link segments).
AREA - Static variable in class org.goplanit.osm.tags.OsmTags
ArgumentParser - Class in org.goplanit.utils.args: This class parses program arguments and returns them as a map of file types and file locations.
ArgumentParser() - Constructor for class org.goplanit.utils.args.ArgumentParser
ArgumentStyle - Enum in org.goplanit.utils.args: Supported styles for argument parsing
ArrayUtils - Class in org.goplanit.utils.arrays: General methods for arrays
ArrayUtils() - Constructor for class org.goplanit.utils.arrays.ArrayUtils
ARRIVAL_TIME - org.goplanit.gtfs.enums.GtfsKeyType
asDirectory(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Make sure it is a directory by adding a trailing forward slash if not present
asLinkSegmentIndexedArray(MacroscopicLinkSegments) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Method to collect all fundamental diagrams for the given link segments in a 1:1 fashion in a raw array based on the current setup of this component.
asLocalPath(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: converts to a Path.
asRelativeUri(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Method that attempts to strip everything from the URI to make it a relative URI.
asRelativeUriFromJar(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Extract relative URI based on provided URI, knowing that the uri points to a location within a jar.
asRelativeUriFromRoot(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Specifically meant for URIs that have been made relative, e.g.
asRelativeUriFromUserDir(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Extract relative URI based on provided URI and the user.dir property set for the application.
asRelativeUriFromWorkingDir(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Extract relative URI based on provided URI and the current working directory of the application.
assignmentBuilders - Variable in class org.goplanit.project.CustomPlanItProject: The registered assignment builders
asSortedSetByStartTime() - Method in class org.goplanit.demands.Demands.TimePeriods: Returns a set of all registered time periods sorted by the start time, i.e., the way th time period is comparable
AStarShortestPathAlgorithm - Class in org.goplanit.algorithms.shortestpath: A* shortest path algorithm A* shortest path is a one-to-one implementation of the shortest path algorithm based on the generalized costs on each link segment (edge).
AStarShortestPathAlgorithm(double[], int, CoordinateReferenceSystem, double) - Constructor for class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: Constructor for an edge cost based A* algorithm for finding shortest paths.
ATTRIBTUION_EMAIL - org.goplanit.gtfs.enums.GtfsKeyType
ATTRIBUTION - org.goplanit.gtfs.enums.GtfsObjectType
ATTRIBUTION_ID - org.goplanit.gtfs.enums.GtfsKeyType
ATTRIBUTION_PHONE - org.goplanit.gtfs.enums.GtfsKeyType
ATTRIBUTION_URL - org.goplanit.gtfs.enums.GtfsKeyType
ATTRIBUTIONS - org.goplanit.gtfs.enums.GtfsFileType
ATV - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: all-terrain vehicles, e.g.
AUSTRALIA - Static variable in class org.goplanit.utils.locale.CountryNames
AUSTRALIA_LAMBERT - Static variable in class org.goplanit.utils.epsg.EpsgCodesByCountry: Area of use: Australia, EPSG:3112
averaged - Variable in class org.goplanit.gap.NormBasedGapFunction: indicate if the result is to be averaged

B

B - org.goplanit.tntp.enums.NetworkFileColumnType
backupDefaults - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory
BACKWARD - Static variable in class org.goplanit.osm.tags.OsmDirectionTags: direction subtype for road modes, e.g.
BAHAMAS - Static variable in class org.goplanit.utils.locale.CountryNames
BANGLADESH - Static variable in class org.goplanit.utils.locale.CountryNames
BARBADOS - Static variable in class org.goplanit.utils.locale.CountryNames
BaseOutputFormatter - Class in org.goplanit.output.formatter: Base class for all formatters of output data, i.e.
BaseOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.output.formatter.BaseOutputFormatter: Constructor
BaseReaderImpl<T> - Class in org.goplanit.converter: Abstract base class implementation for converter readers which has a mechanism to (optionally) keep track of entities by their source id as PLANit only indexes by internal id
BaseReaderImpl() - Constructor for class org.goplanit.converter.BaseReaderImpl: Constructor
BaseWriterImpl<T> - Class in org.goplanit.converter: abstract base class implementation to write a PLANit network to disk with id mapping sorted for convenience
BaseWriterImpl(IdMapperType) - Constructor for class org.goplanit.converter.BaseWriterImpl: constructor
BASIC_AND_LOCATION_BASED_KEY_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: combining basicCycleWayKeyTags and locationBasedCycleWayKeyTags
BASIC_CYCLEWAY_KEY_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: cycleway cycleway:both
BHUTAN - Static variable in class org.goplanit.utils.locale.CountryNames
BICYCLE - org.goplanit.utils.mode.PredefinedModeType
BICYCLE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: mode bicycle, can be used as key bicycle=yes
BICYCLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: bicycle part of vehicle category type
BICYCLE_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.BicycleMode
BICYCLE_USABLITY_FEATURES - Static variable in class org.goplanit.mode.BicycleMode
BicycleMode - Class in org.goplanit.mode: the predefined bicycle mode name: bicycle maxspeed (km/h): 15 pcu: 0.2 vehicular type: VEHICULAR motorisation: NON_MOTORISED track: ROAD use: PRIVATE
BicycleMode(IdGroupingToken) - Constructor for class org.goplanit.mode.BicycleMode: Constructor for bicycle mode
BIKES_ALLOWED - org.goplanit.gtfs.enums.GtfsKeyType
BLOCK_ID - org.goplanit.gtfs.enums.GtfsKeyType
BOOLEAN - org.goplanit.output.enums.DataType
BOTH - Static variable in class org.goplanit.osm.tags.OsmDirectionTags: direction subtype for road modes, e.g.
BOTH - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key, see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
BOTH - Static variable in class org.goplanit.osm.tags.OsmTags
bothNotNull() - Method in class org.goplanit.utils.misc.Pair: check if both values are not null
BOTSWANA - Static variable in class org.goplanit.utils.locale.CountryNames
BOUNDARY - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
boundaryLocation - Variable in class org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary: the location of this boundary on the link segment
BOUNDINGBOX_NEARNESS_DISTANCE_METERS - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderData: the distance that qualifies as being near to the network bounding box.
BoxUtils - Class in org.goplanit.utils.box: Utility class assisting in more complex (auto-)boxing of types in for example container classes
BoxUtils() - Constructor for class org.goplanit.utils.box.BoxUtils
BPR - Static variable in interface org.goplanit.cost.physical.PhysicalCost: short hand for configuring physical cost with BPR function instance
BPRConfigurator - Class in org.goplanit.cost.physical: Configurator for BPRLinkTravelTimeCost implementation
BPRConfigurator() - Constructor for class org.goplanit.cost.physical.BPRConfigurator: Constructor
BPRLinkTravelTimeCost - Class in org.goplanit.cost.physical: Well known BPR link performance function to compute travel time cost on link segment based on flow and configuration parameters.
BPRLinkTravelTimeCost(BPRLinkTravelTimeCost) - Constructor for class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Copy Constructor
BPRLinkTravelTimeCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Constructor
BPRLinkTravelTimeCost.BPRParameters - Class in org.goplanit.cost.physical: Inner class to store Map of alpha and beta parameters used in BPR function for each mode
BPRParameters() - Constructor for class org.goplanit.cost.physical.BPRLinkTravelTimeCost.BPRParameters: Constructor
bprParametersPerLinkSegment - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Array to store BPRParameters objects for each link segment to be used in calculateSegmentCost()
breakAt(E, V, CoordinateReferenceSystem) - Method in interface org.goplanit.utils.network.layer.modifier.UntypedDirectedGraphLayerModifier: Break the passed in link by inserting the passed in node in between.
breakAt(List<E>, V, CoordinateReferenceSystem) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Break the passed in links by inserting the passed in node in between.
breakAt(List<E>, V, CoordinateReferenceSystem) - Method in interface org.goplanit.utils.network.layer.modifier.UntypedDirectedGraphLayerModifier: Break the passed in links by inserting the passed in node in between.
breakEdgeAt(DirectedVertex, Ex, PlanitJtsCrsUtils) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Identical to the GraphImpl implementation except that we now also account for the edge segments present on the edge.
breakEdgeAt(Vertex, Ex, PlanitJtsCrsUtils) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Break the passed in edge by inserting the passed in vertex in between.
breakEdgeAt(V, Ex, PlanitJtsCrsUtils) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: Break the passed in edge by inserting the passed in vertex in between.
BreakEdgeEvent - Class in org.goplanit.graph.modifier.event: Wrapper around break edge event
BreakEdgeEvent(GraphModifier<?, ?>, Vertex, Edge, Edge) - Constructor for class org.goplanit.graph.modifier.event.BreakEdgeEvent: Constructor
breakEdgesAt(List<Ex>, DirectedVertex, CoordinateReferenceSystem) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Break the passed in edges by inserting the passed in vertex in between.
breakEdgesAt(List<Ex>, Vertex, CoordinateReferenceSystem) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Break the passed in edges by inserting the passed in vertex in between.
breakEdgesAt(List<Ex>, V) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: Break the passed in edges by inserting the passed in vertex in between.
breakEdgesAt(List<Ex>, V, CoordinateReferenceSystem) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: Break the passed in edges by inserting the passed in vertex in between.
BreakEdgeSegmentEvent - Class in org.goplanit.graph.modifier.event: Wrapper around break edge segment event
BreakEdgeSegmentEvent(DirectedGraphModifier, DirectedVertex, EdgeSegment) - Constructor for class org.goplanit.graph.modifier.event.BreakEdgeSegmentEvent: constructor
breakLinksAt(List<E>, V, CoordinateReferenceSystem) - Method in interface org.goplanit.utils.network.layer.modifier.UntypedDirectedGraphLayerModifier: Break the passed in links by inserting the passed in node in between.
breakLinksWithInternalConnections() - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: whenever we find that internal nodes are used by more than one link OR a node is an extreme node on an existing link but also an internal link on another node, we break the links where this node is internal.
breakLinksWithInternalNode(Node) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: whenever we find that internal nodes are used by more than one link OR a node is an extreme node on an existing link but also an internal link on another node, we break the links where this node is internal.
breakLinksWithInternalNode(Node, List<Link>, MacroscopicNetworkLayer, CoordinateReferenceSystem) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Check if we should break any links for the passed in node and if so, do it
BRIDLEWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
BRIDLEWAY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
BRITISH_VIRGIN_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
BRUNEI - Static variable in class org.goplanit.utils.locale.CountryNames
build() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: Build the traffic assignment
build() - Method in class org.goplanit.path.choice.PathChoiceBuilder: Build the path choice
build() - Method in class org.goplanit.utils.builder.Builder: Build an instance of class T
Builder<T> - Class in org.goplanit.utils.builder: Builder class to build something of type T
Builder(Class<T>) - Constructor for class org.goplanit.utils.builder.Builder: Constructor
builders - Variable in class org.goplanit.project.ProjectAssignmentBuilders: The traffic assignment(s) registered on this project
buildSubComponents(StochasticPathChoice) - Method in class org.goplanit.path.choice.StochasticPathChoiceBuilder: call to build and configure all sub components of this builder
buildSubComponents(T) - Method in class org.goplanit.assignment.ltm.LtmTrafficAssignmentBuilder: In addition to the super class sub components, we also construct the subcomponents specific to dynamic traffic assignment
buildSubComponents(T) - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: call to build and configure all sub components of this builder
buildSubComponents(T) - Method in class org.goplanit.path.choice.PathChoiceBuilder: call to build and configure all sub components of this builder
BUS - org.goplanit.utils.mode.PredefinedModeType
BUS - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: heavy bus for public transport
BUS_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.BusMode
BUS_STOP - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a bus_stop tag used frequently under PTv1 i.c.w.
BUS_USABLITY_FEATURES - Static variable in class org.goplanit.mode.BusMode
Bush - Class in org.goplanit.assignment.ltm.sltm: A bush is an acyclic directed graph comprising of all implicit paths used by an origin to reach all its destinations.
Bush(Bush) - Constructor for class org.goplanit.assignment.ltm.sltm.Bush: Copy constructor
Bush(IdGroupingToken, OdZone, long) - Constructor for class org.goplanit.assignment.ltm.sltm.Bush: Constructor
BUSH_BASED_DEFAULT - Static variable in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings: default setting for assignment is to apply a bush-based type of implementation over a path based one
bushData - Variable in class org.goplanit.assignment.ltm.sltm.Bush: track bush specific data
BushFlowUpdateConsumer<T extends NetworkFlowUpdateData> - Class in org.goplanit.assignment.ltm.sltm.consumer: Base Consumer to apply during bush based network flow update for each origin bush
BushFlowUpdateConsumer(T) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.BushFlowUpdateConsumer: Constructor
BushTurnData - Class in org.goplanit.assignment.ltm.sltm: Track the turn based data of a bush.
BushTurnData(BushTurnData) - Constructor for class org.goplanit.assignment.ltm.sltm.BushTurnData: copy constructor
BushTurnFlowUpdateConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: Consumer to apply during bush based turn flow update for each non-zero demand bush
BushTurnFlowUpdateConsumer(NetworkTurnFlowUpdateData) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.BushTurnFlowUpdateConsumer: constructor
BusMode - Class in org.goplanit.mode: the predefined bus mode name: bus maxspeed (km/h): 100 pcu: 2 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: PUBLIC
BusMode(IdGroupingToken) - Constructor for class org.goplanit.mode.BusMode: Constructor for bus mode
BUSWAY - Static variable in class org.goplanit.osm.tags.OsmBusWayTags: busway, used as key busway=
BUSWAY_BOTH - Static variable in class org.goplanit.osm.tags.OsmBusWayTags
BUSWAY_LEFT - Static variable in class org.goplanit.osm.tags.OsmBusWayTags
BUSWAY_RIGHT - Static variable in class org.goplanit.osm.tags.OsmBusWayTags
BUSWAY_SCHEME_KEYTAGS - Static variable in class org.goplanit.osm.tags.OsmBusWayTags: busway scheme compatible busway busway:both busway:left busway:right

C

CALCULATED_SPEED - org.goplanit.output.property.OutputPropertyType
CalculatedSpeedOutputProperty - Class in org.goplanit.output.property: Calculate speed output property class
CalculatedSpeedOutputProperty() - Constructor for class org.goplanit.output.property.CalculatedSpeedOutputProperty
CALENDAR - org.goplanit.gtfs.enums.GtfsObjectType
CALENDAR_DATE - org.goplanit.gtfs.enums.GtfsObjectType
CALENDAR_DATES - org.goplanit.gtfs.enums.GtfsFileType
CALENDARS - org.goplanit.gtfs.enums.GtfsFileType
callForEachFileIn(String, Consumer<File>) - Static method in class org.goplanit.utils.misc.FileUtils: Call the callback for each file in the directory provided
callForEachFileInResourceDir(String, BiConsumer<InputStreamReader, String>) - Static method in class org.goplanit.osm.defaults.CountrySpecificDefaultUtils: Call consumer for each country specific file in resource dir
callVoidMethod(T, String, Object...) - Method in class org.goplanit.utils.builder.Configurator: Call a void method on the toConfigure class instance
canConvertTo(Unit) - Method in class org.goplanit.utils.unit.GroupUnit: Verify if unit can be converted to the desired unit
canConvertTo(Unit) - Method in class org.goplanit.utils.unit.SimpleUnit: Verify if unit can be converted to the desired unit
canConvertTo(Unit) - Method in class org.goplanit.utils.unit.SrsUnit: Verify if unit can be converted to the desired unit
canConvertTo(Unit) - Method in interface org.goplanit.utils.unit.Unit: Verify if unit can be converted to the desired unit
canHandleMultipleIterations() - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Flag to indicate whether an implementation can handle multiple iterations If this returns false, acts as though OutputConfiguration.setPersistOnlyFinalIteration() is set to true
canHandleMultipleIterations() - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Flag to indicate whether an implementation can handle multiple iterations If this returns false, acts as though OutputConfiguration.setPersistOnlyFinalIteration() is set to true
canHandleMultipleIterations() - Method in interface org.goplanit.output.formatter.OutputFormatter: Flag to indicate whether an implementation can handle multiple iterations If this returns false, acts as though OutputConfiguration.setPersistOnlyFinalIteration() is set to true
canHandleMultipleIterations() - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Flag to indicate whether an implementation can handle multiple iterations If this returns false, acts as though OutputConfiguration.setPersistOnlyFinalIteration() is set to true
CAPACITY_HOUR - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
CAPACITY_PER_LANE - org.goplanit.output.property.OutputPropertyType
CAPACITY_PER_LANE - org.goplanit.tntp.enums.NetworkFileColumnType
CapacityPeriod - Enum in org.goplanit.tntp.enums
CapacityPerLaneOutputProperty - Class in org.goplanit.output.property: Capacity per lane in pcu/h
CapacityPerLaneOutputProperty() - Constructor for class org.goplanit.output.property.CapacityPerLaneOutputProperty
capacityPerLanePcuHourLane - Variable in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Maximum flow, i.e.
capacityScalingFactors - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: the scaling factor to scale sending flows up to capacity per in link segment
CAR - org.goplanit.utils.mode.PredefinedModeType
CAR_HIGH_OCCUPANCY - org.goplanit.utils.mode.PredefinedModeType
CAR_HOV_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.CarHighOccupancyMode
CAR_HOV_USABLITY_FEATURES - Static variable in class org.goplanit.mode.CarHighOccupancyMode
CAR_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.CarMode
CAR_SHARE - org.goplanit.utils.mode.PredefinedModeType
CAR_SHARE_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.CarShareMode
CAR_SHARE_USABLITY_FEATURES - Static variable in class org.goplanit.mode.CarShareMode
CAR_USABLITY_FEATURES - Static variable in class org.goplanit.mode.CarMode
CARAVAN - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: vehicle towing a caravan
CarHighOccupancyMode - Class in org.goplanit.mode: the predefined car hov mode name: car_hov maxspeed (km/h): 130 pcu: 1 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: HIGH_OCCUPANCY
CarHighOccupancyMode(IdGroupingToken) - Constructor for class org.goplanit.mode.CarHighOccupancyMode: Constructor for car hov mode
CarMode - Class in org.goplanit.mode: the predefined car mode name: car maxspeed (km/h): 130 pcu: 1 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: PRIVATE
CarMode(IdGroupingToken) - Constructor for class org.goplanit.mode.CarMode: Constructor for car mode
CARRIAGE - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: horse and carriage
CarShareMode - Class in org.goplanit.mode: the predefined car share mode name: car maxspeed (km/h): 130 pcu: 1 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: RIDE_SHARE
CarShareMode(IdGroupingToken) - Constructor for class org.goplanit.mode.CarShareMode: Constructor for car share mode
CARTESIANCRS - Static variable in class org.goplanit.io.geo.PlanitOpenGisUtils: In absence of a geographic crs we can also use cartesian: GENERIC_2D
CARTESIANCRS - Static variable in class org.goplanit.utils.geo.PlanitJtsCrsUtils: In absence of a geographic crs we can also use cartesian: GENERIC_2D
CAYMAN_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
centroid - Variable in class org.goplanit.zoning.ZoneImpl: Centroid of the zone
Centroid - Interface in org.goplanit.utils.zoning: A centroid is a special type of vertex representing the location of departure/arrival of traffic in a zone
centroidFactory - Variable in class org.goplanit.zoning.ZoneFactoryImpl: container to use
CentroidFactory - Interface in org.goplanit.utils.zoning: Factory interface for centroids
CentroidFactoryImpl - Class in org.goplanit.zoning: Factory for creating centroids
CentroidFactoryImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.CentroidFactoryImpl: Constructor
CentroidImpl - Class in org.goplanit.zoning: Centroid implementation
CentroidImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.CentroidImpl: Constructor
CentroidImpl(IdGroupingToken, Zone) - Constructor for class org.goplanit.zoning.CentroidImpl: Constructor
CentroidImpl(CentroidImpl) - Constructor for class org.goplanit.zoning.CentroidImpl: Copy constructor
CharacterUtils - Class in org.goplanit.utils.misc: character utility class
CharacterUtils() - Constructor for class org.goplanit.utils.misc.CharacterUtils
checkForEmptyComponents() - Method in class org.goplanit.assignment.TrafficAssignment: Check if any components are undefined, if so throw exception
CIRCULAR - Static variable in class org.goplanit.osm.tags.OsmJunctionTags
clear() - Method in class org.goplanit.demands.Demands.TimePeriods: Clear all entries from map
clear() - Method in class org.goplanit.demands.Demands.TravelerTypes: Clear all entries from map
clear() - Method in class org.goplanit.demands.Demands.UserClasses: Clear all entries from map
clear() - Method in class org.goplanit.network.virtual.ConnectoidEdgesImpl: clear the container
clear() - Method in class org.goplanit.network.virtual.ConnectoidSegmentsImpl: clear the container
clear() - Method in class org.goplanit.network.virtual.VirtualNetwork: free up memory by clearing contents for garbage collection
clear() - Method in interface org.goplanit.utils.wrapper.MapWrapper: Clear all entries from map
clear() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Clear all entries from map
clearLegs() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Clear all legs from the trip
clearLegs() - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Clear all legs from the trip
clearOsmCircularWays() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: remove all registered osm circular ways
clearRelativeLegTimings() - Method in interface org.goplanit.service.routed.RoutedTripSchedule: Clear all leg timings from the trip
clearRelativeLegTimings() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Clear all leg timings from the trip
clearXmlContent() - Method in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: mark the xml root element for garbage collection
CLOCKWISE - Static variable in class org.goplanit.osm.tags.OsmDirectionTags
clone() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Create a shallow copy of this entity
clone() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm: Create a shallow copy of this entity
clone() - Method in class org.goplanit.assignment.ltm.LtmAssignment: Create a shallow copy of this entity
clone() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Create a shallow copy of this entity
clone() - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData
clone() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Create a shallow copy of this entity
clone() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
clone() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData
clone() - Method in class org.goplanit.assignment.SimulationData
clone() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Create a shallow copy of this entity
clone() - Method in class org.goplanit.component.PlanitComponent: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost
clone() - Method in class org.goplanit.cost.physical.initial.ManualInitialLinkSegmentCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Create a shallow copy of this entity
clone() - Method in class org.goplanit.demands.Demands: Create a shallow copy of this entity
clone() - Method in class org.goplanit.demands.Demands.TimePeriods: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.demands.Demands.TravelerTypes: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.demands.Demands.UserClasses: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.gap.GapFunction: Create a shallow copy of this entity
clone() - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Create a shallow copy of this entity
clone() - Method in class org.goplanit.gap.NormBasedGapFunction: Create a shallow copy of this entity
clone() - Method in class org.goplanit.gap.StopCriterion: clone this instance
clone() - Method in interface org.goplanit.graph.directed.acyclic.ACyclicSubGraph: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.directed.DirectedEdgesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.directed.DirectedVerticesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.directed.EdgeSegmentsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.graph.directed.UntypedDirectedGraphImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.EdgeImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.EdgesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.graph.GraphEntitiesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.graph.GraphImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.UntypedGraphImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.VertexImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.graph.VerticesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.mode.ModesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Clone this instance
clone() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.physical.LinkImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.physical.LinkSegmentsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.physical.LinksImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.physical.NodeImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.physical.NodesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.service.ServiceLegSegmentsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.service.ServiceLegsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.service.ServiceNodeImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.service.ServiceNodesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.TopologicalLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.TransportLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layer.UntypedPhysicalLayerImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.layers.MacroscopicNetworkLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layers.ServiceNetworkLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layers.TopologicalLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layers.TransportLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.layers.UntypedPhysicalNetworkLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.Network: Clone the network
clone() - Method in class org.goplanit.network.virtual.ConnectoidEdgesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.od.demand.OdDemandMatrix: Create a shallow copy of this entity
clone() - Method in class org.goplanit.od.path.OdPathMatrix: Create a shallow copy of this entity
clone() - Method in class org.goplanit.od.path.OdPathsHashed: Create a shallow copy of this entity
clone() - Method in class org.goplanit.od.skim.OdSkimMatrix: Create a shallow copy of this entity
clone() - Method in class org.goplanit.osm.defaults.OsmLaneDefaults
clone() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaults
clone() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory
clone() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: clone
clone() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: clone this class instance
clone() - Method in class org.goplanit.path.choice.logit.LogitChoiceModel: Create a shallow copy of this entity
clone() - Method in class org.goplanit.path.choice.logit.MultinomialLogit: Create a shallow copy of this entity
clone() - Method in class org.goplanit.path.choice.PathChoice: Create a shallow copy of this entity
clone() - Method in class org.goplanit.path.choice.StochasticPathChoice: Create a shallow copy of this entity
clone() - Method in class org.goplanit.path.DirectedPathsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.path.OdPathSets: Create a shallow copy of this entity
clone() - Method in class org.goplanit.project.ProjectDemands: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.project.ProjectNetworks: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.project.ProjectOdPathSets: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.project.ProjectRoutedServices: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.project.ProjectServiceNetworks: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.project.ProjectZonings: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.sdinteraction.smoothing.MSASmoothing: Create a shallow copy of this entity
clone() - Method in class org.goplanit.sdinteraction.smoothing.Smoothing: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RelativeLegTiming: Clone this class
clone() - Method in interface org.goplanit.service.routed.RoutedModeServices: Force clone implementation
clone() - Method in class org.goplanit.service.routed.RoutedModeServicesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.service.routed.RoutedService: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RoutedServices: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.service.routed.RoutedServicesLayers: Force clone implementation
clone() - Method in class org.goplanit.service.routed.RoutedServicesLayersImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Be able to clone a RoutedServicetripInfo instance
clone() - Method in class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Be able to clone a RoutedServicetripInfo instance
clone() - Method in class org.goplanit.service.routed.RoutedTripDeparture: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.service.routed.RoutedTripDepartures: Force clone implementation
clone() - Method in class org.goplanit.service.routed.RoutedTripDeparturesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RoutedTripImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.service.routed.RoutedTripsFrequency: Force clone implementation
clone() - Method in class org.goplanit.service.routed.RoutedTripsFrequencyImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.service.routed.RoutedTripsSchedule: Force clone implementation
clone() - Method in class org.goplanit.service.routed.RoutedTripsScheduleImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Clone the fundamental diagram
clone() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: Clone a branch
clone() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Create a shallow copy of this entity
clone() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: Clone the fundamental diagram
clone() - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Clone a branch
clone() - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Clone the fundamental diagram
clone() - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Create a shallow copy of this entity
clone() - Method in class org.goplanit.supply.network.nodemodel.NodeModelComponent: Create a shallow copy of this entity
clone() - Method in class org.goplanit.supply.network.nodemodel.TampereNodeModelComponent: Create a shallow copy of this entity
clone() - Method in class org.goplanit.time.TimePeriodImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.userclass.TravelerType: Create a shallow copy of this entity
clone() - Method in class org.goplanit.userclass.UserClass: Create a shallow copy of this entity
clone() - Method in class org.goplanit.utils.event.EventImpl: While events are id able, they cannot be cloned.
clone() - Method in interface org.goplanit.utils.graph.directed.DirectedSubGraph: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.graph.directed.DirectedVertices: clone vertices
clone() - Method in interface org.goplanit.utils.graph.directed.EdgeSegments: clone edge segments
clone() - Method in interface org.goplanit.utils.graph.Edge: Clone the edge as is, all shared members are shallow copied, fully owned members are deep copied
clone() - Method in interface org.goplanit.utils.graph.Edges: clone edges
clone() - Method in interface org.goplanit.utils.graph.EdgeSegment: Clone the edge segment
clone() - Method in interface org.goplanit.utils.graph.GraphEntities: Force clone implementation
clone() - Method in interface org.goplanit.utils.graph.ManagedGraphEntities: Force clone implementation
clone() - Method in class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.graph.Vertex: Clone the vertex
clone() - Method in interface org.goplanit.utils.graph.Vertices: clone vertices
clone() - Method in class org.goplanit.utils.id.ExternalIdAbleImpl: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.id.IdAble: Create a shallow copy of this entity
clone() - Method in class org.goplanit.utils.id.IdAbleImpl: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.id.ManagedIdEntities: Force clone implementation
clone() - Method in class org.goplanit.utils.id.ManagedIdEntitiesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.utils.mode.Modes: clone modes container
clone() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Clone this instance
clone() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegments: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypes: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.physical.Links: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegments: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.physical.Nodes: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.service.ServiceLegs: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.service.ServiceLegSegments: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layer.service.ServiceNodes: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.layers.MacroscopicNetworkLayers: clone container
clone() - Method in interface org.goplanit.utils.network.layers.ServiceNetworkLayers: clone container
clone() - Method in interface org.goplanit.utils.network.layers.TopologicalLayers: clone container
clone() - Method in interface org.goplanit.utils.network.layers.TransportLayers: clone container
clone() - Method in interface org.goplanit.utils.network.layers.UntypedDirectedGraphLayers: clone container
clone() - Method in interface org.goplanit.utils.network.layers.UntypedPhysicalNetworkLayers: clone container
clone() - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdges: Force clone implementation
clone() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegments: Force clone implementation
clone() - Method in class org.goplanit.utils.od.OdDataImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.utils.od.OdHashedImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.utils.od.OdMatrixImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.utils.od.OdPrimitiveMatrix: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.path.DirectedPaths: Force clone implementation
clone() - Method in class org.goplanit.utils.wrapper.LongMapWrapperImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.utils.wrapper.MapWrapper: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in interface org.goplanit.utils.zoning.DirectedConnectoids: Force clone implementation
clone() - Method in interface org.goplanit.utils.zoning.OdZones: Force clone implementation
clone() - Method in interface org.goplanit.utils.zoning.TransferZone: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Create a shallow copy of this entity
clone() - Method in interface org.goplanit.utils.zoning.TransferZoneGroups: Force clone implementation
clone() - Method in interface org.goplanit.utils.zoning.TransferZones: Force clone implementation
clone() - Method in interface org.goplanit.utils.zoning.UndirectedConnectoids: Force clone implementation
clone() - Method in interface org.goplanit.utils.zoning.Zone: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.CentroidImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.ConnectoidImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.ConnectoidsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.DirectedConnectoidImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.DirectedConnectoidsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.OdZoneImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.OdZonesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.TransferZoneGroupImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.TransferZoneGroupsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.TransferZoneImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.TransferZonesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.UndirectedConnectoidsImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.ZoneImpl: Create a shallow copy of this entity
clone() - Method in class org.goplanit.zoning.ZonesImpl: Each map wrapper should be cloneable where the contents are references of the original where possible but the underlying map itself is newly created
clone() - Method in class org.goplanit.zoning.Zoning: Create a shallow copy of this entity
clone(T) - Static method in class org.goplanit.utils.misc.CloneUtils: clone an object by using the serialise/deserialise methods in this class.
CloneUtils - Class in org.goplanit.utils.misc: Some utility methods to use serialization to allow for deep copy cloning without knowing anything about the objects type
CloneUtils() - Constructor for class org.goplanit.utils.misc.CloneUtils
close() - Method in class org.goplanit.utils.zip.PlanitZipFileInputStream: close the streams
close() - Method in class org.goplanit.utils.zip.PlanitZipInputStream: close the streams
closeLogger(Logger) - Static method in class org.goplanit.logging.Logging: Close the current logger
COACH - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: bus for long distance non public transport
collectAllowedOsmHighwayModes(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Collect all Osm modes that are allowed for the given osmHighway type as configured by the user
collectAllowedOsmRailwayModes(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Collect all Osm modes that are allowed for the given osmRailway type as configured by the user
collectAllowedOsmWayModes(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: collect all allowed modes on the given OSM way
collectAllowedOsmWayModes(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: collect all allowed modes on the given OSM way
collectAllowedOsmWayModes(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: collect all allowed modes on the given OSM way
collectAllowedOsmWayModes(String, Collection<String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Collect all Osm modes from the passed in options that are allowed for the given osmWay type
collectCsvRecordIterable(File) - Static method in class org.goplanit.osm.defaults.CountrySpecificDefaultUtils: collect an iterable given that each country specific file is in CSV format
collectCsvRecordIterable(Reader) - Static method in class org.goplanit.osm.defaults.CountrySpecificDefaultUtils: Collect an iterable for the given reader
collectEligibleOsmModesOnPtOsmEntity(long, Map<String, String>) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the modes that are deemed eligible for this node (platform, station, halt, etc.).
collectEligibleOsmModesOnPtOsmEntity(long, Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the modes that are deemed eligible for this node (platform, station, halt, etc.).
collectEligibleOsmModesOnPtOsmEntity(Map<String, String>, Set<String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the OSM modes that are deemed eligible for this entity (platform, station, halt, etc.).
collectEligibleOsmPublicTransportModesOnPtOsmEntity(long, Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the public transport modes that are deemed eligible for this node (platform, station, halt, etc.).
collectEligibleOsmRailModesOnPtOsmEntity(Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the rail modes that are deemed eligible for this node (platform, station, halt, etc.).
collectEligibleOsmRoadModesOnPtOsmEntity(long, Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the rail modes that are deemed eligible for this entity (platform, station, halt, etc.).
collectEligibleOsmWaterModesOnPtOsmEntity(Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect the water modes that are deemed eligible for this entity (platform, station, halt, etc.).
collectGlobalToken() - Static method in class org.goplanit.utils.id.IdGroupingToken: We have one default global token available for ids that are globally managed rather than within some container.
collectMappedPlanitModes(String, String, OsmNetworkReaderSettings) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: collect the PLANit mode that are mapped, i.e., are marked to be activated in the final network.
collectModesFromPtEntity(long, Map<String, String>, String) - Method in class org.goplanit.osm.converter.zoning.handler.helper.OsmPublicTransportModeHelper: collect the eligible modes both OSM and mapped PLANit modes for the given OSM entity representing pt infrastructure.
collectParameterTypes(Object...) - Method in class org.goplanit.utils.builder.Configurator: collect the parameter types of the passed in object in their original order
collectPublicTransportModesFromPtEntity(long, Map<String, String>, String) - Method in class org.goplanit.osm.converter.zoning.handler.helper.OsmPublicTransportModeHelper: collect the pt modes both OSM and mapped PLANit modes for a pt entity.
collectTotalNetworkSegmentFlow(LinkSegment) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Return the total flow through a link segment across all modes
collectTotalNetworkSegmentFlows() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: determine the total flow across all link segments across all modes
COMMA - Static variable in class org.goplanit.utils.misc.CharacterUtils: a comma ','
commaSeparator - Variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: tuple separator, default is CharacterUtils.COMMA
comparatorByStartTime() - Static method in class org.goplanit.utils.time.TimePeriodUtils: custom comparator not by id but based on the start time and when equal duration
compareHighwayType(String, String) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: Compare highway types where we return a negative, zero, or positive value when highwayType is less, equal, or more important than the other
compareTo(OutputProperty) - Method in class org.goplanit.output.property.OutputProperty: compareTo method used to order the output columns when output is being written
compareTo(IdAble) - Method in interface org.goplanit.utils.id.IdAble: Compare based on id
complete() - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler
complete() - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: complete the parsing, invoked from parent handler complete method
complete() - Method in class org.goplanit.osm.converter.network.OsmNetworkPreProcessingHandler
complete() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPostProcessingHandler
complete() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPreProcessingHandler
complete() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler
componentSuperTypeCanonicalName - Variable in class org.goplanit.component.PlanitComponentFactory: instance of the super component class this factory creates subclass instances for
computeAbsFlowRate(CumulativePoint) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Compute the absolute flow rate in cumulative units/h
computeAbsFlowRate(CumulativePoint) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Compute the absolute flow rate in cumulative units/h
computeBackwardWaveSpeedForCapacity(double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Compute the backward wave speed that goes with a given capacity keeping all other variables the same
computeCostInHours(MacroscopicLinkSegment, Mode, double) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: BPR function computation for.
computeFreeFlowTravelTimeHour(Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Compute the free flow travel time by mode, i.e.
computeFreeFlowTravelTimeHour(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Compute the free flow travel time by mode, i.e.
computeGap() - Method in class org.goplanit.gap.GapFunction: Compute the gap and return it
computeGap() - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Compute the gap and return it
computeGap() - Method in class org.goplanit.gap.NormBasedGapFunction: Compute the gap
computeMinMaxShortestPaths(double[], int) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Compute the min-max path tree rooted at the origin and given the provided (network wide) costs.
computeOverlappingAcceptedFlow(Bush, boolean, double[]) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Check if bush is overlapping with one of the alternatives, and if it is how much sending flow this sub-path currently represents
computeSubPathAcceptedFlow(DirectedVertex, DirectedVertex, EdgeSegment[], double[]) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Determine the accepted flow between origin,destination vertex using the subpath given by the subPathArray in order from start to finish.
computeSubPathSendingFlow(DirectedVertex, DirectedVertex, Map<DirectedVertex, EdgeSegment>) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Determine the sending flow between origin,destination vertex using the subpath given by the subPathMap, where each vertex provides its exit segment.
computeSubPathSendingFlow(DirectedVertex, DirectedVertex, EdgeSegment[]) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Determine the sending flow between origin,destination vertex using the subpath given by the subPathArray in order from start to finish.
computeSubPathSendingFlow(DirectedVertex, DirectedVertex, EdgeSegment[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: Determine the sending flow between origin,destination vertex using the subpath given by the subPathArray in order from start to finish.
computeSurfaceUnderCurve() - Method in class org.goplanit.utils.cumulatives.PiecewiseLinearCumulativeCurve: the total surface under this curve
concatenate(LineString...) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: concatenate the passed in gemoetries (lines strings) by simply copying all the coorcinates in order and create a new line string from these points
CONDITIONALLY_REQUIRED - org.goplanit.gtfs.enums.GtfsFileTypePresence
Configurator<T> - Class in org.goplanit.utils.builder: This is the base class for all configuration oriented proxy classes.
Configurator(Class<T>) - Constructor for class org.goplanit.utils.builder.Configurator: Constructor
configure(AbstractPhysicalCost) - Method in class org.goplanit.cost.physical.PhysicalCostConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends PhysicalCost
configure(AbstractVirtualCost) - Method in class org.goplanit.cost.virtual.VirtualCostConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends VirtualCost
configure(GapFunction) - Method in class org.goplanit.gap.GapFunctionConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends GapFunction
configure(StopCriterion) - Method in class org.goplanit.gap.StopCriterionConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends GapFunction
configure(LogitChoiceModel) - Method in class org.goplanit.path.choice.logit.LogitChoiceModelConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends logit choice model
configure(PathChoice) - Method in class org.goplanit.path.choice.PathChoiceConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends Smoothing
configure(Smoothing) - Method in class org.goplanit.sdinteraction.smoothing.SmoothingConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends Smoothing
configure(FundamentalDiagramComponent) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends FundamentalDiagram
configure(NodeModelComponent) - Method in class org.goplanit.supply.network.nodemodel.NodeModelConfigurator: Needed to avoid issues with generics, although it should be obvious that T extends NodeModel
configure(T) - Method in class org.goplanit.utils.builder.Configurator: Configure the passed in instance with the registered method calls
CONNECTIVITY - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
Connectoid - Interface in org.goplanit.utils.zoning: the connecting component between zone(s) and the network.
CONNECTOID_EDGE_ID_CLASS - Static variable in interface org.goplanit.utils.network.virtual.ConnectoidEdge: additional id class for generating connectoid edge ids
CONNECTOID_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.Connectoid: the class ot use for id generation
CONNECTOID_SEGMENT_ID_CLASS - Static variable in interface org.goplanit.utils.network.virtual.ConnectoidSegment: additional id class for generating connectoid segment ids
ConnectoidEdge - Interface in org.goplanit.utils.network.virtual: the connecting component between centroid and a first physical node in the network.
ConnectoidEdgeFactory - Interface in org.goplanit.utils.network.virtual: Factory interface for connectoid edges
ConnectoidEdgeFactoryImpl - Class in org.goplanit.network.virtual: Factory for creating connectoid edges on connectoid edge container
ConnectoidEdgeFactoryImpl(IdGroupingToken, GraphEntities<ConnectoidEdge>) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgeFactoryImpl: Constructor
connectoidEdgeId - Variable in class org.goplanit.network.virtual.ConnectoidEdgeImpl: unique internal identifier across connectoid edges
ConnectoidEdgeImpl - Class in org.goplanit.network.virtual: Edge implementation that represent edges that exist between centroids and connectoids (their node reference), so not physical entities but rather virtual links
ConnectoidEdgeImpl(ConnectoidEdgeImpl) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgeImpl: Copy constructor
ConnectoidEdgeImpl(IdGroupingToken, Centroid, DirectedVertex, double) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgeImpl: Constructor
connectoidEdges - Variable in class org.goplanit.network.virtual.VirtualNetwork: Container for connectoid edges
ConnectoidEdges - Interface in org.goplanit.utils.network.virtual: Container to register and manager connectoid edges.
ConnectoidEdgesImpl - Class in org.goplanit.network.virtual: Connectoid edge container implementation
ConnectoidEdgesImpl(ConnectoidEdgesImpl) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgesImpl: Copy constructor
ConnectoidEdgesImpl(IdGroupingToken) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgesImpl: Constructor
ConnectoidEdgesImpl(IdGroupingToken, ConnectoidEdgeFactory) - Constructor for class org.goplanit.network.virtual.ConnectoidEdgesImpl: Constructor
ConnectoidHelper - Class in org.goplanit.osm.converter.zoning.handler.helper: Class to provide functionality for parsing PLANit connectoids from OSM entities
ConnectoidHelper(Zoning, OsmZoningReaderData, OsmPublicTransportReaderSettings, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: Constructor
ConnectoidImpl - Class in org.goplanit.zoning: connectoid connecting one or more (transfer/OD) zone(s) to the physical road network, the type of connectoid depends on the implementing class
ConnectoidImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.ConnectoidImpl: Constructor
ConnectoidImpl(IdGroupingToken, Zone) - Constructor for class org.goplanit.zoning.ConnectoidImpl: Constructor
ConnectoidImpl(IdGroupingToken, Zone, double) - Constructor for class org.goplanit.zoning.ConnectoidImpl: Constructor
ConnectoidImpl(ConnectoidImpl) - Constructor for class org.goplanit.zoning.ConnectoidImpl: Copy constructor
ConnectoidImpl.AccessZoneProperties - Class in org.goplanit.zoning: Stores access properties for each zone
Connectoids<T extends Connectoid> - Interface in org.goplanit.utils.zoning: Container to register and manager connectoids that define the points of access for zones regarding infrastructure network (layer)
connectoidsByAccessVertex - Variable in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: index all connectoids by access vertex to minimise lookups
ConnectoidSegment - Interface in org.goplanit.utils.network.virtual: Connectoid segment represents a directional virtual segment connecting a centroid and a physical node.
ConnectoidSegmentFactory - Interface in org.goplanit.utils.network.virtual: Factory interface for connectoid segments
ConnectoidSegmentFactoryImpl - Class in org.goplanit.network.virtual: Factory for creating connectoid segments on connectoid segments container
ConnectoidSegmentFactoryImpl(IdGroupingToken, GraphEntities<ConnectoidSegment>) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentFactoryImpl: Constructor
ConnectoidSegmentImpl - Class in org.goplanit.network.virtual: The link segment that connects a zone to the physical network is not a physical link segment.
ConnectoidSegmentImpl(ConnectoidSegmentImpl) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentImpl: Copy constructor
ConnectoidSegmentImpl(IdGroupingToken, ConnectoidEdge, boolean) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentImpl: Constructor
connectoidSegments - Variable in class org.goplanit.network.virtual.VirtualNetwork: Container for connectoid edge segments
ConnectoidSegments - Interface in org.goplanit.utils.network.virtual: Container to register and manager connectoids that define the points of access for zones regarding infrastructure network (layer)
ConnectoidSegmentsImpl - Class in org.goplanit.network.virtual: Connectoid segments container implementation
ConnectoidSegmentsImpl(ConnectoidSegmentsImpl) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Copy constructor
ConnectoidSegmentsImpl(IdGroupingToken) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Constructor
ConnectoidSegmentsImpl(IdGroupingToken, ConnectoidSegmentFactory) - Constructor for class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Constructor
ConnectoidsImpl<T extends Connectoid> - Class in org.goplanit.zoning: Base implementation of Connectoids container and factory class
ConnectoidsImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.ConnectoidsImpl: Constructor
ConnectoidsImpl(ConnectoidsImpl<T>) - Constructor for class org.goplanit.zoning.ConnectoidsImpl: Copy constructor
ConnectoidType - Enum in org.goplanit.utils.zoning: Types of connectoids to more easily identify their purpose
connectVerticesToEdge(Edge) - Method in class org.goplanit.network.transport.TransportModelNetwork: Add Edge to both vertices
connectVerticesToEdgeSegment(EdgeSegment) - Method in class org.goplanit.network.transport.TransportModelNetwork: Add edge segment to the incoming or outgoing set of edge segments for the related vertices
CONSTRUCTION - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
CONSTRUCTION - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: general tag indication this is under construction, parser should ignore this
CONSTRUCTION - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
consumeCentroidResult(DirectedVertex, double[]) - Method in interface org.goplanit.assignment.ltm.sltm.consumer.ApplyToNodeModelResult: A centroid node is a special node where all flow is always accepted (destination incoming links), or sending flows do not come from turns but from origin zone (origin exit links).
consumeCentroidResult(DirectedVertex, double[]) - Method in class org.goplanit.assignment.ltm.sltm.consumer.UpdateEntryLinksOutflowConsumer: A centroid node is a special node where all flow is always accepted (destination incoming links), or sending flows do not come from turns but from origin zone (origin exit links).
consumeCentroidResult(DirectedVertex, double[]) - Method in class org.goplanit.assignment.ltm.sltm.consumer.UpdateExitLinkInflowsConsumer: A centroid node is a special node where all flow is always accepted (destination incoming links), or sending flows do not come from turns but from origin zone (origin exit links).
consumeRegularResult(DirectedVertex, Array1D<Double>, Array2D<Double>) - Method in interface org.goplanit.assignment.ltm.sltm.consumer.ApplyToNodeModelResult: Result of a node model update
consumeRegularResult(DirectedVertex, Array1D<Double>, Array2D<Double>) - Method in class org.goplanit.assignment.ltm.sltm.consumer.UpdateEntryLinksOutflowConsumer: Result of a node model update
consumeRegularResult(DirectedVertex, Array1D<Double>, Array2D<Double>) - Method in class org.goplanit.assignment.ltm.sltm.consumer.UpdateExitLinkInflowsConsumer: Result of a node model update
ContainerisedDirectedPathFactory - Interface in org.goplanit.utils.path: Factory interface for directed paths
ContainerisedDirectedPathFactoryImpl - Class in org.goplanit.path: Factory for creating directed paths on container
ContainerisedDirectedPathFactoryImpl(IdGroupingToken, DirectedPaths) - Constructor for class org.goplanit.path.ContainerisedDirectedPathFactoryImpl: Constructor
contains(V) - Method in interface org.goplanit.utils.wrapper.MapWrapper: Check if value is already present
contains(V) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Check if value is already present
CONTAINS_ID - org.goplanit.gtfs.enums.GtfsKeyType
containsAny(BitSet) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Check if any of the set link segments is present on either alternative
containsAny(BitSet, boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Check if any of the set link segments is present on the indicated alternative
containsAnyEdgeSegmentOf(DirectedEdge) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Verify if the bush contains any edge segment of the edge in either direction
containsAnyKey(Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Determine if any of the potential keys is listed in the passed in tags
containsAnyMode(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: Verify if any of the passed in osmModes can be qualified as a rail mode
containsAnyMode(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: Verify if any of the passed in osmModes can be qualified as a road mode
containsAnyMode(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: Verify if any of the passed in osmModes can be qualified as a water mode
containsEdgeSegment(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Verify if the bush contains the given edge segment
containsEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Verify if given edge segment is registered on this subgraph
containsEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedSubGraph: Verify if given edge segment is registered on this subgraph
containsKey(long) - Method in interface org.goplanit.utils.id.ManagedIdEntities: Verify if present
containsKey(long) - Method in interface org.goplanit.utils.wrapper.LongMapWrapper: Verify if entry is present
containsKey(long) - Method in class org.goplanit.utils.wrapper.LongMapWrapperImpl: Verify if entry is present
containsKey(GtfsKeyType) - Method in class org.goplanit.gtfs.model.GtfsObject
containsModifiedLinkSegmentType(Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes: Verify if a modified link segment type with the provided added/removed modes exist
containsModifiedLinkSegmentType(MacroscopicLinkSegmentType, Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes: Verify if a modified link segment type with the provided added/removed modes exist for the given original link segment type
containsPredefinedMode(PredefinedModeType) - Method in class org.goplanit.mode.ModesImpl: verify if predefined mode is registered
containsPredefinedMode(PredefinedModeType) - Method in interface org.goplanit.utils.mode.Modes: verify if predefined mode is registered
containsRoadMode(String) - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: verify of the mode is part of the given Osm mode category
containsSpeedLimit(String) - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: verify if a default speed limit is available for the given type
containsSubPath(Collection<? extends EdgeSegment>) - Method in class org.goplanit.path.DirectedPathImpl: Verify if the path contains the provided subpath.
containsSubPath(Collection<? extends EdgeSegment>) - Method in interface org.goplanit.utils.path.DirectedPath: Verify if the path contains the provided subpath.
containsTurnSendingFlow(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Verify if the provided turn has any registered sending flow
containsTurnSendingFlow(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Check if entry exists
CONTINUOUS_DROP_OFF - org.goplanit.gtfs.enums.GtfsKeyType
CONTINUOUS_PICKUP - org.goplanit.gtfs.enums.GtfsKeyType
convergenceAnalyser - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: analyser to track if loading is converging as expected based on its settings
convert() - Method in class org.goplanit.converter.Converter: Convert the reader's parsed content by passing it on to the writer.
convert() - Method in class org.goplanit.converter.ConverterBase: Convert the reader's content and pass it on to the writer to convert it.
convert() - Method in class org.goplanit.converter.MultiConverter: Convert the reader's parsed content by passing it on to the writer.
convertArgsToMap(String[]) - Static method in class org.goplanit.utils.args.ArgumentParser: Convert program arguments into a Map, with signature: <key>=/-/:<value>, e.g.
convertArgsToMap(String[], ArgumentStyle) - Static method in class org.goplanit.utils.args.ArgumentParser: Convert program arguments into a Map, based on given style
convertArgsToMapDefaultStyle(String[]) - Static method in class org.goplanit.utils.args.ArgumentParser: Convert program arguments into a Map, with signature: <key>=/-/:<value>, e.g.
convertArgsToMapDoubleHyphenStyle(String[]) - Static method in class org.goplanit.utils.args.ArgumentParser: Convert program arguments into a Map, with signature: --<key> <value>, e.g.
Converter<T> - Class in org.goplanit.converter: Convert PLANit entities parsed by a reader from one format and persisted with a writer to another
Converter(ConverterReader<T>, ConverterWriter<T>) - Constructor for class org.goplanit.converter.Converter: constructor
ConverterBase - Class in org.goplanit.converter: Base converter for PLANit entities
ConverterBase(ConverterEntity, ConverterEntity) - Constructor for class org.goplanit.converter.ConverterBase: constructor
ConverterEntity - Interface in org.goplanit.converter: Base interface for classes able to read/write something
ConverterReader<T> - Interface in org.goplanit.converter: Interface for classes able to convert entities of some type which are then returned
ConverterReaderSettings - Interface in org.goplanit.converter: Settings to be derived from this dummy interface for all readers compatible with the converter setup.
ConverterWriter<T> - Interface in org.goplanit.converter: Interface for classes able to write a PLANit entities of given type to disk
ConverterWriterSettings - Interface in org.goplanit.converter: Settings to be derived from this dummy interface for all writers compatible with the converter setup.
convertFromPlanItToXmlGeneratedType(DataType) - Static method in interface org.goplanit.io.xml.converter.EnumConverter: Convert values from Type enumeration in PLANit project to generated Typevalues enumeration
convertFromPlanItToXmlGeneratedUnits(OutputProperty) - Static method in interface org.goplanit.io.xml.converter.EnumConverter: Convert values from Units enumeration in PLANit project to generated Unitsvalues enumeration
convertHoursToSeconds(double) - Static method in class org.goplanit.utils.time.TimePeriodUtils: Convert hours to (whole) seconds
convertHoursToSeconds(String) - Static method in class org.goplanit.utils.time.TimePeriodUtils: Convert duration to seconds given start time using the 24-hour clock
convertHourTo(UnitType, double) - Static method in class org.goplanit.utils.unit.TimeUnit: convert hour to...
convertKmTo(UnitType, double) - Static method in class org.goplanit.utils.unit.DistanceUnit: convert km to...
convertMeterTo(UnitType, double) - Static method in class org.goplanit.utils.unit.DistanceUnit: convert meter to...
convertMinuteTo(UnitType, double) - Static method in class org.goplanit.utils.unit.TimeUnit: convert minute to...
convertModeToRailway(String) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: Convert the rail mode to the related railway type.
convertPcuTo(UnitType, double) - Static method in class org.goplanit.utils.unit.VehiclesUnit: Convert pcu to...
convertRailwayToMode(String) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: Convert the railway to the related mode.
convertSecondsToHours(int) - Static method in class org.goplanit.utils.time.TimePeriodUtils: Convert seconds to 24h format from midnight to seconds
convertSecondTo(UnitType, double) - Static method in class org.goplanit.utils.unit.TimeUnit: convert second to...
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.DistanceUnit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.GroupUnit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.NoneUnit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.SrsUnit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.TimeUnit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in interface org.goplanit.utils.unit.Unit: Convert one unit to the other for a given value
convertTo(Unit, double) - Method in class org.goplanit.utils.unit.VehiclesUnit: Convert one unit to the other for a given value
convertToDirectPositions(Coordinate[]) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Convert JTS coordinates to OpenGIS directPositions
convertToJtsLineString(LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Convert an open gis line string object to a JTS Gis LineString instance by copying the internal coordinates
convertToLineString(MultiLineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Cast a JTS MultiLineString with a single entry into a JTS LineString instance if valid
convertToOpenGisLineString(LineString) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Convert a JTS line string object to an OpenGis LineString instance by transferring the internal coordinates
convertToOpenGisLineString(MultiLineString) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Converts a JTS MultiLineString with a single entry into an OpenGIS LineString instance
convertVehiclesTo(UnitType, double) - Static method in class org.goplanit.utils.unit.VehiclesUnit: Convert vehicles to...
copyCoordinatesFrom(int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: copy the coordinates in the line string starting at the given offset (included)
copyCoordinatesFromUpToNotIncluding(int, int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: copy the coordinates in the line string from-to the given locations, the locations are included
copyCoordinatesUpToNotIncluding(int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: copy the coordinates in the line string until the given location, the location is included
copyTo(double[], double[]) - Static method in class org.goplanit.assignment.ltm.sltm.LinkSegmentData: copy from origin to destination assuming entire array is to be copied and both arrays are of equal size
copyWithoutNullEntries(Coordinate[]) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: copy the array and remove any null entries
CORRIDOR - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
Cost<T extends EdgeSegment> - Interface in org.goplanit.cost: Cost of an EdgeSegment
COST - org.goplanit.output.enums.OdSkimSubOutputType
COST_TIMES_FLOW - org.goplanit.output.property.OutputPropertyType
costPerModeAndLinkSegment - Variable in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Map to store initial cost for each mode and link segment, not linked to a particular time period
CostTimesFlowOutputProperty - Class in org.goplanit.output.property: Cost times flow output property class
CostTimesFlowOutputProperty() - Constructor for class org.goplanit.output.property.CostTimesFlowOutputProperty
count - Variable in class org.goplanit.gap.NormBasedGapFunction: Represents the total entries that were measured so far
countries2ISO - Static variable in class org.goplanit.utils.locale.LocaleUtils: store mapping from full name to iso2 code
countryName - Variable in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: the destination country this writer is configured for
countryName - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: country name for the defaults
countryName - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: country these defaults apply for
CountryNames - Class in org.goplanit.utils.locale: Country names that can be converted into ISO2 codes (work in progress, currently only left hand drive countries present)
CountryNames() - Constructor for class org.goplanit.utils.locale.CountryNames
CountrySpecificDefaultUtils - Class in org.goplanit.osm.defaults: Class with some common functionality for defaults that are country specific and stored in CSV files
CountrySpecificDefaultUtils() - Constructor for class org.goplanit.osm.defaults.CountrySpecificDefaultUtils
countryToEpsgCodes - Static variable in class org.goplanit.utils.epsg.EpsgCodesByCountry: mapping of country names to expected most commonly used EPSG code
create() - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderFactory: Factory method based on all defaults.
create() - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory: Default factory method.
create() - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create() - Static method in class org.goplanit.io.converter.network.PlanitNetworkWriterFactory: Create a PLANitNetworkWriter which can persist a PLANit network in the native PLANit XML format witha ll defaults.
create() - Static method in class org.goplanit.io.converter.zoning.PlanitZoningReaderFactory: Factory method wit all default, expected that user configures the settings afterwards to reach minimum requirements for successful parsing (input dir especially)
create() - Static method in class org.goplanit.matsim.converter.MatsimIntermodalWriterFactory: Create a PLANitMatsimIntermodalWriter which persists PLANit networks and pt infrastructure in MATSIM network format, using all defaults, requires the user to set output directory afterwards
create() - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterFactory: Create a PLANitMatsimWriter which persists PLANit networks in MATSIM network format
create() - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network, zoning and non-locale specific defaults for any right hand driving country
create() - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create() - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: Default factory method for creating global defaults
create() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Factory method to create global defaults only.
create() - Method in interface org.goplanit.utils.zoning.CentroidFactory: Create a new centroid
create() - Method in class org.goplanit.zoning.CentroidFactoryImpl: Create a new centroid
create(double, double, Collection<Mode>) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method
create(double, double, Mode...) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method
create(double, Collection<Mode>) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method adopting saem value for maximum and critical speed
create(double, Mode...) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method adopting default value for critical speed
create(String) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory: Create a PLANitIntermodalWriter which can persist a PLANit network and zoning in the native PLANit XML format.
create(String) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(String) - Static method in class org.goplanit.io.converter.network.PlanitNetworkWriterFactory: Create a PLANitNetworkWriter which can persist a PLANit network in the native PLANit XML format
create(String) - Static method in class org.goplanit.matsim.converter.MatsimIntermodalWriterFactory: Create a PLANitMatsimIntermodalWriter which persists PLANit networks and pt infrastructure in MATSIM network format
create(String) - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterFactory: Create a PLANitMatsimWriter which persists PLANit networks in MATSIM network format
create(String) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network, zoning.
create(String) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(String) - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: Factory method to create defaults based on a given country.
create(String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Factory method to create speed limits for a particular country.
create(String) - Static method in enum org.goplanit.utils.mode.PredefinedModeType: convert string to enum.
create(String, Object[]) - Method in class org.goplanit.component.PlanitComponentFactory: Create PLANit component
create(String, Object[], Object...) - Method in class org.goplanit.component.PlanitComponentFactory: Create PLANit component
create(String, String) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory: Create a PLANitIntermodalWriter which can persist a PLANit network and zoning in the native PLANit XML format
create(String, String) - Static method in class org.goplanit.io.converter.network.PlanitNetworkWriterFactory: Create a PLANitNetworkWriter which can persist a PLANit network in the native PLANit XML format
create(String, String) - Static method in class org.goplanit.matsim.converter.MatsimIntermodalWriterFactory: Create a PLANitMatsimWriter which persists PLANit networks and pt infrastructure in MATSIM network format
create(String, String) - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterFactory: Create a PLANitMatsimWriter which persists PLANit networks in MATSIM network format
create(String, String) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network and zoning
create(String, String) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader which will create its own macroscopic network
create(String, String, MacroscopicNetwork, Zoning) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderFactory: Factory method
create(String, String, ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a Service Network Reader for location and service network to populate
create(String, String, TransportLayerNetwork<?, ?>) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(String, String, TransportLayerNetwork<?, ?>, Zoning) - Static method in class org.goplanit.io.converter.zoning.PlanitZoningReaderFactory: Factory method
create(String, String, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(String, String, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(String, String, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(String, String, PlanitOsmNetwork, Zoning) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader while providing an OSM network, and zoning to populate
create(String, String, RoutedServices) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader for location and routed services to populate
create(String, String, XMLElementMacroscopicNetwork) - Static method in class org.goplanit.io.converter.network.PlanitNetworkWriterFactory: Create a PLANitNetworkWriter which can persist a PLANit network in the native PLANit XML format.
create(String, String, XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory: Create a PLANitNetworkWriter which can persist a PLANit network in the native PLANit XML format.
create(String, String, Zoning, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(String, String, CoordinateReferenceSystem) - Static method in class org.goplanit.io.converter.zoning.PlanitZoningWriterFactory: Create a PLANitZonginWriter which can persist a PLANit zoning in the native PLANit XML format
create(String, String, CoordinateReferenceSystem, XMLElementMacroscopicZoning) - Static method in class org.goplanit.io.converter.zoning.PlanitZoningWriterFactory: Create a PLANitZoningWriter which can persist a PLANit zoning in the native PLANit XML format.
create(String, MacroscopicNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a PLANitServiceNetworkReader sourced from given input directory
create(String, ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader sourced from given input directory
create(String, XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory: Create a PLANitIntermodalWriter which can persist a PLANit network and zoning in the native PLANit XML format.
create(URL) - Static method in class org.goplanit.utils.misc.FileUtils: Create from URL given it is a local file
create(URL, String) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network and zoning
create(URL, String) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader which will create its own macroscopic network by drawing from a cloud based map source
create(URL, String, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(URL, String, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(URL, String, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(URL, String, PlanitOsmNetwork, Zoning) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader while providing an OSM network, and zoning to populate
create(URL, String, Zoning, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(Collection<Mode>) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method allowing access for given modes without any further specification on their speeds
create(IntermodalReader, IntermodalWriter) - Static method in class org.goplanit.converter.intermodal.IntermodalConverterFactory: Create the intermodal converter
create(NetworkReader, NetworkWriter) - Static method in class org.goplanit.converter.network.NetworkConverterFactory: Create the network converter
create(GtfsFileType) - Static method in class org.goplanit.gtfs.scheme.GtfsFileSchemeFactory: Create the Gtfs file scheme based on the desired file type
create(GtfsObjectType) - Static method in class org.goplanit.gtfs.model.GtfsObjectFactory: Create a GTFS object of a given type based on the provide object type
create(PlanitIntermodalReaderSettings) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderFactory: Factory method absed on passed in network and zoning reader settings
create(PlanitNetworkReaderSettings) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(PlanitNetworkReaderSettings, TransportLayerNetwork<?, ?>) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(PlanitRoutedServicesReaderSettings) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader based on given settings which in turn contain information on location and parent network to use
create(PlanitRoutedServicesReaderSettings, RoutedServices) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader for given (empty) routed services and given settings
create(PlanitServiceNetworkReaderSettings) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a PLANitServiceNetworkReader based on given settings which in turn contain information on location and parent network to use
create(PlanitServiceNetworkReaderSettings, ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a Service Network Reader for given (empty) service network and given settings
create(PlanitZoningReaderSettings, TransportLayerNetwork<?, ?>, Zoning) - Static method in class org.goplanit.io.converter.zoning.PlanitZoningReaderFactory: Factory method
create(MatsimNetworkWriterSettings) - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterFactory: Create a PLANitMatsimWriter which persists PLANit networks in MATSIM network format
create(MatsimNetworkWriterSettings, MatsimZoningWriterSettings) - Static method in class org.goplanit.matsim.converter.MatsimIntermodalWriterFactory: create a PLANitMatsimWriter which persists PLANit networks and pt infrastructure in MATSIM network format using the network and zoning settings provided
create(MatsimNetworkWriterSettings, MacroscopicNetwork) - Static method in class org.goplanit.matsim.converter.MatsimZoningWriterFactory: Create a PLANitMatsimZoningWriter (pt output) with defaults.
create(MatsimZoningWriterSettings, MatsimNetworkWriterSettings) - Static method in class org.goplanit.matsim.converter.MatsimZoningWriterFactory: Create a PLANitMAtsimWriter
create(MacroscopicNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a PLANitServiceNetworkReader
create(ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader
create(OsmNetworkReaderSettings) - Static method in class org.goplanit.osm.converter.network.OsmNetworkReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(OsmNetworkReaderSettings, OsmPublicTransportReaderSettings) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which requires the user to set the remaining required settings on the provided settings instances
create(OsmNetworkReaderSettings, OsmPublicTransportReaderSettings, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network and zoning
create(OsmNetworkReaderSettings, OsmPublicTransportReaderSettings, PlanitOsmNetwork, Zoning) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader while providing an OSM network, and zoning to populate
create(OsmNetworkReaderSettings, PlanitOsmNetwork) - Static method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory: Create a PLANitOsmIntermodalReader which will create its own macroscopic network and zoning
create(OsmPublicTransportReaderSettings) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(OsmPublicTransportReaderSettings, Zoning) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a PLANitOSMReader while providing an OSM network to populate
create(DirectedEdge, boolean) - Method in class org.goplanit.graph.directed.EdgeSegmentFactoryImpl: Create edge segment
create(DirectedEdge, boolean) - Method in interface org.goplanit.utils.graph.directed.EdgeSegmentFactory: Create edge segment
create(EdgeSegment[], EdgeSegment[]) - Static method in class org.goplanit.assignment.ltm.sltm.Pas: Create a new PAS (factory method)
create(IdGroupingToken) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(IdGroupingToken, MacroscopicNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a PLANitServiceNetworkReader based on custom id token
create(IdGroupingToken, ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader based on custom id token
create(Mode...) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Factory method allowing access for given modes without any further specification on their speeds
create(Link, boolean) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentFactoryImpl: Create macroscopic link segment, do not register nor register on nodes and link
create(Link, boolean) - Method in class org.goplanit.network.layer.physical.LinkSegmentFactoryImpl: Create link segment
create(Link, boolean) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentFactory: Create macroscopic link segment, do not register nor register on nodes and link
create(Link, boolean) - Method in interface org.goplanit.utils.network.layer.physical.LinkSegmentFactory: Create link segment
create(Zone) - Method in interface org.goplanit.utils.zoning.CentroidFactory: Create a new centroid
create(Zone) - Method in class org.goplanit.zoning.CentroidFactoryImpl: Create a new centroid
create(XMLElementMacroscopicNetwork, TransportLayerNetwork<?, ?>) - Static method in class org.goplanit.io.converter.network.PlanitNetworkReaderFactory: Create a PLANitNetworkReader which will create its own macroscopic network and non-locale specific defaults for any right hand driving country
create(XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning, MacroscopicNetwork, Zoning) - Static method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderFactory: constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
create(XMLElementMacroscopicZoning, TransportLayerNetwork<?, ?>, Zoning) - Static method in class org.goplanit.io.converter.zoning.PlanitZoningReaderFactory: Factory method where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
create(XMLElementRoutedServices, RoutedServices) - Static method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory: Create a PlanitRoutedServicesReader for given XML root element and routed services to populate
create(XMLElementServiceNetwork, ServiceNetwork) - Static method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory: Create a Service Network Reader for given XML root element and service network to populate
create(Zoning) - Static method in class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory: Create a default PLANitOsmZoningReader.
create2DPolygon(List<Double>) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a polygon based on the passed in 2d list of doubles
create2DPolygon(Envelope) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a polygon based on the bounding box
createAllInOneConfiguration(Modes) - Static method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: create a configuration that maps all passed in modes to a single proposed all-in-one layer
createAndPopulateNode(OsmNode, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Extract a PLANit node from the osmNode information
createAndPopulateNode(Point, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Extract a PLANit node from the osmNode information
createAndPopulateTransferZoneGroup(OsmRelation, Map<String, String>) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Create a transfer zone group based on the passed in OSM entity, tags for feature extraction and access
createAndRegisterConectoidEdgeSegments(VirtualNetwork, Collection<ConnectoidEdge>) - Method in class org.goplanit.network.transport.TransportModelNetwork: create and register the edge segments for the passed in connectoid edges
createAndRegisterDemands(Zoning, TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.CustomPlanItProject: Create and register demands to the project
createAndRegisterDemands(Zoning, TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.PlanItProjectInput: Create and register demands to the project inputs
createAndRegisterDirectedConnectoidsOnTopOfTransferZone(TransferZone, MacroscopicNetworkLayer, Mode, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: Create directed connectoids for transfer zones that reside on osw ways.
createAndRegisterFundamentalDiagram(String) - Method in class org.goplanit.assignment.ltm.LtmConfigurator: choose a particular fundamental diagram implementation
createAndRegisterGapFunction(String) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Create and Register gapFunction component
createAndRegisterInfrastructureNetwork(String) - Method in class org.goplanit.project.CustomPlanItProject: Create and register an infrastructure based network on the project
createAndRegisterInfrastructureNetwork(String) - Method in class org.goplanit.project.PlanItProjectInput: Create and register an infrastructure based network on the project input
createAndRegisterInitialLinkSegmentCost(TransportLayerNetwork<?, ?>, String) - Method in class org.goplanit.project.CustomPlanItProject: Create and register initial link segment costs from a (single) file which we assume are available in the native xml/csv output format as provided in this project
createAndRegisterInitialLinkSegmentCost(TransportLayerNetwork<?, ?>, String) - Method in class org.goplanit.project.PlanItProjectInput: Create and register initial link segment costs from a (single) file which we assume are available in the native XML/CSV output format as provided in this project.
createAndRegisterInitialLinkSegmentCost(TransportLayerNetwork<?, ?>, String, TimePeriod) - Method in class org.goplanit.project.CustomPlanItProject: Create and register initial link segment costs from a (single) file and register it to the provided time period
createAndRegisterInitialLinkSegmentCost(TransportLayerNetwork<?, ?>, String, TimePeriod) - Method in class org.goplanit.project.PlanItProjectInput: Create and register initial link segment costs from a (single) file for all time periods (which are assumed are sorted by start time)
createAndRegisterLogitModel(String) - Method in class org.goplanit.path.choice.StochasticPathChoiceConfigurator: create and register the logit model of choice
createAndRegisterNew(String) - Method in class org.goplanit.demands.Demands.TravelerTypes: Factory method to create and register a new travel type on the demands
createAndRegisterNewTimePeriod(String, long, long) - Method in class org.goplanit.demands.Demands.TimePeriods: Factory method to create and register a new time period on the demands
createAndRegisterNewUserClass(String, Mode, TravelerType) - Method in class org.goplanit.demands.Demands.UserClasses: Factory method to create and register a new user class on the demands
createAndRegisterNodeModel(String) - Method in class org.goplanit.assignment.ltm.LtmConfigurator: choose a particular node model implementation
createAndRegisterOdPathMatrix(Zoning) - Method in class org.goplanit.path.OdPathSets: Create an empty od path matrix and register it on this od path sets
createAndRegisterOdPathSets(TransportLayer, Zoning, String) - Method in class org.goplanit.project.CustomPlanItProject: Create and register the OD path sets as populated by the input builder through the path source
createAndRegisterOdPathSets(TransportLayer, Zoning, String) - Method in class org.goplanit.project.PlanItProjectInput: Create and register the OD path sets on the project input
createAndRegisterOutputFormatter(String) - Method in class org.goplanit.project.CustomPlanItProject: Create and register an output formatter instance of a given type
createAndRegisterOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.configuration.OutputConfiguration: Factory method to create an output configuration for a given type
createAndRegisterOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.OutputManager: Factory method to create an output configuration for a given type
createAndRegisterPathChoice(String) - Method in class org.goplanit.assignment.ltm.LtmConfigurator: choose a particular path choice implementation
createAndRegisterPhysicalCost(String) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Create and register physical link cost function to determine travel time
createAndRegisterRoutedServices(ServiceNetwork) - Method in class org.goplanit.project.CustomPlanItProject: Create and register routed services to the project
createAndRegisterRoutedServices(ServiceNetwork) - Method in class org.goplanit.project.PlanItProjectInput: Create and register routed services to the project inputs
createAndRegisterServiceNetwork(MacroscopicNetwork) - Method in class org.goplanit.project.CustomPlanItProject: Create and register service networks to the project
createAndRegisterServiceNetwork(MacroscopicNetwork) - Method in class org.goplanit.project.PlanItProjectInput: Create and register service networks to the project inputs
createAndRegisterSmoothing(String) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Create and Register smoothing component
createAndRegisterTrafficAssignment(String) - Method in class org.goplanit.io.project.PlanItSimpleProject: On a simple project we only allow a single assignment to be registered.
createAndRegisterTrafficAssignment(String, Demands, Zoning, TransportLayerNetwork<?, ?>) - Method in class org.goplanit.io.project.PlanItProject: Create and register a traffic assignment instance of a given type
createAndRegisterTrafficAssignment(String, Demands, Zoning, TransportLayerNetwork<?, ?>) - Method in class org.goplanit.io.project.PlanItSimpleProject: Disallow the use of the generic create and register traffic assignment because a simple project automatically determines its demands, zoning, and network
createAndRegisterTrafficAssignment(String, Demands, Zoning, TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.CustomPlanItProject: Create and register a traffic assignment instance of a given type
createAndRegisterTransferZoneWithConnectoidsAtOsmNode(OsmNode, Map<String, String>, String, TransferZoneType, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Method that will attempt to create both a transfer zone and its connectoids at the location of the OSM node.
createAndRegisterTransferZoneWithoutConnectoidsFindAccessModes(OsmEntity, Map<String, String>, TransferZoneType, String, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Attempt to create a new transfer zone and register it, do not yet create connectoids for it.
createAndRegisterTransferZoneWithoutConnectoidsSetAccessModes(OsmEntity, Map<String, String>, TransferZoneType, Collection<String>, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Attempt to create a new transfer zone and register it, do not create connectoids for it.
createAndRegisterVirtualCost(String) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Create and Register virtual link cost function to determine travel time
createAndRegisterZoning(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.CustomPlanItProject: Create and register the zoning system on the network
createAndRegisterZoning(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.PlanItProjectInput: Create and register the zoning system on the network and project input
createBoundingBox(double, double, double) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: create a square bounding box envelope instance based on the passed in reference point and length in meters of each of the legs, with the point residing in the middle
createBoundingBox(double, double, double, double, double) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: create a square bounding box envelope instance based on the passed in bounding box coordinates and buffer length in meters resulting in a larger bounding box returned
createBoundingBox(OsmNode, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: create a (Rectangular) bounding box around the osm node geometry based on the provided offset
createBoundingBox(Envelope, double) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: create a square bounding box envelope instance based on an existing envelope bounding box and and buffer length in meters resulting in a larger bounding box returned
createBoundingBoxForOsmWay(OsmEntity, double, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: create a bounding box based on the provided offset and OSM entity geometry.
createBridleway(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create bridleway type with defaults For horse riders.
createBuilder(String, IdGroupingToken, InputBuilderListener) - Static method in class org.goplanit.path.choice.PathChoiceBuilderFactory: Create a builder for given path choice type
createBuilder(String, IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Static method in class org.goplanit.assignment.TrafficAssignmentBuilderFactory: Create a builder for given assignment type
createCombinedHashCode(T...) - Static method in class org.goplanit.utils.misc.HashUtils: When you want to avoid using nested hash maps and do not need access to the keys themselves, use a combined hash key via this method, so all can be stored in a single hash map which saves a lot of memory space.
createCompositeOsmKey(String, String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Construct composite key "currentKey:subTag1:subTag2:etc."
createConfigurator() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtmTrafficAssignmentBuilder: create the configurator for ELTM
createConfigurator() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmTrafficAssignmentBuilder: create the configurator for sLTM
createConfigurator() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentBuilder: the user will configure this builder via this configurator
createConfigurator() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: Allow derived classes to provide their own configurator for this builder, by default we create a base class configurator
createConfigurator() - Method in class org.goplanit.path.choice.StochasticPathChoiceBuilder: Allow derived classes to provide their own configurator for this builder, by default we create a base class configurator
createConfigurator() - Method in class org.goplanit.utils.builder.Builder: Allow derived classes to provide their own configurator for this builder, by default we create a base class configurator
createConfigurator(String) - Static method in class org.goplanit.cost.physical.PhysicalCostConfiguratorFactory: Create a configurator for given physical cost type
createConfigurator(String) - Static method in class org.goplanit.cost.virtual.VirtualCostConfiguratorFactory: Create a configurator for given virtual cost type
createConfigurator(String) - Static method in class org.goplanit.gap.GapFunctionConfiguratorFactory: Create a configurator for given gap function type
createConfigurator(String) - Static method in class org.goplanit.path.choice.logit.LogitChoiceModelConfiguratorFactory: Create a configurator for given logit choice model type
createConfigurator(String) - Static method in class org.goplanit.path.choice.PathChoiceConfiguratorFactory: Create a configurator for given path choicetype
createConfigurator(String) - Static method in class org.goplanit.sdinteraction.smoothing.SmoothingConfiguratorFactory: Create a configurator for given smoothing type
createConfigurator(String) - Static method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramConfiguratorFactory: Create a configurator for given fundamental diagram type
createConfigurator(String) - Static method in class org.goplanit.supply.network.nodemodel.NodeModelConfiguratorFactory: Create a configurator for given node model type
createConnectoidIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a connectoid and generates the appropriate id based on the user configuration
createConvertedUnitsValue(OutputProperty, Optional<?>) - Static method in class org.goplanit.output.adapter.OutputTypeAdapterImpl: Convert the output property value that is assumed to be in the properties default units in the desired units indicated on the property
createConverter(ZoningReader, ZoningWriter) - Static method in class org.goplanit.converter.zoning.ZoningConverterFactory: Create the zoning converter
createCoordinate(OsmNode) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Collect the coordinate from the osm node information
createCoordinate(DirectPosition) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a coordinate by mapping ordinate 0 to x and ordinate 1 to y on the open gis DirecPosition
createCoordinateArray(OsmWay, int, int, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Based on the passed in osmWay collect the coordinates on that way as a coordinate array for the given range.
createCoordinateArray(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Based on the passed in osmWay collect the coordinates on that way as a coordinate array.
createCoordinateArray(OsmWay, Map<Long, OsmNode>, int, int, PlanitExceptionConsumer<Set<Long>>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Based on the passed in osmWay collect the coordinates on that way as a coordinate array.
createCoordinateArrayNoThrow(OsmWay, int, int, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Based on the passed in osmWay collect the coordinates on that way as a coordinate array for the given range.
createCoordinateArrayNoThrow(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Based on the passed in osmWay collect the coordinates on that way as a coordinate array.
createCoordinateReferenceSystem(String) - Static method in class org.goplanit.utils.geo.PlanitCrsUtils: create a coordinate reference system instance based on String representation, e.g.
createCopyWithoutAdjacentDuplicateCoordinates(LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create an identical copy, except that any adjacent duplicate coordinates in the line string are removed
createCopyWithoutCoordinatesAfter(int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Remove all coordinates in the line string after but not including the passed in index.
createCopyWithoutCoordinatesAfter(Point, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Remove all coordinates in the line string after but not including the passed in position.
createCopyWithoutCoordinatesBefore(int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Remove all coordinates in the line string up to but not including the passed in index.
createCopyWithoutCoordinatesBefore(Point, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Remove all coordinates in the line string up to but not including the first occurrence of the passed in position.
createCsvStringFromCoordinates(Coordinate[], Character, Character, DecimalFormat) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Based on the line string construct a csv string
createCycleway(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create cycleway type with defaults For designated cycleways
createDefaultActivatedPlanitModes() - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Create the default activate PLANit modes that the MATSIM write will include when writing the network (if they are available).
createDefaultOsmLinkSegmentType(String, double, double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create an OSM default link segment type
createDefaultPhysicalFeatures() - Static method in class org.goplanit.mode.ModeFeaturesFactory: create default physical mode features (VEHICLE, MOTORISED, ROAD)
createDefaultPredefinedModeMappings() - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Initialise the predefined PLANit modes to MATSIM mode mapping, based on the (predefined) mode names.
createDefaultReader(URL) - Static method in class org.goplanit.gtfs.reader.GtfsReaderFactory: Factory method to create a GTFS reader supporting one or more file readers
createDefaultUsabilityFeatures() - Static method in class org.goplanit.mode.ModeFeaturesFactory: create default usability mode features (PRIVATE)
createDemandsPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular demands are prefixed with the exact same string, i.e.
createDirectPosition(double, double) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Create DirectPosition object from X- and Y-coordinates
createEmptyInstance(Map<U, L>) - Static method in class org.goplanit.utils.wrapper.MapWrapperImpl: Create an empty map of the same implementation using reflection, i.e., if the map is a TreeMap a TreeMap is used, same for hashmap etc.
createEnvelope() - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Create absed on underlying links that have a geometry
createEnvelope() - Method in interface org.goplanit.utils.graph.Edge: collect the bounding box of the geometry of this link
createExtendedLineSegment(LineSegment, double, boolean, boolean) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: extend the given line segment in one or two directions with a given distance in meters.
createFileInputStream(File, GtfsFileConditions) - Static method in class org.goplanit.gtfs.util.GtfsUtils: Create a file based input stream for given file and issue warnings dependent on the presence conditions imposed if it is not present
createFileReader(GtfsFileScheme, URL) - Static method in class org.goplanit.gtfs.reader.GtfsReaderFactory: Factory method to create a GTFS file specific reader
createFootway(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create footway type with defaults For designated footpaths; i.e., mainly/exclusively for pedestrians.
createFromPath(String) - Static method in class org.goplanit.utils.misc.UrlUtils: Construct a URL based on a given local file location
createFromPath(Path) - Static method in class org.goplanit.utils.misc.UrlUtils: Construct a URL based no a given path
createFundamentalDiagramComponentInstance(MacroscopicNetworkLayer) - Method in class org.goplanit.assignment.ltm.LtmTrafficAssignmentBuilder: create a fundamental diagram component instance based on configuration
createFunicular(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create funicular (rail) type with defaults
createGapFunctionInstance(StopCriterion) - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: create a gap function instance based on configuration
createGmlCoordinatesType(Coordinate[], Character, Character, DecimalFormat, Character) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Takes a list of JTS coordinates and converts it to GML coordinates value, i.e., converts all coordinates to a string based on provided comma, decimal, tuple separators in 2D format.
createGmlCoordList(Coordinate[]) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Create a list of coordType instances based on provided JTS coordinates
createGmlCoordType(Coordinate) - Method in class org.goplanit.io.converter.PlanitWriterImpl: Create a GML coord type from the provided coordinate
createGmlCoordType(Coordinate) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Create a coordType instance based on provided JTS coordinate
createGmlDirectPositionType(Coordinate) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Convert coordinate to DirectPositionType
createGmlDirectPositionType(Point) - Method in class org.goplanit.io.converter.PlanitWriterImpl: Create a position type based on point location
createGmlLineStringType(CoordinatesType) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Takes a JTS line string and converts it to GML LineStringType.
createGmlLineStringType(LineString) - Method in class org.goplanit.io.converter.PlanitWriterImpl: Create a GML LineStringType from a JTS LineStringand account for any crs transformation if needed
createGmlLineStringType(LineString, Character, Character, DecimalFormat, Character) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Takes a JTS line string and converts it to GML LineStringType.
createGmlPointType(Coordinate) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Convert coordinate to PointType
createGmlPointType(Point) - Method in class org.goplanit.io.converter.PlanitWriterImpl: Create a GML PointType from a JTS Point and account for any crs transformation if needed
createGmlPolygonType(Coordinate[]) - Static method in class org.goplanit.io.geo.PlanitGmlUtils: Create a GML PolygonType from a JTS Polygon
createGmlPolygonType(Polygon) - Method in class org.goplanit.io.converter.PlanitWriterImpl: create a GML PolygonType from a JTS Polygon and account for any crs transformation if needed
createIdGeneratorForParent(IdGroupingToken) - Static method in class org.goplanit.utils.id.IdGenerator: Create new idGenerators for this group such that we track unique id's within this group
createIdGroupingToken(Object, long) - Static method in class org.goplanit.utils.id.IdGenerator: Factory method to create a new id grouping token based on the class instance simple name and the instance id This allows for a human readable token as well as a unique token
createIdGroupingToken(String) - Static method in class org.goplanit.utils.id.IdGenerator: Factory method to create a new id grouping token
createIdMappingFunction(Class<T>, IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a a class that extends ExternalIdAble and generate the appropriate id based on the user configuration
createInitialSolution(double[]) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Create the initial solution to start the equilibration process with
createInitialSolution(double[]) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: Create initial bushes, where for each origin the bush is initialised with the shortest path only
createInitialSolution(double[]) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: create initial solution based on generating shortest paths
createinitialStateLinkSegmentDoubleArray() - Method in class org.goplanit.assignment.ltm.sltm.LinkSegmentData: create a copy of the initial state doubles array
createInputStream(URL, GtfsFileScheme, GtfsFileConditions) - Static method in class org.goplanit.gtfs.util.GtfsUtils: Based on passed in location and the file scheme create an input stream to the appropriate file, log warnings if not present but conditions require otherwise.
createInstance(String, Object...) - Static method in class org.goplanit.utils.reflection.ReflectionUtils: Create an instance of given class name and provided constructor parameters
createIterationPrefix(int) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular traffic assignment run are prefixed with the exact same iteration string, i.e.
createLayerLogPrefix(TransportLayer) - Static method in interface org.goplanit.utils.network.layer.TransportLayer: create a string that can be used to prefix log statements for this layer to - in a unified way - identify this statement came from a particular layer
createLayersContainer(IdGroupingToken) - Method in class org.goplanit.network.MacroscopicNetwork: Derived type is to provide the actual layer implementations
createLayersContainer(IdGroupingToken) - Method in class org.goplanit.network.ServiceNetwork: Derived type is to provide the actual layer implementations
createLayersContainer(IdGroupingToken) - Method in class org.goplanit.network.TransportLayerNetwork: Derived type is to provide the actual layer implementations
createLightRail(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create light rail (rail) type with defaults
createLineSegment(Coordinate, Coordinate) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a line segment
createLineString(String, char, char) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Based on the CSV string construct a line string
createLineString(String, char, char) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Based on the csv string construct a JTS line string
createLineString(List<Double>) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Create a line string from the doubles passed in (list of doubles containing x1,y1,x2,y2,etc.
createLineString(List<Double>) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create a JTS line string from the doubles passed in (list of doubles containing x1,y1,x2,y2,etc.
createLineString(Coordinate...) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create a line string from the passed in coordinates
createLineStringFromCsvString(String, String, String) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Based on the CSV string construct a line string
createLineStringFromCsvString(String, String, String) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Based on the csv string construct a line string
createLineStringFromPositions(List<Position>) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Create a line string from the passed in positions
createLinkIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a link and generates the appropriate id based on the user configuration
createLinkSegmentIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a link segment and (optional) id mapper and generates the appropriate MATSIM link id based on the user configuration
createLinkSegmentTypeIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a link segment type and generates the appropriate id based on the user configuration
createLivingStreet(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create living street type with defaults Roads which serve as an access to housing, without function of connecting settlements.
createLogger(Class<?>) - Static method in class org.goplanit.logging.Logging: Create logger using configuration.
createLogger(Class<?>, String) - Static method in class org.goplanit.logging.Logging: Create logger This method is unlikely to be used directly since the value of logFileSystemProperty should never be changed from its default.
createLoggingPrefix() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: create the logging prefix for logging statements during equilibration
createLoggingPrefix(int) - Method in class org.goplanit.assignment.TrafficAssignment: create the logging prefix for logging statements during equilibration
createLogitChoiceModelInstance(StochasticPathChoiceConfigurator) - Method in class org.goplanit.path.choice.StochasticPathChoiceBuilder: create a logit model instance based on passed in configurator
createModeIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a mode and generates the appropriate id based on the user configuration
createMonoRail(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create mono rail (rail) type with defaults
createMotorway(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create motorway type with defaults restricted access major divided highway, normally with 2 or more running lanes plus emergency hard shoulder.
createMotorwayLink(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create motorway link type with defaults The link roads (sliproads/ramps) leading to/from a motorway from/to a motorway or lower class highway.
createMultiLayerConfiguration(Collection<PredefinedMode>) - Static method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: create a multi-layer configuration that maps all passed in modes to either a rail, active, or on-street layer.
createNarrowGauge(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create narrow gauge(rail) type with defaults
createNetworkLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Factory method to create the desired network loading
createNetworkLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: Create bush based network loading implementation
createNetworkLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: create a path based network loading for this solution scheme
createNetworkPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular network are prefixed with the exact same string, i.e.
createNetworkToZoningReaderData() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Factory method to create bridging data required for an OSM zoning reader to successfully parse the Pt zones based on the osm network parsed by this network reader.
createNew() - Method in class org.goplanit.graph.directed.DirectedVertexFactoryImpl: Create a new directed vertex (without registering on this class)
createNew() - Method in class org.goplanit.graph.VertexFactoryImpl: Create a new vertex (without registering on this class)
createNew() - Method in class org.goplanit.network.layer.physical.NodeFactoryImpl: Create a new node (without registering)
createNew() - Method in class org.goplanit.path.DirectedPathFactoryImpl: Create new path
createNew() - Method in class org.goplanit.service.routed.RoutedServiceFactory: Create a newly created instance without registering on the container
createNew() - Method in class org.goplanit.service.routed.RoutedTripFactory: Create a newly created instance without registering on the container
createNew() - Method in class org.goplanit.service.routed.RoutedTripFrequencyFactory: Create a newly created instance without registering on the container
createNew() - Method in class org.goplanit.service.routed.RoutedTripScheduleFactory: Create a newly created instance without registering on the container
createNew() - Method in interface org.goplanit.utils.graph.directed.DirectedVertexFactory: Create a new directed vertex (without registering on this class)
createNew() - Method in interface org.goplanit.utils.graph.VertexFactory: Create a new vertex (without registering on this class)
createNew() - Method in interface org.goplanit.utils.network.layer.physical.NodeFactory: Create a new node (without registering)
createNew() - Method in interface org.goplanit.utils.path.DirectedPathFactory: Create new path
createNew() - Method in interface org.goplanit.utils.zoning.OdZoneFactory: Create a new OD zone without registering
createNew() - Method in interface org.goplanit.utils.zoning.TransferZoneFactory: Create a new transfer zone without registering
createNew() - Method in interface org.goplanit.utils.zoning.TransferZoneGroupFactory: create a new transferZoneGroup without registering it yet
createNew() - Method in class org.goplanit.zoning.OdZoneFactoryImpl: Create a new OD zone without registering
createNew() - Method in class org.goplanit.zoning.TransferZoneFactoryImpl: Create a new transfer zone without registering
createNew() - Method in class org.goplanit.zoning.TransferZoneGroupFactoryImpl: create a new transferZoneGroup without registering it yet
createNew(LocalTime) - Method in class org.goplanit.service.routed.RoutedTripDepartureFactory: Create a newly created instance without registering on the container
createNew(Deque<? extends EdgeSegment>) - Method in class org.goplanit.path.DirectedPathFactoryImpl: Create new path
createNew(Deque<? extends EdgeSegment>) - Method in interface org.goplanit.utils.path.DirectedPathFactory: Create new path
createNew(Node) - Method in class org.goplanit.network.layer.service.ServiceNodeFactoryImpl: Create a new service node
createNew(Node) - Method in interface org.goplanit.utils.network.layer.service.ServiceNodeFactory: Create a new service node
createNew(ServiceNetworkLayer) - Method in class org.goplanit.service.routed.RoutedServicesLayerFactory: Create a newly created instance without registering on the container
createNewPas(Bush, EdgeSegment[], EdgeSegment[]) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: create a new PAS for the given cheap and expensive paired alternative segments (subpaths) and register the origin bush on it that was responsible for creating it
createOdPathSetsPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular od path sets are prefixed with the exact same string, i.e.
createOnLinkSegmentType(MacroscopicLinkSegmentType, double, Collection<Mode>) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Add mode properties for the passed in modes to the passed in link segment type where we cap the max and critical speed based on the minimum of the mode's maximum speed and the maximum speed
createOnLinkSegmentType(MacroscopicLinkSegmentType, Mode, double) - Static method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesFactory: Add access properties for the passed in modes to the passed in link segment type where we cap the max and critical speed based on the minimum of the mode's maximum speed and the maximum speed
createOsm4jReader(File) - Static method in class org.goplanit.osm.util.Osm4JUtils: Depending on the format create either an OSM or PBF reader based on local file specified by path
createOsm4jReader(URL) - Static method in class org.goplanit.osm.util.Osm4JUtils: Depending on the format create either an OSM or PBF reader
createOsmCompatibleLinkSegmentTypes(OsmNetworkReaderSettings) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create the link segment types that are marked in the passed in settings.
createOsmCompatibleRailLinkSegmentTypeByLayer(String, OsmNetworkReaderSettings) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: create the rail based link segment type based on the setting
createOsmCompatibleRoadLinkSegmentTypeByLayer(String, OsmNetworkReaderSettings) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: create the road based link segment type based on the setting
createOsmEntityComparator() - Static method in class org.goplanit.osm.util.Osm4JUtils: Create a comparator for osm entities absed on their id.
createOsmLinkSegmentType(String, double, double, double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create OSM default link segment types with mode properties where we create multiple types if modes reside on different layers in which case only the modes on that layer will be added to the layer specific type
createOsmRailWayLinkSegmentType(String, double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create a link segment type on the network based on the passed in OSM railway value tags
createOsmRoadWayLinkSegmentType(String, double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create a link segment type on the network based on the passed in OSM highway value tags.
createOutputFormatter(String) - Static method in class org.goplanit.output.formatter.OutputFormatterFactory: Create an output formatter based on the passed in class name
createOutputFormatterPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular output formatters are prefixed with the exact same string, i.e.
createOutputTypeAdapter(OutputType) - Method in class org.goplanit.assignment.algorithmb.AlgorithmB
createOutputTypeAdapter(OutputType) - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm
createOutputTypeAdapter(OutputType) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Create the output type adapter for the current output type, specifically tailored towards the assignment type that we are builing
createOutputTypeAdapter(OutputType) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Create the output type adapter for the current output type, specifically tailored towards the assignment type that we are builing
createOutputTypeAdapter(OutputType) - Method in class org.goplanit.assignment.TrafficAssignment: Create the output type adapter for the current output type, specifically tailored towards the assignment type that we are builing
createPath(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create path type with defaults A non-specific path either multi-use or unspecified usage, open to all non-motorized vehicles and not intended for motorized vehicles unless tagged so separately
createPath(DirectedPathFactory, Vertex, Vertex) - Method in class org.goplanit.algorithms.shortestpath.MinMaxPathResultImpl: Create the path from the provided origin to a specified destination vertex, using the results available.
createPath(DirectedPathFactory, Vertex, Vertex) - Method in interface org.goplanit.algorithms.shortestpath.ShortestPathResult: Create the path from the provided origin to a specified destination vertex, using the results available.
createPath(DirectedPathFactory, Vertex, Vertex) - Method in class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: Create the path from the provided origin to a specified destination vertex, using the results available.
createPathChoiceInstance() - Method in class org.goplanit.path.choice.PathChoiceBuilder: Factory method to create the instance of the desired type
createPathChoiceInstance(LtmConfigurator<? extends LtmAssignment>) - Method in class org.goplanit.assignment.ltm.LtmTrafficAssignmentBuilder: create a path choice instance based on configuration
createPedestrian(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create pedestrian type with defaults For roads used mainly/exclusively for pedestrians in shopping and some residential areas which may allow access by motorised vehicles only for very limited periods of the day.
createPhysicalCostInstance() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: create a physical cost instance based on configuration
createPhysicalFeatures(VehicularModeType, MotorisationModeType, TrackModeType) - Static method in class org.goplanit.mode.ModeFeaturesFactory: create physical mode features
createPlanitCrs(String) - Static method in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Create a crs based on passed in srs name.
createPlanitModeToMatsimModeMapping(MacroscopicNetworkLayerImpl) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Creating a mapping from actual PLANit modes in the network to the MATSIM mode mapping as per the configuration in this class instance
createPlanitSchemaUri(String) - Static method in class org.goplanit.io.xml.util.PlanitSchema: create the appropriate URI reference for the xsd schema assuming it is published according to PLANit guidelines meaning that when this is a development version it resides under XSD_SCHEMA_URI_DEVELOPMENT_GENERIC whereas if this is a release version the RESOURCES_RELEASE_GENERIC is supplemented with the correct release version and appended with the xsd schema location
createPoint(long, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Create a point based on the OSMnode
createPoint(OsmNode) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Create a point from the node
createPoint(Number, Number) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create JTS point object from X- and Y-coordinates
createPoint(Coordinate) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create JTS point object from coordinate
createPolygon() - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create an empty polygon geometry
createPolygon(Coordinate[]) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a polygon based on the passed coordinate array
createPopulateAndRegisterNode(OsmNode, MacroscopicNetworkLayer, OsmNetworkReaderLayerData) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Extract a PLANit node from the osmNode information and register it on the provided layer
createPopulateAndRegisterNode(Point, MacroscopicNetworkLayer, OsmNetworkReaderLayerData) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Extract a PLANit node from the location information and register it on the provided layer
createPopulateAndRegisterTransferZoneGroup(OsmRelation, Map<String, String>) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Create a transfer zone group based on the passed in OSM entity, tags for feature extraction and access and register it
createPredefinedMode(IdGroupingToken, PredefinedModeType) - Method in class org.goplanit.mode.ModeFactoryImpl: create a predefined mode instance without registering it on the container.
createPredefinedMode(IdGroupingToken, PredefinedModeType) - Method in interface org.goplanit.utils.mode.ModeFactory: create a predefined mode instance without registering it on the container.
createPrimary(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create primary type with defaults The next most important roads in a country's system (after trunk).
createPrimaryLink(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create primary link type with defaults The link roads (sliproads/ramps) leading to/from a primary road from/to a primary road or lower class highway.
createProjectPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular project are prefixed with the exact same string, i.e.
createRail(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create rail type with defaults
createReleaseFlowEvent(TriggerFlowEvent, CumulativePoint, double) - Static method in class org.goplanit.assignment.ltm.eltm.event.ReleaseFlowEvent: Create a new release flow event being release on the opposite boundary of the source trigger
createResidential(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create residential type with defaults Roads which serve as an access to housing, without function of connecting settlements.
createRoad(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create road type with defaults A road/way/street/motorway/etc.
createRoutedServicesPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular routed services are prefixed with the exact same string, i.e.
createRunIdPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular traffic assignment run are prefixed with the exact same string, i.e.
createSecondary(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create secondary type with defaults The link roads (sliproads/ramps) leading to/from a primary road from/to a primary road or lower class highway.
createSecondaryLink(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create secondary link type with defaults The link roads (sliproads/ramps) leading to/from a secondary road from/to a secondary road or lower class highway.
createService(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create service type with defaults For access roads to, or within an industrial estate, camp site, business park, car park, alleys, etc.
createServiceNetworkPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular service network are prefixed with the exact same string, i.e.
createSmoothingInstance() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: create a smoothing instance based on configuration
createSpatiallyIndexedPlanitEdges(Collection<? extends GraphEntities<T>>) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Created quadtree based on edge envelopes as spatial index.
createSteps(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create step type with defaults For flights of steps (stairs) on footways
createSubpathArrayFrom(DirectedVertex, DirectedVertex, Map<DirectedVertex, EdgeSegment>, int, boolean) - Static method in class org.goplanit.assignment.ltm.sltm.PasManager: Extract a subpath in the form of a raw edge segment array from start to end vertex based on a map representing a tree with succeeding edge segments for each vertex
createSubpathArrayFrom(DirectedVertex, DirectedVertex, ShortestPathResult, int, boolean) - Static method in class org.goplanit.assignment.ltm.sltm.PasManager: Extract a subpath in the form of a raw edge segment array from start to end vertex based on the shortest path result provided.
createSubway(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create subway type with defaults
createTertiary(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create tertiary type with defaults The next most important roads in a country's system (after secondary).
createTertiaryLink(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create tertiary link type with defaults The link roads (sliproads/ramps) leading to/from a tertiary road from/to a tertiary road or lower class highway.
createTimePeriodPrefix(TimePeriod) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular time period are prefixed with the exact same string, i.e.
createTrack(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create track type with defaults Roads for mostly agricultural or forestry uses.
createTrafficAssignmentInstance() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: Factory method to create the instance of the desired type
createTram(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create tram type with defaults
createTransferZoneGroupIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a transfer zone group and generates the appropriate id based on the user configuration
createTransportNetwork() - Method in class org.goplanit.assignment.TrafficAssignment: Initialize the transport network by combining the physical and virtual components
createTriggerFlowEvent(LinkSegmentBoundary, CumulativePoint, double) - Static method in class org.goplanit.assignment.ltm.eltm.event.TriggerFlowEvent: Create a new trigger flow event emanating from the passing in link boundary at a given cumulative point and flow rate
createTrunk(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create trunk type with defaults The most important roads in a country's system that aren't motorways.
createTrunkLink(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create trunk link type with defaults restricted access major divided highway, normally with 2 or more running lanes plus emergency hard shoulder.
createTurnHashCode(int, int) - Static method in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: create hash code used for turn flow map
createTypedInstance(String, Object...) - Static method in class org.goplanit.utils.reflection.ReflectionUtils: delegates to ReflectionUtils.createInstance(String, Object...) only casts result to type provided
createUnclassified(double, Collection<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Create unclassified type with defaults The least important through roads in a country's system – i.e.
createUniqueCopyOf(ManagedId) - Method in interface org.goplanit.utils.id.ManagedIdEntityFactory: Create a shallow copy of the passed in entity, albeit with unique internal ids.
createUniqueCopyOf(ManagedId) - Method in class org.goplanit.utils.id.ManagedIdEntityFactoryImpl: Create a shallow copy of the passed in entity, albeit with unique internal ids.
createUniqueCopyOf(ManagedId) - Method in class org.goplanit.zoning.CentroidFactoryImpl: Create a shallow copy of the passed in entity, albeit with unique internal ids.
createUsabilityFeatures(UseOfModeType) - Static method in class org.goplanit.mode.ModeFeaturesFactory: create usability mode features
createVertexIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a node and generates the appropriate id based on the user configuration
createVirtualCostInstance() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: create a virtual cost instance based on configuration
createXMLWriter(Path) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: create an xml stream writer for the given path
createZipEntryInputStream(URL, String) - Static method in class org.goplanit.utils.zip.ZipUtils: Collect the input stream for a given zip file entry.
createZipEntryInputStream(URL, String, GtfsFileConditions) - Static method in class org.goplanit.gtfs.util.GtfsUtils: Create a zip based input stream for given zip internal file location and issue warnings dependent on the presence conditions imposed if it is not present
createZipEntryInputStream(ZipFile, String) - Static method in class org.goplanit.utils.zip.ZipUtils: Collect the input stream for a given zip file entry.
createZipFile(URL) - Static method in class org.goplanit.utils.zip.ZipUtils: Create a zip file from a URL
createZipInputStream(URL) - Static method in class org.goplanit.utils.zip.ZipUtils: Collect the zip input stream for a given zip file (starting point).
createZoneIdMappingFunction(IdMapperType) - Static method in class org.goplanit.converter.IdMapperFunctionFactory: create a function that takes a zone and generates the appropriate id based on the user configuration
createZoningPrefix(long) - Static method in class org.goplanit.utils.misc.LoggingUtils: Create a prefix for the logger so that all logging items specific to a particular zoning are prefixed with the exact same string, i.e.
CRITICAL_SPEED - org.goplanit.tntp.enums.NetworkFileColumnType
criticalSpeedKmH - Variable in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Maximum speed of mode (tied to a road segment type) in km/h
CROSSING - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for footway to indicate crossing of a road, footway=crossing
CROSSING - Static variable in class org.goplanit.osm.tags.OsmTags
crs - Variable in class org.goplanit.utils.geo.PlanitJtsCrsUtils: the crs to use
csvFileNameMap - Variable in class org.goplanit.output.formatter.CsvFileOutputFormatter: Map of list of CSV output file names for each OutputType
CsvFileOutputFormatter - Class in org.goplanit.output.formatter: Class containing common methods required by classes which write results to CSV output files
CsvFileOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.output.formatter.CsvFileOutputFormatter: Constructor
CSVOutputFormatter - Class in org.goplanit.tntp.output.formatter: Output formatter for CSV output, i.e.
CSVOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Base constructor
CsvTextFileOutputFormatter - Interface in org.goplanit.output.formatter: This interfaces defines behaviours which output formatters which generate a CSV output file must have.
CumulativeEvent - Class in org.goplanit.assignment.ltm.eltm.event: A cumulative event represents a cumulative pcu point in space-time with (potential) additional information.
CumulativeEvent(EventType, Serializable, CumulativePoint, Serializable...) - Constructor for class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent: Constructor of an LTM cumulative event.
CumulativeEvent(EventType, Object, CumulativePoint, Serializable) - Constructor for class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent: Constructor of an LTM cumulative event.
CumulativePoint - Interface in org.goplanit.utils.cumulatives: Represents a cumulative point in time
CumulativePointImpl - Class in org.goplanit.utils.cumulatives: Represents a cumulative point in time
CumulativePointImpl(double, double) - Constructor for class org.goplanit.utils.cumulatives.CumulativePointImpl: Constructor
CURRENCY_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
currentLocation - Variable in class org.goplanit.utils.od.OdHashedIterator: Marker used to store the current position in the OD matrix (used internally, not accessible from other classes)
currentLocation - Variable in class org.goplanit.utils.od.OdMatrixIterator: Marker used to store the current position in the OD matrix (used internally, not accessible from other classes)
currentOrigin - Variable in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: Reference to current origin for which we have collected shortest paths on a ONE-TO-ALL basis
CUSTOM - org.goplanit.utils.mode.PredefinedModeType
CUSTOMERS - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: customers tag
CustomPlanItProject - Class in org.goplanit.project: The top-level class which hosts a single project.
CustomPlanItProject(InputBuilderListener) - Constructor for class org.goplanit.project.CustomPlanItProject: Constructor which reads in the input builder listener and instantiates the object factory classes.
CYCLEWAY - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: highway type cycle way, which can also be used as key cycleway=
CYCLEWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
CYCLEWAY_BOTH - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
CYCLEWAY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
CYCLEWAY_LEFT - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
CYCLEWAY_LEFT_ONEWAY - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
CYCLEWAY_OPPOSITE_DIRECTION_POSITIVE_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: opposite_lane opposite_track opposite_share_busway
CYCLEWAY_REGULAR_NEGATIVE_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: no seaprate proposed
CYCLEWAY_REGULAR_POSITIVE_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: lane shared_lane shoulder track share_busway
CYCLEWAY_RIGHT - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
CYCLEWAY_RIGHT_ONEWAY - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
CYPRUS - Static variable in class org.goplanit.utils.locale.CountryNames

D

dag - Variable in class org.goplanit.assignment.ltm.sltm.Bush: the directed acyclic subgraph representation of the bush, pertaining solely to the topology
dataConfig - Variable in class org.goplanit.assignment.ltm.sltm.consumer.BushFlowUpdateConsumer: data and configuration used for a flow update by derived classes
dataConfig - Variable in class org.goplanit.assignment.ltm.sltm.consumer.PathFlowUpdateConsumer: data and configuration used for a flow update by derived classes
DataType - Enum in org.goplanit.output.enums: Enumeration of possible output data types
DATE - org.goplanit.gtfs.enums.GtfsKeyType
DAY - org.goplanit.tntp.enums.CapacityPeriod
deactivate(String) - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Choose to not parse the given combination of way subtype, e.g.
deactivateAll() - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: deactivate all types explicitly
deactivateAllModesExcept(Collection<String>, List<String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: remove all road modes from mapping except for the passed in ones
deactivateAllOsmHighWayTypes() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: deactivate all types for highway
deactivateAllOsmHighwayTypesExcept(String...) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: deactivate all types for highway except the ones provides
deactivateAllOsmHighwayTypesExcept(List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: deactivate all types for highway except the ones provides
deactivateAllOsmRailwayTypes() - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: deactivate all types for rail
deactivateAllOsmRailwayTypesExcept(String...) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: deactivate all types for railway except the ones provides
deactivateAllOsmRailwayTypesExcept(List<String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: deactivate all types for railway except the ones provides
deactivateAllOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: deactivate all types for both rail and highway
deactivateAllOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Deactivate all types for the infrastructure type we represent
deactivateAllOsmWayTypesExcept(String...) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: deactivate all osm way types except the ones indicated, meaning that if the ones passed in are not already active, they will be marked as activate afterwards.
deactivateAllOsmWayTypesExcept(List<String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: deactivate all osm way types except the ones indicated, meaning that if the ones passed in are not already active, they will be marked as activate afterwards.
deactivateAllRailModes() - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: remove all rail modes from mapping
deactivateAllRailModesExcept(String...) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: remove all rail modes from mapping except for the passed in ones
deactivateAllRailModesExcept(List<String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: remove all rail modes from mapping except for the passed in ones
deactivateAllRoadModesExcept(String...) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Remove all road modes from mapping except for the passed in ones
deactivateAllRoadModesExcept(List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: remove all road modes from mapping except for the passed in ones
deactivatedOsmTypes - Variable in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: the OSM types that are marked as deactivate OSM types, i.e., will be ignored when parsing unless activated.
deactivatedPredefinedMode(PredefinedModeType) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Remove the provided predefined mode from the activated modes listed for inclusion in the MATSIM network (in mapped form)
deactivateOdSkimOutputType(OdSkimSubOutputType) - Method in class org.goplanit.output.configuration.OdOutputTypeConfiguration: Deactivate an ODSkimOutputType for this output type configuration
deactivateOsmHighwayType(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Choose to not parse the given highway type, e.g.
deactivateOsmModes(Collection<String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Remove all provided modes from mapping
deactivateOsmRailwayType(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Choose to not parse the given railway type, e.g.
deactivateOsmWayType(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Choose to not parse the given way valuetype, e.g.
deactivateOutput(OutputType) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Deactivate an output type
deactivateRailModes(String...) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: deactivate provided rail modes
deactivateRailModes(List<String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: deactivate provided rail modes
deactivateRoadModes(String...) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: deactivate provided road modes
deactivateRoadModes(List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: deactivate provided road modes
deactivateSubOutputType(SubOutputTypeEnum) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Deactivate a SubOutputTypeEnum for this output type configuration
DECIMAL_POINT - Static variable in class org.goplanit.utils.misc.CharacterUtils: a decimal point '.'
decimalFormat - Variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: number of decimals to use, default is Precision.DEFAULT_DECIMAL_FORMAT
decimalFormat - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: number of decimals to use, default is Precision.DEFAULT_DECIMAL_FORMAT
decimalSeparator - Variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: decimal separator, default is CharacterUtils.DECIMAL_POINT
decreaseIndentation() - Method in class org.goplanit.matsim.converter.MatsimWriter: Decrease indentation level
DEFAULT - org.goplanit.utils.args.ArgumentStyle
DEFAULT_ACTIVATE_BUSH_BASED - Static variable in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: default value used
DEFAULT_ACTIVATE_DETAILED_LOGGING - Static variable in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: default value used
DEFAULT_ACTIVATED_MODES - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: track the PLANit modes that we include in the network to write
DEFAULT_ACTIVATED_OSM_HIGHWAY_TYPES - Static variable in class org.goplanit.osm.defaults.OsmHighwayTypeConfiguration: the OSM highway types that are marked as activated OSM types, i.e., will be processed when parsing
DEFAULT_ACTIVATED_OSM_RAILWAY_TYPES - Static variable in class org.goplanit.osm.defaults.OsmRailwayTypeConfiguration: the OSM railway types that are marked as activated OSM types, i.e., will be processed when parsing
DEFAULT_ALPHA - Static variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Default alpha BPR parameter if not other information is available
DEFAULT_ALWAYS_KEEP_LARGEST_SUBNETWORK - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: by default we always keep the largest subnetwork
DEFAULT_AVERAGED - Static variable in class org.goplanit.gap.NormBasedGapFunction: default we average the result
DEFAULT_BACKWARD_WAVE_SPEED_KM_HOUR - Static variable in class org.goplanit.utils.macroscopic.MacroscopicConstants: Default backward wave speed (km/h) (negative value)
DEFAULT_BETA - Static variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Default beta BPR parameter if not other information is available
DEFAULT_CAPACITY_PCU_HOUR_LANE - Static variable in class org.goplanit.utils.macroscopic.MacroscopicConstants: Default capacity per lane (pcu/h/lane)
DEFAULT_CLOSEST_EDGE_SEARCH_BUFFER_DISTANCE_M - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: The default buffer distance when looking for edges within a distance of the closest edge to create connectoids (stop_locations) on for transfer zones.
DEFAULT_CONNECTOID_SPEED_KPH - Static variable in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: default to apply
DEFAULT_CONNECTOID_TYPE - Static variable in interface org.goplanit.utils.zoning.Connectoid: default type is set to none
DEFAULT_CONVERGENCE_EPSILON - Static variable in class org.goplanit.tntp.TntpMain
DEFAULT_COUNTRY - Static variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: default destination country to use if none is set
DEFAULT_DEACTIVATED_OSM_HIGHWAY_TYPES - Static variable in class org.goplanit.osm.defaults.OsmHighwayTypeConfiguration: the OSM highway types that are marked as deactivated OSM types, i.e., will be ignored when parsing
DEFAULT_DEACTIVATED_OSM_RAILWAY_TYPES - Static variable in class org.goplanit.osm.defaults.OsmRailwayTypeConfiguration: the OSM railway types that are marked as deactivated OSM types, i.e., will be ignored when parsing
DEFAULT_DECIMAL_FORMAT - Static variable in class org.goplanit.utils.math.Precision: default decimal format used applies a maximum of 8 decimals and a minimum of 2
DEFAULT_DISABLE_LINK_STORAGE_CONSTRAINTS - Static variable in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: default value used
DEFAULT_EMPTY_DENSITY_PCU_HOUR_LANE - Static variable in class org.goplanit.utils.macroscopic.MacroscopicConstants: Default maximum density per lane (pcu/km/lane)
DEFAULT_EPSILON - Static variable in class org.goplanit.gap.StopCriterion: Default Epsilon in case it is not set by user
DEFAULT_EXTERNAL_ID - Static variable in class org.goplanit.mode.ModeImpl
DEFAULT_FILE_NAME_EXTENSION - Static variable in class org.goplanit.matsim.converter.MatsimWriter: default extension for xml files generated
DEFAULT_FIXED_COST - Static variable in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Default fixed cost
DEFAULT_GENERATE_DETAILED_LINK_GEOMETRY - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Default setting for generating detailed link geometry file is false
DEFAULT_GEOGRAPHIC_CRS - Static variable in class org.goplanit.io.geo.PlanitOpenGisUtils: Default Coordinate Reference System: WGS84
DEFAULT_GEOGRAPHIC_CRS - Static variable in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Default Coordinate Reference System: WGS84
DEFAULT_HIGHWAY_TYPE_WHEN_UNSUPPORTED - Static variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: Default is OSM highway type when the type is not supported is set to PlanitOsmTags.TERTIARY.
DEFAULT_HIGHWAYS_PARSER_ACTIVE - Static variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: by default the highway parser is activated
DEFAULT_INITIAL_STEP_SIZE - Static variable in class org.goplanit.sdinteraction.smoothing.MSASmoothing: The default initial step size to use
DEFAULT_ITERATION_OFFSET - Static variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default value to use
DEFAULT_LANES_PER_DIRECTION_IF_UNSPECIFIED - Static variable in class org.goplanit.osm.defaults.OsmLaneDefaults: in case no mapping between highway type and number of lanes is present, use this.
DEFAULT_LANG - org.goplanit.gtfs.enums.GtfsKeyType
DEFAULT_LENGTH_KM - Static variable in interface org.goplanit.utils.zoning.Connectoid: Default connectoid length in km
DEFAULT_MAX_DENSITY_LANE - Static variable in class org.goplanit.osm.util.OsmConstants: pcu/km/lane
DEFAULT_MAX_DENSITY_PCU_KM_LANE - Static variable in class org.goplanit.utils.macroscopic.MacroscopicConstants: Default maximum density per lane (pcu/km/lane)
DEFAULT_MAX_ITERATION_THRESHOLD - Static variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default value to use
DEFAULT_MAX_ITERATIONS - Static variable in class org.goplanit.gap.StopCriterion: Default maximum number of iterations in case it is not set by user
DEFAULT_MAX_ITERATIONS - Static variable in class org.goplanit.tntp.TntpMain
DEFAULT_MAX_SINGLE_WORSENING_THRESHOLD - Static variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default value to use
DEFAULT_MAX_SPEED - Static variable in interface org.goplanit.utils.network.layer.physical.LinkSegment: Default maximum speed on a link segment in km/h
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.BicycleMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.BusMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.CarHighOccupancyMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.CarMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.CarShareMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.GoodsMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.HeavyGoodsMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.LargeHeavyGoodsMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.LightRailMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.MotorBikeMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.PedestrianMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.SubwayMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.TrainMode
DEFAULT_MAX_SPEED_KMH - Static variable in class org.goplanit.mode.TramMode
DEFAULT_MAXIMUM_SPEED - Static variable in class org.goplanit.tntp.TntpMain
DEFAULT_MIN_AVERAGE_IMPROVEMENT_THRESHOLD - Static variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default value to use
DEFAULT_MIN_ITERATION_THRESHOLD - Static variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default value to use
DEFAULT_MINIMUM_CAPACITY_LANE - Static variable in class org.goplanit.osm.util.OsmConstants: pcu/h/lane
DEFAULT_MINIMUM_SUBNETWORK_SIZE - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Default minimum size of subnetwork for it not to be removed when dangling subnetworks are removed, size indicates number of vertices: 20
DEFAULT_MOTORISATION_TYPE - Static variable in interface org.goplanit.utils.mode.PhysicalModeFeatures: default is motorised
DEFAULT_NAME - Static variable in class org.goplanit.userclass.TravelerType: default name
DEFAULT_NAME - Static variable in class org.goplanit.userclass.UserClass: default name
DEFAULT_NETWORK_FILE_NAME - Static variable in class org.goplanit.io.converter.network.PlanitNetworkWriter: default network file name to use
DEFAULT_NETWORK_FILE_NAME - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: default names used for MATSIM network file that is being generated
DEFAULT_NETWORK_GEOMETRY_FILE_NAME - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriter: default names used for MATSIM network file that is being generated
DEFAULT_NETWORK_GEOMETRY_FILE_NAME_EXTENSION - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriter: default names used for MATSIM network file that is being generated
DEFAULT_NODE_ACCESS_DOWNSTREAM - Static variable in interface org.goplanit.utils.zoning.DirectedConnectoid: default node access is set to the downstream end of a link segment
DEFAULT_NORM - Static variable in class org.goplanit.gap.NormBasedGapFunction: default norm is set to 1
DEFAULT_NUMBER_OF_LANES - Static variable in interface org.goplanit.utils.network.layer.physical.LinkSegment: Default number of lanes
DEFAULT_PARSE_OSMWAY_GEOMETRY - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: default value for parsing OSM way geometry: false
DEFAULT_PCU - Static variable in class org.goplanit.mode.BicycleMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.BusMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.CarHighOccupancyMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.CarMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.CarShareMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.GoodsMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.HeavyGoodsMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.LargeHeavyGoodsMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.LightRailMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.MotorBikeMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.PedestrianMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.SubwayMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.TrainMode
DEFAULT_PCU - Static variable in class org.goplanit.mode.TramMode
DEFAULT_PCU_VEHICLE_MULTIPLIER - Static variable in class org.goplanit.utils.unit.VehiclesUnit: Default multiplier for conversion from pcus to vehicles
DEFAULT_PLANIT2MATSIM_MODE_MAPPING - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: provides the default mapping from planit modes ((predefined) mode name) to MATSIM mode (string)
DEFAULT_PRIVATE_TRANSPORT_MODE - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: default mode for all private transport modes in Matsim is car, so that is what we use for initial mapping
DEFAULT_PUBLIC_TRANSPORT_MODE - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: default mode for all public transport modes in Matsim is pt, so that is what we use for initial mapping
DEFAULT_RAILWAYS_PARSER_ACTIVE - Static variable in class org.goplanit.osm.converter.network.OsmRailwaySettings: by default the railway parser is deactivated
DEFAULT_REMOVE_DANGLING_SUBNETWORK - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Default whether or not we are removing dangling subnetworks after parsing: true
DEFAULT_REMOVE_DANGLING_TRANSFER_ZONE_GROUPS - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: by default we are removing dangling transfer zone groups
DEFAULT_REMOVE_DANGLING_ZONES - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: by default we are removing dangling zones
DEFAULT_SEARCH_RADIUS_PLATFORM2STOP_M - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: default search radius in meters for mapping stops/platforms to stop positions on the networks when they have no explicit reference
DEFAULT_SEARCH_RADIUS_STATION_PARALLEL_TRACKS_M - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Default search radius in meters when trying to find parallel lines (tracks) for stand-alone stations
DEFAULT_SEARCH_RADIUS_STATION2PLATFORM_M - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: default search radius in meters for mapping stations to platforms on the networks when they have no explicit reference
DEFAULT_SEPARATOR - Static variable in class org.goplanit.io.input.PlanItInputBuilder: The default separator that is assumed when no separator is provided
DEFAULT_SOURCE_CRS - Static variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the default crs is set to PlanitJtsUtils.DEFAULT_GEOGRAPHIC_CRS
DEFAULT_SPEED_EPSILON - Static variable in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Epsilon margin when comparing speeds (km/h)
DEFAULT_SPEEDLIMIT_BASED_ON_URBAN_AREA - Static variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: default value whether or not speed limits are based on urban area defaults: true
DEFAULT_TRACK_TYPE - Static variable in interface org.goplanit.utils.mode.PhysicalModeFeatures: default is road based, e.g.
DEFAULT_TRACKS_PER_DIRECTION_IF_UNSPECIFIED - Static variable in class org.goplanit.osm.defaults.OsmLaneDefaults: store the rail default.
DEFAULT_TRANSFER_PARSER_ACTIVE - Static variable in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: by default the transfer parser is deactivated
DEFAULT_TRANSIT_SCHEDULE_FILE_NAME - Static variable in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: default names used for MATSIM public transport schedule file that is being generated
DEFAULT_TYPE - Static variable in interface org.goplanit.utils.zoning.TransferZone: default transfer zone type
DEFAULT_USEOF_TYPE - Static variable in interface org.goplanit.utils.mode.UsabilityModeFeatures: default use of mode is private use
DEFAULT_VEHICULAR_TYPE - Static variable in interface org.goplanit.utils.mode.PhysicalModeFeatures: default is of a vehicular type
DEFAULT_XML_FILE_EXTENSION - Static variable in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Default extension for XML input files
DEFAULT_XML_ID - Static variable in class org.goplanit.userclass.TravelerType: Default XML id
DEFAULT_XML_ID - Static variable in class org.goplanit.userclass.UserClass: Default XML id
DEFAULT_XML_ID - Static variable in interface org.goplanit.utils.mode.Mode: If no mode is defined the default mode is assumed to have an XML id of 1
DEFAULT_XML_ID - Static variable in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: If no macroscopic link segment type is defined the default takes on an XML id of 1
DEFAULT_ZONING_FILE_NAME - Static variable in class org.goplanit.io.converter.zoning.PlanitZoningWriter: default network file name to use
defaultOsmHighwayTypeWhenUnsupported - Variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: When the user has activated a highway type for which the reader has no support, this alternative will be used, default is set to PlanitOSMTags.TERTIARY.
defaultParameters - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Default alpha and beta values for all links
defaultParametersPerLinkSegmentTypeAndMode - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Map to store default alpha and beta values for each link type and mode
defaultParametersPerMode - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Map to store default alpha and beta values for each mode
defaultPlanitOsmLinkSegmentTypes - Variable in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: the PLANit link segment types per layer (value) that are activated for this osm way type (key)
defaultRoadLanesPerDirection - Static variable in class org.goplanit.osm.defaults.OsmLaneDefaults: store the road based defaults
delayedMethodCalls - Variable in class org.goplanit.utils.builder.Configurator: The methods to invoke on the to be configured object instance and their parameters.
deleteDirectory(File) - Static method in class org.goplanit.utils.misc.FileUtils: Delete a directory by providing a file that represents a directory.
DELIVERY - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: delivery tag
DEMAND_XSD_FILE - Static variable in class org.goplanit.io.converter.demands.PlanitDemandsReader: Reference to demand schema location TODO: move to properties file
demands - Variable in class org.goplanit.io.converter.demands.PlanitDemandsReader: the demands to populate
demands - Variable in class org.goplanit.project.CustomPlanItProject: The registered demands
demands - Variable in class org.goplanit.project.PlanItProjectInput: The registered demands
Demands - Class in org.goplanit.demands: Container class for all demands registered on the project.
Demands(Demands) - Constructor for class org.goplanit.demands.Demands: Copy constructor
Demands(IdGroupingToken) - Constructor for class org.goplanit.demands.Demands: Constructor
Demands.TimePeriods - Class in org.goplanit.demands: Inner class to register and store time periods for the current demand object
Demands.TravelerTypes - Class in org.goplanit.demands: Inner class to register and store traveler types for the current demand object
Demands.UserClasses - Class in org.goplanit.demands: Inner class to register and store user classes for the current demand object
DemandsReader - Interface in org.goplanit.converter.demands: Interface to read a PLANit demands
demandsToPopulate - Variable in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: the demands to populate
DemandsWriter - Interface in org.goplanit.converter.demands: Interface to write a PLANit demands to disk
DENSITY - org.goplanit.output.property.OutputPropertyType
DensityOutputProperty - Class in org.goplanit.output.property: Density output property in pcu/km
DensityOutputProperty() - Constructor for class org.goplanit.output.property.DensityOutputProperty
DEPARTURE_TIME - org.goplanit.gtfs.enums.GtfsKeyType
deregisterOutputTypeAdapter(OutputType) - Method in class org.goplanit.output.adapter.OutputAdapter: Deregister an output type adapter for a specified output type
deregisterOutputTypeAdapter(OutputType) - Method in class org.goplanit.output.OutputManager: Deregister the output adapter for a specified output type (if it exists)
deregisterOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.configuration.OutputConfiguration: remove the output type from the list of active types, its configuration is also nullified, this type will no longer be persisted
deregisterOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.OutputManager: Remove the output type configuration for a specified output type
DESCRIPTION_PROPERTY_KEY - Static variable in class org.goplanit.io.xml.util.ApplicationProperties
deSerialize(byte[]) - Static method in class org.goplanit.utils.misc.CloneUtils: Deserialise based on byte array to object
DESIGNATED - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: designated tag
DESTINATION - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: destination tag
DESTINATION_ID - org.goplanit.gtfs.enums.GtfsKeyType
DESTINATION_SIGN - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
DESTINATION_ZONE_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
DESTINATION_ZONE_ID - org.goplanit.output.property.OutputPropertyType
DESTINATION_ZONE_XML_ID - org.goplanit.output.property.OutputPropertyType
destinationCoordinateReferenceSystem - Variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: the coordinate reference system used for writing entities of this network
destinationCoordinateReferenceSystem - Variable in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: the coordinate reference system used for writing entities of this network
destinationCrsTransformer - Variable in class org.goplanit.matsim.converter.MatsimWriter: when the destination CRS differs from the network CRS all geometries require transforming, for which this transformer will be initialised
destinationId - Variable in class org.goplanit.utils.od.OdHashedIterator: Id of the destination zone
destinationId - Variable in class org.goplanit.utils.od.OdMatrixIterator: Id of the destination zone
DestinationZoneExternalIdOutputProperty - Class in org.goplanit.output.property
DestinationZoneExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty
DestinationZoneIdOutputProperty - Class in org.goplanit.output.property
DestinationZoneIdOutputProperty() - Constructor for class org.goplanit.output.property.DestinationZoneIdOutputProperty
DestinationZoneXmlIdOutputProperty - Class in org.goplanit.output.property
DestinationZoneXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty
DijkstraShortestPathAlgorithm - Class in org.goplanit.algorithms.shortestpath: Dijkstra's shortest path algorithm Dijkstra's shortest path is a one-to-all implementation of the shortest path algorithm based on the generalized costs on each link segment (edge).
DijkstraShortestPathAlgorithm(double[], int, int) - Constructor for class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: Constructor for an edge cost based Dijkstra algorithm for finding shortest paths.
DIRECTED_CONNECTOID_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.DirectedConnectoid: the class to use for the additional directed connectoid id generation
DirectedConnectoid - Interface in org.goplanit.utils.zoning: A directed connectoid is referring to an edge segment in a network (layer) which is directed for access hence, the connectoid also being directed TODO: we can potentially get rid of UndirectedConnectoid and let DirectedConnectoid extend from base since they now both rely on accessNodes
DirectedConnectoidFactory - Interface in org.goplanit.utils.zoning: Factory interface for directed connectoids
DirectedConnectoidFactoryImpl - Class in org.goplanit.zoning: Factory for creating directed connectoids (on container)
DirectedConnectoidFactoryImpl(IdGroupingToken, DirectedConnectoids) - Constructor for class org.goplanit.zoning.DirectedConnectoidFactoryImpl: Constructor
directedConnectoidId - Variable in class org.goplanit.zoning.DirectedConnectoidImpl: unique id across directed connectoids
DirectedConnectoidImpl - Class in org.goplanit.zoning: Undirected connectoid connecting one or more (transfer/OD) zone(s) to the physical road network, each connection will yield a connectoid edge and two connectoid segments when constructing the transport network internally based on the referenced node
DirectedConnectoidImpl(IdGroupingToken, LinkSegment) - Constructor for class org.goplanit.zoning.DirectedConnectoidImpl: Constructor
DirectedConnectoidImpl(IdGroupingToken, LinkSegment, Zone, double) - Constructor for class org.goplanit.zoning.DirectedConnectoidImpl: Constructor
DirectedConnectoidImpl(DirectedConnectoidImpl) - Constructor for class org.goplanit.zoning.DirectedConnectoidImpl: Copy constructor
directedConnectoids - Variable in class org.goplanit.zoning.DirectedConnectoidFactoryImpl: container to use
DirectedConnectoids - Interface in org.goplanit.utils.zoning: container and factory class for directed connectoids
DirectedConnectoidsImpl - Class in org.goplanit.zoning: Implementation of directed connectoids class
DirectedConnectoidsImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.DirectedConnectoidsImpl: Constructor
DirectedConnectoidsImpl(IdGroupingToken, DirectedConnectoidFactory) - Constructor for class org.goplanit.zoning.DirectedConnectoidsImpl: Constructor
DirectedConnectoidsImpl(DirectedConnectoidsImpl) - Constructor for class org.goplanit.zoning.DirectedConnectoidsImpl: Copy constructor
DirectedEdge - Interface in org.goplanit.utils.graph.directed: Directed Edge interface connecting two vertices in a directional fashion.
DirectedEdgeFactory - Interface in org.goplanit.utils.graph.directed: Factory interface for creating directed edges.
DirectedEdgeFactoryImpl - Class in org.goplanit.graph.directed: Factory for creating directed edges on directed edges container
DirectedEdgeFactoryImpl(IdGroupingToken, DirectedEdges) - Constructor for class org.goplanit.graph.directed.DirectedEdgeFactoryImpl: Constructor
DirectedEdgeImpl - Class in org.goplanit.graph.directed: Edge class connecting two vertices via some geometry.
DirectedEdgeImpl(DirectedEdgeImpl) - Constructor for class org.goplanit.graph.directed.DirectedEdgeImpl: Copy Constructor.
DirectedEdgeImpl(IdGroupingToken, DirectedVertex, DirectedVertex) - Constructor for class org.goplanit.graph.directed.DirectedEdgeImpl: Constructor which injects link lengths directly
DirectedEdgeImpl(IdGroupingToken, DirectedVertex, DirectedVertex, double) - Constructor for class org.goplanit.graph.directed.DirectedEdgeImpl: Constructor which injects link lengths directly
DirectedEdges - Interface in org.goplanit.utils.graph.directed: Container and managing class for directed edges in a graph.
DirectedEdgesImpl - Class in org.goplanit.graph.directed: Implementation of DirectedEdges interface
DirectedEdgesImpl(DirectedEdgesImpl) - Constructor for class org.goplanit.graph.directed.DirectedEdgesImpl: Copy constructor
DirectedEdgesImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.directed.DirectedEdgesImpl: Constructor
DirectedEdgesImpl(IdGroupingToken, DirectedEdgeFactory) - Constructor for class org.goplanit.graph.directed.DirectedEdgesImpl: Constructor
DirectedGraph<V extends DirectedVertex,E extends DirectedEdge,ES extends EdgeSegment> - Interface in org.goplanit.utils.graph.directed: Interface for a directed graph with explicit container types rather than the base containers.
DirectedGraphImpl<V extends DirectedVertex,E extends DirectedEdge,ES extends EdgeSegment> - Class in org.goplanit.graph.directed: A directed graph implementation consisting of directed vertices, directed edges and edge segments
DirectedGraphImpl(DirectedGraphImpl<V, E, ES>) - Constructor for class org.goplanit.graph.directed.DirectedGraphImpl: Copy constructor
DirectedGraphImpl(IdGroupingToken, GraphEntities<V>, GraphEntities<E>, GraphEntities<ES>) - Constructor for class org.goplanit.graph.directed.DirectedGraphImpl: DirectedGraph Constructor
DirectedGraphModificationEvent - Interface in org.goplanit.utils.graph.modifier.event: Interface for the group of events that are used around directed graph modification
DirectedGraphModifier - Interface in org.goplanit.utils.graph.modifier: Modify directed graph elements .
DirectedGraphModifierEventProducer - Interface in org.goplanit.utils.graph.modifier.event: Interface dedicated to the DirectedGraphModifier event related exposed methods.
DirectedGraphModifierEventType - Class in org.goplanit.utils.graph.modifier.event: Directed graph modifier event type class.
DirectedGraphModifierEventType(String) - Constructor for class org.goplanit.utils.graph.modifier.event.DirectedGraphModifierEventType: Constructor
DirectedGraphModifierImpl - Class in org.goplanit.graph.modifier: Implementation of a directed graph modifier that supports making changes to any untyped directed graph.
DirectedGraphModifierImpl(UntypedDirectedGraph<?, ?, ?>) - Constructor for class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Constructor.
DirectedGraphModifierListener - Interface in org.goplanit.utils.graph.modifier.event: To serve as base listener class for all directed graph modification events, where its onX method provides any graph modification event as parameter
DirectedPath - Interface in org.goplanit.utils.path: Path interface representing a path through the network on edge segment level
DirectedPathFactory - Interface in org.goplanit.utils.path: Factory interface for directed paths
DirectedPathFactoryImpl - Class in org.goplanit.path: Factory for creating directed paths on container
DirectedPathFactoryImpl(IdGroupingToken) - Constructor for class org.goplanit.path.DirectedPathFactoryImpl: Constructor
DirectedPathImpl - Class in org.goplanit.path: This object represents a path based on a number of consecutive LinkSegments The path creation makes use of the fact that the origin pair will have a null EdgeSegment, so there is no need to specify the origin.
DirectedPathImpl(IdGroupingToken) - Constructor for class org.goplanit.path.DirectedPathImpl: Constructor
DirectedPathImpl(IdGroupingToken, Deque<? extends EdgeSegment>) - Constructor for class org.goplanit.path.DirectedPathImpl: Constructor
DirectedPaths - Interface in org.goplanit.utils.path: Support directed paths as container and factory class
DirectedPathsImpl - Class in org.goplanit.path: Implementation of DirectedPaths interface
DirectedPathsImpl(DirectedPathsImpl) - Constructor for class org.goplanit.path.DirectedPathsImpl: Copy constructor
DirectedPathsImpl(IdGroupingToken) - Constructor for class org.goplanit.path.DirectedPathsImpl: Constructor
DirectedPathsImpl(IdGroupingToken, ContainerisedDirectedPathFactoryImpl) - Constructor for class org.goplanit.path.DirectedPathsImpl: Constructor
DirectedSubGraph - Interface in org.goplanit.utils.graph.directed: A directed subgraph interface for a given parent graph by registering edge segments on it (and therefore vertices and edges)
DirectedVertex - Interface in org.goplanit.utils.graph.directed: Directed vertex representation connected to one or more edge segments that have direction.
DirectedVertexFactory - Interface in org.goplanit.utils.graph.directed: Factory interface for creating vertex instances
DirectedVertexFactoryImpl - Class in org.goplanit.graph.directed: Factory for creating vertices on vertices container
DirectedVertexFactoryImpl(IdGroupingToken, DirectedVertices) - Constructor for class org.goplanit.graph.directed.DirectedVertexFactoryImpl: Constructor
DirectedVertexImpl - Class in org.goplanit.graph.directed: vertex representation connected to one or more entry and exit edges
DirectedVertexImpl(DirectedVertexImpl) - Constructor for class org.goplanit.graph.directed.DirectedVertexImpl: Copy constructor
DirectedVertexImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.directed.DirectedVertexImpl: Constructor
DirectedVertices - Interface in org.goplanit.utils.graph.directed: Container class for directed vertices and creating instances within this container via factory.
DirectedVerticesImpl - Class in org.goplanit.graph.directed: DirectedVertices implementation container and factory access
DirectedVerticesImpl(DirectedVerticesImpl) - Constructor for class org.goplanit.graph.directed.DirectedVerticesImpl: Copy constructor
DirectedVerticesImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.directed.DirectedVerticesImpl: Constructor
DirectedVerticesImpl(IdGroupingToken, DirectedVertexFactory) - Constructor for class org.goplanit.graph.directed.DirectedVerticesImpl: Constructor
DIRECTION - Static variable in class org.goplanit.osm.tags.OsmDirectionTags: key
DIRECTION_ID - org.goplanit.gtfs.enums.GtfsKeyType
directPositionsToCoordinates(List<DirectPosition>) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Convert OpenGIS directPosition to JTS coordinates
disableLinkStorageConstraints(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: Dis or enable enforcing any storage constraints on link(segments)
disbandTransportNetwork() - Method in class org.goplanit.assignment.TrafficAssignment: detach the virtual and physical transport network again
discardSubNetworkAbovesize - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: When dangling subnetworks are marked for removal, this threshold determines the maximum subnetwork size for it NOT to be removed.
discardSubNetworkBelowSize - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: When dangling subnetworks are marked for removal, this threshold determines the minimum subnetwork size for it NOT to be removed.
disconnectVerticesFromEdge(Edge) - Method in class org.goplanit.network.transport.TransportModelNetwork: Remove Edge from both vertices
disconnectVerticesFromEdgeSegment(EdgeSegment) - Method in class org.goplanit.network.transport.TransportModelNetwork: Remove edge segment from the incoming or outgoing set of edge segments for the related vertices
DISCOURAGED - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: discouraged tag
DISMOUNT - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: dismount tag mainly used by bicycle mode, possibly horse riders?
DISMOUNT - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
DISTANCE - org.goplanit.utils.unit.UnitGroup
DistanceUnit - Class in org.goplanit.utils.unit: Unit class for all distance related units
DistanceUnit(UnitType) - Constructor for class org.goplanit.utils.unit.DistanceUnit: Constructor
DISUSED - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
DOCTYPE - Static variable in class org.goplanit.matsim.converter.MatsimNetworkWriter: the doc type of MATSIM network
DOCTYPE - Static variable in class org.goplanit.matsim.converter.MatsimZoningWriter: the doc type of MATSIM public transport schedule.
DOG - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags
DOMINICA - Static variable in class org.goplanit.utils.locale.CountryNames
DOT - Static variable in class org.goplanit.utils.misc.FileUtils
dotProduct(double[], double[], int) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Return the dot product of two arrays The dot product is found by multiplying the elements of each array at each position together and then taking the sum of the multiplied values e.g.
DOUBLE - org.goplanit.output.enums.DataType
DOUBLEHYPHEN - org.goplanit.utils.args.ArgumentStyle
doubleStringToBigDecimal(String) - Static method in class org.goplanit.utils.math.TypeConversionUtil: convert a string that can be interpreted as a double to a type that parses double via .valueOf(double theDouble)
doubleValue() - Method in class org.goplanit.utils.function.NullaryDoubleSupplier
DOWNSTREAM - org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary.Location
DOWNSTREAM_NODE_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
DOWNSTREAM_NODE_ID - org.goplanit.output.property.OutputPropertyType
DOWNSTREAM_NODE_ID - org.goplanit.tntp.enums.NetworkFileColumnType
DOWNSTREAM_NODE_LOCATION - org.goplanit.output.property.OutputPropertyType
DOWNSTREAM_NODE_XML_ID - org.goplanit.output.property.OutputPropertyType
DownstreamNodeExternalIdOutputProperty - Class in org.goplanit.output.property
DownstreamNodeExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
DownstreamNodeIdOutputProperty - Class in org.goplanit.output.property
DownstreamNodeIdOutputProperty() - Constructor for class org.goplanit.output.property.DownstreamNodeIdOutputProperty
DownstreamNodeLocationOutputProperty - Class in org.goplanit.output.property
DownstreamNodeLocationOutputProperty() - Constructor for class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
DownstreamNodeXmlIdOutputProperty - Class in org.goplanit.output.property
DownstreamNodeXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
DrivingDirectionDefaultByCountry - Class in org.goplanit.utils.locale: convenience class that provides the driving direction per country (left hand drive or not) based on https://en.wikipedia.org/wiki/Left-_and_right-hand_traffic
DrivingDirectionDefaultByCountry() - Constructor for class org.goplanit.utils.locale.DrivingDirectionDefaultByCountry
DROP_OFF_TYPE - org.goplanit.gtfs.enums.GtfsKeyType

E

EAST_TIMOR - Static variable in class org.goplanit.utils.locale.CountryNames
Edge - Interface in org.goplanit.utils.graph: Edge interface connecting two vertices in a non-directional fashion.
EDGE_ID_CLASS - Static variable in interface org.goplanit.utils.graph.Edge: id class for generating ids
EDGE_SEGMENT_ID_CLASS - Static variable in interface org.goplanit.utils.graph.EdgeSegment: id class for generating ids
EdgeFactory - Interface in org.goplanit.utils.graph: Factory interface for creating edge instances
EdgeFactoryImpl - Class in org.goplanit.graph: Factory for creating edges on edges container
EdgeFactoryImpl(IdGroupingToken, Edges) - Constructor for class org.goplanit.graph.EdgeFactoryImpl: Constructor
EdgeImpl - Class in org.goplanit.graph: Edge class connecting two vertices via some geometry.
EdgeImpl(EdgeImpl) - Constructor for class org.goplanit.graph.EdgeImpl: Copy constructor, input properties are copied using serialisation/deserialisation because shallow copy is considered dangerous
EdgeImpl(IdGroupingToken, Vertex, Vertex) - Constructor for class org.goplanit.graph.EdgeImpl: Constructor which injects link lengths directly
EdgeImpl(IdGroupingToken, Vertex, Vertex, double) - Constructor for class org.goplanit.graph.EdgeImpl: Constructor which injects link lengths directly
edges - Variable in class org.goplanit.graph.UntypedGraphImpl: class instance containing all edges
edges - Variable in class org.goplanit.graph.VertexImpl: Edges of this vertex
Edges - Interface in org.goplanit.utils.graph: Container and factory class for edges in a graph, also to be used to create and register edges of any (derived) type
EdgeSegment - Interface in org.goplanit.utils.graph: EdgeSegment represents an edge in a particular (single) direction.
edgeSegmentCosts - Variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: The cost for each edge to determine shortest paths
edgeSegmentCosts - Variable in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: Track the cost for each edge to determine shortest paths
EdgeSegmentFactory - Interface in org.goplanit.utils.graph.directed: Factory interface for creating edge segment instances
EdgeSegmentFactoryImpl - Class in org.goplanit.graph.directed: Factory for creating edge segments on edge segments container
EdgeSegmentFactoryImpl(IdGroupingToken, EdgeSegments) - Constructor for class org.goplanit.graph.directed.EdgeSegmentFactoryImpl: Constructor
EdgeSegmentImpl - Class in org.goplanit.graph.directed: EdgeSegment represents an edge in a particular (single) direction.
EdgeSegmentImpl(EdgeSegmentImpl) - Constructor for class org.goplanit.graph.directed.EdgeSegmentImpl: Copy constructor
EdgeSegmentImpl(IdGroupingToken, boolean) - Constructor for class org.goplanit.graph.directed.EdgeSegmentImpl: Constructor (without setting parent edge)
EdgeSegmentImpl(IdGroupingToken, DirectedEdge, boolean) - Constructor for class org.goplanit.graph.directed.EdgeSegmentImpl: Constructor
edgeSegments - Variable in class org.goplanit.graph.directed.UntypedDirectedGraphImpl: class instance containing all edge segments
EdgeSegments - Interface in org.goplanit.utils.graph.directed: Container and factory class for edge segments in a graph, also to be used to create and register edge segments of any (derived) type
EdgeSegmentsImpl - Class in org.goplanit.graph.directed: Implementation of EdgeSegments interface.
EdgeSegmentsImpl(EdgeSegmentsImpl) - Constructor for class org.goplanit.graph.directed.EdgeSegmentsImpl: Copy constructor
EdgeSegmentsImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.directed.EdgeSegmentsImpl: Constructor
EdgeSegmentsImpl(IdGroupingToken, EdgeSegmentFactory) - Constructor for class org.goplanit.graph.directed.EdgeSegmentsImpl: Constructor
EdgesImpl - Class in org.goplanit.graph: Implementation of Edges interface
EdgesImpl(EdgesImpl) - Constructor for class org.goplanit.graph.EdgesImpl: Copy constructor
EdgesImpl(EdgeFactory) - Constructor for class org.goplanit.graph.EdgesImpl: Constructor
EdgesImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.EdgesImpl: Constructor
ELEVATOR - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
eligibleOsmModes - Variable in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: track the osm modes that we are considering for the lanes:mode:*=* scheme
eligiblePublicServiceVehicleModes - Variable in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: track the public service vehicle modes that are eligible for this instance
ELTM - Static variable in class org.goplanit.assignment.TrafficAssignment: short hand to choose eLTM as assignment type
END_DATE - org.goplanit.gtfs.enums.GtfsKeyType
END_OF_METADATA_INDICATOR - Static variable in class org.goplanit.tntp.TntpHeaderConstants
END_TIME - org.goplanit.gtfs.enums.GtfsKeyType
endXmlDocument(Pair<XMLStreamWriter, Writer>) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: end the XML document and close the writers, streams etc.
ENFORCEMENT - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
ENGLAND - Static variable in class org.goplanit.utils.locale.CountryNames
entryEdgeSegments - Variable in class org.goplanit.graph.directed.DirectedVertexImpl: Entry edge segments which connect to this vertex
EnumConversionUtil - Class in org.goplanit.io.xml.util: Some methods to convert the XML schema enums to PLANit memory model enums
EnumConversionUtil() - Constructor for class org.goplanit.io.xml.util.EnumConversionUtil
EnumConverter - Interface in org.goplanit.io.xml.converter: Utility methods to convert enumerations from the PLANit org.planit.output.enums package into enumerations generated from the output XSD file
EpsgCodesByCountry - Class in org.goplanit.utils.epsg: convenience method that provides a mapping from country name to a possible EPSG coordinate reference system code, e.g., "EPSG:1234".
EpsgCodesByCountry() - Constructor for class org.goplanit.utils.epsg.EpsgCodesByCountry
EPSILON_12 - Static variable in class org.goplanit.utils.math.Precision
EPSILON_15 - Static variable in class org.goplanit.utils.math.Precision
EPSILON_18 - Static variable in class org.goplanit.utils.math.Precision
EPSILON_3 - Static variable in class org.goplanit.utils.math.Precision
EPSILON_6 - Static variable in class org.goplanit.utils.math.Precision: the default Epsilon unless indicated otherwise
EPSILON_9 - Static variable in class org.goplanit.utils.math.Precision
equals(Object) - Method in class org.goplanit.component.PlanitComponent
equals(Object) - Method in class org.goplanit.gtfs.scheme.GtfsFileScheme: equals when both enums are identical
equals(Object) - Method in class org.goplanit.output.property.OutputProperty: Overridden equals() method This method is needed to allow output properties to be removed from the output list if required.
equals(Object) - Method in class org.goplanit.utils.event.EventType
equals(Object) - Method in class org.goplanit.utils.id.IdAbleImpl
equals(Object) - Method in class org.goplanit.utils.id.IdGroupingToken
equals(Object) - Method in class org.goplanit.utils.misc.Pair: Compare to another pair
equals(Object) - Method in class org.goplanit.utils.unit.GroupUnit
equals(Object) - Method in class org.goplanit.utils.unit.SimpleUnit
equals(LinkSegmentExpectedResultsDto) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Tests whether this ResultDto object is equal to another one
ESWATINI - Static variable in class org.goplanit.utils.locale.CountryNames
Event - Interface in org.goplanit.utils.event: The Event interface defines a typed event (using the EventType).
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateComponentEvent: event type fired off when edge has been broken
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateDemandsEvent: event type fired off when demands need to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateFundamentalDiagramEvent: event type fired off when fundamental diagram component needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateGapFunctionEvent: event type fired off when gap function needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: event type fired off when initial costs (without specific time period) needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateNetworkEvent: event type fired off when network needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulatePhysicalCostEvent: event type fired off when a physical cost component needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateRoutedServicesEvent: event type fired off when network needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateServiceNetworkEvent: event type fired off when network needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.component.event.PopulateZoningEvent: event type fired off when zoning needs to be populated
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.BreakEdgeEvent: event type fired off when edge has been broken
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.BreakEdgeSegmentEvent: event type fired off when edge has been broken
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeEvent: event type fired off when sub graph edge has been removed
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeSegmentEvent: event type fired off when sub graph edge segment has been removed
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.RemoveSubGraphEvent: event type fired off when sub graph vertex has been removed
EVENT_TYPE - Static variable in class org.goplanit.graph.modifier.event.RemoveSubGraphVertexEvent: event type fired off when sub graph vertex has been removed
EVENT_TYPE - Static variable in class org.goplanit.zoning.modifier.event.ModifiedZoneIdsEvent: event type fired off when zone ids have been modified
EventBasedLtm - Class in org.goplanit.assignment.ltm.eltm: Event based Link Transmission Model implementation (eLTM) for network loading using a capacity constrained (Deterministic) assignment
EventBasedLtm(EventBasedLtm) - Constructor for class org.goplanit.assignment.ltm.eltm.EventBasedLtm: Copy Constructor
EventBasedLtm(IdGroupingToken) - Constructor for class org.goplanit.assignment.ltm.eltm.EventBasedLtm: Constructor
EventBasedLtmConfigurator - Class in org.goplanit.assignment.ltm.eltm: Configurator for eLTM Fundamental diagram: NEWELL Node Model: TAMPERE
EventBasedLtmConfigurator() - Constructor for class org.goplanit.assignment.ltm.eltm.EventBasedLtmConfigurator: Constructor
EventBasedLtmTrafficAssignmentBuilder - Class in org.goplanit.assignment.ltm.eltm: The eLTM traffic assignment builder.
EventBasedLtmTrafficAssignmentBuilder(IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.assignment.ltm.eltm.EventBasedLtmTrafficAssignmentBuilder: Constructor
EventImpl - Class in org.goplanit.utils.event: The Base implementation for LocalEvent interface.
EventImpl(EventType, Object, Object) - Constructor for class org.goplanit.utils.event.EventImpl: Constructor
EventImpl(EventType, Object, Object[]) - Constructor for class org.goplanit.utils.event.EventImpl: Constructor
EventListener - Interface in org.goplanit.utils.event: Base interface for event listeners.
EventListenerPriority - Enum in org.goplanit.utils.event: Priority that a listener can claim upon registration for events.
EventProducer - Interface in org.goplanit.utils.event: Interface to signify event producers.
EventProducerImpl - Class in org.goplanit.utils.event: The EventProducer is the base class able to produce events.
EventProducerImpl() - Constructor for class org.goplanit.utils.event.EventProducerImpl: Constructs a new EventProducer and checks for duplicate values in event types.
EventType - Class in org.goplanit.utils.event: Event type wraps a String representing the unique name identifier for an event.
EventType(String) - Constructor for class org.goplanit.utils.event.EventType: Constructor
EXACT_TIMES - org.goplanit.gtfs.enums.GtfsKeyType
EXCEPTION_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
excludeColumns(GtfsKeyType...) - Method in class org.goplanit.gtfs.reader.GtfsFileReaderSettings: Exclude one or more columns from in memory object to for example reduce the memory foot print
excludedOsmWays - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: allow users to provide OSM way ids for ways that we are not to parse, for example when we know the original coding or tagging is problematic
excludeLinksOnWrongSideOf(Geometry, Collection<Link>, boolean, Collection<Mode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitLinkUtils: create a subset of links from the passed in ones, removing all links for which we can be certain that geometry is located on the wrong side of the road infrastructure geometry.
excludeOsmNodeById(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM id of node that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a stop_position, station, platform, etc.
excludeOsmNodesById(Number...) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM ids of nodes that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a stop_position, station, platform, etc.
excludeOsmNodesById(Collection<Number>) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM ids of nodes that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a stop_position, station, platform, etc.
excludeOsmWayById(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM id of way that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a station, platform, etc.
excludeOsmWayFromParsing(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: exclude specific OSM ways from being parsed based on their id
excludeOsmWaysById(Number...) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM ids of ways that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a station, platform, etc.
excludeOsmWaysById(Collection<Number>) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide OSM ids of ways that we are not to parse as public transport infrastructure, for example when we know the original coding or tagging is problematic for a station, platform, etc.
excludeOsmWaysFromParsing(Number...) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: exclude specific OSM ways from being parsed based on their id
excludeOsmWaysFromParsing(List<Number>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: exclude specific OSM ways from being parsed based on their id.
excludeOsmWayTypesWithoutActivatedModes() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: explicitly exclude all osmWay types that are included but have no more activated modes due to deactivation of their default assigned modes.
excludeOsmWayTypesWithoutActivatedModes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: explicitly exclude all osmWay types that are included but have no more activated modes due to deactivation of their default assigned modes.
execute() - Method in class org.goplanit.assignment.TrafficAssignment: Execute assignment, including initializing resources, running equilibration and then closing resources
execute(double[], double[], int) - Method in class org.goplanit.sdinteraction.smoothing.MSASmoothing: Apply smoothing based on the current step size
execute(double[], double[], int) - Method in class org.goplanit.sdinteraction.smoothing.Smoothing: Apply smoothing based on the current step size
execute(double, double) - Method in class org.goplanit.sdinteraction.smoothing.MSASmoothing: Apply smoothing based on the current step size
execute(double, double) - Method in class org.goplanit.sdinteraction.smoothing.Smoothing: Apply smoothing based on the current step size
execute(String, String, String, String, String, String, boolean, int, double, Unit, double) - Method in class org.goplanit.tntp.TntpMain: Top-level method which runs PLANit for TNTP format input
executeAllTrafficAssignments() - Method in class org.goplanit.io.project.PlanItSimpleProject: Execute all registered traffic assignments Top-level error recording is done in this class.
executeAllTrafficAssignments() - Method in class org.goplanit.project.CustomPlanItProject: Execute all registered traffic assignments Top-level error recording is done in this class.
executeEquilibration() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm
executeEquilibration() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Run equilibration after resources initialized, including saving results
executeEquilibration() - Method in class org.goplanit.assignment.StaticTrafficAssignment: Execute equilibration over all time periods and modes
executeEquilibration() - Method in class org.goplanit.assignment.TrafficAssignment: Run equilibration after resources initialized, including saving results
executeFlowShift(double, double, double[]) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Shift flows for this PAS given the currently known costs and smoothing procedure to apply
executeNetworkCostsUpdate(Mode, boolean, double[]) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Perform an update of the network wide costs where a partial update is applied in case only potentially blocking nodes are updated during the loading
executeNetworkLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Perform a network loading based on the current assignment state
executeOneToAll(DirectedVertex) - Method in class org.goplanit.algorithms.shortestpath.AcyclicMinMaxShortestPathAlgorithm: Perform a one-to-all min-max path search where we construct both the least and most costliest path from the origin vertex provided to all other vertices in the (sub)graph.
executeOneToAll(DirectedVertex) - Method in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: Construct shortest paths from source node to all other nodes in the network based on directed LinkSegment edges
executeOneToAll(DirectedVertex) - Method in interface org.goplanit.algorithms.shortestpath.OneToAllShortestPathAlgorithm: Construct shortest paths from source node to all other nodes in the network based on directed LinkSegment edges
executeOneToOne(DirectedVertex, DirectedVertex) - Method in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: Construct shortest paths from source node to all other nodes in the network based on directed LinkSegment edges
executeOneToOne(DirectedVertex, DirectedVertex) - Method in interface org.goplanit.algorithms.shortestpath.OneToOneShortestPathAlgorithm: Construct shortest paths from source node to all other nodes in the network based on directed LinkSegment edges
executeTimePeriod(TimePeriod) - Method in class org.goplanit.assignment.StaticTrafficAssignment: Perform assignment for a given time period
executeTimePeriod(TimePeriod, Set<Mode>) - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Execute the time period for the registered modes
executeTimePeriod(TimePeriod, Set<Mode>) - Method in class org.goplanit.assignment.algorithmb.AlgorithmBEquilibration: The method that performs the equilibration for a given time period using AlgorithmB
executeTimePeriod(TimePeriod, Set<Mode>) - Method in class org.goplanit.assignment.StaticTrafficAssignment: Execute the time period for the registered modes
executeTimePeriod(TimePeriod, Set<Mode>) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Perform assignment for a given time period using Dijkstra's algorithm
executeTrafficAssignment(TrafficAssignment) - Method in class org.goplanit.project.CustomPlanItProject: Execute a particular traffic assignment
exitEdgeSegments - Variable in class org.goplanit.graph.directed.DirectedVertexImpl: Exit edge segments which connect to this vertex
EXTERNAL_ID - org.goplanit.converter.IdMapperType
ExternalIdAble - Interface in org.goplanit.utils.id: A class implementing this interface signals that it is external id-able.
ExternalIdAbleImpl - Class in org.goplanit.utils.id: Implementation of ExternalIdable interface including hash and equals based on id
ExternalIdAbleImpl(long) - Constructor for class org.goplanit.utils.id.ExternalIdAbleImpl: Constructor
ExternalIdAbleImpl(ExternalIdAbleImpl) - Constructor for class org.goplanit.utils.id.ExternalIdAbleImpl: Copy constructor
extractClosestLineSegmentTo(Geometry, T, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Extract the JTS line segment from the edge segment that is closest to the reference geometry in its intended direction.
extractClosestLineSegmentToGeometryFromLinkSegment(Geometry, MacroscopicLinkSegment, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitLinkSegmentUtils: Extract a JTS line segment based on the closest two coordinates on the link segment geometry in its intended direction to the reference geometry provided
extractClosestProjectedLinearLocationOnEdgeForTransferZone(TransferZone, Edge, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Find the linear location reflecting the closest projected location between the transfer zone and link geometries.
extractCompatibleOsmModes(Collection<String>, Collection<String>, boolean) - Static method in class org.goplanit.osm.util.OsmModeUtils: Find out if modes to check are compatible with the reference OSM modes.
extractCountryNameFromFile(Path) - Static method in class org.goplanit.osm.defaults.CountrySpecificDefaultUtils: Validate if file is a valid resource file and its name is constructed based on a country code.
extractDestinationCrsCompatibleCoordinate(Point) - Method in class org.goplanit.matsim.converter.MatsimWriter: Using the destination crs and its transformer extract the coordinate from the position in the desired crs
extractDirectedConnectoids(OsmNode, Map<String, String>, Collection<TransferZone>, Collection<Mode>, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: create and/or update directed connectoids for the transfer zones and mode combinations when eligible, based on the passed in OSM node where the connectoids access link segments are extracted from
extractDirectedConnectoidsForMode(OsmNode, TransferZone, Mode, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: create and/or update directed connectoids for the given mode and layer based on the passed in osm node (location) where the connectoids access link segments are extracted for.
extractDirectedConnectoidsForMode(Point, TransferZone, Mode, Collection<Link>, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: create and/or update directed connectoids for the given mode and layer based on the passed in location where the connectoids access link segments are extracted for.
extractDirectedConnectoidsForStandAloneTransferZoneByPlanitLink(long, Geometry, Link, TransferZone, Mode, double, MacroscopicNetworkLayer) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: create connectoids not based on osm node location but based on auto-generated geographic location on the provided link's link segments by finding either a close enough existing coordinate (osm node), or if not close enough a newly created coordinate at the appropriate position.
extractGeometry(OsmEntity, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.PlanitOsmUtils: extract geometry from the osm entity, either a point, line string or polygon
extractGeometry(OsmEntity, Map<Long, OsmNode>, Level) - Static method in class org.goplanit.osm.util.PlanitOsmUtils: extract geometry from the osm entity, either a point, line string or polygon
extractGeometry(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: extract geometry from the osm way which can either be a line string or polygon
extractGeometry(OsmWay, Map<Long, OsmNode>, Level) - Static method in class org.goplanit.osm.util.OsmWayUtils: extract geometry from the osm way which can either be a line string or polygon
extractLineString(OsmWay, int, int, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Extract the geometry for the passed in way as line string for the given nodes
extractLineString(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Extract the geometry for the passed in way as line string
extractLineStringNoThrow(OsmWay, int, int, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Identical to OsmWayUtils.extractLineString(de.topobyte.osm4j.core.model.iface.OsmWay,java.util.Map<java.lang.Long,de.topobyte.osm4j.core.model.iface.OsmNode>), except it does not throw exceptions, but simply logs any issues found
extractLineStringNoThrow(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Identical to OsmWayUtils.extractLineString(de.topobyte.osm4j.core.model.iface.OsmWay,java.util.Map<java.lang.Long,de.topobyte.osm4j.core.model.iface.OsmNode>), except it does not throw exceptions, but simply logs any issues found
extractLinkSegmentTypes(OsmWay, Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: extract the correct link segment type based on the configuration of supported modes, the defaults for the given osm way and any modifications to the mode access based on the passed in tags of the OSM way
extractOsmEntityType(TransferZone) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Extract the OSM entity type from a PLANit Transfer zone
extractOsmWay(OsmWay, Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: extract OSM way's PLANit infrastructure for the entire way, i.e., link, nodes, and link segments where applicable.
extractPartialOsmWay(OsmWay, Map<String, String>, int, int, boolean) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: Extract OSM way's PLANit infrastructure for the part of the way that is indicated.
extractPartialOsmWay(OsmWay, Map<String, String>, int, int, boolean, Pair<MacroscopicLinkSegmentType, MacroscopicLinkSegmentType>) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: extract OSM way's PLANit infrastructure for the part of the way that is indicated.
extractPoint(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: creates a point geoetry using the first available node from the nodes on the osm way.
extractPolygon(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Extract the geometry for the passed in way as polygon (assumed it has been identified as such already)
extractPolygonNoThrow(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: identical to OsmWayUtils.extractPolygon(de.topobyte.osm4j.core.model.iface.OsmWay,java.util.Map<java.lang.Long,de.topobyte.osm4j.core.model.iface.OsmNode>), except it does not throw exceptions, but simply logs any issues found and tries to salvage the polygon by creating it out of the coordinates that are available as lnog as we can still create a closed 2D shape.
extractPublicTransportModesFrom(Collection<String>) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect all pt modes available from the passed in modes across all major mode types (road, rail, water)
extractSrsName(PlanitXmlWriterSettings) - Static method in class org.goplanit.io.converter.PlanitWriterImpl: Extract the src name to use based on the available crs information on network and settings
extractTransferInfrastructure(OsmNode, OsmPtVersionScheme, Map<String, String>) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: extract the transfer infrastructure which will contribute to newly created transfer zones on the zoning instance
extractTransferInfrastructure(OsmWay, OsmPtVersionScheme, Map<String, String>) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: extract the transfer infrastructure which will contribute to newly created transfer zones on the zoning instance
extractTransferZoneTypeFromPtv1Tags(OsmNode, Map<String, String>) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Collect the transfer zone type based on the tags

F

factory - Variable in class org.goplanit.network.layers.MacroscopicNetworkLayersImpl: factory to use for creating layer instances
factory - Variable in class org.goplanit.network.layers.ServiceNetworkLayersImpl: factory to use for creating layer instances
factory - Variable in class org.goplanit.service.routed.RoutedServicesLayersImpl: factory for this container class
factory - Variable in class org.goplanit.service.routed.RoutedTripsImpl: factory for this container class
FALKLAND_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
FARE_ATTRIBUTE - org.goplanit.gtfs.enums.GtfsObjectType
FARE_ATTRIBUTES - org.goplanit.gtfs.enums.GtfsFileType
FARE_ID - org.goplanit.gtfs.enums.GtfsKeyType
FARE_RULE - org.goplanit.gtfs.enums.GtfsObjectType
FARE_RULES - org.goplanit.gtfs.enums.GtfsFileType
FEED_CONTACT_EMAIL - org.goplanit.gtfs.enums.GtfsKeyType
FEED_CONTACT_URL - org.goplanit.gtfs.enums.GtfsKeyType
FEED_END_DATE - org.goplanit.gtfs.enums.GtfsKeyType
FEED_INFO - org.goplanit.gtfs.enums.GtfsFileType
FEED_INFO - org.goplanit.gtfs.enums.GtfsObjectType
FEED_LANG - org.goplanit.gtfs.enums.GtfsKeyType
FEED_PUBLISHER_NAME - org.goplanit.gtfs.enums.GtfsKeyType
FEED_PUBLISHER_URL - org.goplanit.gtfs.enums.GtfsKeyType
FEED_START_DATE - org.goplanit.gtfs.enums.GtfsKeyType
FEED_VERSION - org.goplanit.gtfs.enums.GtfsKeyType
FEET - org.goplanit.tntp.enums.LengthUnits
FEET_MIN - org.goplanit.tntp.enums.SpeedUnits
FERRY - Static variable in class org.goplanit.osm.tags.OsmWaterModeTags
FIELD_NAME - org.goplanit.gtfs.enums.GtfsKeyType
FIELD_VALUE - org.goplanit.gtfs.enums.GtfsKeyType
FIJI - Static variable in class org.goplanit.utils.locale.CountryNames
FileOutputFormatter - Class in org.goplanit.output.formatter: Common methods used by output formatters which write data to physical files
FileOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.output.formatter.FileOutputFormatter: Constructor
FileUtils - Class in org.goplanit.utils.misc: Lightweight File utilities
FileUtils() - Constructor for class org.goplanit.utils.misc.FileUtils
filterModeCompatibleLinks(Collection<String>, Collection<Link>, boolean) - Method in class org.goplanit.osm.converter.helper.OsmModeHelper: Find all links with at least one compatible mode (and PLANit mode mapped) based on the passed in reference OSM modes and potential links In case no eligible modes are provided (null), we allow any transfer zone with at least one valid mapped mode
filterModeCompatibleTransferZones(Collection<String>, Collection<TransferZone>, boolean) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Find all transfer zones with at least one compatible mode (and PLANit mode mapped) based on the passed in reference osm modes In case no eligible modes are provided (null), we allow any transfer zone with at least one valid mapped mode
finaliseAfterSimulation() - Method in class org.goplanit.output.OutputManager: Allows the output manager to finalise itself and any of its registered output formatters to after the simulation ended
finaliseAfterSimulation(OutputConfiguration, OutputAdapter) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Finalize the persistence after the simulation.
finaliseAfterSimulation(OutputConfiguration, OutputAdapter) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Close all resources used in this formatter
finaliseAfterSimulation(OutputConfiguration, OutputAdapter) - Method in interface org.goplanit.output.formatter.OutputFormatter: Close resources to store results
finaliseAfterSimulation(OutputConfiguration, OutputAdapter) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Close output CSV file for a specified output type configuration
finalizeAfterExecution() - Method in class org.goplanit.assignment.TrafficAssignment: Finalize all relevant traffic assignment components after execution of the assignment has ended
findBushAlternativeSubpath(DirectedVertex, short[]) - Method in class org.goplanit.assignment.ltm.sltm.Bush: The alternative subpath (not in this bush) is provided as link segment labels of value -1.
findClosestProjectedCoordinateTo(OsmNode, LineString, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Create a coordinate at the location that represents the closest point between the osmNode and the passed in geometry
findConnectoidLocationForstandAloneTransferZoneOnLink(TransferZone, Link, Mode, double, MacroscopicNetworkLayer) - Method in class org.goplanit.osm.converter.zoning.handler.helper.ConnectoidHelper: find a suitable connectoid location on the given link based on the constraints that it must be able to reside on a linksegment that is in the correct relative position to the transfer zone and supports the access mode on at least one of the designated link segment(s) that is eligible (if any).
findEdgeClosest(OsmEntity, Collection<? extends Edge>, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitOsmUtils: find the link closest to the passed in osm Entity
findEdgeClosest(OsmNode, Collection<? extends Edge>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Find the closest edge to the node location.
findEdgeClosest(OsmNode, Collection<? extends Edge>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Find the closest link to the node location.
findEdgeClosest(OsmWay, Collection<? extends Edge>, double, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: find the closest edge to the way from the available edges.
findEdgeClosest(OsmWay, Collection<? extends Edge>, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: find the closest edge to the way from the available edges.
findEdgeClosest(Geometry, Collection<? extends Edge>, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in geometry using a projection from any existing coordinate on the geometry to the geometry of the link.
findEdgeClosestToLineString(LineString, Collection<? extends Edge>, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in line string using a projection from any existing coordinate on the line string to the geometry of the link.
findEdgeClosestToPoint(Point, Collection<? extends Edge>, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in point using a projection from any existing coordinate on the geometry to the geometry of the link.
findEdgesClosest(Geometry, Collection<? extends Edge>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in geometry as well as all other edges within the provided marging using a projection from any existing coordinate on the geometry to the geometry of the link.
findEdgesClosestToGeometry(Geometry, Collection<? extends Edge>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in geometry as well as all other edges within the given margin using a projection from any existing coordinate on the geometry to the geometry of the link.
findEdgesClosestToLineString(LineString, Collection<? extends Edge>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in line string using a projection from any existing coordinate on the line string to the geometry of the link.
findEdgesClosestToPoint(Point, Collection<? extends Edge>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the edge closest to the passed in point as well as all other edges within the given margin using a projection from any existing coordinate on the geometry to the geometry of the link.
findEdgesSpatially(Envelope, Quadtree) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find edges spatially based on the provided bounding box and spatially indexed quadtree containing edges as values
findEqualAccessPropertiesForAnyMode(AccessGroupProperties) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: find group access properties that are equal to the ones that are passed in except for the allowed modes, i.e., find existing access properties for any mode that match the ones provided.
findEqualAccessPropertiesForAnyMode(AccessGroupProperties) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: find group access properties that are equal to the ones that are passed in except for the allowed modes, i.e., find existing access properties for any mode that match the ones provided.
findFirst(Predicate<V>) - Method in interface org.goplanit.utils.wrapper.MapWrapper: Find first entry that matches the predicate
findFirst(Predicate<V>) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Find first entry that matches the predicate
findFirstAvailableOsmNodeIndexAfter(int, OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: finds the first available osm node index on the osm way
findFirstCoordinatePosition(Coordinate, int, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: find first position where the coordinate resides on the geometry.
findFirstCoordinatePosition(Coordinate, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: find first position where the coordinate resides on the geometry.
findFirstOsmRelationMemberWithRole(OsmRelation, String) - Static method in class org.goplanit.osm.util.OsmRelationUtils: Find the first relation member with the given role
findFirstSuitableExistingPas(Bush, DirectedVertex, double[], double) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: find the first PAS which has the given merge vertex as end vertex and which if we would extend the bush with its least cost alternative would improve to the point it is considered effective enough compared to the upper bound (reduced cost) improvement provided as well as that the bush has sufficient flow on the high cost alternative of the PAS such that it can improve sufficiently by shifting flow towards the new low cost segment.
findIndicesOfFirstLoop(OsmWay, int) - Static method in class org.goplanit.osm.util.OsmWayUtils: Find the start and end index of the first circular component of the passed in way (if any).
findLastAvailableOsmNodeIndexAfter(int, OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Finds the last consecutive available OSM node index after the offset, i.e.
findLinksSpatially(Envelope) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Find links spatially based on the provided bounding box
findMathTransform(CoordinateReferenceSystem, CoordinateReferenceSystem) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Convenience method that wraps the CRS.findMathTransform by catching exceptions and producing a planit excepion only as well as allowing for lenient transformer
findMinimumLineSegmentBetween(OsmWay, LineString, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: find the minimum distance line segment that connects the osmWay to the passed in line string geometry
findMinimumValuePair(Map<? extends T, Double>) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the minimum value pair from this map
findModeCompatibleTransferZoneGroups(Collection<String>, Collection<TransferZone>, boolean) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Find all transfer zone groups with at least one transfer zone that is mode compatible (and planit mode mapped) with the passed in osm modes In case no eligible modes are provided (null).
findMostProminentOsmHighWayType(Set<? extends Edge>) - Static method in class org.goplanit.osm.util.OsmWayUtils: find the most prominent (important) of the edges based on the osm highway type they carry
findMostRestrictingOutLinkSegmentIndex() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Find most restricted unprocessed outgoing link segment based on the scaled sending flows
findOsmNodeWithCoordinate2D(Coordinate, Collection<OsmNode>) - Static method in class org.goplanit.osm.util.OsmNodeUtils: find (first) node who's location coincides with the provided coordinate from the collection of eligible nodes passed in
findPlanitEntitiesDistance(LineString, Collection<? extends T>, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the distances to the line string and the geometry for all given PLANit entities with a supported geometry from the provided collection.
findPlanitEntitiesDistance(Point, Collection<? extends T>, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the distances to the reference point and the geometry for all given PLANit entities with a supported geometry from the provided collection.
findPlanitEntitiesWithinDistance(LineString, Collection<? extends T>, Double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find all PLANit entities within striking distance of the line string from the available entities based on the max distance provided.
findPlanitEntitiesWithinDistance(Point, Collection<? extends T>, Double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find all PLANit entities within striking distance of the line string from the available entities based on the max distance provided.
findPlanitEntityClosest(OsmWay, Collection<? extends T>, double, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: find the closest PLANit entity to the way from the available entities.
findPlanitEntityClosest(LineString, Collection<? extends T>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the closest PLANit entity to the line string from the available entities.
findPlanitEntityClosest(Point, Collection<? extends T>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the closest distance to the reference point and the geometry for some PLANit entity with a supported geometry from the provided collection.
findPlanitEntityDistance(Point, T, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Find the closest distance to the reference point and the geometry for some PLANit entity with a supported geometry from the provided collection.
findPlanitLinksWithInternalLocation(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: We identify which current planit links have the given location registered as internal to them
findTransferZoneClosestByTransferGroup(OsmEntity, Collection<? extends TransferZoneGroup>, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Find the zone (within any of the transfer zone groups) closest to the passed in OSM Entity
findTransferZonesForStopPosition(OsmNode, Map<String, String>, Collection<String>) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Identical to the one with transfer zone group parameter, only here no stop_position is not part of transfer zone group and therefore we only can find matches spatially
findTransferZonesForStopPosition(OsmNode, Map<String, String>, Collection<String>, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Find the transfer zone(s) for a given stop_position, either the user overwritten mapping, or conditioned on mode,reference/name/spatially, or just the closest one in absence of eligible modes.
findZoneClosest(OsmNode, Collection<? extends Zone>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: find the closest zone to the node location.
findZoneClosest(OsmNode, Collection<? extends Zone>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: find the closest zone to the node location.
findZoneClosest(OsmWay, Collection<? extends Zone>, double, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: Find the closest zone to the way .
findZoneClosest(OsmWay, Collection<? extends Zone>, Map<Long, OsmNode>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmWayUtils: Find the closest zone to the way .
findZoneWithClosestCoordinateToNode(OsmNode, Collection<? extends Zone>, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: find the closest zone to the node location.
findZoneWithClosestCoordinateToNode(OsmNode, Collection<? extends Zone>, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: identical to findZoneWithClosest coordinate that requires a maximum search distance.
fireEvent(Event) - Method in class org.goplanit.utils.event.EventProducerImpl: Transmit an event to all interested listeners.
fireEvent(EventListener, Event) - Method in class org.goplanit.component.PlanitComponentFactory: Let derived class deal with the handling of the listener, where based on the derived event implementation the listener's concrete class can be determined which in turn allows for calling the right event callback method which is unknown at this base level since this event mechanism does not force a particular notification method signature on its listener interface
fireEvent(EventListener, Event) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Depending on whether these are directed or undirected evens call the appropriate notification method
fireEvent(EventListener, Event) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Let derived class deal with the handling of the listener, where based on the derived event implementation the listener's concrete class can be determined which in turn allows for calling the right event callback method which is unknown at this base level since this event mechanism does not force a particular notification method signature on its listener interface
fireEvent(EventListener, Event) - Method in class org.goplanit.utils.event.EventProducerImpl: Let derived class deal with the handling of the listener, where based on the derived event implementation the listener's concrete class can be determined which in turn allows for calling the right event callback method which is unknown at this base level since this event mechanism does not force a particular notification method signature on its listener interface
fireEvent(EventListener, Event) - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: Let derived class deal with the handling of the listener, where based on the derived event implementation the listener's concrete class can be determined which in turn allows for calling the right event callback method which is unknown at this base level since this event mechanism does not force a particular notification method signature on its listener interface
first - Variable in class org.goplanit.utils.misc.Pair: The first object in this Pair
first() - Method in class org.goplanit.utils.misc.Pair: Get first object in pair
FIXED - Static variable in interface org.goplanit.cost.virtual.VirtualCost: short hand for configuring fixed virtual cost instance
fixedConnectoidCost - Variable in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Fixed connectoid cost for connectoid segments
FixedConnectoidTravelTimeCost - Class in org.goplanit.cost.virtual: Class holding fixed connectoid costs for each connectoid segment
FixedConnectoidTravelTimeCost(FixedConnectoidTravelTimeCost) - Constructor for class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Copy Constructor
FixedConnectoidTravelTimeCost(IdGroupingToken) - Constructor for class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Constructor
fixedInput - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: fixed inputs to use
FixedVirtualCostConfigurator - Class in org.goplanit.cost.virtual: Configurator for FixedConnectoidTravelTimeCost implementation
FixedVirtualCostConfigurator() - Constructor for class org.goplanit.cost.virtual.FixedVirtualCostConfigurator: Constructor
FLOAT - org.goplanit.output.enums.DataType
FLOW - org.goplanit.output.property.OutputPropertyType
flowAcceptanceFactors - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkFlowUpdateData: Flow acceptance factors to use
flowAcceptanceGapFunction - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: the gap function to apply on global convergence update
FlowOutputProperty - Class in org.goplanit.output.property: Property to provide the Flow rate in PCU/hour.
FlowOutputProperty() - Constructor for class org.goplanit.output.property.FlowOutputProperty
FOOT - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: can be used as key to indicate access for the mode pedestrians , e.g., foot=yes
FOOT - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags
FOOTWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags: footway can be used as highway=footway, or footway=sidewalk/crossing
FOOTWAY - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: can be used as key or value, e.g.
FOOTWAY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
forEachBackwardEdgeSegment(Vertex, Vertex, Consumer<EdgeSegment>) - Method in interface org.goplanit.algorithms.shortestpath.ShortestPathResult: apply consumer to each edge segment on backward path from destination to origin.
forEachEdgeSegment(boolean, Consumer<EdgeSegment>) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Apply consumer to each edgeSegment on one of the cost segments
forEachIn(Collection<T>, Consumer<T>) - Method in interface org.goplanit.utils.wrapper.MapWrapper: apply provided consumer to each element in values as long as that element is registered on this wrapper
forEachMatchingIdIn(Collection<T>, Consumer<T>) - Method in interface org.goplanit.utils.graph.GraphEntities: Apply provided consumer to each element in values as long as that element is registered under the same id.
forEachNonZeroDestinationDemand(OdZones, OdZone, BiConsumer<OdZone, Double>) - Method in interface org.goplanit.od.demand.OdDemands: Apply the provided consumer to each destination of the origin provided that has non zero demands
forEachNonZeroOdDemand(OdZones, TriConsumer<OdZone, OdZone, Double>) - Method in interface org.goplanit.od.demand.OdDemands: Apply the provided consumer to each origin-destination combination found that has non zero demands
forEachOriginDestination(BiConsumer<OdZone, OdZone>) - Method in interface org.goplanit.utils.zoning.OdZones: Loop over all origin destination combinations possible given the registered zones and apply the provided consumer
forEachPas(Consumer<Pas>) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Loop over all Pass
forEachVertex(boolean, Consumer<DirectedVertex>) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Apply consumer to each vertex on one of the cost segments
FORESTRY - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: forestry tag
format5(double) - Static method in class org.goplanit.utils.output.FormatUtils: Outputs a double to five decimal places
format6(double) - Static method in class org.goplanit.utils.output.FormatUtils: Outputs a double to six decimal places
formatObject(Object) - Static method in class org.goplanit.utils.output.OutputUtils: Formats an object (if a double, outputs value to 7 decimal places
FormatUtils - Class in org.goplanit.utils.output: Utility methods for formatting doubles
FormatUtils() - Constructor for class org.goplanit.utils.output.FormatUtils
FORWARD - Static variable in class org.goplanit.osm.tags.OsmDirectionTags: direction subtype for road modes, e.g.
FREE_FLOW_TRAVEL_TIME - org.goplanit.tntp.enums.NetworkFileColumnType
FREEFLOW - Static variable in interface org.goplanit.cost.physical.PhysicalCost: short hand for configuring physical cost with free flow function instance
FreeFlowLinkTravelTimeConfigurator - Class in org.goplanit.cost.physical: Configurator for FreeFlowLinkTravelTimeCost implementation
FreeFlowLinkTravelTimeConfigurator() - Constructor for class org.goplanit.cost.physical.FreeFlowLinkTravelTimeConfigurator: Constructor
FreeFlowLinkTravelTimeCost - Class in org.goplanit.cost.physical: Simplest possible travel time cost, namely fixed to free flow travel time regardless of the flows measured.
FreeFlowLinkTravelTimeCost(FreeFlowLinkTravelTimeCost) - Constructor for class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Copy Constructor
FreeFlowLinkTravelTimeCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Constructor
freeFlowTravelTimePerLinkSegment - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: 2d Array to store free flow travel time for each [mode][link segment] to be used in calculateSegmentCost()
FREESPEED_METER_SECOND - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
FREQUENCIES - org.goplanit.gtfs.enums.GtfsFileType
FREQUENCY - org.goplanit.gtfs.enums.GtfsObjectType
frequencyPerHour - Variable in class org.goplanit.service.routed.RoutedTripFrequencyImpl: frequency of the routed trip per hour
FRIDAY - org.goplanit.gtfs.enums.GtfsKeyType
FROM - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
FROM_STOP_ID - org.goplanit.gtfs.enums.GtfsKeyType
fromHeaderName(String) - Static method in enum org.goplanit.output.property.OutputPropertyType: Returns the enumeration value associated with a specified header name (the header name in input and output files)
fromValue(String) - Static method in enum org.goplanit.gtfs.enums.GtfsKeyType: Construct enum from given value
fromValue(String) - Static method in enum org.goplanit.output.property.OutputPropertyType: Returns the enumeration value associated with the specified class name
FUEL - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
FundamentalDiagram - Interface in org.goplanit.supply.fundamentaldiagram: The base interface for the Fundamental Diagram component type.
FundamentalDiagramBranch - Interface in org.goplanit.supply.fundamentaldiagram: A fundamental diagram has two branches each one can have a particular shape.
FundamentalDiagramComponent - Class in org.goplanit.supply.fundamentaldiagram: Fundamental diagram traffic component.
FundamentalDiagramComponent(FundamentalDiagramComponent) - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Copy constructor
FundamentalDiagramComponent(IdGroupingToken) - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Base constructor
FundamentalDiagramConfigurator<T extends FundamentalDiagramComponent> - Class in org.goplanit.supply.fundamentaldiagram: Base class for all fundamental diagram configurator implementations
FundamentalDiagramConfigurator(Class<T>) - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramConfigurator: Constructor
FundamentalDiagramConfiguratorFactory - Class in org.goplanit.supply.fundamentaldiagram: factory for the fundamental diagram types supported directory by PLANit
FundamentalDiagramConfiguratorFactory() - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramConfiguratorFactory
FundamentalDiagramImpl - Class in org.goplanit.supply.fundamentaldiagram: Base class for fundamental diagram instances
FundamentalDiagramImpl(FundamentalDiagramBranch, FundamentalDiagramBranch) - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: Constructor
FundamentalDiagramImpl(FundamentalDiagramImpl) - Constructor for class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: Copy Constructor
FUNICULAR - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
FUNICULAR - Static variable in class org.goplanit.osm.tags.OsmRailwayTags

G

gap - Variable in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Gap
gap - Variable in class org.goplanit.gap.NormBasedGapFunction: gap
GapFunction - Class in org.goplanit.gap: Abstract base class for gap functions
GapFunction(GapFunction) - Constructor for class org.goplanit.gap.GapFunction: Copy constructor
GapFunction(IdGroupingToken, StopCriterion) - Constructor for class org.goplanit.gap.GapFunction: Constructor
GapFunctionConfigurator<T extends GapFunction> - Class in org.goplanit.gap: Base class for all vgap function configurator implementations
GapFunctionConfigurator(Class<T>) - Constructor for class org.goplanit.gap.GapFunctionConfigurator: Constructor
GapFunctionConfiguratorFactory - Class in org.goplanit.gap: factory for the gap function types supported directory by PLANit
GapFunctionConfiguratorFactory() - Constructor for class org.goplanit.gap.GapFunctionConfiguratorFactory
GENERAL - org.goplanit.output.enums.OutputType
generateAndSetId(Class<?>, IdGroupingToken) - Method in class org.goplanit.utils.id.IdAbleImpl: Convenience method to generate and set the id using a unique class identifier and idToken which in turn delegates to the IdGenerator.generateId()
generateAndSetId(IdGroupingToken) - Method in class org.goplanit.graph.GraphEntityImpl: generate id based on provided token and class and set it on this instance
generateConnectoidEdgeId(IdGroupingToken) - Static method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: Generate connectoid id
generateConnectoidSegmentId(IdGroupingToken) - Static method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: generate unique connectoid segment id
generateDetailedLinkGeometryFile - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: when set to true, a separate detailed geometry file is generated that provides the detailed geometry of each link it can be used in the VIA viewer to enhance the look of the network which otherwise only depicts the end and start node, default is false
generatedGraphId(IdGroupingToken) - Static method in class org.goplanit.graph.UntypedGraphImpl: Generate a graph id
generateDirectedConnectoidId(IdGroupingToken) - Static method in class org.goplanit.zoning.DirectedConnectoidImpl: Generate directed connectoid id
generateEventId() - Static method in class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent: Event ids are generated with unique ids across all cumulative events in the JVM
generateHashKey(long, long) - Static method in interface org.goplanit.utils.od.OdHashed: generate a hash based on origin and destination zone id
generateId() - Static method in class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: Every instance implementing this interface should generate its id using this method to ensure that we have a unique id across all break edge listeners in case they are stored in a comparable based container
generateId(Class<?>, IdGroupingToken) - Static method in interface org.goplanit.utils.id.IdAble: Convenience method to generate an id using a unique class identifier and idToken which in turn delegates to the IdGenerator.generateId()
generateId(IdGroupingToken) - Static method in class org.goplanit.mode.ModeImpl: Generate id for this instance
generateId(IdGroupingToken) - Static method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Generate an id based on token
generateId(IdGroupingToken) - Static method in class org.goplanit.network.layer.TransportLayerImpl: generate unique node id
generateId(IdGroupingToken) - Static method in class org.goplanit.path.DirectedPathImpl: Generate an id for this instance
generateId(IdGroupingToken) - Static method in class org.goplanit.service.routed.RoutedServiceImpl: Generate id for instances of this class based on the token and class identifier
generateId(IdGroupingToken) - Static method in class org.goplanit.service.routed.RoutedServicesLayerImpl: Generate id for instances of this class based on the token and class identifier
generateId(IdGroupingToken) - Static method in class org.goplanit.service.routed.RoutedTripDeparture: Generate id for instances of this class based on the token and class identifier
generateId(IdGroupingToken) - Static method in class org.goplanit.service.routed.RoutedTripImpl: Generate id for instances of this class based on the token and class identifier
generateId(IdGroupingToken) - Static method in class org.goplanit.zoning.ConnectoidImpl: Generate connectoid id
generateId(IdGroupingToken, Class<? extends Object>) - Static method in class org.goplanit.utils.id.IdGenerator: Generate a unique id for the chosen class
generateId(IdGroupingToken, Class<? extends IdAble>) - Static method in class org.goplanit.graph.GraphEntityImpl: Generate an id based on provided token and class
generateId(IdGroupingToken, Class<? extends IdAble>) - Static method in class org.goplanit.utils.id.IdAbleImpl: Generate an id based on provided token and class
generateInstanceFromXml(Class<T>, File[]) - Static method in class org.goplanit.io.xml.util.JAXBUtils: Create populated instance of class based from the first compatible potential files
generateLinkId(IdGroupingToken) - Static method in class org.goplanit.network.layer.physical.LinkImpl: generate unique link id
generateLinkSegmentId(IdGroupingToken) - Static method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Generate unique link segment id
generateNodeId(IdGroupingToken) - Static method in class org.goplanit.network.layer.physical.NodeImpl: generate unique node id
generateNodeId(IdGroupingToken) - Static method in interface org.goplanit.utils.network.layer.physical.Node: generate unique node id
generateObjectFromXml(Class<?>, File) - Static method in class org.goplanit.io.xml.util.JAXBUtils: Generates a Java object populated with the data from an XML input file.
generateOdZoneId(IdGroupingToken) - Static method in class org.goplanit.zoning.OdZoneImpl: generate unique od zone id
generateOutputFileName(String, String, String, TimePeriod, OutputType, long) - Method in class org.goplanit.output.formatter.FileOutputFormatter: Generates the name of an output file.
generateOutputFileName(String, String, String, TimePeriod, OutputType, long, int) - Method in class org.goplanit.output.formatter.FileOutputFormatter: Generates the name of an output file.
generateTransferZoneGroupId(IdGroupingToken) - Static method in class org.goplanit.zoning.TransferZoneGroupImpl: generate unique transfer zone group id
generateTransferZoneId(IdGroupingToken) - Static method in class org.goplanit.zoning.TransferZoneImpl: generate unique od zone id
generateUndirectedConnectoidId(IdGroupingToken) - Static method in class org.goplanit.zoning.UndirectedConnectoidImpl: Generate undirected connectoid id
generateXmlFileFromObject(Object, Class<?>, Path, String) - Static method in class org.goplanit.io.xml.util.JAXBUtils: Creates an XML output file populated with data from an Object
generateZoneId(IdGroupingToken) - Static method in class org.goplanit.zoning.ZoneImpl: Generate unique id for this zone
geoCalculator - Variable in class org.goplanit.utils.geo.PlanitJtsCrsUtils: geodetic calculator to use in tandem with the used CRS
geometry - Variable in class org.goplanit.zoning.ZoneImpl: geometry of this zone
geoUtils - Variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: CRS based utility class to interpret the position information of vertices
GERMANY - Static variable in class org.goplanit.utils.locale.CountryNames
GERMANY_DHDN - Static variable in class org.goplanit.utils.epsg.EpsgCodesByCountry: Area of use: Germany, 3-degree Gauss-Kruger zone 4, EPSG:31468
get(long) - Method in interface org.goplanit.utils.wrapper.LongMapWrapper: Collect entry from container using primitive
get(long) - Method in class org.goplanit.utils.wrapper.LongMapWrapperImpl: Collect entry from container using primitive
get(K) - Method in interface org.goplanit.utils.wrapper.MapWrapper: Collect entry from container
get(K) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Collect entry from container
get(GtfsKeyType) - Method in class org.goplanit.gtfs.model.GtfsObject
get(Mode) - Method in class org.goplanit.network.layers.TransportLayersImpl: Find the layer that supports the passed in mode.
get(Mode) - Method in interface org.goplanit.utils.network.layers.TransportLayers: Find the layer that supports the passed in mode.
get(Mode, TimePeriod) - Method in class org.goplanit.demands.Demands: Get an OdDemand by mode and time period in pcu/hour
get(PredefinedModeType) - Method in class org.goplanit.mode.ModesImpl: get predefined mode if it is registered
get(PredefinedModeType) - Method in interface org.goplanit.utils.mode.Modes: get predefined mode if it is registered
get(MacroscopicLinkSegment) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Collect the fundamental diagram for the given link segment.
get(MacroscopicLinkSegmentType) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Collect the fundamental diagram for the given link segment type.
getA() - Method in class org.goplanit.utils.test.TestOutputDto
getAbsCumulativeDifferenceWith(CumulativePoint) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Absolute cumulative difference between this and passed in cumulative point
getAbsCumulativeDifferenceWith(CumulativePoint) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Absolute cumulative difference between this and passed in cumulative point
getAbsTimeDifferenceWith(CumulativePoint) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Absolute time difference in seconds between this and passed in cumulative point
getAbsTimeDifferenceWith(CumulativePoint) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Absolute time difference in seconds between this and passed in cumulative point
getAcceptedTurnFlows() - Method in class org.goplanit.assignment.ltm.sltm.consumer.BushTurnFlowUpdateConsumer: The found accepted turn flows by the combined entry-exit segment hash code
getAcceptedTurnFlows() - Method in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: Access to the result, the accepted turn flows, where key comprises a combined hash of entry and exit edge segment ids and value is the accepted turn flow v_ab
getAcceptedTurnFlows() - Method in class org.goplanit.assignment.ltm.sltm.consumer.PathTurnFlowUpdateConsumer: The found accepted turn flows by the combined entry-exit segment hash code
getAccessLinkSegment() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: The edge segment that provides access
getAccessLinkSegment() - Method in class org.goplanit.zoning.DirectedConnectoidImpl: The edge segment that provides access
getAccessModes() - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: The access modes for this group
getAccessModes() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: The access modes for this group
getAccessNode() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: Based on the edge segment and the location (upstream/downstream) of the access point, collect the access node
getAccessProperties(Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Returns the mode properties for a specified mode along this link
getAccessProperties(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Returns the access properties for a specified mode along this link
getAccessVertex() - Method in interface org.goplanit.utils.zoning.Connectoid: collect the access vertex for this connectoid
getAccessVertex() - Method in class org.goplanit.zoning.DirectedConnectoidImpl: collect the access vertex for this connectoid
getAccessVertex() - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: collect the access vertex for this connectoid
getAccessZones() - Method in interface org.goplanit.utils.zoning.Connectoid: The zones that can be accessed by this connectoid
getAccessZones() - Method in class org.goplanit.zoning.ConnectoidImpl: The zones that can be accessed by this connectoid
getActivatedOutputTypeConfigurations() - Method in class org.goplanit.output.configuration.OutputConfiguration: Collect all output type configuration activated on this instance
getActivatedOutputTypes() - Method in class org.goplanit.output.configuration.OutputConfiguration: Collect the activated output types
getActivatedSolutionScheme() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Currently active sLTM solution scheme
getActiveSubOutputTypes() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Returns a set of activated sub output types (if any)
getAdditionalContent() - Method in class org.goplanit.component.event.PopulateComponentEvent: Collect additional content provided to be able to populate the component
getAdditionalContent() - Method in class org.goplanit.component.event.PopulateUntypedComponentEvent: Collect additional content provided to be able to populate the component
getAgencyId() - Method in class org.goplanit.gtfs.model.GtfsAgency: Get the agency id
getAllowedModes() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Returns the modes that are allowed on the link segment
getAllowedModes() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: return the available modes present in one of the access groups that have been registered
getAllowedModes() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Returns the modes that are allowed on the link segment
getAllowedModes() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: return the available modes present in one of the access groups that have been registered
getAllowedModesFrom(Collection<Mode>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: collect the allowed modes from the passed in modes
getAllowedModesFrom(Collection<Mode>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Method which identifies which of the passed in modes is available on the link segment
getAllowedModesNotIn(Collection<Mode>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Method which identifies which of the passed in modes is available on the link segment but not in the passed in collection of modes
getAlphaBetaParameters(Mode) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost.BPRParameters: Retrieve Pair containing alpha and beta values for a specified mode
getAlternative(boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Access to the two alternatives that reflect the PAS
getAlternativeHighCost() - Method in class org.goplanit.assignment.ltm.sltm.Pas: get cost of high cost alternative segment
getAlternativeLowCost() - Method in class org.goplanit.assignment.ltm.sltm.Pas: get cost of high cost alternative segment
getAreaBasedHighwayValueTags() - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: the area based public transport value tags that can occur i.c.w.
getAreaBasedRailwayValueTags() - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: the area based public transport tags that can occur i.c.w.
getAssignment() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmLinkOutputTypeAdapter: Access the assignment
getAssignment() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentLinkOutputTypeAdapter: Access the assignment
getAssignment() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentOdOutputTypeAdapter: Access the assignment
getAssignment() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticPathOutputTypeAdapter: Access the assignment
getAssignment() - Method in class org.goplanit.output.adapter.OutputTypeAdapterImpl: Access the assignment
getAssignmentClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Returns the name of the assignment class being used
getAssignmentId() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Collect parent assignment id
getAttributionId() - Method in class org.goplanit.gtfs.model.GtfsAttribution: Get the attribution id
getAzimuthInDegrees(Coordinate, Coordinate) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Collect the azimuth heading between the two coordinates in decimal degrees between -180 and 180, from location 1 to location 2
getB() - Method in class org.goplanit.utils.test.TestOutputDto
getBoundingBox() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: collect the network bounding box so far
getBoundingPolygon() - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set a polygon based bounding box to restrict parsing to
getBuswaySchemeKeyTags() - Static method in class org.goplanit.osm.tags.OsmBusWayTags: Collect our used busway key tags (including subtags) based on BUSWAY_SCHEME_KEYTAGS which are relevant when following the busway scheme approach
getByExternalId(String) - Method in interface org.goplanit.utils.graph.GraphEntities: Collect all entities based on a matching external id.
getBySourceId(Class<V>, K) - Method in class org.goplanit.converter.BaseReaderImpl: Get an entry by its source id
getByXmlId(String) - Method in class org.goplanit.demands.Demands.TimePeriods: Retrieve a TimePeriod by its xml Id This method is not efficient, since it loops through all the registered time periods in order to find the required time period.
getByXmlId(String) - Method in class org.goplanit.demands.Demands.TravelerTypes: Retrieve a TravelerType by its XML Id This method is not efficient, since it loops through all the registered traveler type in order to find the required entry.
getByXmlId(String) - Method in class org.goplanit.mode.ModesImpl: Retrieve a Mode by its XML Id
getByXmlId(String) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Retrieve a MacroscopicLinkSegmentType by its XML Id This method is not efficient, since it loops through all the registered types in order to find the required entry.
getByXmlId(String) - Method in class org.goplanit.network.layers.TransportLayersImpl: Find the layer based on non-indexed XML id rather than the managed internal id.
getByXmlId(String) - Method in interface org.goplanit.utils.graph.GraphEntities: Return an entity by its XML id Note: not an efficient implementation since it loops over all entities in linear time to identify the correct one, preferably use MapWrapper.get(Object) instead whenever possible.
getByXmlId(String) - Method in interface org.goplanit.utils.mode.Modes: Retrieve a Mode by its XML Id
getByXmlId(String) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypes: Return a MacroscopicLinkSegmentType by its Xml id
getByXmlId(String) - Method in interface org.goplanit.utils.network.layers.TransportLayers: Find the layer based on non-indexed XML id rather than the managed internal id.
getByXmlId(String) - Method in interface org.goplanit.utils.zoning.Zones: Find the first entry with matching XML id, not efficient as not indexed by XML id, so use carefully
getC() - Method in class org.goplanit.utils.test.TestOutputDto
getCallingClassName() - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: Collect the class name of the method that is the invoker of calling this method
getCallingMethodName() - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: Collect the method name of the method that is the invoker of calling this method
getCallingMethodType() - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: Collect the method type of the method that is the invoker of calling this method
getCapacity() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Returns the capacity of this link
getCapacityFlowPcuHour() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Provide the capacity flow rate per hour
getCapacityFlowPcuHour() - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Provide the capacity flow rate per hour
getCapacityOrDefaultPcuH() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Collect the explicitly available/set capacity in PCU/hour.
getCapacityOrDefaultPcuH() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegment: Connectoid segments are not capacity restricted by default, but can be used in conjunction with a capacitated network.
getCapacityOrDefaultPcuH() - Method in interface org.goplanit.utils.pcu.PcuCapacitated: Collect the explicitly available/set capacity in PCU/hour.
getCapacityOrDefaultPcuHLane() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Collect the explicitly available/set capacity in PCU/hour/lane.
getCapacityOrDefaultPcuHLane() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegment: see ConnectoidSegment.getCapacityOrDefaultPcuH()
getCapacityOrDefaultPcuHLane() - Method in interface org.goplanit.utils.pcu.PcuCapacitated: Collect the explicitly available/set capacity in PCU/hour/lane.
getCapacityPeriod() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getCapacityPerLanePcuHour(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Returns the value of the capacity per lane
getCapacityScalingFactors() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: Collect the computed capacity scaling factors per in-link segment a such that lambda_a = C_a/Sum_b(t_ab)
getCentroid() - Method in interface org.goplanit.utils.zoning.Zone: Returns the centroid of this zone
getCentroid() - Method in class org.goplanit.zoning.ZoneImpl: Returns the centroid of this zone
getCentroidFactory() - Method in class org.goplanit.zoning.ZoneFactoryImpl: the centroid factory to use
getCharateristicWaveSpeedKmHour() - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: The characteristic wave speed of the linear branch in km/hour
getClassName(Object) - Method in class org.goplanit.output.adapter.OutputAdapter: Return the name of a Java object class as a short string
getClassNameWithBrackets(Object) - Static method in class org.goplanit.utils.misc.LoggingUtils: create a string that gets the class simple name and surrounds them with brackets
getClassToBuild() - Method in class org.goplanit.utils.builder.Builder: collect the class to build
getClassTypeToConfigure() - Method in class org.goplanit.utils.builder.Configurator: collect the class type we are configuring for
getClosestDistanceInMeters(Point, Geometry) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest distance in meters from the point to the geometry.
getClosestDistanceInMetersMultiLineString(Point, MultiLineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest distance in meters from the point to the geometry.Here we project onto the geometry, so we find the actual closest distance instead of merely finding the closest modelled coordinated within the geometry.
getClosestDistanceInMetersToPolygon(Point, Polygon) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest distance in meters from the point to the geometry.Here we project onto the geometry, so we find the actual closest distance instead of merely finding the closest modelled coordinated within the geometry.
getClosestExistingCoordinateDistanceInMeters(Point, Geometry) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the distance between the closest coordinate on the geometry's coordinates.
getClosestExistingCoordinateToPoint(Point, Geometry) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the coordinate on the geometry with the closest distance to the reference point.
getClosestExistingLineStringCoordinateToGeometry(Geometry, T) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Find the coordinate on the line string with the closest distance to the reference referenceGeometry.
getClosestGeometryExistingCoordinateToProjectedLinearLocationOnLineString(Geometry, LineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest location from any existing coordinate of the reference geometry to the line string geometry as a linear location.
getClosestLinkWithOsmWayIdToGeometry(long, Geometry, MacroscopicNetworkLayer, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitLinkUtils: Collect the closest by link (with the given OSM way id on the layer) to the provided geometry.
getClosestPojectedCoordinateOnPolygon(Point, Polygon) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest location from the reference coordinate to the polygon expressed as a linear location.
getClosestProjectedCoordinateOnGeometry(Point, Geometry) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest projected coordinate from the reference point to the geometry.
getClosestProjectedCoordinateOnLineString(Point, LineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest projected coordinate from the reference point to the line string.
getClosestProjectedDistanceInMetersToLineString(Point, LineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest distance in meters from the point to the geometry.Here we project onto the geometry, so we find the actual closest distance instead of merely finding the closest modelled coordinated within the geometry.
getClosestProjectedLinearLocationOnGeometry(Point, Geometry) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: find the closest location from the reference point to the geometry expressed as a linear location.
getClosestProjectedLinearLocationOnLineString(Coordinate, LineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Find the closest location from the reference coordinate to the line string expressed as a linear location.
getClosestProjectedLinearLocationOnPolygon(Coordinate, Polygon) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Find the closest location from the reference coordinate to the polygon expressed as a linear location.
getClosestSamplePointOnLineString(Position, LineString) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Find the closest explicit sample point registered on the line string compared to the passed in position
getColumnPriority() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.CostTimesFlowOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.DensityOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.DestinationZoneIdOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.FlowOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.InflowOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.IterationIndexOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LengthOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.ModeExternalIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.ModeIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.ModeXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.NumberOfLanesOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.OdCostOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.OriginZoneIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.OutflowOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.OutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.PathIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.PathOutputStringProperty
getColumnPriority() - Method in class org.goplanit.output.property.RunIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getColumnPriority() - Method in class org.goplanit.output.property.TimePeriodIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
getColumnPriority() - Method in class org.goplanit.output.property.VcRatioOutputProperty: Gets the column priority of the output property in output files The lower the column priority value of a property, the further to the left it is placed in the output file
getCommaSeparator() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Separator to use for separating x,y entries of a single coordinate that is being persisted
getCompatibleAccessee() - Method in interface org.goplanit.interactor.InteractorAccessor: each interactor requires access from this accessee
getCompatibleAccessee() - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessor: each interactor requires access from this accessee
getCompatibleAccessee() - Method in interface org.goplanit.interactor.LinkVolumeAccessor: each interactor requires access from this accessee
getCompatibleAccessee() - Method in interface org.goplanit.interactor.TrafficAssignmentComponentAccessor: each interactor requires access from this accessee
getCompatibleAccessor() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: this accessee provides access to this accessor
getCompatibleAccessor() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm
getCompatibleAccessor() - Method in interface org.goplanit.interactor.InteractorAccessee: this accessee provides access to this accessor
getCompatibleAccessor() - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessee: this accessee provides access to this accessor
getCompatibleAccessor() - Method in interface org.goplanit.interactor.LinkVolumeAccessee: this accessee provides access to this accessor
getCompleteTransferZoneByOsmId(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect the complete transfer zone by entity type and osm id
getComponentToPopulate() - Method in class org.goplanit.component.event.PopulateComponentEvent: collect PLANit component to populate
getComponentToPopulate() - Method in class org.goplanit.component.event.PopulateUntypedComponentEvent: collect PLANit component to populate
getComponentType() - Method in class org.goplanit.component.PlanitComponent: Collect the component type of this instance
getConfigurator() - Method in class org.goplanit.assignment.ltm.LtmTrafficAssignmentBuilder: the configurator for this builder.
getConfigurator() - Method in class org.goplanit.assignment.TrafficAssignmentBuilder: the configurator for this builder.
getConfigurator() - Method in class org.goplanit.utils.builder.Builder: the configurator for this builder.
getCongestedBranch() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Congested branch of the FD
getCongestedBranch() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: Congested branch of the FD
getCongestedBranch() - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Congested branch of the FD
getConnectoidEdgeId() - Method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: Return the unique id of this connectoid edge
getConnectoidEdgeId() - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdge: Return the unique id of this connectoid edge
getConnectoidEdges() - Method in class org.goplanit.network.virtual.VirtualNetwork: Access to connectoid edges
getConnectoidHelper() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get the connectoid parser
getConnectoidIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for connectoids
getConnectoidsByTransferZone(TransferZone) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect transfer zone's registered connectoids
getConnectoidSegmentId() - Method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: Collect the unqiue connectoid segment id
getConnectoidSegmentId() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegment: Collect the unqiue connectoid segment id
getConnectoidSegmentIdClass() - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdge: Return class used to generate unique connectoid edge ids via the id generator
getConnectoidSegmentIdClass() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegment: Return class used to generate unique connectoid edge segment ids via the id generator
getConnectoidSegments() - Method in class org.goplanit.network.virtual.VirtualNetwork: Access to connectoid segments
getContent() - Method in class org.goplanit.utils.event.EventImpl: Access to the content for derived events
getCoordinateIndexOf(Coordinate, Coordinate[]) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: collect the index of the given coordinate from the array
getCoordinateReferenceSystem() - Method in class org.goplanit.network.TopologicalLayerNetwork: collect the used crs
getCoordinateReferenceSystem() - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: collect the crs used by this instance of the utils class
getCostToReach(Vertex) - Method in class org.goplanit.algorithms.shortestpath.MinMaxPathResultImpl: Collect the cost to reach the given vertex
getCostToReach(Vertex) - Method in interface org.goplanit.algorithms.shortestpath.ShortestPathResult: Collect the cost to reach the given vertex
getCostToReach(Vertex) - Method in class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: Collect the cost to reach the given vertex
getCountry() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Collect country name used
getCountry() - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Collect the country name set
getCountry() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaults: The country for which these defaults hold.
getCountry() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: The country for which these defaults hold.
getCountry() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: collect the country name
getCountry() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: collect the country name
getCountryName() - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: the country name of the network to write (if any is set)
getCountryName() - Method in class org.goplanit.osm.converter.OsmReaderSettings: The country name used to initialise OSM defaults for
getCountryName() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderData: collect the country name
getCountryNameCodeByIso2Code(String) - Static method in class org.goplanit.utils.locale.LocaleUtils: Collect full name of country based on ISO2 code
getCreatedPlanitNodesByLocation() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: provide read access to the registered PLANit nodes (and original OSM node if any was used) by location
getCriticalSpeedKmH() - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Collect the critical speed in km/h
getCriticalSpeedKmH() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Collect the critical speed in km/h
getCriticalSpeedKmH(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Collect the critical speed based on the combination of the mode and any restrictions imposed by the type on this mode.
getCriticalSpeedOrDefaultKmH(double) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Collect the critical speed set, or otherwise the provided default
getCsvFileName(OutputType) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Returns the list of names of CSV output file for a specified output type
getCsvFileName(OutputType) - Method in interface org.goplanit.output.formatter.CsvTextFileOutputFormatter: Returns a list of names of CSV output file for a specified output type
getCsvFileName(OutputType) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Returns the name of the CSV output file for a specified output type
getCumulativeCount() - Method in interface org.goplanit.utils.cumulatives.CumulativePoint
getCumulativeCount() - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl
getCumulativePoint() - Method in class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent
getCurrentDestination() - Method in interface org.goplanit.utils.od.OdDataIterator: Returns the destination zone object for the current cell
getCurrentDestination() - Method in class org.goplanit.utils.od.OdHashedIterator: Returns the destination zone object for the current cell
getCurrentDestination() - Method in class org.goplanit.utils.od.OdMatrixIterator: Returns the destination zone object for the current cell
getCurrentFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the current flow acceptance factors
getCurrentFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Access to most recent flow acceptance factors (alphas)
getCurrentFlowCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the current flow capacity factors
getCurrentInflowsPcuH() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Collect the most recently calculate total inflows by the loading
getCurrentOrigin() - Method in interface org.goplanit.utils.od.OdDataIterator: Returns the origin zone object for the current cell
getCurrentOrigin() - Method in class org.goplanit.utils.od.OdHashedIterator: Returns the origin zone object for the current cell
getCurrentOrigin() - Method in class org.goplanit.utils.od.OdMatrixIterator: Returns the origin zone object for the current cell
getCurrentOutflowsPcuH() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Collect the most recently calculate total outflows by the loading
getCurrentReceivingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: collect current receiving flows
getCurrentSegmentFlows() - Method in class org.goplanit.assignment.traditionalstatic.ModeData: collect current segment flows
getCurrentSendingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: collect current sending flows
getCurrentStorageCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the current storage capacity factors
getCurrentValue() - Method in interface org.goplanit.utils.od.OdDataIterator: Returns the value at the current cell
getCurrentValue() - Method in class org.goplanit.utils.od.OdHashedIterator: Returns the value at the current cell
getCurrentValue() - Method in class org.goplanit.utils.od.OdNonPrimitiveMatrixIterator: Returns the value at the current cell
getCurrentValue() - Method in class org.goplanit.utils.od.OdPrimitiveMatrixIterator: Returns the value at the current cell
getCycleWayKeyTags(boolean) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Collect basic cycleway key tags based on BASIC_CYCLEWAY_KEY_TAGS, when includeLocationSubKey is true, we also include the subtags left and right consistent with BASIC_AND_LOCATION_BASED_KEY_TAGS
getCycleWayOneWayLocationBasedKeyTags() - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Collect our used cycleway key tags (including subtags) based on ONEWAY_LOCATION_BASED_CYCLEWAY_KEY_TAGS
getCycleWayPositiveOppositeDirectionValueTags() - Static method in class org.goplanit.osm.tags.OsmBicycleTags: collect all value tags that are deemed to represent the existence of a cycleway in the opposite direction of travel in case of a one way street.
getCycleWayRegularNegativeValueTags() - Static method in class org.goplanit.osm.tags.OsmBicycleTags: collect all value tags that are deemed to explicitly not represent a cycleway, based on CYCLEWAY_REGULAR_NEGATIVE_VALUE_TAGS protected member
getCycleWayRegularPositiveValueTags() - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Collect all value tags that are deemed to represent a cycleway in the main direction(s) of travel, based on CYCLEWAY_VALUE_TAGS_MAIN_DIRECTION protected member
getDataType() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.CostTimesFlowOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.DensityOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.DestinationZoneIdOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
getDataType() - Method in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.FlowOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.InflowOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.IterationIndexOutputProperty
getDataType() - Method in class org.goplanit.output.property.LengthOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.LinkSegmentIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
getDataType() - Method in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.ModeExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.ModeIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.ModeXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.NumberOfLanesOutputProperty
getDataType() - Method in class org.goplanit.output.property.OdCostOutputProperty
getDataType() - Method in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.OriginZoneIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.OutflowOutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.OutputProperty: Returns the data type of the output property
getDataType() - Method in class org.goplanit.output.property.PathIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.PathOutputStringProperty
getDataType() - Method in class org.goplanit.output.property.RunIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.TimePeriodIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
getDataType() - Method in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
getDataType() - Method in class org.goplanit.output.property.VcRatioOutputProperty: Returns the data type of the output property
getDecimalFormat() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Collect number of decimals used in writing coordinates
getDecimalFormat() - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Collect number of decimals used in writing coordinates
getDecimalSeparator() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Separator to use for separating decimals from unit changes
getDefaultDirectionalLanesByHighwayType(String) - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: collect the number of lanes based on the highway type, e.g.
getDefaultDirectionalLanesByWayType(String, String) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Collect the number of lanes/tracks for a given OSM way key/value for either direction (not total), e.g.
getDefaultDirectionalLanesByWayType(String, String) - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: collect the number of lanes based on the highway type, e.g.
getDefaultDirectionalRailwayTracks() - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: collect the default number of tracks for railways (in one direction)
getDefaultDwellTime() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Get default
getDefaultLinkSegmentTypeByOsmTag(String) - Method in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Find the link segment type (per layer) by the Highway=value, where we pass in the "value"
getDefaultLinkSegmentTypeByOsmWayType(OsmWay, Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: Collect the default settings for this way based on its highway type
getDefaultMaximumSpeed() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getDefaultOsmHighwayTypeWhenUnsupported() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: When the parsed way has a type that is not supported but also not explicitly excluded, this alternative will be used
getDefaultOutputFormatter() - Method in class org.goplanit.io.project.PlanItSimpleProject: Collect the default output formatter for PLANit simple project which is the native XMLFormatter
getDefaultPredefinedModeMappings(PredefinedModeType) - Static method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Collect the default mapping from PLANit predefined mode to MATSim mode
getDefaultsByCountryISO2(String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: collect the (original) speed limit defaults (outside,inside urban areas) for a given country ISO2 code
getDefaultsByCountryName(String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: collect the (original) speed limit defaults (outside,inside urban areas) for a given country name
getDefaultSpeedLimitByOsmHighwayType(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Collect the speed limit for a given highway tag value, e.g.
getDefaultSpeedLimitByOsmHighwayType(Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Collect the default speed limit for a given highway tag value, where we extract the key and value from the passed in tags, if available
getDefaultSpeedLimitByOsmRailwayType(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Collect the speed limit for a given railway tag value, e.g.
getDefaultSpeedLimitByOsmRailwayType(Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Collect the default speed limit for a given railway tag value, where we extract the key and value from the passed in tags, if available
getDefaultSpeedLimitByOsmWayType(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Collect the speed limit for a given railway tag value, e.g.
getDefaultSpeedLimitByOsmWayType(String, Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Collect the default speed limit for a given way tag value, where we extract the key and value from the passed in tags, if available
getDefaultSpeedLimitByOsmWayType(Map<String, String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Collect the default speed limit for a given highway or railway tag value, where we extract the key and value from the passed in tags, if available
getDefaultTotalLanesByHighwayType(String) - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: collect the number of lanes based on the highway type, e.g.
getDefaultUnit() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.CostTimesFlowOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.DensityOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.DestinationZoneIdOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.FlowOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.InflowOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.IterationIndexOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LengthOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.ModeExternalIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.ModeIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.ModeXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.NumberOfLanesOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.OdCostOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.OriginZoneIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.OutflowOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.OutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.PathIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.PathOutputStringProperty
getDefaultUnit() - Method in class org.goplanit.output.property.RunIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty: Returns the units of the output property
getDefaultUnit() - Method in class org.goplanit.output.property.TimePeriodIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
getDefaultUnit() - Method in class org.goplanit.output.property.VcRatioOutputProperty: Returns the units of the output property
getDemands() - Method in class org.goplanit.assignment.TrafficAssignment: Get the demands for the current assignment
getDemands() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: collect the registered demands
getDemands() - Method in class org.goplanit.io.project.PlanItSimpleProject: Return the current Demands object
getDemandsToPopulate() - Method in class org.goplanit.component.event.PopulateDemandsEvent: Collect PLANit demands to populate
getDemandsToPopulate() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings
getDenominatorUnitTypes() - Method in class org.goplanit.utils.unit.GroupUnit: All registered units in the denominator
getDensityPcuKm(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The flow at a given density
getDensityPcuKm(double) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: The flow at a given density
getDensityTangent(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The derivative of density towards a change in flow given a particular density
getDepartures() - Method in interface org.goplanit.service.routed.RoutedTripSchedule: Access to the departures of this schedule
getDepartures() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Access to the departures of this schedule
getDescription() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Description of the chosen sLTM strategy for equilibration
getDescription() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: Description of the chosen sLTM strategy for equilibration
getDescription() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: Description of the chosen sLTM strategy for equilibration
getDescription() - Static method in class org.goplanit.io.xml.util.ApplicationProperties: collect description value
getDescription() - Method in class org.goplanit.time.TimePeriodImpl: Return the description
getDescription() - Method in interface org.goplanit.utils.time.TimePeriod: Return the description
getDestinationCoordinateReferenceSystem() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Collect the destination Crs
getDestinationCoordinateReferenceSystem() - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Collect the currently used CRS for writing the output geometries
getDestinationCrsTransformer() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get the destination crs transformer.
getDestinationZoneExternalId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the external Id of the destination zone for the current OD
getDestinationZoneExternalId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the external Id of the destination zone for the current cell in the OD path matrix
getDestinationZoneId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the Id of the destination zone for the current cell in the OD destination
getDestinationZoneId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the Id of the destination zone for the current cell in the OD path matrix
getDestinationZoneXmlId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the XML Id of the destination zone for the current OD destination
getDestinationZoneXmlId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the Xml Id of the destination zone for the current cell in the OD path matrix
getDirectedConnectoidId() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: Collect the directed connectoid id
getDirectedConnectoidId() - Method in class org.goplanit.zoning.DirectedConnectoidImpl: the directed connectoid unique id
getDirectedConnectoidIdClass() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: the class for directed connectoid id generation
getDirectedConnectoidsByLocation(MacroscopicNetworkLayer) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: collect the registered connectoids indexed by their locations for a given network layer (unmodifiable)
getDirectedConnectoidsByLocation(Point, MacroscopicNetworkLayer) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect the registered connectoids by given locations and network layer (unmodifiable)
getDirectedVertexIterator() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect iterator for all unique directed vertices in the bush
getDisallowedModesFrom(Collection<Mode>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Method which identifies which of the passed in modes is unavailable on the link segment
getDiscardDanglingNetworkAboveSize() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: collect the size below which networks are removed
getDiscardDanglingNetworkBelowSize() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: collect the size above which dangling networks are kept even if they are smaller than the largest connected network
getDistanceInKilometres(Vertex, Vertex) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Compute the distance in kilometres between two vertices assuming the positions are set and based on the same crs as registered on this class instance
getDistanceInKilometres(Vertex, Vertex) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Compute the distance in kilometres between two vertices assuming the positions are set and based on the same crs as registered on this class instance
getDistanceInKilometres(LineString) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Compute the length of the line string by traversing all nodes and computing the segment by segment distances TODO: find out if a faster way is possible
getDistanceInKilometres(Point, Point) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Compute the distance in kilometres between two positions assuming the positions are provided in the same crs as registered on this class instance
getDistanceInKilometres(LineString) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Compute the length of the line string by traversing all nodes and computing the segment by segment distances TODO: find out if a faster way is possible
getDistanceInKilometres(Position, Position) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Compute the distance in kilometres between two positions assuming the positions are provided in the same crs as registered on this class instance
getDistanceInMetres(Coordinate, Coordinate) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Compute the distance in metres between two (JTS) coordinates assuming the positions are provided in the same crs as registered on this class instance
getDistanceInMetres(Point, Point) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Compute the distance in metres between two (JTS) points assuming the positions are provided in the same crs as registered on this class instance
getDistanceInMetres(Position, Position) - Method in class org.goplanit.io.geo.PlanitOpenGisUtils: Compute the distance in metres between two positions assuming the positions are provided in the same crs as registered on this class instance
getDistanceToZone(OsmNode, Zone, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmNodeUtils: find the distance from the zone to the node.
getDivergeVertex() - Method in class org.goplanit.assignment.ltm.sltm.Pas: Collect the start vertex of the PAS
getDownstreamNode() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Collect downstream vertex as node
getDownstreamNodeExternalId(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Returns the external Id of the downstream node
getDownstreamNodeExternalId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the external Id of the downstream node
getDownstreamNodeId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the Id of the downstream node
getDownstreamNodeLocation(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the location of the downstream node
getDownstreamNodeXmlId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the XML Id of the downstream node
getDownstreamVertex() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Get the segment's downstream vertex
getDownstreamVertex() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Get the segment's downstream vertex
getDownstreamVertex() - Method in interface org.goplanit.utils.graph.EdgeSegment: Get the segment's downstream vertex
getDownstreamVertex() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Get the segment's downstream vertex
getDTravelTimeDFlow(boolean, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Get the first derivative of the used travel time computation method towards the edge segment (in) flow rate in PCU per hour, i.e.
getDTravelTimeDFlow(boolean, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Derivative of free flow travel time is zero
getDTravelTimeDFlow(boolean, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Not supported returns -infinity for all calls and logs severe warning
getDTravelTimeDFlow(boolean, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Not supported returns -infinity for all calls and logs severe warning
getDTravelTimeDFlow(boolean, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: First Derivative towards inflowRate.
getDTravelTimeDFlow(boolean, Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: fixed cost so derivative is always zero
getDTravelTimeDFlow(boolean, Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Fixed, so derivative is always zero
getDTravelTimeDFlow(boolean, Mode, T) - Method in interface org.goplanit.cost.Cost: Get the first derivative of the used travel time computation method towards the edge segment (in) flow rate in PCU per hour, i.e.
getDuration() - Method in class org.goplanit.service.routed.RelativeLegTiming: Collect duration
getDurationSeconds() - Method in class org.goplanit.time.TimePeriodImpl: Return the duration in seconds
getDurationSeconds() - Method in interface org.goplanit.utils.time.TimePeriod: Return the duration in seconds
getDwellTime() - Method in class org.goplanit.service.routed.RelativeLegTiming: Collect dwell time
getEarliestNonNull() - Method in class org.goplanit.utils.misc.Pair
getEdgeFromBreakToVertexB() - Method in class org.goplanit.graph.modifier.event.BreakEdgeEvent: collect broken edge section from break vertex to original vertex B
getEdgeFromVertexAToBreak() - Method in class org.goplanit.graph.modifier.event.BreakEdgeEvent: collect broken edge section from original vertex A to break vertex
getEdges() - Method in class org.goplanit.graph.UntypedGraphImpl: collect edges of graph
getEdges() - Method in class org.goplanit.graph.VertexImpl: Returns a collection of Edge objects (unmodifiable)
getEdges() - Method in interface org.goplanit.utils.graph.UntypedGraph: collect edges of graph
getEdges() - Method in interface org.goplanit.utils.graph.Vertex: Returns a collection of Edge objects (unmodifiable)
getEdges(Vertex) - Method in interface org.goplanit.utils.graph.Vertex: Collect the edge(s) based on the other vertex
getEdgeSegment(boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Edge segment in the direction indicated
getEdgeSegment(DirectedVertex) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: collect the first edge segment corresponding to the provided other vertex
getEdgeSegmentAb() - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Edge segment in the direction from A to B
getEdgeSegmentAb() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Edge segment in the direction from A to B
getEdgeSegmentBa() - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Edge segment in the direction from B to A
getEdgeSegmentBa() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Edge segment in the direction from B to A
getEdgeSegmentPathString(DirectedPath, Function<EdgeSegment, Object>) - Static method in class org.goplanit.utils.path.PathUtils: Returns the path as a String of comma-separated edge segment Id or external Id values
getEdgeSegments() - Method in class org.goplanit.graph.directed.UntypedDirectedGraphImpl: Collect edges segments of graph
getEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: collect all edge segments available on the edge
getEdgeSegments() - Method in interface org.goplanit.utils.graph.UntypedDirectedGraph: Collect edges segments of graph
getEligibleLanesModeSchemeHelperModes(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: collect activated modes that can be identified via the lanes:<mode> tagging scheme are currently supported.
getEligibleModeLanesSchemeHelperModes(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: collect activated modes(and their mode categories) that can be identified via the <mode>:lanes tagging scheme are currently supported.
getEligibleTaggingSchemeHelperModes(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: collect activated modes that are utilised via all derived tagging schemes.
getEndNodeId() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Return the id of the end node
getEntityType(OsmEntity) - Static method in class org.goplanit.osm.util.Osm4JUtils: Collect entity type based on the entity
getEntryEdgeSegments() - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Collect the entry edge segments of this vertex (unmodifiable)
getEntryEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Collect the entry edge segments of this vertex (unmodifiable)
getEntryLegSegments() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Identical to DirectedVertex.getEntryEdgeSegments()
getEntryLinkSegments() - Method in interface org.goplanit.utils.network.layer.physical.Node: It is expected that nodes are used in conjunction with link segments.
getEnvelope() - Method in interface org.goplanit.utils.zoning.Zone: collect the envelope (bounding box) of this zone's geometry.
getEpsg(String) - Static method in class org.goplanit.utils.epsg.EpsgCodesByCountry: collect the epsg most likely applicable code based on the country name.
getEpsilon() - Method in class org.goplanit.gap.StopCriterion: Return the epsilon of this stopping criterion
getEpsilon() - Method in class org.goplanit.gap.StopCriterionConfigurator: Return the epsilon of this stopping criterion
getEventContentByIndex(int) - Method in class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent: Collect any entry from the event content object array by index and cast to generic type T
getEventTypesWithListeners() - Method in class org.goplanit.utils.event.EventProducerImpl: Determine the event types have one or more listeners registered
getExcludedColumns() - Method in class org.goplanit.gtfs.reader.GtfsFileReaderSettings: the excluded columns (unmodifiable)
getExitEdgeSegments() - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Collect the exit edge segments of this vertex (unmodifiable)
getExitEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Collect the exit edge segments of this vertex (unmodifiable)
getExitLegSegments() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Identical to DirectedVertex.getExitEdgeSegments()
getExitLinkSegments() - Method in interface org.goplanit.utils.network.layer.physical.Node: It is expected that nodes are used in conjunction with link segments.
getExplicitCapacityPerLane() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Return the explicitly set capacity per lane of this macroscopic link segment type.
getExplicitCapacityPerLane() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Return the explicitly set capacity per lane of this macroscopic link segment type.
getExplicitCapacityPerLaneOrDefault() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Return the explicitly defined capacity per lane of this macroscopic link segment type or the default if it has not been explicitly set
getExplicitlyAllowedModes(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: collect modes that are explicitly allowed for this zone (unmodifiable).
getExplicitlyAllowedModes(Zone) - Method in class org.goplanit.zoning.ConnectoidImpl: collect modes that are explicitly allowed for this zone (unmodifiable).
getExplicitlyExcludedModes(Map<String, String>, boolean, OsmNetworkReaderSettings) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerModeParser: Collect explicitly excluded modes from the passed in tags.
getExplicitlyIncludedModes(Map<String, String>, boolean, OsmNetworkReaderSettings) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerModeParser: Collect explicitly included modes from the passed in tags.
getExplicitMaximumDensityPerLane() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Return the maximum density per lane for this macroscopic link segment type.
getExplicitMaximumDensityPerLane() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Return the maximum density per lane for this macroscopic link segment type.
getExplicitMaximumDensityPerLaneOrDefault() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Return the maximum density per lane of this macroscopic link segment type or the default if it has not been explicitly set
getExtension(File) - Static method in class org.goplanit.utils.misc.FileUtils: Collect the extension of a file.
getExternalId() - Method in class org.goplanit.component.PlanitComponent: get external id of the entity
getExternalId() - Method in interface org.goplanit.utils.id.ExternalIdAble: get external id of the entity
getExternalId() - Method in class org.goplanit.utils.id.ExternalIdAbleImpl: get external id of the entity
getFactory() - Method in class org.goplanit.graph.directed.DirectedEdgesImpl: Collect the directed edge factory to use for creating instances
getFactory() - Method in class org.goplanit.graph.directed.DirectedVerticesImpl: Collect the vertex factory to use for creating instances
getFactory() - Method in class org.goplanit.graph.directed.EdgeSegmentsImpl: Collect the edge segment factory to use for creating instances
getFactory() - Method in class org.goplanit.graph.EdgesImpl: Collect the edge factory to use for creating instances
getFactory() - Method in class org.goplanit.graph.VerticesImpl: Collect the vertex factory to use for creating instances
getFactory() - Method in class org.goplanit.mode.ModesImpl: Collect the mode factory to use for creating instances
getFactory() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentsImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Collect factory for creating (and registering on this container) of macroscopic link segment types
getFactory() - Method in class org.goplanit.network.layer.physical.LinkSegmentsImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.physical.LinksImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.physical.NodesImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.service.ServiceLegSegmentsImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.service.ServiceLegsImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layer.service.ServiceNodesImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.layers.MacroscopicNetworkLayersImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.network.layers.ServiceNetworkLayersImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.network.virtual.ConnectoidEdgesImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Factory to create instance of graph entity (for this container class)
getFactory() - Method in class org.goplanit.path.DirectedPathsImpl: Factory to create paths on this container
getFactory() - Method in interface org.goplanit.service.routed.RoutedModeServices: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedModeServicesImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.service.routed.RoutedServicesLayers: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedServicesLayersImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.service.routed.RoutedTripDepartures: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedTripDeparturesImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.service.routed.RoutedTrips: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.service.routed.RoutedTripsFrequency: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedTripsFrequencyImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedTripsImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.service.routed.RoutedTripsSchedule: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.service.routed.RoutedTripsScheduleImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.graph.directed.DirectedEdges: Collect the directed edge factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.graph.directed.DirectedVertices: Collect the vertex factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.graph.directed.EdgeSegments: Collect the edge segment factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.graph.Edges: Collect the edge factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.graph.GraphEntities: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.graph.Vertices: Collect the vertex factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.id.ManagedIdEntities: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.mode.Modes: Collect the mode factory to use for creating instances
getFactory() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegments: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypes: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.physical.Links: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegments: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.physical.Nodes: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.service.ServiceLegs: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.service.ServiceLegSegments: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layer.service.ServiceNodes: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layers.MacroscopicNetworkLayers: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.layers.ServiceNetworkLayers: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdges: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegments: Factory to create instance of graph entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.path.DirectedPaths: Factory to create paths on this container
getFactory() - Method in interface org.goplanit.utils.zoning.DirectedConnectoids: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.zoning.OdZones: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.zoning.TransferZoneGroups: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.zoning.TransferZones: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in interface org.goplanit.utils.zoning.UndirectedConnectoids: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.zoning.DirectedConnectoidsImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.zoning.OdZonesImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.zoning.TransferZoneGroupsImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.zoning.TransferZonesImpl: Factory to create instance of managed id entity (for this container class)
getFactory() - Method in class org.goplanit.zoning.UndirectedConnectoidsImpl: Factory to create instance of managed id entity (for this container class)
getFileName() - Method in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Collect fileName of the file containing the actual initial costs to use to populate this instance
getFileName() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Collect the file name to use
getFileNameWithoutExtension(String) - Static method in class org.goplanit.utils.misc.FileUtils: Extract the file name without the extension, i.e.
getFileScheme() - Method in class org.goplanit.gtfs.handler.GtfsFileHandler: File scheme supported by this handler
getFileScheme() - Method in class org.goplanit.gtfs.reader.GtfsFileReaderBase: The file scheme of this reader indicating what file it is operating on
getFilesWithExtensionFromDir(String, String) - Static method in class org.goplanit.utils.misc.FileUtils: Collect all files from a directory with the given extension
getFileType() - Method in class org.goplanit.gtfs.scheme.GtfsFileScheme
getFirst() - Method in class org.goplanit.project.ProjectAssignmentBuilders: Collect the first traffic assignment that is registered (if any).
getFirst() - Method in interface org.goplanit.utils.wrapper.MapWrapper: collect the first entry based on the iterator's result, which is not necessarily the fist entry ordered by the key, it is just the first entry the iterator would provide
getFirst() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Collect first transfer zone that would be returned by the iterator
getFirstAccessZone() - Method in interface org.goplanit.utils.zoning.Connectoid: first available zone that is accessible based on the first entry the iterator returns
getFirstAccessZone() - Method in class org.goplanit.zoning.ConnectoidImpl: first available zone that is accessible based on the first entry the iterator returns
getFirstEdgeSegment(boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Collect the first edge segment of one of the two segments
getFirstEntryLegSegment() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Collect the first available entry leg segment using the iterator internally.
getFirstEntryLinkSegment() - Method in interface org.goplanit.utils.network.layer.physical.Node: Collect the first available entry link segment using the iterator internally.
getFirstExitLegSegment() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Collect the first available exit link segment using the iterator internally.
getFirstExitLinkSegment() - Method in interface org.goplanit.utils.network.layer.physical.Node: Collect the first available exit link segment using the iterator internally.
getFirstLegSegment() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Get first leg segment of the routed trip
getFirstOdPathMatrix() - Method in class org.goplanit.path.OdPathSets: Collect the first od path matrix available
getFirstParameterOfDelayedMethodCall(String) - Method in class org.goplanit.utils.builder.Configurator: Collect the first parameter submitted with (last) registered delayed method call of given signature.
getFirstParentLink() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: Collect the first parent link
getFirstStackFrame() - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: Collect the first available stack frame if it exists
getFirstSupportedMode() - Method in interface org.goplanit.utils.network.layer.TransportLayer: Collect the first mode found under the supported modes from the collection provided by getSupportedModes
getFixedInput() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: Provide access to the fixed input
getFlowPcuHour(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The flow at a given density
getFlowPcuHour(double) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: The flow at a given density
getFlowTangent(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The derivative of flow towards a change in density given a particualr flow
getFlowTangent(double) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: The derivative of flow towards a change in density given a particualr flow
getFreeFlowBranch() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Free flow branch of the FD
getFreeFlowBranch() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: Free flow branch of the FD
getFreeFlowBranch() - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Free flow branch of the FD
getFreeFlowTravelTimeHourPerLinkSegment(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegments: Create a raw array of all free flow travel times of the registered macroscopic link segments where the index in the array corresponds to the link segment id (not id).
getFrequencyBasedTrips() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Trips for a service can be frequency or schedule based, or have both.
getFrequencyBasedTrips() - Method in class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Trips for a service can be frequency or schedule based, or have both.
getFrequencyPerHour() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Collect frequency per hour for this trip
getFrequencyPerHour() - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Collect frequency per hour for this trip
getFundamentalDiagram() - Method in class org.goplanit.assignment.ltm.LtmConfigurator: Collect the fundamental diagram configurator
getFundamentalDiagramToPopulate() - Method in class org.goplanit.component.event.PopulateFundamentalDiagramEvent: collect fundamental diagram component to populate
getGap() - Method in class org.goplanit.gap.GapFunction: Returns the last computed gap
getGap() - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Returns the last computed gap
getGap() - Method in class org.goplanit.gap.NormBasedGapFunction: Returns the last computed gap
getGapFunction() - Method in class org.goplanit.assignment.TrafficAssignment: Collect the gap function which is to be set by a derived class of TrafficAssignment via the initialiseDefaults() right after construction
getGapFunction() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Collect the gap function of the trafficAssignment instance
getGapFunctionClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Return the name of the gap function class
getGapFunctionToPopulate() - Method in class org.goplanit.component.event.PopulateGapFunctionEvent: collect gap function to populate
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Return the travel time for the current link for a given mode If the input data are invalid, this method returns a negative value.
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Return the free flow travel time for the current link for a given mode If the input data are invalid, this method returns a negative value.
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Returns the initial cost for each link segment and mode for time period agnostic registrations.
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Returns the initial cost for each link segment and mode.
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: get the initial cost for a specified mode and link segment
getGeneralisedCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Return the average travel time for the current link segment for a given mode
getGeneralisedCost(Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getGeneralisedCost(Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Return the connectoid travel time using speed
getGeneralisedCost(Mode, T) - Method in interface org.goplanit.cost.Cost: Returns the generalised cost of travel along an edge segment for a specified mode
getGeometry() - Method in class org.goplanit.graph.EdgeImpl: Collect the geometry of this line
getGeometry() - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Not allowed, collect geometry via underlying links instead
getGeometry() - Method in interface org.goplanit.utils.graph.Edge: Collect the geometry of this line
getGeometry() - Method in interface org.goplanit.utils.zoning.Zone: Collect the geometry (outer border) of this zone
getGeometry() - Method in class org.goplanit.zoning.ZoneImpl: Collect the geometry (outer border) of this zone
getGeometry(T) - Method in class org.goplanit.utils.geo.PlanitJtsIntersectEdgeVisitor: The implementing class is expected to provide the envelope for the entity
getGeometry(T) - Method in class org.goplanit.utils.geo.PlanitJtsIntersectZoneVisitor: The implementing class is expected to provide the envelope for the entity
getGeometry(T) - Method in class org.goplanit.utils.geo.PlanitJtsItemVisitor: The implementing class is expected to provide the envelope for the entity
getGeoUtils() - Method in class org.goplanit.io.converter.PlanitWriterImpl: geo util class based on source Crs (if any)
getGeoUtils() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get geo utils
getGlobalNonUrbanHighwayDefaults() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: collect the (original) highway-non-urban speed limit defaults
getGlobalRailwayDefaults() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: collect the (original) railway speed limit defaults
getGlobalUrbanHighwayDefaults() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: collect the (original) highway-urban speed limit defaults
getGraph() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: collect the graph
getGraphEntities() - Method in class org.goplanit.graph.GraphEntityFactoryImpl: The entities to register on
getGraphIdGroupingToken() - Method in class org.goplanit.graph.UntypedGraphImpl: Collect the id grouping token used for all entities registered on the graph, i.e., this graph specific identifier for generating ids unique and contiguous within this network and this network only
getGroup() - Method in enum org.goplanit.utils.unit.UnitType
getGroupIdToken() - Method in class org.goplanit.component.PlanitComponentBuilder: collect the group id token
getHighwayModeAccessDefaults() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaults: collect the defaults specifically for highways
getHighwaySettings() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: provide highway specific settings
getHighwayValueTags() - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: collect all known highway value tags that are non-way related
getId() - Method in class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent
getId() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect id of the entity
getId() - Method in class org.goplanit.component.PlanitComponent: Collect id of the entity
getId() - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Collect id of the entity
getId() - Method in class org.goplanit.output.formatter.BaseOutputFormatter
getId() - Method in interface org.goplanit.output.formatter.OutputFormatter: Collect the id of the formatter
getId() - Method in interface org.goplanit.utils.id.IdAble: Collect id of the entity
getId() - Method in class org.goplanit.utils.id.IdAbleImpl: Collect id of the entity
getIdClass() - Method in class org.goplanit.graph.UntypedGraphImpl: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.service.routed.RoutedService: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.service.routed.RoutedServicesLayer: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.service.routed.RoutedTrip: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in class org.goplanit.service.routed.RoutedTripDeparture: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.graph.Edge: All edges use the EDGE_ID_CLASS to generate the unique internal ids
getIdClass() - Method in interface org.goplanit.utils.graph.EdgeSegment: All edges use the EDGE_SEGMENT_ID_CLASS to generate the unique internal ids
getIdClass() - Method in interface org.goplanit.utils.graph.Vertex: All vertices use the VERTEX_ID_CLASS to generate the unique internal ids
getIdClass() - Method in interface org.goplanit.utils.id.ManagedId: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.mode.Mode: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.network.layer.TransportLayer: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.path.DirectedPath: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.zoning.Connectoid: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Each managed id class is expected to generate its ids based on its class signature.
getIdClass() - Method in interface org.goplanit.utils.zoning.Zone: Each managed id class is expected to generate its ids based on its class signature.
getIdGroupingToken() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Token to use
getIdGroupingToken() - Method in class org.goplanit.component.PlanitComponent: Collect the id grouping token used to generate ids for entities of this class.
getIdGroupingToken() - Method in interface org.goplanit.utils.id.ManagedIdEntityFactory: Collect the id grouping token used by this factory
getIdGroupingToken() - Method in class org.goplanit.utils.id.ManagedIdEntityFactoryImpl: Collect the id grouping token used by this factory
getIdMapperType() - Method in class org.goplanit.converter.BaseWriterImpl: collect the way the ids should be mapped
getIdMapperType() - Method in interface org.goplanit.converter.ConverterWriter: collect the way the ids should be mapped
getIdMapperType() - Method in interface org.goplanit.converter.MultiConverterWriter: collect the way the ids should be mapped
getIdMapperType() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: collect the way the ids should be mapped
getIdMapperType() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriter: collect the way the ids should be mapped
getIdToken() - Method in class org.goplanit.network.layers.TransportLayersImpl: Collect the token for id generation
getIncomingEdgeSegmentForVertex(Vertex) - Method in class org.goplanit.algorithms.shortestpath.MinMaxPathResultImpl: Find the incoming edge segment for a given vertex
getIncomingEdgeSegmentForVertex(Vertex) - Method in interface org.goplanit.algorithms.shortestpath.ShortestPathResult: Find the incoming edge segment for a given vertex
getIncomingEdgeSegmentForVertex(Vertex) - Method in class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: Find the incoming edge segment for a given vertex
getIncompleteTransferZoneByOsmId(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect the potentially incomplete transfer zone by entity type and osm id
getInflows() - Method in class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: access to the tracked inflows
getInfrastructureLayerIdForMode(Mode) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: collect the infrastructure layer id this mode resides on
getInfrastructureLayerIdForMode(Mode) - Method in class org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapterImpl: collect the infrastructure layer id this mode resides on
getInfrastructureNetwork() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Get the physical network for the current assignment
getInfrastructureNetwork() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: The physical network used
getInfrastructureNetwork() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Get the physical network for the current assignment
getInfrastructureNetwork() - Method in class org.goplanit.assignment.TrafficAssignment: Get the physical network for the current assignment
getInfrastructureNetwork() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: collect the registered network
getInfrastructureNetwork() - Method in class org.goplanit.network.transport.TransportModelNetwork: Collect the physical network component of the transport network
getInitialLinkSegmentCost(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.CustomPlanItProject: Return the initial link segment costs for a network
getInitialLinkSegmentCost(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.project.PlanItProjectInput: Return the initial link segment costs for a network
getInitialLinkSegmentCostToPopulate() - Method in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Collect PLANit initial cost component to populate
getInputBuilderListener() - Method in class org.goplanit.component.PlanitComponentBuilder: collect the input builder
getInputDirectory() - Method in class org.goplanit.io.xml.util.PlanitXmlReaderSettings: The input path directory used
getInputProperty(String) - Method in class org.goplanit.graph.EdgeImpl: Get input property by its key
getInputProperty(String) - Method in class org.goplanit.graph.VertexImpl: collect a property
getInputProperty(String) - Method in interface org.goplanit.utils.graph.Edge: Get input property by its key
getInputProperty(String) - Method in interface org.goplanit.utils.graph.Vertex: collect a property
getInputProperty(String) - Method in interface org.goplanit.utils.zoning.Zone: collect a property
getInputProperty(String) - Method in class org.goplanit.zoning.ZoneImpl: collect a property
getInputs() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Provide access to the inputs used
getInputSource() - Method in class org.goplanit.osm.converter.OsmReaderSettings: The input source used
getInstance(boolean, IterableMap<Object, Object[]>, MultiKeyMap<Object, Object[]>) - Static method in interface org.goplanit.data.MultiKeyPlanItDataIterator: Returns an instance of a class which implements this interface
getIso2CountryCodeByName(String) - Static method in class org.goplanit.utils.locale.LocaleUtils: Collect ISO2 code based on full name
getIterationData() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Return the simulation data for the current iteration
getIterationData() - Method in class org.goplanit.assignment.algorithmb.AlgorithmBEquilibration: Collect the iteration information collected during the equilibration
getIterationData() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Return the simulation data for the current iteration
getIterationData() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Return the simulation data for the current iteration
getIterationIndex() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Collect the current iteration index of the simulation
getIterationIndex() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm
getIterationIndex() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Collect the current iteration index of the simulation
getIterationIndex() - Method in class org.goplanit.assignment.SimulationData: Returns the current iteration index
getIterationIndex() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Collect the current iteration index of the simulation
getIterationIndex() - Method in class org.goplanit.assignment.TrafficAssignment: Collect the current iteration index of the simulation
getIterationIndex(TrafficAssignment) - Static method in class org.goplanit.output.property.IterationIndexOutputProperty: Returns the current iteration index
getIterationIndexForSubOutputType(SubOutputTypeEnum) - Method in class org.goplanit.output.adapter.OdOutputTypeAdapterImpl: ODSkimOutputType.COST: Cost is collected through the shortest path in iteration i based on the link costs of iteration i-1, so the od cost of i-1 are only known once we are in iteration i, hence this information is trailing behind one iteration, and we can only store it in i.
getIterationIndexForSubOutputType(SubOutputTypeEnum) - Method in interface org.goplanit.output.adapter.OutputTypeAdapter: Determine the iteration index that is relevant for the data related to the provided output type enum Generally, this equates to the actual current iteration index, but if the data for example is trailing an iteration then this will collect the correct iteration index for this data as opposed to the iteration index of the simulation itself.
getIterationIndexForSubOutputType(SubOutputTypeEnum) - Method in class org.goplanit.output.adapter.OutputTypeAdapterImpl: Default implementation assumes that regular iteration index is used, which in most cases it true, only when for example costs are trailing one iteration behind in case they are only revealed in the next iteration this method should be overridden
getIterationOffset() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Currently set iteration offset beyond which the analyser is applied
getIterator() - Method in class org.goplanit.data.MultiKeyPlanItData: Returns a MultiKeyPlanItDataIterator for the contents of this map
getIterator(Mode, TimePeriod, Integer, OutputType) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns a MemoryOutputIterator for the contents of the specified MultiKeyPlanItData map
getJarFileSystem(URI) - Static method in class org.goplanit.utils.resource.ResourceUtils: Collect the jar as a FileSystem to access its internals
getJvmUserDirUri() - Static method in class org.goplanit.utils.misc.UriUtils: Find user dir URI of JVM, which is the current working dir unless overridden upon instantiation of the Jvm
getKeyByValue(V) - Method in interface org.goplanit.utils.wrapper.MapWrapper: collect the key used for the given value
getKeyByValue(V) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: collect the key used for the given value
getKeys() - Method in interface org.goplanit.data.MultiKeyPlanItDataIterator: Returns an array of keys for the current iteration
getKeys() - Method in class org.goplanit.data.MultiKeyPlanItDataIteratorImpl: Returns an array of keys for the current iteration
getKeys() - Method in class org.goplanit.output.formatter.MemoryOutputIterator: Returns an array of keys for the current iteration
getKnownSupportedEventTypes() - Method in class org.goplanit.component.PlanitComponent: Each component may override this default which indicates it does not support any events, meaning that the component is not notified on any planitcomponent events.
getKnownSupportedEventTypes() - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeHandler: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeSegmentHandler: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.input.InputBuilderListener: Each input builder listener should be able to deal with at least the following Events and as such is automatically registered to listen for them when providing a derived instance to a PLANit project by providing them here: PopulateNetworkEvent for populating a newly created empty network PopulateZoningEvent for populating a newly created empty zoning PopulateDemandsEvent for populating a newly created empty demands PopulatePhysicalCostEvent for populating a newly created empty physical costs PopulateInitialLinkSegmentCostEvent for populating a newly created empty initial link segment costs PopulateComponentEvent for all events that can be intercepted byt no dedicated event exists for (likely only for internal platform use)
getKnownSupportedEventTypes() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: The fundamental diagram component registers for the PopulateFundamentalDiagramEvent in order to initialise its default fundamental diagrams based on the network layer that it is created for.
getKnownSupportedEventTypes() - Method in interface org.goplanit.utils.event.EventListener: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.zoning.ConnectoidsImpl: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.zoning.modifier.event.handler.UpdateDirectedConnectoidsOnBreakLinkSegmentHandler: Collect explicitly supported event types that are known.
getKnownSupportedEventTypes() - Method in class org.goplanit.zoning.TransferZoneGroupsImpl: Collect explicitly supported event types that are known.
getLaneConfiguration() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: collect the current configuration setup for applying number of lanes in case the lanes tag is not available on the parsed osmway
getLastEdgeSegment(boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Collect the last edge segment of one of the two segments
getLastIteration() - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns the value of the last iteration of recorded data
getLastLegSegment() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Get last leg segment of the routed trip
getLastParentLink() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: Collect the last parent link
getLatestIdForToken(IdGroupingToken, Class<? extends Object>) - Static method in class org.goplanit.utils.id.IdGenerator: collect the latest generated id for a given class and token
getLayerByMode(Mode) - Method in class org.goplanit.network.TransportLayerNetwork: collect a layer by mode
getLayerData() - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: collect the gathered data pertaining to Osm to Planit entity mapping that might be relevant to other parts of the reader
getLayerIdGroupingToken() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: Collect the id grouping token used for all entities registered on the layer, i.e., this layer's specific identifier for generating ids unique and contiguous within this layer
getLayerIdGroupingToken() - Method in interface org.goplanit.utils.network.layer.UntypedDirectedGraphLayer: Collect the id grouping token used for all entities registered on the layer, i.e., this layer's specific identifier for generating ids unique and contiguous within this layer
getLayerModifier() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: Provide access to the modifier options for this layer
getLayerModifier() - Method in interface org.goplanit.utils.network.layer.TopologicalLayer: Provide access to the modifier options for this layer
getLayerModifier() - Method in interface org.goplanit.utils.network.layer.UntypedDirectedGraphLayer: Provide access to the modifier options for this layer
getLayerParser(MacroscopicNetworkLayerImpl) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: provide reference to a layer parser
getLayerParsers() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: provide reference to the used layer parsers for each of the identified layers
getLayers() - Method in class org.goplanit.service.routed.RoutedServices: Provide access to the layer specific routed services
getLayersOfType() - Method in interface org.goplanit.utils.network.layers.TransportLayers: Allows you to collect all registered layers of a specific derived transport layer type
getLegs() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Collect the service legs
getLegs() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Identical to Vertex.getEdges()
getLegs() - Method in interface org.goplanit.utils.network.layer.ServiceNetworkLayer: Collect the service legs
getLegSegment(boolean) - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: collect edgeSegment as something extending LegSegment which is to be expected for any Leg.
getLegSegment(int) - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Get a leg segment in a particular position of the routed trip
getLegSegment(int) - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Get a leg segment in a particular position of the routed trip
getLegSegment(ServiceNode) - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Identical to #getEdgeSegment(DirectedVertex)
getLegSegmentAb() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: collect edgeSegment Ab as something extending LegSegment which is to be expected for any Leg.
getLegSegments() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Collect the service leg segments
getLegSegments() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: Collect all available leg segments of this leg
getLegSegments() - Method in interface org.goplanit.utils.network.layer.ServiceNetworkLayer: Collect the service leg segments
getLength() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Returns the length of this link
getLength(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the length of the current link segment
getLengthKm() - Method in class org.goplanit.graph.EdgeImpl: Return length of this edge in km
getLengthKm() - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Sum of the underlying network layer link lengths.
getLengthKm() - Method in interface org.goplanit.utils.graph.Edge: Return length of this edge in km
getLengthKm(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: length can be used to virtually assign a length to the connectoid/zone combination
getLengthKm(Zone) - Method in class org.goplanit.zoning.ConnectoidImpl: length can be used to virtually assign a length to the connectoid/zone combination
getLengthUnits() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getLevelId() - Method in class org.goplanit.gtfs.model.GtfsLevel: Get the level id
getLinkBoundary() - Method in class org.goplanit.assignment.ltm.eltm.event.TriggerEvent
getLinkBoundaryLocation() - Method in class org.goplanit.assignment.ltm.eltm.event.ReleaseEvent: collect the link boundary location of this release event, i.e., the opposite link boundary of its source trigger event
getLinkCost() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Get the cost for the current link
getLinkFlow() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Return the flow through this link
getLinkId() - Method in class org.goplanit.network.layer.physical.LinkImpl: Return id of this instance.
getLinkId() - Method in interface org.goplanit.utils.network.layer.physical.Link: Return id of this instance.
getLinkIdClass() - Method in interface org.goplanit.utils.network.layer.physical.Link: Return class used to generate unique link ids via the id generator
getLinkIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for links
getLinkOsmWayType(Link) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: Collect the osm way type of the link
getLinks() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Collect the links
getLinks() - Method in interface org.goplanit.utils.network.layer.MacroscopicNetworkLayer: Collect the links
getLinks() - Method in interface org.goplanit.utils.network.layer.physical.Node: It is expected that nodes are used in conjunction with links.
getLinks() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Collect the links
getLinkSegment(boolean) - Method in interface org.goplanit.utils.network.layer.physical.Link: collect edgeSegment as something extending LinkSegment which is to be expected for any link.
getLinkSegment(Node) - Method in interface org.goplanit.utils.network.layer.physical.Node: collect the first edge segment corresponding to the provided end node
getLinkSegmentAb() - Method in interface org.goplanit.utils.network.layer.physical.Link: collect edgeSegment Ab as something extending LinkSegment which is to be expected for any link.
getLinkSegmentBa() - Method in interface org.goplanit.utils.network.layer.physical.Link: collect edgeSegment Ba as something extending LinkSegment which is to be expected for any link.
getLinkSegmentBa() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: collect edgeSegment Ba as something extending LegSegment which is to be expected for any link.
getLinkSegmentByExternalId(MacroscopicNetwork, String) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: returns the first link segment for which the given external id matches.
getLinkSegmentExternalId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the external Id of the current link segment
getLinkSegmentId() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Return id of this instance.
getLinkSegmentId() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Return id of this instance.
getLinkSegmentId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the Id of the current link segment
getLinkSegmentIdClass() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Return class used to generate unique link ids via the id generator
getLinkSegmentIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for link segments
getLinkSegmentIfLinkIsOneWayForMode(Link, Mode) - Static method in class org.goplanit.osm.util.PlanitLinkSegmentUtils: Collect the one way link segment for the mode if the link is in fact one way.
getLinkSegmentInflowPcuHour(LinkSegment) - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessee: Get the total inflow rate of a link segment over all modes
getLinkSegmentInflowsPcuHour() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Get link segment inflow rates for all link segments, where index is based on id of the link segment.
getLinkSegmentInflowsPcuHour() - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessee: Get link segment inflow rates for all link segments, where index is based on id of the link segment.
getLinkSegmentOutflowPcuHour(LinkSegment) - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessee: Get the outflow rate of a link segment over all modes
getLinkSegmentOutflowsPcuHour() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Get link segment outflow rates for all link segments, where index is based on id of the link segment.
getLinkSegmentOutflowsPcuHour() - Method in interface org.goplanit.interactor.LinkInflowOutflowAccessee: Get link segment outflow rates for all link segments, where index is based on id of the link segment.
getLinkSegmentOutputPropertyValue(OutputProperty, LS) - Method in class org.goplanit.output.adapter.UntypedLinkOutputTypeAdapterImpl: Return the value of a specified output property of a link segment
getLinkSegmentOutputPropertyValue(OutputProperty, MacroscopicLinkSegment, Mode, TimePeriod) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmLinkOutputTypeAdapter: Return the value of a specified output property of a link segment The DENSITY case should never be called for TraditionalStaticAssignment.
getLinkSegmentOutputPropertyValue(OutputProperty, MacroscopicLinkSegment, Mode, TimePeriod) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentLinkOutputTypeAdapter: Return the value of a specified output property of a link segment
getLinkSegmentOutputPropertyValue(OutputProperty, MacroscopicLinkSegment, Mode, TimePeriod) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Return the value of a specified output property of a link segment
getLinkSegmentOutputPropertyValue(OutputProperty, MacroscopicLinkSegment, Mode, TimePeriod) - Method in class org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapterImpl: Return the value of a specified output property of a link segment The DENSITY case should never be called for TraditionalStaticAssignment.
getLinkSegmentOutputPropertyValue(OutputProperty, T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Return the value of a specified output property of a link segment
getLinkSegments() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Collect the link segments
getLinkSegments() - Method in interface org.goplanit.utils.network.layer.MacroscopicNetworkLayer: Collect the link segments
getLinkSegments() - Method in interface org.goplanit.utils.network.layer.physical.Link: collect all available link segments of this link
getLinkSegments() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Collect the link segments
getLinkSegmentTravelTimePcuH(Mode) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Collect the travel time costs for a given mode supported by the loading of this data
getLinkSegmentType() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Collect the link segment type of the link segment
getLinkSegmentType() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Collect the link segment type of the link segment
getLinkSegmentTypeId(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Return the link segment type id of the current link segment
getLinkSegmentTypeIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for link segment types
getLinkSegmentTypeName(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Return the link segment type name of the current link segment
getLinkSegmentTypes() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: collect the link segment types, alternative to using the public member
getLinkSegmentTypes() - Method in interface org.goplanit.utils.network.layer.MacroscopicNetworkLayer: Provide access to registered macroscopic link segment types used across all macroscopic link segments
getLinkSegmentTypeXmlId(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Return the link segment type xml id of the current link segment
getLinkSegmentVolume(LinkSegment) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: #Get the total flow across a link over all modes
getLinkSegmentVolume(LinkSegment) - Method in interface org.goplanit.interactor.LinkVolumeAccessee: Get the total flow across a link over all modes
getLinkSegmentVolumes() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: #Get total link segment flows for all link segments
getLinkSegmentVolumes() - Method in interface org.goplanit.interactor.LinkVolumeAccessee: Get total link segment flows for all link segments
getLinkSegmentXmlId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the XML Id of the current link segment
getLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: The network loading to apply
getLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: The network loading to apply
getLoading() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: The network loading to apply
getLocation() - Method in class org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary: Collect the boundary location of this instance
getLogitModel() - Method in class org.goplanit.path.choice.StochasticPathChoiceConfigurator: Collect the logit model configurator
getManagedIdClass() - Method in interface org.goplanit.utils.id.ManagedIdEntities: Collect the class identifier used for the managed ids within the id group for instances of this class used in this container
getManagedIdClass() - Method in class org.goplanit.utils.id.ManagedIdEntitiesImpl: Collect the class identifier used for the managed ids within the id group for instances of this class used in this container
getMap() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Access to the wrapped map
getMappedModesForAvailableKeys(Map<String, String>, Map<String, String>) - Method in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: Collect all the mapped OsmModes for keys that are found to be present in the passed in tags map
getMappedOsmModes(Collection<Mode>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Collect the mapped OSM modes based on the provided PLANit modes (if any)
getMappedOsmModes(Mode) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Collect the mapped OSM modes based on the provided PLANit mode
getMappedOsmModes(Mode) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: convenience method that collects the currently mapped Osm modes for the given planit mode
getMappedOsmRailModes(Mode) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: convenience method that collects the currently mapped osm rail modes for the given planit mode
getMappedOsmRoadModes(Mode) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: convenience method that collects the currently mapped osm road modes for the given planit mode
getMappedPlanitMode(String) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: convenience method that collects the currently mapped PLANit mode (road or rail) for the given OSM mode
getMappedPlanitMode(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: convenience method that collects the currently mapped PLANit mode for the given OSM mode
getMappedPlanitModes(Collection<String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: convenience method that collects the currently mapped PLANit modes (road or rail) for the given OSM modes
getMappedPlanitRailMode(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: convenience method that collects the currently mapped PLANit mode for the given OSM mode
getMappedPlanitRoadMode(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: convenience method that collects the currently mapped PLANit road mode for the given OSM mode
getMatrixContent() - Method in class org.goplanit.utils.od.OdMatrixIterator: Collect contents as type
getMaximum(double[]) - Static method in class org.goplanit.utils.arrays.ArrayUtils: find the maximum of an array of doubles
getMaximumDensity(MacroscopicLinkSegment) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Returns the flow density of the current link
getMaximumDensityPcuKm() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Collect maximum viable density
getMaximumSpeed(MacroscopicLinkSegment, Mode) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Returns the maximum speed through the current link segment
getMaximumSpeedKmH() - Method in class org.goplanit.mode.ModeImpl: maximum speed for this mode
getMaximumSpeedKmH() - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Collect the maximum speed in km/h
getMaximumSpeedKmH() - Method in interface org.goplanit.utils.mode.Mode: maximum speed for this mode
getMaximumSpeedKmH() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Collect the maximum speed in km/h
getMaximumSpeedKmH(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Collect the maximum speed based on the combination of the mode and any restrictions imposed by the type on this mode.
getMaximumSpeedKmHour() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Collect maximum viable speed assuming the free flow branch is concave, so maximum speed occurs at zero density
getMaximumSpeedOrDefaultKmH(double) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Collect the maximum speed set, or otherwise the provided default
getMaxIterations() - Method in class org.goplanit.gap.StopCriterion: Return the maximum allowable number of iterations
getMaxIterations() - Method in class org.goplanit.gap.StopCriterionConfigurator: Return the maximum allowable number of iterations
getMeasuredNetworkCost() - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Return the measured cost
getMeasuredValue() - Method in class org.goplanit.gap.NormBasedGapFunction: Return the actual system travel time
getMergeVertex() - Method in class org.goplanit.assignment.ltm.sltm.Pas: Collect the end vertex of the PAS
getMinIterationThreshold() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Get the minimum iteration threshold to use before we can classify as non-improving
getModalLinkSegmentCosts(Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Retrieve the link segment costs for a specified mode
getMode() - Method in interface org.goplanit.service.routed.RoutedModeServices: The supported mode for the routed services registered
getMode() - Method in class org.goplanit.service.routed.RoutedModeServicesImpl: The supported mode for the routed services registered
getMode() - Method in class org.goplanit.userclass.UserClass: Return the mode of travel of this user class
getModeAccessOverwrittenByOsmWayId(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: collect the overwrite type values that should be used
getModeExternalId(Mode) - Static method in class org.goplanit.output.property.ModeExternalIdOutputProperty: Returns the external Id of the current mode
getModeId(Mode) - Static method in class org.goplanit.output.property.ModeIdOutputProperty: Returns the Id of the current mode
getModeIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for modes
getModelledSpeedLimitKmH(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Collect the maximum speed limit for the mode by taking the minimum of: (i) physical speed limit, (ii) mode's maximum speed limit, (iii) link segment type's mode specific speed limit.
getModes() - Method in class org.goplanit.network.TransportLayerNetwork: Collect the modes
getModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: Collect the modes that represent the intersection of the passed in modes and available modes of this class
getModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: Collect the modes that represent the intersection of the passed in modes and available modes of this class
getModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: collect the modes that represent the intersection of the passed in modes and available modes of this class
getModeSpecificData() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Collect the data per mode for all modes
getModesWithLanesInDirection(Map<String, String>, boolean) - Method in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: Collect the registered eligible OSM modes with lanes present without any further direction information via the lanes:<mode> mode tags
getModesWithLanesInDirection(Map<String, String>, boolean) - Method in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: collect the registered eligible OSM modes with lanes present for a particular direction via the lanes:<mode> mode tags
getModesWithLanesWithoutDirection(Map<String, String>) - Method in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: Collect the registered eligible OSM modes with lanes present without any further direction information via the lanes:<mode> mode tags
getModesWithLanesWithoutDirection(Map<String, String>) - Method in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: Collect the registered eligible OSM modes with lanes present without any further direction information via the lanes:<mode> mode tags
getModeXmlId(Mode) - Static method in class org.goplanit.output.property.ModeXmlIdOutputProperty: Returns the Xml Id of the current mode
getModifiedLinkSegmentType(Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes: collect a modified link segment type with the provided added/removed modes exist
getModifiedLinkSegmentType(MacroscopicLinkSegmentType, Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes: Collect a modified link segment type with the provided added/removed modes if it exists
getModifiedZoning() - Method in class org.goplanit.zoning.modifier.event.ModifiedZoneIdsEvent: The zoning on which the modification took place
getMotorisationType() - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl
getMotorisationType() - Method in interface org.goplanit.utils.mode.PhysicalModeFeatures: collect the motorisation type of this mode
getMultiplier() - Method in enum org.goplanit.tntp.enums.CapacityPeriod
getMultiplier() - Method in enum org.goplanit.tntp.enums.LengthUnits
getMultiplier() - Method in enum org.goplanit.tntp.enums.SpeedUnits
getMultiplier() - Method in enum org.goplanit.tntp.enums.TimeUnits
getName() - Method in class org.goplanit.graph.EdgeImpl: get the name of the edge
getName() - Method in class org.goplanit.mode.ModeImpl: Name of this mode
getName() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Return the name of this macroscopic link segment type
getName() - Method in class org.goplanit.network.layer.physical.NodeImpl: get the name of this node (if any)
getName() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.CostTimesFlowOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.DensityOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.DestinationZoneIdOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
getName() - Method in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
getName() - Method in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
getName() - Method in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.FlowOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.InflowOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.IterationIndexOutputProperty
getName() - Method in class org.goplanit.output.property.LengthOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
getName() - Method in class org.goplanit.output.property.LinkSegmentIdOutputProperty
getName() - Method in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
getName() - Method in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
getName() - Method in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.ModeExternalIdOutputProperty
getName() - Method in class org.goplanit.output.property.ModeIdOutputProperty
getName() - Method in class org.goplanit.output.property.ModeXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.NumberOfLanesOutputProperty
getName() - Method in class org.goplanit.output.property.OdCostOutputProperty
getName() - Method in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
getName() - Method in class org.goplanit.output.property.OriginZoneIdOutputProperty
getName() - Method in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.OutflowOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.OutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.PathIdOutputProperty
getName() - Method in class org.goplanit.output.property.PathOutputStringProperty
getName() - Method in class org.goplanit.output.property.RunIdOutputProperty
getName() - Method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty: Returns the name of the output property
getName() - Method in class org.goplanit.output.property.TimePeriodIdOutputProperty
getName() - Method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
getName() - Method in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
getName() - Method in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
getName() - Method in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
getName() - Method in class org.goplanit.output.property.VcRatioOutputProperty: Returns the name of the output property
getName() - Method in interface org.goplanit.service.routed.RoutedService: Name of the service, can be a number.
getName() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Name of the service, can be a number.
getName() - Method in class org.goplanit.userclass.TravelerType: Collect the name
getName() - Method in class org.goplanit.userclass.UserClass: Get the name of this user class
getName() - Method in class org.goplanit.utils.event.EventType
getName() - Method in interface org.goplanit.utils.graph.Edge: get the name of the edge
getName() - Method in interface org.goplanit.utils.mode.Mode: Name of this mode
getName() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Return the name of this macroscopic link segment type
getName() - Method in interface org.goplanit.utils.network.layer.physical.Node: get the name of this node (if any)
getName() - Method in enum org.goplanit.utils.unit.UnitType
getName() - Method in interface org.goplanit.utils.zoning.Centroid: The name of the centroid
getName() - Method in interface org.goplanit.utils.zoning.Connectoid: The name of the connectoid
getName() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Name of the group
getName() - Method in interface org.goplanit.utils.zoning.Zone: Name of the zone
getName() - Method in class org.goplanit.zoning.CentroidImpl: The name of the centroid
getName() - Method in class org.goplanit.zoning.ConnectoidImpl: The name of the connectoid
getName() - Method in class org.goplanit.zoning.TransferZoneGroupImpl: Name of the group
getName() - Method in class org.goplanit.zoning.ZoneImpl: Name of the zone
getNameDescription() - Method in interface org.goplanit.service.routed.RoutedService: Description of the name of the service, usually a short elaboration in addition to the name (number), for example for a bus the name could be 370 and the nameDescription "Balmain to Coogee"
getNameDescription() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Description of the name of the service, usually a short elaboration in addition to the name (number), for example for a bus the name could be 370 and the nameDescription "Balmain to Coogee"
getNegativeAccessValueTags() - Static method in class org.goplanit.osm.tags.OsmAccessTags: collect all nagtive related access value tags indicating no (general) access.
getNetwork() - Method in class org.goplanit.io.project.PlanItSimpleProject: Return the current network object
getNetworkBoundingBox() - Method in class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: collect the bounding box of the network that is parsed
getNetworkDataForZoningReader() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: collect the network data required for parsing osm zoning data on the zoning reader
getNetworkFileColumns() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getNetworkGroupingTokenId() - Method in class org.goplanit.network.Network: collect the grouping token for this network instance
getNetworkLayerData(TransportLayer) - Method in class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: Collect layer specific data
getNetworkReaderData() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Collect the network data gathered
getNetworkSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: provide access to the network reader settings
getNetworkSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Collect network settings
getNetworkSettings() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Collect network settings
getNetworkSettings() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Provide access to the network reader settings
getNetworkSettings() - Method in class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: network reader settings as used for populating the planti network absed on osm data
getNetworkToPopulate() - Method in class org.goplanit.component.event.PopulateNetworkEvent: collect network to populate
getNetworkToPopulate() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getNetworkToZoningData() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get network to zoning data
getNewlyBrokenEdgeSegment() - Method in class org.goplanit.graph.modifier.event.BreakEdgeSegmentEvent: Collect broken edge segment
getNextFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the next flow acceptance factors
getNextFlowCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the next flow capacity factors
getNextReceivingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: collect next receiving flows
getNextSegmentFlows() - Method in class org.goplanit.assignment.traditionalstatic.ModeData: collect next segment flows
getNextSendingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: collect next sending flows
getNextStorageCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Access to the next storage capacity factors
getNodeA() - Method in interface org.goplanit.utils.network.layer.physical.Link: collect vertex A as something extending node which is to be expected for any link.
getNodeB() - Method in interface org.goplanit.utils.network.layer.physical.Link: collect vertex A as something extending node which is to be expected for any link.
getNodeId() - Method in class org.goplanit.network.layer.physical.NodeImpl: Collect the id of the node.
getNodeId() - Method in interface org.goplanit.utils.network.layer.physical.Node: Collect the id of the node.
getNodeIdClass() - Method in interface org.goplanit.utils.network.layer.physical.Node: Return class used to generate unique link ids via the id generator
getNodeModel() - Method in class org.goplanit.assignment.ltm.LtmConfigurator: Collect the node model configurator
getNodePathString(DirectedPath, Function<Vertex, Object>) - Static method in class org.goplanit.utils.path.PathUtils: Returns the path as a String of comma-separated node Ids using the id mapper
getNodes() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Collect the nodes
getNodes() - Method in interface org.goplanit.utils.network.layer.MacroscopicNetworkLayer: Collect the nodes
getNodes() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Collect the nodes
getNonUrbanHighwayDefaults() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults
getNorm() - Method in class org.goplanit.gap.NormBasedGapFunction
getNumberOfAccessZones() - Method in interface org.goplanit.utils.zoning.Connectoid: the number of accessible zones registered
getNumberOfAccessZones() - Method in class org.goplanit.zoning.ConnectoidImpl: the number of accessible zones registered
getNumberOfCentroids() - Method in interface org.goplanit.utils.zoning.Zones: Each zone has exactly one centroid, so this is functionally equivalent to calling MapWrapper.size()
getNumberOfCentroids() - Method in class org.goplanit.zoning.Zoning: collect the number of centroids across all zones (od and transfer zones)
getNumberOfConnectoids() - Method in class org.goplanit.zoning.Zoning: collect the number of connectoids (od and transfer)
getNumberOfConnectoidSegments() - Method in class org.goplanit.network.transport.TransportModelNetwork: Returns the total number of connectoid segments available in this transport network
getNumberOfEdges() - Method in interface org.goplanit.utils.graph.Vertex: Number of entries in edge segments
getNumberOfEdgeSegmentsAllLayers() - Method in class org.goplanit.network.transport.TransportModelNetwork: Returns the total number of edge segments available in this traffic assignment by combining the physical and non-physical link segments
getNumberOfIncomingLinkSegments() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: Collect number of incoming link segments
getNumberOfKeepOsmNodesOutsideBoundingPolygon() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: count number of marked OSM nodes to keep
getNumberOfKeepOsmWaysOutsideBoundingPolygon() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: count number of marked OSM ways to keep
getNumberOfLanes() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Collect the number of lanes of this segment
getNumberOfLanes() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Collect the number of lanes of this segment
getNumberOfLanes(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the number of lanes of the current link
getNumberOfLegSegments() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Collect the number of registered leg segments
getNumberOfLegSegments() - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Collect the number of registered leg segments
getNumberOfLinks() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Number of links
getNumberOfLinks() - Method in interface org.goplanit.utils.network.layers.UntypedPhysicalNetworkLayers: Number of links across all layers
getNumberOfLinkSegments() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Number of link segments
getNumberOfLinkSegments() - Method in interface org.goplanit.utils.network.layers.UntypedPhysicalNetworkLayers: Number of link segments across all layers
getNumberOfNodes() - Method in interface org.goplanit.utils.network.layer.physical.UntypedPhysicalLayer: Number of nodes
getNumberOfNodes() - Method in interface org.goplanit.utils.network.layers.UntypedPhysicalNetworkLayers: Number of nodes across all layers
getNumberOfOdPathSets() - Method in class org.goplanit.path.OdPathSets: Collect the number of registered od path sets
getNumberOfOdZones() - Method in interface org.goplanit.utils.od.OdData: Returns the number of zones contained in the object
getNumberOfOdZones() - Method in class org.goplanit.utils.od.OdDataImpl: Returns the number of zones contained in the object
getNumberOfOsmWaysWithMultiplePlanitLinks() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: the number of OSM ways with multiple PLANit links created for them
getNumberOfOuterRoleOsmWays() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: collect number of oter role osm ways that we kepts
getNumberOfOutgoingLinkSegments() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: Collect number of outgoing link segments
getNumberOfPhysicalLinkSegmentsAllLayers() - Method in class org.goplanit.network.transport.TransportModelNetwork: Returns the total number of link segments available in this transport network across all eligible layers
getNumberOfPhysicalNodesAllLayers() - Method in class org.goplanit.network.transport.TransportModelNetwork: Returns the total number of physical nodes available in this transport network across all eligible layers
getNumberOfVertices() - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Based on the registered edge segments, the number of vertices is automatically determined.
getNumberOfVertices() - Method in interface org.goplanit.utils.graph.directed.DirectedSubGraph: Based on the registered edge segments, the number of vertices is automatically determined.
getNumberOfVerticesAllLayers() - Method in class org.goplanit.network.transport.TransportModelNetwork: Returns the total physical vertices and centroid vertices (of od and/or transfer zones) in this transport network
getNumeratorUnitTypes() - Method in class org.goplanit.utils.unit.GroupUnit: All registered units in the numerator
getObjectType() - Method in class org.goplanit.gtfs.scheme.GtfsFileScheme
getOdDemands() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: access to od demands for loading
getOdDemands() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Get od demands used
getOdOutputPropertyValue(OutputProperty, OdDataIterator<?>, Mode, TimePeriod) - Method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the specified output property values for the current cell in the OD Matrix Iterator
getOdOutputPropertyValue(OutputProperty, OdDataIterator<?>, Mode, TimePeriod) - Method in class org.goplanit.output.adapter.OdOutputTypeAdapterImpl: Returns the specified output property values for the current cell in the OD Matrix Iterator
getOdPathMatrix(Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Retrieve the current OD path for a specified mode
getOdPathMatrix(Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticPathOutputTypeAdapter: Retrieve an OD path matrix object for a specified mode
getOdPathMatrix(Mode) - Method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Retrieve an OD path matrix object for a specified mode
getOdSkimMatrix(OdSkimSubOutputType, Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentOdOutputTypeAdapter: Retrieve an OD skim matrix for a specified OD skim output type and mode
getOdSkimMatrix(OdSkimSubOutputType, Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Retrieve the skim matrix for a specified mode and skim output type
getOdSkimMatrix(OdSkimSubOutputType, Mode) - Method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Retrieve an OD skim matrix for a specified OD skim output type and mode
getOdSkimOutputType() - Method in class org.goplanit.od.skim.OdSkimMatrix: Returns the type of the current OD skim matrix
getOdValue(OdDataIterator<T>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the Od value
getOdZoneId() - Method in interface org.goplanit.utils.zoning.OdZone: In addition to a zone id across all zones of any derived type, each Od zone also has a unique id across the Od zones specifically
getOdZoneId() - Method in class org.goplanit.zoning.OdZoneImpl: In addition to a zone id across all zones of any derived type, each Od zone also has a unique id across the Od zones specifically
getOdZoneIdClass() - Method in interface org.goplanit.utils.zoning.OdZone
getOdZones() - Method in class org.goplanit.utils.od.OdDataImpl: Access to underlying zones
getOdZones() - Method in class org.goplanit.zoning.Zoning: Access to the odZones container
getOppositeBoundaryLocation() - Method in class org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary: collect the opposite location of this boundary.
getOrigin() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Get the origin, the root of this bush
getOriginZoneExternalId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the origin zone external Id for the current cell in the OD origin
getOriginZoneExternalId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the origin zone external Id for the current cell in the OD path matrix
getOriginZoneId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the origin zone Id for the current cell in the OD origin
getOriginZoneId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the origin zone Id for the current cell in the OD path matrix
getOriginZoneXmlId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.OdOutputTypeAdapter: Returns the origin zone XML Id for the current cell in the OD origin
getOriginZoneXmlId(OdDataIterator<?>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the Xml Id of the origin zone for the current cell in the OD path matrix
getOsmCircularWays() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: collect the identified circular ways (unmodifiable)
getOsmData() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderData: collect the osm related tracking data
getOsmModesWithValueTag(Map<String, String>, Collection<String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect all OSM modes with key=<OSM mode name> value=the access value tags that are passed in and available from the supported modes (also passed in).
getOsmNetworkToPopulate() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Collect the osm network to populate
getOsmNode(long) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: collect an osm node
getOsmNodeByLocation(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Collect the OSM node available for the given location (if any), either internal to existing PLANit node or already available as converted PLANit node at that location
getOsmNodeInternalToLinkByLocation(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: collect osm node registered as internal to an already created planit link based on its location
getOsmNodes() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: collect the osm nodes (unmoidifable)
getOsmNodes() - Method in class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: Collect OSM nodes
getOsmPedestrianKeyTags() - Static method in class org.goplanit.osm.tags.OsmPedestrianTags: collect set of key tags that signify specific pedestrian configurations.
getOsmRailModesWithValueTag(Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: collect all OSM rail modes with key=<OSM mode name> value=the access value tags that are passed in.
getOsmRoadModesWithValueTag(Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: collect all OSM road going modes with key=<OSM mode name> value=the access value tags that are passed in.
getOsmWayNodeIndexByLocation(OsmWay, Point, OsmNetworkReaderData) - Static method in class org.goplanit.osm.util.OsmWayUtils: Collect index by location within the way.
getOtherFileDependency() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Collect the dependency on other file type's presence/or not.
getOuterRoleOsmWay(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: collect an unprocessed osm way that is identified as an outer role that is eligible as a platform/transfer zone
getOutflows() - Method in class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: access to the tracked inflows
getOutputConfiguration() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Provide the output configuration for user access
getOutputConfiguration() - Method in class org.goplanit.output.OutputManager: Get the OutputConfiguration object
getOutputDataValue(Mode, TimePeriod, Integer, OutputType, OutputPropertyType, Object[]) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Get a specified data value
getOutputDirectory() - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: The output directory to use
getOutputFileName() - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: The output file name to use
getOutputFormatter(long) - Method in class org.goplanit.project.CustomPlanItProject: Retrieve an output formatter object given its id
getOutputFormatters() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Returns a list of output formatters registered on this assignment
getOutputFormatters() - Method in class org.goplanit.output.OutputManager: Returns the list of currently registered OutputFormatter objects for a specified output type
getOutputKeyProperties() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Returns an array of output properties for keys used in MemoryOutputFormatter The output array can only contain output properties which are of ID_PRIORITY
getOutputKeyProperties(OutputType) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns the array of output properties representing the output types of the keys for the current output type
getOutputManager() - Method in class org.goplanit.assignment.TrafficAssignment: Collect the output manager
getOutputManager() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Collect the registered output manager
getOutputPathDirectory() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: The outputPathDirectory used
getOutputProperties() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Returns the current set of output properties for this output configuration
getOutputProperty(OutputPropertyType) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Collect the registered output property by its type
getOutputPropertyType() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.CostTimesFlowOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.DensityOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.DestinationZoneIdOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.FlowOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.InflowOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.IterationIndexOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LengthOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.ModeExternalIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.ModeIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.ModeXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.NumberOfLanesOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.OdCostOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.OriginZoneIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.OutflowOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.OutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.PathIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.PathOutputStringProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.RunIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputPropertyType() - Method in class org.goplanit.output.property.TimePeriodIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
getOutputPropertyType() - Method in class org.goplanit.output.property.VcRatioOutputProperty: Return the value of the OutputProperty enumeration for this property
getOutputType() - Method in interface org.goplanit.output.adapter.OutputTypeAdapter: Return the output type corresponding to this output adapter
getOutputType() - Method in class org.goplanit.output.adapter.OutputTypeAdapterImpl: Return the output type corresponding to this output adapter
getOutputType() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Returns the OutputAdapter being used for this configuration
getOutputTypeAdapter(OutputType) - Method in class org.goplanit.output.adapter.OutputAdapter: Retrieve an output type adapter for a specified output type
getOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.configuration.OutputConfiguration: Collect the output type configuration for the given type if it is activated
getOutputTypeConfiguration(OutputType) - Method in class org.goplanit.output.OutputManager: Collect the output type configuration for the given type
getOutputTypeIndependentPropertyValue(OutputProperty, Mode, TimePeriod) - Method in class org.goplanit.output.adapter.OutputTypeAdapterImpl: Returns the value of properties which are common to all output type adapters
getOutputValueProperties() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Returns an array of output properties for values used in MemoryOutputFormatter The output array can only contain output properties which are not of ID_PRIORITY
getOutputValueProperties(OutputType) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns the array of output properties representing the output types of the data values for the current output type
getOverrideUnit() - Method in class org.goplanit.output.property.OutputProperty: Only when the property allows a unit override and an override is set this method returns the proposed alternative unit to use.
getOverwrittenCapacityMaxDensityByOsmHighwayType(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Collect the overwrite type values that should be used
getOverwrittenCapacityMaxDensityByOsmRailwayType(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: collect the overwrite type values that should be used
getOverwrittenCapacityMaxDensityByOsmWayType(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: collect the overwrite type values that should be used
getOverwrittenStopLocationWaitingArea(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if stop location's osm id is marked for overwritten platform mapping
getParameterTypes(Object[]) - Static method in class org.goplanit.utils.reflection.ReflectionUtils: Method that constructs the parameter types that go with the passed in parameters.
getParentEdge() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Collect the parent edge of the segment
getParentEdge() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Collect the parent edge of the segment
getParentEdge() - Method in interface org.goplanit.utils.graph.EdgeSegment: Collect the parent edge of the segment
getParentEdge() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Collect the parent edge of the segment
getParentLayer() - Method in interface org.goplanit.service.routed.RoutedServicesLayer: The parent service layer of this routed services layer
getParentLayer() - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl: The parent layer of this routed services layer
getParentLeg() - Method in class org.goplanit.network.layer.service.ServiceLegSegmentImpl: Return the parent leg of this leg segment
getParentLeg() - Method in interface org.goplanit.utils.network.layer.service.ServiceLegSegment: Return the parent leg of this leg segment
getParentLegSegment() - Method in class org.goplanit.service.routed.RelativeLegTiming: Collect parent leg segment
getParentLink() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Return the parent link of this link segment
getParentLinks() - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Collect the links that make up this leg ordered and in direction from A to B
getParentLinks() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: Collect the links that make up this leg ordered and in direction from A to B
getParentName() - Method in interface org.goplanit.utils.graph.EdgeSegment: verify if parent (edge) has a name
getParentNetwork() - Method in class org.goplanit.component.event.PopulateDemandsEvent: Collect PLANit network upon which this demands is to be applied
getParentNetwork() - Method in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Collect network these costs should relate to
getParentNetwork() - Method in class org.goplanit.component.event.PopulatePhysicalCostEvent: the network on which to populate the physical cost
getParentNetwork() - Method in class org.goplanit.component.event.PopulateZoningEvent: Collect PLANit network upon which this zoning is to be applied
getParentNetwork() - Method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderSettings: Collect the parent service network for these routed services
getParentNetwork() - Method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderSettings: Collect the parent network for this service network
getParentNetwork() - Method in class org.goplanit.network.layers.ServiceNetworkLayersImpl: The parent network
getParentNetwork() - Method in class org.goplanit.network.ServiceNetwork: The parent network of the service network
getParentNetwork() - Method in class org.goplanit.service.routed.RoutedServices: Collect the parent service network on top of which these services are defined
getParentNetworkLayer() - Method in class org.goplanit.component.event.PopulateFundamentalDiagramEvent: Collect PLANit network layer upon which these fundamental diagrams are to be applied
getParentNetworkLayer() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Collect the parent layer of this service layer
getParentNetworkLayer() - Method in interface org.goplanit.utils.network.layer.ServiceNetworkLayer: Collect the parent layer of this service layer
getParentNode() - Method in class org.goplanit.network.layer.service.ServiceNodeImpl: Collect the network layer node this service node relates to
getParentNode() - Method in interface org.goplanit.utils.network.layer.service.ServiceNode: Provide access to the underlying network node
getParentZone() - Method in interface org.goplanit.utils.zoning.Centroid: Return the parent zone of this centroid
getParentZone() - Method in class org.goplanit.zoning.CentroidImpl: Return the parent zone of this centroid
getParentZoning() - Method in class org.goplanit.component.event.PopulateDemandsEvent: Collect PLANit zoning upon which this demands is to be applied
getParsedBprParameters() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReader: Provide read access to parsed bpr parameters of links (only available after parsing)
getPassByMergeVertex(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Collect all PASs that share the same merge (end) vertex
getPassSortedByReducedCost() - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Construct a priority queue based on the PASs reduced cost, i.e., difference between their high and low cost segments in descending order.
getPathAsString(OdDataIterator<? extends DirectedPath>, PathOutputIdentificationType) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the path as a String of comma-separated Id values
getPathChoice() - Method in class org.goplanit.assignment.ltm.LtmAssignment: The path choice model to use
getPathChoice() - Method in class org.goplanit.assignment.ltm.LtmConfigurator: Collect the path choice configurator
getPathId(OdDataIterator<? extends DirectedPath>) - Static method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Return the Id of the current path If there is no path between the current origin and destination zones, this returns -1
getPathIdentificationType() - Method in class org.goplanit.output.configuration.PathOutputTypeConfiguration: Get the path id type
getPathOutputPropertyValue(OutputProperty, OdDataIterator<? extends DirectedPath>, Mode, TimePeriod, PathOutputIdentificationType) - Method in interface org.goplanit.output.adapter.PathOutputTypeAdapter: Returns the specified output property values for the current cell in the ODPathIterator
getPathOutputPropertyValue(OutputProperty, OdDataIterator<? extends DirectedPath>, Mode, TimePeriod, PathOutputIdentificationType) - Method in class org.goplanit.output.adapter.PathOutputTypeAdapterImpl: Returns the specified output property values for the current cell in the ODPathIterator
getPathwayId() - Method in class org.goplanit.gtfs.model.GtfsPathway: Get the shape id
getPcu() - Method in class org.goplanit.mode.ModeImpl: Passenger car unit conversion factor for this mode
getPcu() - Method in interface org.goplanit.utils.mode.Mode: Passenger car unit conversion factor for this mode
getPcuFowRatePerHour() - Method in class org.goplanit.assignment.ltm.eltm.event.ReleaseFlowEvent
getPcuFowRatePerHour() - Method in class org.goplanit.assignment.ltm.eltm.event.TriggerFlowEvent
getPhysicalCost() - Method in class org.goplanit.assignment.TrafficAssignment: Get the dynamic physical cost object for the current assignment
getPhysicalCost() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Collect the physical cost entity registered on the traffic assignment
getPhysicalCostClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Returns the name of the physical cost class
getPhysicalCostToPopulate() - Method in class org.goplanit.component.event.PopulatePhysicalCostEvent: Collect physical cost to populate
getPhysicalFeatures() - Method in class org.goplanit.mode.ModeImpl: collect the physical features of this mode
getPhysicalFeatures() - Method in interface org.goplanit.utils.mode.Mode: collect the physical features of this mode
getPhysicalLinkSegments(long) - Method in class org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapterImpl: Provide access to the macroscopic link segments
getPhysicalLinkSegments(long) - Method in class org.goplanit.output.adapter.PhysicalLinkOutputTypeAdapterImpl: Provide access to the link segments container
getPhysicalLinkSegments(long) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Return the Link segments for this assignment
getPhysicalSpeedLimitKmH() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: This is the maximum speed that is physically present and a driver can observe from the signs on the road
getPhysicalSpeedLimitKmH() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: This is the maximum speed (Km/h) that is physically present and a driver can observe from the signs on the road
getPlanitData() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderData: collect the planit related tracking data
getPlanitInfrastructureLayerConfiguration() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Allows access to the current planit infrastructure layer configuration which maps planit modes to an infrastructure layer on the to be created PLANit network
getPlanitNodeByLocation(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Collect the PLANit node available for the given location
getPlanitNodeByOsmNode(OsmNode) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Collect the planit node available for this osm node (if any)
getPosition() - Method in class org.goplanit.graph.VertexImpl: #Collect the geometry of the point location of this vertex
getPosition() - Method in class org.goplanit.network.layer.service.ServiceNodeImpl: Based on network node
getPosition() - Method in interface org.goplanit.utils.graph.Vertex: Collect the geometry of the point location of this vertex
getPositionOfOutputKeyProperty(OutputType, OutputPropertyType) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns the position of a property type in the output key property array
getPositionOfOutputKeyProperty(OutputPropertyType) - Method in class org.goplanit.data.MultiKeyPlanItData: Get the position of a property type in the output keys property array
getPositionOfOutputValueProperty(OutputType, OutputPropertyType) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Returns the position of a property type in the output values property array
getPositionOfOutputValueProperty(OutputPropertyType) - Method in class org.goplanit.data.MultiKeyPlanItData: Get the position of a property type in the output values property array
getPositiveAccessValueTags() - Static method in class org.goplanit.osm.tags.OsmAccessTags: collect all positive related access value tags indicating an affirmative access.
getPostfixedOsmRoadModesWithValueTag(String, Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: collect all OSM modes with key=<OSM mode name>:postFix= any of the modeAccessValueTags that are passed in.
getPredefinedModeType() - Method in class org.goplanit.mode.PredefinedModeImpl: Collect the predefined mode type of this mode
getPredefinedModeType() - Method in interface org.goplanit.utils.mode.Mode: collect the predefined mode type
getPredefinedModeTypes() - Static method in enum org.goplanit.utils.mode.PredefinedModeType: collect all predefined mode types
getPredefinedModeTypesWithout(PredefinedModeType...) - Static method in enum org.goplanit.utils.mode.PredefinedModeType: Collect all predefined mode types
getPreferredPrefix(String, String, boolean) - Method in class org.goplanit.io.xml.util.PlanitNamespacePrefixMapper: provide alternative prefix for namespace
getPrefixedOrPostfixedOsmRoadModesWithValueTag(boolean, String, Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: Collect all OSM modes with either preFix:<OSM mode name>= or postFix:<OSM mode name>= any of the modeAccessValueTags that are passed in.
getPrefixedOsmRoadModesWithValueTag(String, Map<String, String>, String...) - Static method in class org.goplanit.osm.util.OsmModeUtils: collect all OSM modes with key=preFix:<OSM mode name>= any of the modeAccessValueTags that are passed in.
getProfiler() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Collect the profiler
getProfiler() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get profiler
getPropertyByKey(String) - Static method in class org.goplanit.io.xml.util.ApplicationProperties: collect property by key
getPtModeHelper() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get the public transport mode parser
getPtv2ValueTags() - Static method in class org.goplanit.osm.tags.OsmPtv2Tags: collect the value tags as they are currently registered
getPublicTransportModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: collect all rail based pt modes available from the passed in modes
getPublicTransportModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: collect all rail based pt modes available from the passed in modes
getPublicTransportModesFrom(Collection<String>) - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: collect all rail based pt modes available from the passed in modes
getPublicTransportSettings() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Provide access to the zoning (pt) reader settings
getRailwayDefaults() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults
getRailwayModeAccessDefaults() - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaults: collect the defaults specifically for railways
getRailwaySettings() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: provide railway specific settings
getRailwayValueTags() - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: collect all known railway value tags that are non-way related
getReader() - Method in class org.goplanit.converter.ConverterBase: get the reader
getReader() - Method in class org.goplanit.converter.network.NetworkConverter: get the reader
getReader() - Method in class org.goplanit.converter.zoning.ZoningConverter: get the reader
getReducedCost() - Method in class org.goplanit.assignment.ltm.sltm.Pas: Returns the difference between the cost of the high cost and the low cost segment.
getReferenceNetwork() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Collect reference network used
getReferenceNetwork() - Method in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Collect the reference network used
getReferenceNetwork() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Get the reference network to use
getReferenceNetwork() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: Reference network for the zoning
getReferenceNetwork() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings: Reference network for the zoning
getReferenceTimeInSeconds() - Method in interface org.goplanit.utils.cumulatives.CumulativePoint
getReferenceTimeInSeconds() - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl
getReferenceZoning() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Collect reference zoning used
getReferenceZoning() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings
getRegisteredIterations() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Number of registered iterations
getRegisteredLocationsInternalToAnyPlanitLink() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Collect all registered locations internal to a planit link (unmodifiable)
getRegisteredLocationsInternalToAnyPlanitLink(int) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: collect all registered locations that are internal to at least the given number of planit links
getRegisteredModesForTimePeriod(TimePeriod) - Method in class org.goplanit.demands.Demands: Get modes registered for the given time period
getRegisteredOsmModesForTransferZone(TransferZone) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Collect any prior registered eligible OSM modes on a PLANit transfer zone (unmodifiable)
getRegisteredOsmNodesInternalToAnyPlanitLink(int) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: collect all registered osm nodes that are internal to at least the given number of planit links
getRegisteredOutputTypeConfigurations() - Method in class org.goplanit.output.OutputManager: Returns a List of registered output type configuration objects
getRegisteredOutputTypes() - Method in class org.goplanit.output.OutputManager: Returns a List of registered output types
getRelativeLegTiming(int) - Method in interface org.goplanit.service.routed.RoutedTripSchedule: Collect a leg timing based on its index
getRelativeLegTiming(int) - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Collect a leg timing based on its index
getRelativeLegTimingsSize() - Method in interface org.goplanit.service.routed.RoutedTripSchedule: Collect the number of registered leg timings
getRelativeLegTimingsSize() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Collect the number of registered leg timings
getRemovedEdge() - Method in class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeEvent: The removed edge
getRemovedEdgeSegment() - Method in class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeSegmentEvent: The removed edge segment
getRemovedVertex() - Method in class org.goplanit.graph.modifier.event.RemoveSubGraphVertexEvent: The removed vertex
getResourceAsInputStream(URI) - Static method in class org.goplanit.utils.resource.ResourceUtils: Collect a resource input stream, which is either file based or not depending whether or not the resource is located in a jar or not
getResourceAsInputStreamReader(URI) - Static method in class org.goplanit.utils.resource.ResourceUtils: Collect a resource input stream reader, which is either file based or not depending whether or not the resource is located in a jar or not
getResourceAsStream(String) - Static method in class org.goplanit.utils.resource.ResourceUtils: Collect a resource as a stream based on provided location
getResourceUri(String) - Static method in class org.goplanit.utils.resource.ResourceUtils: find the resource URI via this class' class loader
getResourceUrl(String) - Static method in class org.goplanit.utils.resource.ResourceUtils: find the resource URL via this class' classloader
getResult() - Method in class org.goplanit.osm.util.PlanitJtsIntersectOsmNodeVisitor: Collect the filtered result created by the visitor
getResult() - Method in class org.goplanit.utils.geo.PlanitJtsItemVisitor: Collect the filtered result created by the visitor
getRoadModeCategories() - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: Collect a copy of the currently registered road mode categories
getRoadModeCategoriesByMode(String) - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: Given the mode, find the related mode category
getRoadModesByCategory(String) - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: collect all the OSM modes that fit within the given Osm mode category
getRootVertex() - Method in interface org.goplanit.graph.directed.acyclic.ACyclicSubGraph: Collect the root vertex of this acyclic subgraph
getRootVertex() - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Collect the root vertex of this acyclic subgraph
getRootVertexSplittingRates() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect the splitting rates for the root vertex (which do not have an entry segment).
getRoutedServicesToPopulate() - Method in class org.goplanit.component.event.PopulateRoutedServicesEvent: collect routed services to populate
getRouteId() - Method in class org.goplanit.gtfs.model.GtfsRoute: Get the route id
getRowValue(OutputPropertyType, Object...) - Method in class org.goplanit.data.MultiKeyPlanItData: Get data value for a specified row and column
getRowValues(Object...) - Method in class org.goplanit.data.MultiKeyPlanItData: Returns an array representing the row of data values defined by the specified array of key values
getRunId() - Method in class org.goplanit.output.adapter.OutputAdapter: Return the id of this assignment run
getRunId(TrafficAssignment) - Static method in class org.goplanit.output.property.RunIdOutputProperty: Returns the current run id
getScheduleBasedTrips() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Trips for a service can be frequency or schedule based, or have both.
getScheduleBasedTrips() - Method in class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Trips for a service can be frequency or schedule based, or have both.
getSegmentCost(InitialModesLinkSegmentCost, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Returns the initial cost.
getSegmentCost(TimePeriod, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Returns the initial cost for each link segment and mode for time period specific registrations.
getSegmentCost(TimePeriod, Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: get the initial cost for a specified mode and link segment
getSendingFlowPcuH(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect the sending flow of an edge segment in the bush, if not present, zero flow is returned
getServiceDescription() - Method in interface org.goplanit.service.routed.RoutedService: Description of the service, longer (if at all) and contextual not meant for end user in reality
getServiceDescription() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Description of the service, longer (if at all) and contextual not meant for end user in reality
getServiceNetworkToPopulate() - Method in class org.goplanit.component.event.PopulateServiceNetworkEvent: collect service network to populate
getServiceNodeA() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: collect vertex A as something extending service node which is to be expected for any service leg.
getServiceNodeB() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: collect vertex B as something extending service node which is to be expected for any service leg.
getServiceNodes() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Collect the service nodes
getServiceNodes() - Method in interface org.goplanit.utils.network.layer.ServiceNetworkLayer: Collect the service nodes
getServicesByMode(Mode) - Method in interface org.goplanit.service.routed.RoutedServicesLayer: The services for a given mode available on this layer.
getServicesByMode(Mode) - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl: The services for a given mode available on this layer.
getSetOfActivatedOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: collect all activated types as a set (copy)
getSettings() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Collect the settings.
getSettings() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: The settings
getSettings() - Method in interface org.goplanit.converter.ConverterReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in interface org.goplanit.converter.ConverterWriter: any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in interface org.goplanit.converter.MultiConverterReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in interface org.goplanit.converter.MultiConverterWriter: Any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.gtfs.reader.GtfsFileReaderBase: The settings of this GTFS file reader
getSettings() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: Any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.service.PlanitRoutedServicesReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.service.PlanitServiceNetworkReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Settings for this reader
getSettings() - Method in class org.goplanit.io.converter.zoning.PlanitZoningWriter: any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriter: Any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.matsim.converter.MatsimNetworkWriter: any settings to configure the writer can be configured by collecting these settings
getSettings() - Method in class org.goplanit.matsim.converter.MatsimZoningWriter: Collect the zoning writer settings
getSettings() - Method in class org.goplanit.osm.converter.helper.OsmModeHelper: Collect the settings containing the mapping between PLANit and OSM modes
getSettings() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Collect the settings which can be used to configure the reader
getSettings() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get PT settings
getSettings() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReader: Collect the settings which can be used to configure the reader
getSettings() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReader: any settings to configure the reader can be configured by collecting these settings
getSettings() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReader: any settings to configure the reader can be configured by collecting these settings
getShapeId() - Method in class org.goplanit.gtfs.model.GtfsShape: Get the shape id
getSkimMatrixMap(Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Retrieve the Map of OD Skim matrices for all active OD Skim Output Types for a specified mode
getSmoothing() - Method in class org.goplanit.assignment.TrafficAssignment: Collect the smoothing object for the current traffic assignment
getSmoothing() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Collect the smoothing entity registered on the traffic assignment
getSmoothingClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Return the name of the smoothing class
getSource() - Method in interface org.goplanit.utils.event.Event: returns a reference to the source of the event however the derived event decides on how to expose its source, either as a pointer or simply an id or something else.
getSource() - Method in class org.goplanit.utils.event.EventImpl: returns a reference to the source of the event however the derived event decides on how to expose its source, either as a pointer or simply an id or something else.
getSourceCRS() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Chosen crs, default is PlanitGeoUtils.DEFAULT_GEOGRAPHIC_CRS
getSourceIdContainer(Class<V>) - Method in class org.goplanit.converter.BaseReaderImpl: access to the container with sourceIds
getSourceTriggerEvent() - Method in class org.goplanit.assignment.ltm.eltm.event.ReleaseEvent: Collect the source trigger event that is the cause of this release event being scheduled
getSpeed() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Return the travel speed for this link
getSpeedKmHourAtZeroDensity() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: Collect the speed at zero density when flow/density cannot be computed.
getSpeedKmHourAtZeroDensity() - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: speed at zero density is the same as the characteristic wave speed
getSpeedKmHourAtZeroFlow() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: Collect the speed at zero flow when flow/density is either not feasible to compute or might not be representative, i.e., when there is no flow, the speed likely should not be zero, but instead reflect the maximum allowed speed instead
getSpeedKmHourAtZeroFlow() - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: speed at zero flow is the same as the characteristic wave speed
getSpeedKmHourByDensity(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The speed at a given density.
getSpeedKmHourByFlow(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: The speed at a given flow.
getSpeedLimit(String) - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: Get a speed limit default for a given way type
getSpeedLimitByHighwayType(OsmSpeedLimitDefaults, boolean, String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Collect the speed limit based on the highway type, e.g.
getSpeedUnits() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
getSplittingRate(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect the bush splitting rate on the given turn
getSplittingRate(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Collect the splitting rates for a given link segment.
getSplittingRate(EdgeSegment, EdgeSegment) - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Obtain the splitting rate of a given turn (non-modifiable)
getSplittingRateData() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Collect the network's current splitting rate data
getSplittingRates(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect the bush splitting rates for a given incoming edge segment
getSplittingRates(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Collect the splitting rates for a given link segment.
getSplittingRates(EdgeSegment) - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Obtain the downstream splitting rates of given node entry segment (can be modified)
getSplittingRates(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Obtain the downstream splitting rates of given node entry segment (can be modified)
getSplittingRates(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Obtain the downstream splitting rates of given node entry segment (can be modified)
getStackFramesAsList() - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: collect the current stack frames as a list
getStackFrameWithOffset(int) - Static method in class org.goplanit.utils.reflection.StackWalkerUtil: Skip any number of stack frames and return the stream at this offset point
getStartNodeId() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Return the id of the start nonde
getStartTimeSeconds() - Method in class org.goplanit.time.TimePeriodImpl: Return the start time
getStartTimeSeconds() - Method in interface org.goplanit.utils.time.TimePeriod: Return the start time
getStationToParallelTracksSearchRadiusMeters() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Collect the maximum search radius set when trying to find parallel lines (tracks) for stand-alone stations
getStationToWaitingAreaSearchRadiusMeters() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Collect the maximum search radius set when trying to map stations to platforms on the networks, when no explicit relation is made known by OSM
getStopCriterion() - Method in class org.goplanit.gap.GapFunction: Return the StopCriterion object
getStopCriterion() - Method in class org.goplanit.gap.GapFunctionConfigurator: Return the StopCriterion object
getStopCriterionClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Return the name of the stopping criterion class
getStopId() - Method in class org.goplanit.gtfs.model.GtfsStop: Get the stop id
getStopToWaitingAreaSearchRadiusMeters() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Collect the maximum search radius set when trying to map stops/platforms to stop positions on the networks, when no explicit relation is made known by OSM
getStrategy() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Return the assignment solution strategy used
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsAgency: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsAttribution: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsCalendar: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsCalendarDate: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsFareAttribute: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsFareRule: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsFeedInfo: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsFrequency: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsLevel: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsObject: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsPathway: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsRoute: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsShape: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsStop: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsStopTime: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsTransfer: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsTranslation: All supported keys for this GTFS object
getSupportedKeys() - Method in class org.goplanit.gtfs.model.GtfsTrip: All supported keys for this GTFS object
getSupportedKeys(GtfsObjectType) - Static method in class org.goplanit.gtfs.util.GtfsUtils: Collect the supported keys via reflection where it is assumed the object type's class has a default constructor.
getSupportedMode() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: The supported modes of this loading
getSupportedModes() - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Collect supported modes, obtained from parent layer
getSupportedModes() - Method in class org.goplanit.network.layer.TransportLayerImpl: collect the modes supported by this infrastructure layer
getSupportedModes() - Method in interface org.goplanit.utils.network.layer.TransportLayer: collect the modes supported by this infrastructure layer
getSupportedRailModeTags() - Static method in class org.goplanit.osm.tags.OsmRailModeTags: provide a all supported rail mode tags (unmodifiable)
getSupportedRailModeTagsAsArray() - Static method in class org.goplanit.osm.tags.OsmRailModeTags: Provide a copy of all supported rail mode tags
getSupportedRoadModeTags() - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: provide a copy of all supported road mode tags
getSupportedRoadModeTagsAsArray() - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: provide a copy of all supported road mode tags
getSupportedWaterModeTags() - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: provide a copy of all supported water mode tags
getSupportedWaterModeTagsAsArray() - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: provide a copy of all supported water mode tags
getTimePeriod() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Active time period
getTimePeriod() - Method in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Collect time period for which the initial costs are meant (might not be set)
getTimePeriodAgnosticCosts() - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Provide the time period agnostic costs
getTimePeriodCosts(TimePeriod) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: The time period specific costs available
getTimePeriodExternalId(TimePeriod) - Static method in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty: Returns the current time period external Id
getTimePeriodId(TimePeriod) - Static method in class org.goplanit.output.property.TimePeriodIdOutputProperty: Returns the current time period Id
getTimePeriods() - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: The registered time periods that have initial costs
getTimePeriodXmlId(TimePeriod) - Static method in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty: Returns the current time period xml Id
getTopologicallySortedVertices() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Topologically sorted vertices of the bush
getTotalNumberOfNetworkSegments() - Method in class org.goplanit.assignment.TrafficAssignment: Total number of edge segments across the entire network and all layers (physical and virtual)
getTotalNumberOfNetworkVertices() - Method in class org.goplanit.assignment.TrafficAssignment: Total number of vertices across the entire network (physical and virtual) and all layers
getTotalSendingFlowPcuH(EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Total sending flows s_a from given segment
getTrackedNodes() - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Collect all registered potentially blocking nodes
getTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Collect all registered potentially blocking nodes
getTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Collect all registered potentially blocking nodes
getTrackType() - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl
getTrackType() - Method in interface org.goplanit.utils.mode.PhysicalModeFeatures: collect the track type of this mode
getTrafficAssignmentComponent(Class<T>) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: collect a component based on its class component signature key
getTrafficAssignmentComponent(Class<T>) - Method in class org.goplanit.assignment.TrafficAssignment: Collect the desired traffic assignment component by its class assuming it is available on the assignment.
getTrafficAssignmentComponent(Class<T>) - Method in interface org.goplanit.interactor.TrafficAssignmentComponentAccessee: Collect the desired traffic assignment component by its class assuming it is available on the assignment.
getTransferZoneByOsmId(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Find transfer zone either incomplete or complete by osm is
getTransferZoneGroupByOsmId(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: collect a parsed transfer zone group by OSM id
getTransferZoneGroupHelper() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get the transfer zone group parser
getTransferZoneGroupIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for transfer zone groups
getTransferZoneGroups() - Method in interface org.goplanit.utils.zoning.TransferZone: All transfer zone groups the transfer zone resides in (unmodifiable)
getTransferZoneGroups() - Method in class org.goplanit.zoning.TransferZoneImpl: All transfer zone groups the transfer zone resides in (unmodifiable)
getTransferZoneHelper() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get the transfer zone parser
getTransferZoneId() - Method in interface org.goplanit.utils.zoning.TransferZone: In addition to a zone id across all zones of any derived type, each transfer zone also has a unique id across the transfer zones specifically
getTransferZoneId() - Method in class org.goplanit.zoning.TransferZoneImpl: In addition to a zone id across all zones of any derived type, each transfer zone also has a unique id across the transfer zones specifically
getTransferZoneIdClass() - Method in interface org.goplanit.utils.zoning.TransferZone
getTransferZones() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: create a view of the registered transfer zones.
getTransferZones() - Method in class org.goplanit.zoning.TransferZoneGroupImpl: create a view of the registered transfer zones.
getTransferZones() - Method in class org.goplanit.zoning.Zoning: Access to the odZones container
getTransferZonesByOsmId(EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect the transfer zones by entity type, unmodifiable
getTransferZonesSpatially(Envelope) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Collect the transfer zones by spatial bounding box.
getTransferZoneStationName(TransferZone) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Collect the station name for a transfer zone (if any)
getTransferZoneType() - Method in interface org.goplanit.utils.zoning.TransferZone: collect the type of this transfer zone
getTransferZoneType() - Method in class org.goplanit.zoning.TransferZoneImpl: collect the type of this transfer zone
getTransportLayers() - Method in class org.goplanit.network.TransportLayerNetwork: Collect the transport layers
getTransportNetwork() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Get the transport model network
getTransportNetwork() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: The transport model network used
getTransportNetwork() - Method in class org.goplanit.assignment.TrafficAssignment: Get the TransportNetwork used in the current assignment
getTravelDemandPcuH() - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect the total travel demand for this origin bush
getTravelerType() - Method in class org.goplanit.userclass.UserClass: Get the traveler type of this user class
getTravelTimeCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, MacroscopicLinkSegment) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, ConnectoidSegment) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Returns the generalised cost of travel along an edge segment for a specified mode
getTravelTimeCost(Mode, T) - Method in interface org.goplanit.cost.Cost: Returns the generalised cost of travel along an edge segment for a specified mode
getTripId() - Method in class org.goplanit.gtfs.model.GtfsTrip: Get the trip id
getTripInfo() - Method in interface org.goplanit.service.routed.RoutedService: Access to the trips available for this service
getTripInfo() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Access to the trips available for this service
getTupleSeparator() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Separator to use for tuples of coordinates that are being persisted
getTurnSendingFlow(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Collect bush turn sending flow (if any)
getTurnSendingFlowPcuH(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Get the turn sending flow for a given turn
getTurnSendingFlows() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: Access to the used turn sending flows
getType() - Method in interface org.goplanit.utils.event.Event: returns the type of the event.
getType() - Method in class org.goplanit.utils.event.EventImpl: returns the type of the event.
getType() - Method in interface org.goplanit.utils.zoning.Connectoid: The type of the connectoid
getType() - Method in class org.goplanit.zoning.ConnectoidImpl: The type of the connectoid
getTypeDescription() - Method in interface org.goplanit.converter.ConverterEntity: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.demands.DemandsReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.demands.DemandsWriter: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.intermodal.IntermodalReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.intermodal.IntermodalWriter: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.network.NetworkReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.network.NetworkWriter: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.service.RoutedServicesReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.service.ServiceNetworkReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.zoning.ZoningReader: short description (one word capitals) of this reader for logging purposes
getTypeDescription() - Method in interface org.goplanit.converter.zoning.ZoningWriter: short description (one word capitals) of this reader for logging purposes
getUndirectedConnectoidId() - Method in interface org.goplanit.utils.zoning.UndirectedConnectoid: collect the undirected connectoid id
getUndirectedConnectoidId() - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: collect the undirected connectoid's unique id
getUndirectedConnectoidIdClass() - Method in interface org.goplanit.utils.zoning.UndirectedConnectoid: the class for undirected connectoid id generation
getUnprocessedPtv1Stations(EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: collect the Ptv1 stations that have been identified but not processed yet (unmodifiable)
getUnprocessedPtv2Stations(EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: collect unprocces ptv2 stations (unmodifiable)
getUnprocessedStation(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Collect an unprocessed station if it exists
getUnprocessedStopPositions() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: collect unprocessed stop positions
getUntypedDirectedGraph() - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Access to directed graph we are modifying
getUpstreamNode() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Collect upstream vertex as node
getUpstreamNodeExternalId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the external Id of the upstream node
getUpstreamNodeId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the Id of the upstream node
getUpstreamNodeLocation(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the location of the upstream node
getUpstreamNodeXmlId(T) - Method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: Returns the XML Id of the upstream node
getUpstreamVertex() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Get the segment's upstream vertex
getUpstreamVertex() - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Get the segment's upstream vertex
getUpstreamVertex() - Method in interface org.goplanit.utils.graph.EdgeSegment: Get the segment's upstream vertex
getUpstreamVertex() - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Get the segment's upstream vertex
getUrbanHighwayDefaults() - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults
getUsedNetworkLayer() - Method in class org.goplanit.assignment.ltm.LtmAssignment: The used network layer
getUsedNetworkLayer() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Convenience method to collect the used layer for this loading
getUsedReceivingFlows() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: The receiving flows used
getUseFeatures() - Method in class org.goplanit.mode.ModeImpl: collect the features of how this mode is used (public, private etc.)
getUseFeatures() - Method in interface org.goplanit.utils.mode.Mode: collect the features of how this mode is used (public, private etc.)
getUseOfType() - Method in class org.goplanit.mode.UsabilityModeFeaturesImpl: collect how this mode is used via this type, e.g.
getUseOfType() - Method in interface org.goplanit.utils.mode.UsabilityModeFeatures: collect how this mode is used via this type, e.g.
getUserClassByXmlId(String) - Method in class org.goplanit.demands.Demands.UserClasses: Retrieve a UserClass by its XML Id This method is not efficient, since it loops through all the registered user classes in order to find the required entry.
getValue() - Method in enum org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme: The value of the type
getValue(long, long) - Method in interface org.goplanit.utils.od.OdData: Returns the value for a specified origin and destination by their internal id
getValue(long, long) - Method in class org.goplanit.utils.od.OdHashedImpl: Returns the value for a specified origin and destination by their internal id
getValue(long, long) - Method in class org.goplanit.utils.od.OdNonPrimitiveMatrix: Returns the value for a specified origin and destination by their internal id
getValue(long, long) - Method in class org.goplanit.utils.od.OdPrimitiveMatrix: Returns the value for a specified origin and destination by their internal id
getValue(Zone, Zone) - Method in interface org.goplanit.utils.od.OdData: Returns the value for a specified origin and destination
getValue(Zone, Zone) - Method in class org.goplanit.utils.od.OdHashedImpl: Returns the value for a specified origin and destination
getValue(Zone, Zone) - Method in class org.goplanit.utils.od.OdNonPrimitiveMatrix: Returns the value for a specified origin and destination
getValue(Zone, Zone) - Method in class org.goplanit.utils.od.OdPrimitiveMatrix: Returns the value for a specified origin and destination
getValueForSupportedRefKeys(Map<String, String>) - Static method in class org.goplanit.osm.util.OsmTagUtils: Collect the value for the first "ref" related key tag that we support.
getValues() - Method in interface org.goplanit.data.MultiKeyPlanItDataIterator: Returns an array of values for the current iteration
getValues() - Method in class org.goplanit.data.MultiKeyPlanItDataIteratorImpl: Returns an array of values for the current iteration
getValues() - Method in class org.goplanit.output.formatter.MemoryOutputIterator: Returns an array of values for the current iteration
getValueToKey() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Collect the function used to map value to key
getVehicularType() - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl
getVehicularType() - Method in interface org.goplanit.utils.mode.PhysicalModeFeatures: collect the vehicular type of this mode
getVersion() - Static method in class org.goplanit.io.xml.util.ApplicationProperties: collect version value
getVertexA() - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Vertex A of the edge
getVertexA() - Method in class org.goplanit.graph.EdgeImpl: Vertex A of the edge
getVertexA() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Vertex A of the edge
getVertexA() - Method in interface org.goplanit.utils.graph.Edge: Vertex A of the edge
getVertexB() - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Vertex B of the edge
getVertexB() - Method in class org.goplanit.graph.EdgeImpl: Vertex B of the edge
getVertexB() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Vertex B of the edge
getVertexB() - Method in interface org.goplanit.utils.graph.Edge: Vertex B of the edge
getVertexData(DirectedVertex) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Collect vertex data for given vertex
getVertexIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for nodes
getVertexLocationAsString(Vertex) - Static method in interface org.goplanit.output.adapter.UntypedLinkOutputTypeAdapter: collect location as string representation from vertex
getVertexToBreakAt() - Method in class org.goplanit.graph.modifier.event.BreakEdgeEvent: Collect vertex to break at
getVertexToBreakAt() - Method in class org.goplanit.graph.modifier.event.BreakEdgeSegmentEvent: collect vertex to break at
getVertices() - Method in class org.goplanit.graph.UntypedGraphImpl: collect vertices of graph
getVertices() - Method in interface org.goplanit.utils.graph.UntypedGraph: collect vertices of graph
getVirtualCost() - Method in class org.goplanit.assignment.TrafficAssignment: Returns the virtual cost object for the current assignment
getVirtualCost() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Collect the virtual cost entity registered on the traffic assignment
getVirtualCostClassName() - Method in class org.goplanit.output.adapter.OutputAdapter: Return the name of the virtual cost class
getVirtualNetwork() - Method in class org.goplanit.network.transport.TransportModelNetwork: Collect the virtual network component of the transport network
getVirtualNetwork() - Method in class org.goplanit.zoning.Zoning: Get the virtual network for this zoning
getWaitingAreaNominatedOsmWayForStopLocation(Number, EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: collect waiting area's osm way id to use for identifying most logical stop_location (connectoid)
getWorkingDirUri() - Static method in class org.goplanit.utils.misc.UriUtils: Collect working directory as URI
getWriter() - Method in class org.goplanit.converter.ConverterBase: get the writer
getWriter() - Method in class org.goplanit.converter.network.NetworkConverter: get the writer
getWriter() - Method in class org.goplanit.converter.zoning.ZoningConverter: get the writer
getX(OsmNode) - Static method in class org.goplanit.osm.util.OsmNodeUtils: collect x coordinate based on mapping between long/lat/ x/y
getXmlFileExtension() - Method in class org.goplanit.io.xml.util.PlanitXmlReaderSettings: the XML extension used to check for within path directory used
getXmlFileName(OutputType) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Returns the XML output file name for a specified output type
getXmlFileName(OutputType) - Method in interface org.goplanit.output.formatter.XmlTextFileOutputFormatter: Returns the XML output file name for a specified output type
getXmlId() - Method in class org.goplanit.component.PlanitComponent: the id exposed to users as the "normal" id in the PLANit native xml format
getXmlId() - Method in interface org.goplanit.utils.id.ExternalIdAble: the id exposed to users as the "normal" id in the PLANit native xml format
getXmlId() - Method in class org.goplanit.utils.id.ExternalIdAbleImpl: the id exposed to users as the "normal" id in the PLANit native xml format
getXmlRootElement() - Method in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Collect the root element of this reader
getY(OsmNode) - Static method in class org.goplanit.osm.util.OsmNodeUtils: collect x coordinate based on mapping between long/lat/ x/y
getZone(long) - Method in class org.goplanit.zoning.Zoning: find a zone by over arching id regardless if it is a transfer or Od zone
getZoneIdMapper() - Method in class org.goplanit.io.converter.PlanitWriterImpl: get id mapper for zones
getZoning() - Method in class org.goplanit.assignment.TrafficAssignment: Get the zoning for the current assignment
getZoning() - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: collect the registered zoning
getZoning() - Method in class org.goplanit.io.project.PlanItSimpleProject: Return the current Zoning object
getZoning() - Method in class org.goplanit.network.transport.TransportModelNetwork: Collect the zoning structure
getZoning() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Collect zoning
getZoningModifier() - Method in class org.goplanit.zoning.Zoning: The zoning's modifier instance
getZoningReaderData() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Get zoning reader data
getZoningSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: provide access to the zoning reader settings
getZoningSettings() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Collect zoning settings
getZoningSettings() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Collect zoning settings
getZoningToPopulate() - Method in class org.goplanit.component.event.PopulateZoningEvent: Collect PLANit zoning to populate
getZoningToPopulate() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings
GLOBAL - Static variable in class org.goplanit.utils.locale.CountryNames: can be used in case one wants to have country specific data store by country, but a default in case no country is known/available is also required
GLOBAL_DEFAULT_HIGHWAY_SPEEDLIMIT_KMH - Static variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: in absence of OSM default, we create a global highway speed limit (km/h) available
GLOBAL_DEFAULT_MAXIMUM_SPEED_KMH - Static variable in interface org.goplanit.utils.mode.Mode: Default max speed in km/h
GLOBAL_DEFAULT_PCU - Static variable in interface org.goplanit.utils.mode.Mode: Default pcu in pcu
GLOBAL_DEFAULT_RAILWAY_SPEEDLIMIT_KMH - Static variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: in absence of OSM defined defaults, we make a global rail way speed limit (km/h) available
GLOBAL_SPEED_LIMIT_DEFAULTS - Static variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: store the global railway defaults as fall back option
globalModeAccessDefaults - Static variable in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: store the global defaults as fall back option
GOLF_CART - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: golf cart vehicles
GOODS - org.goplanit.utils.mode.UseOfModeType
GOODS - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: goods vehicle part of goods category type, smaller than 3.5 tonnes
GOODS_VEHICLE - org.goplanit.utils.mode.PredefinedModeType
GoodsMode - Class in org.goplanit.mode: the predefined goods vehicle mode, i.e., truck below 3.5 tonnes name: gv maxspeed (km/h): 100 pcu: 1.8 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: GOODS
GoodsMode(IdGroupingToken) - Constructor for class org.goplanit.mode.GoodsMode: Constructor for heavy goods vehicle mode
Graph<V extends Vertex,E extends Edge> - Interface in org.goplanit.utils.graph: Interface for a graph with explicit container types rather than the base containers.
GRAPH_ID_CLASS - Static variable in interface org.goplanit.utils.graph.UntypedGraph: id class for generating ids
GraphEntities<E extends GraphEntity> - Interface in org.goplanit.utils.graph: Container class for any graph entities and a factory to create them
GraphEntitiesImpl<E extends GraphEntity> - Class in org.goplanit.graph: Base class for containers of entities on graph
GraphEntitiesImpl(Function<E, Long>) - Constructor for class org.goplanit.graph.GraphEntitiesImpl: Constructor
GraphEntitiesImpl(GraphEntitiesImpl<E>) - Constructor for class org.goplanit.graph.GraphEntitiesImpl: copy constructor
GraphEntity - Interface in org.goplanit.utils.graph: Placeholder interface for all graph entities.
GraphEntityFactory<E extends GraphEntity> - Interface in org.goplanit.utils.graph: A base abstract class for factories that create graph entities on an underlying container No specification of the container here because it is used as a placeholder to be able to let derived classes implement this interface with as much freedom as possible.
GraphEntityFactoryImpl<E extends GraphEntity> - Class in org.goplanit.graph: Base implementation for creating and registering graph entities on underlying container and conducting changes to ids based on the factory settings for egenrating ids.
GraphEntityFactoryImpl(IdGroupingToken, GraphEntities<E>) - Constructor for class org.goplanit.graph.GraphEntityFactoryImpl: Constructor
GraphEntityImpl - Class in org.goplanit.graph: Base implementation for graph entity (edge, vertex, etc.)
GraphEntityImpl(GraphEntityImpl) - Constructor for class org.goplanit.graph.GraphEntityImpl: Copy constructor
GraphEntityImpl(IdGroupingToken, Class<? extends GraphEntity>) - Constructor for class org.goplanit.graph.GraphEntityImpl: Constructor
GraphImpl<V extends Vertex,E extends Edge> - Class in org.goplanit.graph: A graph implementation consisting of vertices and edges
GraphImpl(GraphImpl<V, E>) - Constructor for class org.goplanit.graph.GraphImpl: Copy constructor for shallow copy
GraphImpl(IdGroupingToken, GraphEntities<V>, GraphEntities<E>) - Constructor for class org.goplanit.graph.GraphImpl: Graph Constructor
GraphModificationEvent - Interface in org.goplanit.utils.graph.modifier.event: Interface for the group of events that are used around graph modification
graphModifier - Variable in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: the graph modifier to use to apply larger modifications
GraphModifier<V extends Vertex,E extends Edge> - Interface in org.goplanit.utils.graph.modifier: Modify graph elements
GraphModifierEventProducer - Interface in org.goplanit.utils.graph.modifier.event: Interface dedicated to the GraphModifier event related exposed methods.
GraphModifierEventType - Class in org.goplanit.utils.graph.modifier.event: graph modifier event type class.
GraphModifierEventType(String) - Constructor for class org.goplanit.utils.graph.modifier.event.GraphModifierEventType: Constructor
GraphModifierImpl - Class in org.goplanit.graph.modifier: Apply modifications to the graph in an integrated fashion.
GraphModifierImpl(UntypedGraph<?, ?>) - Constructor for class org.goplanit.graph.modifier.GraphModifierImpl: Constructor
GraphModifierListener - Interface in org.goplanit.utils.graph.modifier.event: To serve as base listener class for all graph modification events, where its onX method provides any graph modification event as parameter
GRENADA - Static variable in class org.goplanit.utils.locale.CountryNames
group - Variable in enum org.goplanit.utils.unit.UnitType
groupId - Variable in class org.goplanit.component.PlanitComponentBuilder: id grouping token
groupIdToken - Variable in class org.goplanit.utils.id.ManagedIdEntityFactoryImpl: the id group token
GroupUnit - Class in org.goplanit.utils.unit: A combined unit consisting of multiple simple (single) units
GroupUnit(GroupUnit, SimpleUnit...) - Constructor for class org.goplanit.utils.unit.GroupUnit: Constructor
GroupUnit(SimpleUnit...) - Constructor for class org.goplanit.utils.unit.GroupUnit: Constructor
GtfsAgenciesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS agencies, namely an agency.txt file and a GtfsAgency in memory object to go with each entry
GtfsAgenciesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsAgenciesScheme: Default constructor
GtfsAgency - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in agency.txt
GtfsAgency() - Constructor for class org.goplanit.gtfs.model.GtfsAgency
GtfsAttribution - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in attributions.txt
GtfsAttribution() - Constructor for class org.goplanit.gtfs.model.GtfsAttribution
GtfsAttributionsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS attributions, namely an attributions.txt file and a GtfsAttribution in memory object to go with each entry
GtfsAttributionsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsAttributionsScheme: Default constructor
GtfsCalendar - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in calendar.txt
GtfsCalendar() - Constructor for class org.goplanit.gtfs.model.GtfsCalendar
GtfsCalendarDate - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in calendar_dates.txt
GtfsCalendarDate() - Constructor for class org.goplanit.gtfs.model.GtfsCalendarDate
GtfsCalendarDatesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS calendar dates, namely a calendar_dates.txt file and a GtfsCalendarDate in memory object to go with each entry
GtfsCalendarDatesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsCalendarDatesScheme: Default constructor
GtfsCalendarsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS calendars, namely a calendar.txt file and a GtfsCalendar in memory object to go with each entry
GtfsCalendarsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsCalendarsScheme: Default constructor
GtfsFareAttribute - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in fare_attributes.txt
GtfsFareAttribute() - Constructor for class org.goplanit.gtfs.model.GtfsFareAttribute
GtfsFareAttributesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS fare attributes, namely a fare_attributes.txt file and a GtfsFareAttribute in memory object to go with each entry
GtfsFareAttributesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsFareAttributesScheme: Default constructor
GtfsFareRule - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in fare_rules.txt
GtfsFareRule() - Constructor for class org.goplanit.gtfs.model.GtfsFareRule
GtfsFareRulesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS fare rules, namely a fare_rules.txt file and a GtfsFareRule in memory object to go with each entry
GtfsFareRulesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsFareRulesScheme: Default constructor
GtfsFeedInfo - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in feed_info.txt
GtfsFeedInfo() - Constructor for class org.goplanit.gtfs.model.GtfsFeedInfo
GtfsFeedInfoScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS fare rules, namely a fare_rules.txt file and a GtfsFareRule in memory object to go with each entry
GtfsFeedInfoScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsFeedInfoScheme: Default constructor
GtfsFileConditions - Class in org.goplanit.gtfs.util: Class indicating conditions regarding the presence of the GTFS file type
GtfsFileConditions(GtfsFileTypePresence, GtfsFileType, GtfsFileType) - Constructor for class org.goplanit.gtfs.util.GtfsFileConditions: Constructor
GtfsFileHandler<T extends GtfsObject> - Class in org.goplanit.gtfs.handler: A file handler base class to handle callbacks for a particular GTFS file type
GtfsFileHandler(GtfsFileScheme) - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandler: Constructor
GtfsFileHandlerAgency - Class in org.goplanit.gtfs.handler: Base handler for handling agencies
GtfsFileHandlerAgency() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerAgency: Constructor
GtfsFileHandlerAttributions - Class in org.goplanit.gtfs.handler: Base handler for handling attributions
GtfsFileHandlerAttributions() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerAttributions: Constructor
GtfsFileHandlerCalendarDates - Class in org.goplanit.gtfs.handler: Base handler for handling calendar dates
GtfsFileHandlerCalendarDates() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerCalendarDates: Constructor
GtfsFileHandlerCalendars - Class in org.goplanit.gtfs.handler: Base handler for handling (service) calendars
GtfsFileHandlerCalendars() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerCalendars: Constructor
GtfsFileHandlerFareAttributes - Class in org.goplanit.gtfs.handler: Base handler for handling fare attributes
GtfsFileHandlerFareAttributes() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerFareAttributes: Constructor
GtfsFileHandlerFareRules - Class in org.goplanit.gtfs.handler: Base handler for handling fare attributes
GtfsFileHandlerFareRules() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerFareRules: Constructor
GtfsFileHandlerFeedInfo - Class in org.goplanit.gtfs.handler: Base handler for handling feed information
GtfsFileHandlerFeedInfo() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerFeedInfo: Constructor
GtfsFileHandlerFrequencies - Class in org.goplanit.gtfs.handler: Base handler for handling frequencies
GtfsFileHandlerFrequencies() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerFrequencies: Constructor
GtfsFileHandlerLevels - Class in org.goplanit.gtfs.handler: Base handler for handling levels
GtfsFileHandlerLevels() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerLevels: Constructor
GtfsFileHandlerPathways - Class in org.goplanit.gtfs.handler: Base handler for handling pathways
GtfsFileHandlerPathways() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerPathways: Constructor
GtfsFileHandlerRoutes - Class in org.goplanit.gtfs.handler: Base handler for handling routes
GtfsFileHandlerRoutes() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerRoutes: Constructor
GtfsFileHandlerShapes - Class in org.goplanit.gtfs.handler: Base handler for handling shape attributes
GtfsFileHandlerShapes() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerShapes: Constructor
GtfsFileHandlerStops - Class in org.goplanit.gtfs.handler: Base handler for handling stops
GtfsFileHandlerStops() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerStops: Constructor
GtfsFileHandlerStopTimes - Class in org.goplanit.gtfs.handler: Base handler for handling stop times
GtfsFileHandlerStopTimes() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerStopTimes: Constructor
GtfsFileHandlerTransfers - Class in org.goplanit.gtfs.handler: Base handler for handling transfers
GtfsFileHandlerTransfers() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerTransfers: Constructor
GtfsFileHandlerTranslations - Class in org.goplanit.gtfs.handler: Base handler for handling translations
GtfsFileHandlerTranslations() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerTranslations: Constructor
GtfsFileHandlerTrips - Class in org.goplanit.gtfs.handler: Base handler for handling trips
GtfsFileHandlerTrips() - Constructor for class org.goplanit.gtfs.handler.GtfsFileHandlerTrips: Constructor
GtfsFileReaderAgencies - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS agencies
GtfsFileReaderAgencies(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderAgencies: Constructor
GtfsFileReaderAttributions - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS attributions entries
GtfsFileReaderAttributions(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderAttributions: Constructor
GtfsFileReaderBase - Class in org.goplanit.gtfs.reader: A GTFS file reader containing generic code for any GTFS file
GtfsFileReaderBase(GtfsFileScheme, URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderBase: Constructor using default gtfs reader settings
GtfsFileReaderBase(GtfsFileScheme, URL, GtfsFileReaderSettings) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderBase: Constructor
GtfsFileReaderCalendarDates - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS calendar date entries
GtfsFileReaderCalendarDates(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderCalendarDates: Constructor
GtfsFileReaderCalendars - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS calendar entries
GtfsFileReaderCalendars(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderCalendars: Constructor
GtfsFileReaderFareAttributes - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS fare attributes entries
GtfsFileReaderFareAttributes(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderFareAttributes: Constructor
GtfsFileReaderFareRules - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS fare rule entries
GtfsFileReaderFareRules(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderFareRules: Constructor
GtfsFileReaderFeedInfo - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS feed info entries
GtfsFileReaderFeedInfo(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderFeedInfo: Constructor
GtfsFileReaderFrequencies - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS frequencies
GtfsFileReaderFrequencies(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderFrequencies: Constructor
GtfsFileReaderLevels - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS levels
GtfsFileReaderLevels(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderLevels: Constructor
GtfsFileReaderPathways - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS pathways
GtfsFileReaderPathways(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderPathways: Constructor
GtfsFileReaderRoutes - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS routes
GtfsFileReaderRoutes(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderRoutes: Constructor
GtfsFileReaderSettings - Class in org.goplanit.gtfs.reader: General settings applicable to all GTFS file readers
GtfsFileReaderSettings() - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderSettings
GtfsFileReaderShapes - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS shapes entries
GtfsFileReaderShapes(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderShapes: Constructor
GtfsFileReaderStops - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS stops
GtfsFileReaderStops(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderStops: Constructor
GtfsFileReaderStopTimes - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS stop times
GtfsFileReaderStopTimes(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderStopTimes: Constructor
GtfsFileReaderTransfers - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS transfers entries
GtfsFileReaderTransfers(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderTransfers: Constructor
GtfsFileReaderTranslations - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS translation entries
GtfsFileReaderTranslations(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderTranslations: Constructor
GtfsFileReaderTrips - Class in org.goplanit.gtfs.reader: A GTFS file reader for parsing GTFS trips
GtfsFileReaderTrips(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsFileReaderTrips: Constructor
GtfsFileScheme - Class in org.goplanit.gtfs.scheme: Each GTFS file scheme represents on particular GTFS file and its mapping to an in memory GTFS object
GtfsFileScheme(GtfsFileType, GtfsObjectType) - Constructor for class org.goplanit.gtfs.scheme.GtfsFileScheme: Constructor
GtfsFileSchemeFactory - Class in org.goplanit.gtfs.scheme: Factory class to create most common GTFS file schemes
GtfsFileSchemeFactory() - Constructor for class org.goplanit.gtfs.scheme.GtfsFileSchemeFactory
GtfsFileType - Enum in org.goplanit.gtfs.enums: Supported GTFS file types and their corresponding (default) file name in which entries are expected to be found
GtfsFileTypePresence - Enum in org.goplanit.gtfs.enums: Options regarding the presence of a GTFS file type
GtfsFrequenciesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS frequencies, namely a frequencies.txt file and a GtfsFrequency in memory object to go with each entry
GtfsFrequenciesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsFrequenciesScheme: Default constructor
GtfsFrequency - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in frequencies.txt
GtfsFrequency() - Constructor for class org.goplanit.gtfs.model.GtfsFrequency
GtfsKeyType - Enum in org.goplanit.gtfs.enums: List of all available GTFS keys used in GTFS files
GtfsLevel - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in levels.txt
GtfsLevel() - Constructor for class org.goplanit.gtfs.model.GtfsLevel
GtfsLevelsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS levels, namely a levels.txt file and a GtfsLevel in memory object to go with each entry
GtfsLevelsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsLevelsScheme: Default constructor
GtfsObject - Class in org.goplanit.gtfs.model: Base class for any GTFS memory model object with key value pairs for the data
GtfsObject() - Constructor for class org.goplanit.gtfs.model.GtfsObject
GtfsObjectFactory - Class in org.goplanit.gtfs.model
GtfsObjectFactory() - Constructor for class org.goplanit.gtfs.model.GtfsObjectFactory
GtfsObjectType - Enum in org.goplanit.gtfs.enums: The available supported object types and their corresponding class.
GtfsPathway - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in pathways.txt
GtfsPathway() - Constructor for class org.goplanit.gtfs.model.GtfsPathway
GtfsPathwaysScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS pathways, namely a pathways.txt file and a GtfsPathway in memory object to go with each entry
GtfsPathwaysScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsPathwaysScheme: Default constructor
GtfsReader - Class in org.goplanit.gtfs.reader: Top level GTFS reader for one or more GTFS files.
GtfsReader(URL) - Constructor for class org.goplanit.gtfs.reader.GtfsReader: Constructor
GtfsReaderFactory - Class in org.goplanit.gtfs.reader: top level class to get things started.
GtfsReaderFactory() - Constructor for class org.goplanit.gtfs.reader.GtfsReaderFactory
GtfsRoute - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in routes.txt
GtfsRoute() - Constructor for class org.goplanit.gtfs.model.GtfsRoute
GtfsRoutesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS routes, namely a routes.txt file and a GtfsAgency in memory object to go with each entry
GtfsRoutesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsRoutesScheme: Default constructor
GtfsShape - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in shapes.txt
GtfsShape() - Constructor for class org.goplanit.gtfs.model.GtfsShape
GtfsShapesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS fare rules, namely a fare_rules.txt file and a GtfsFareRule in memory object to go with each entry
GtfsShapesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsShapesScheme: Default constructor
GtfsStop - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in stops.txt
GtfsStop() - Constructor for class org.goplanit.gtfs.model.GtfsStop
GtfsStopsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS stops, namely an stops.txt file and a GtfsStop in memory object to go with each entry
GtfsStopsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsStopsScheme: Default constructor
GtfsStopTime - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in stop_times.txt
GtfsStopTime() - Constructor for class org.goplanit.gtfs.model.GtfsStopTime
GtfsStopTimesScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS stop times, namely a stop_times.txt file and a GtfsStopTime in memory object to go with each entry
GtfsStopTimesScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsStopTimesScheme: Default constructor
GtfsTransfer - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in transfers.txt
GtfsTransfer() - Constructor for class org.goplanit.gtfs.model.GtfsTransfer
GtfsTransfersScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS transfers, namely a transfers.txt file and a GtfsTransfer in memory object to go with each entry
GtfsTransfersScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsTransfersScheme: Default constructor
GtfsTranslation - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in translations.txt
GtfsTranslation() - Constructor for class org.goplanit.gtfs.model.GtfsTranslation
GtfsTranslationsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS translations, namely a translations.txt file and a GtfsTranslation in memory object to go with each entry
GtfsTranslationsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsTranslationsScheme: Default constructor
GtfsTrip - Class in org.goplanit.gtfs.model: In memory representation of a GTFS entry in trips.txt
GtfsTrip() - Constructor for class org.goplanit.gtfs.model.GtfsTrip
GtfsTripsScheme - Class in org.goplanit.gtfs.scheme: The scheme used for GTFS trips, namely a trips.txt file and a GtfsTrip in memory object to go with each entry
GtfsTripsScheme() - Constructor for class org.goplanit.gtfs.scheme.GtfsTripsScheme: Default constructor
GtfsUtils - Class in org.goplanit.gtfs.util: general utilities specific to this GTFS API
GtfsUtils() - Constructor for class org.goplanit.gtfs.util.GtfsUtils
GUERNSEY - Static variable in class org.goplanit.utils.locale.CountryNames
GUYANA - Static variable in class org.goplanit.utils.locale.CountryNames
GV_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.GoodsMode
GV_USABLITY_FEATURES - Static variable in class org.goplanit.mode.GoodsMode

H

HALT - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a halt tag used frequently under PTv1 i.c.w.
handle(OsmNode) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: construct PLANit nodes from OSM nodes
handle(OsmNode) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: Construct PLANit nodes/connectoids/transferzones from OSM nodes when relevant
handle(OsmRelation) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPostProcessingHandler
handle(OsmRelation) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPreProcessingHandler
handle(OsmRelation) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler
handle(OsmWay) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: parse an osm way to extract link and link segments (including type).
handle(OsmWay) - Method in class org.goplanit.osm.converter.network.OsmNetworkPreProcessingHandler: for all OSM ways that are explicitly marked for inclusion despite falling outside the bounding polygon we extract their nodes and mark them for inclusion as exceptions to the bounding polygon filter that is applied during the main parsing pass in the regular PlanitOsmNetworkHandler
handle(OsmWay) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: parse an osm way to extract for example platforms, or other transfer zone related geometry
handle(GtfsAgency) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerAgency: Handle a GTFS agency
handle(GtfsAttribution) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerAttributions: Handle a GTFS attributions
handle(GtfsCalendar) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerCalendars: Handle a GTFS calendar
handle(GtfsCalendarDate) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerCalendarDates: Handle a GTFS calendar date
handle(GtfsFareAttribute) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerFareAttributes: Handle a GTFS fare attribute
handle(GtfsFareRule) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerFareRules: Handle a GTFS fare rule
handle(GtfsFeedInfo) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerFeedInfo: Handle a GTFS feed info
handle(GtfsFrequency) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerFrequencies: Handle a GTFS frequency
handle(GtfsLevel) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerLevels: Handle a GTFS level
handle(GtfsPathway) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerPathways: Handle a GTFS pathway
handle(GtfsRoute) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerRoutes: Handle a GTFS route
handle(GtfsShape) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerShapes: Handle a GTFS shape rule
handle(GtfsStop) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerStops: Handle a GTFS stop
handle(GtfsStopTime) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerStopTimes: Handle a GTFS stop time
handle(GtfsTransfer) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerTransfers: Handle a GTFS transfer
handle(GtfsTranslation) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerTranslations: Handle a GTFS translation
handle(GtfsTrip) - Method in class org.goplanit.gtfs.handler.GtfsFileHandlerTrips: Handle a GTFS trip
handle(T) - Method in class org.goplanit.gtfs.handler.GtfsFileHandler: Handle GTFS object of type T
handleRaw(GtfsObject) - Method in class org.goplanit.gtfs.handler.GtfsFileHandler: Handle raw GTFS object, cast to T and then delegate to handle
hasAccessLinkSegment() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: Verify if an access link segment is present
hasAccessZone(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: Check if zone is registered as access zone
hasAccessZone(Zone) - Method in class org.goplanit.zoning.ConnectoidImpl: Check if zone is registered as access zone
hasAccessZones() - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if access zones are registered
hasActiveSubOutputTypes() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Indicates if sub output types are present or not
hasAllowedModes() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Verify if the link segment type has any modes available
hasAnyDirectedConnectoidsForLocation(Point) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Check if any connectoids have been registered for the given location on any layer
hasAnyMappedPlanitMode(String...) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if any of the passed in osmModes are mapped, i.e., if it is actively included when reading the network
hasAnyMappedPlanitMode(Collection<String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if any of the passed in osmModes are mapped, i.e., if it is actively included when reading the network
hasAnyMappedPlanitModeOtherThan(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Verify if any mode other than the passed in osm mode is active
hasBoundingPolygon() - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set a polygon based bounding box to restrict parsing to
hasCentroid() - Method in interface org.goplanit.utils.zoning.Zone: verify if centroid is present
hasConnectoids(TransferZone) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Verify if transfer zone has connectoids present
hasConverged(double, int) - Method in class org.goplanit.gap.StopCriterion: Check if converged based on the gap and the internal information
hasConverged(int) - Method in class org.goplanit.gap.GapFunction: Verify if algorithm has converged
hasDirectedConnectoidForLocation(TransportLayer, Point) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Check if any connectoid has been registered for the given location for this layer
hasEdgeSegmentAb() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Verify if edge segment BA exists
hasEdgeSegmentBa() - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Verify if edge segment BA exists
hasEligibleModes() - Method in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: Verify if any eligible modes are present
hasEligibleOsmMode(Pair<Collection<String>, Collection<Mode>>) - Static method in class org.goplanit.osm.util.OsmModeUtils: Check to see if pair with eligible modes contains any eligible OSM mode
hasEntryEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Test whether no entry edge segments have been registered
hasExitEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Test whether no exit edge segments have been registered
hasExplicitlyAllowedModes(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if any modes are allowed for this zone
hasExplicitlyExcludedSidewalkOrFootway(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPedestrianTags: verify from the passed in tags if a side walk or footway is present that is not accesible to pedestrians based on sidewalk= no none separate
hasExplicitlyIncludedSidewalkOrFootway(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPedestrianTags: Verify from the passed in tags if a side walk or footway is present that is accessible to pedestrians sidewalk= yes both left right or footway=sidewalk
hasExplicitSidewalkOrFootwayWithAccessValue(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmPedestrianTags: Verify from the passed in tags if a side walk or footway osmkey is present with any of these value tags
hasExternalId() - Method in interface org.goplanit.utils.id.ExternalIdAble: check if external id is available or not
hasFrequencyBasedTrips() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Verify if any frequency based trips exists
hasGeometry() - Method in class org.goplanit.network.layer.service.ServiceLegImpl
hasGeometry() - Method in interface org.goplanit.utils.graph.Edge: check if geometry is available
hasGeometry() - Method in interface org.goplanit.utils.zoning.Zone: verify if the zone has a geometry
hashCode() - Method in class org.goplanit.component.PlanitComponent
hashCode() - Method in class org.goplanit.output.property.OutputProperty: Overridden hashCode() method This method is needed to allow output properties to be removed from the output list if required.
hashCode() - Method in class org.goplanit.utils.event.EventType: Hash code based on name
hashCode() - Method in class org.goplanit.utils.id.IdAbleImpl
hashCode() - Method in class org.goplanit.utils.id.IdGroupingToken
hashCode() - Method in class org.goplanit.utils.misc.Pair
hashCode() - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Return the hashCode for this object
hasHighwayKeyTag(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: Verify if tags contain the highway key
hasHost(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: Verify if the URL has a host specified
HashUtils - Class in org.goplanit.utils.misc: Common location to provide some utilities for common hashing tasks
HashUtils() - Constructor for class org.goplanit.utils.misc.HashUtils
hasInputProperty(String) - Method in interface org.goplanit.utils.zoning.Zone: Verify if input property exists
hasKeepOsmNodesOutsideBoundingPolygon() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: check if any OSM nodes are marked for keeping outside bounding polygon
hasKeepOsmWaysOutsideBoundingPolygon() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: check if any OSM ways are marked for keeping outside bounding polygon
hasKnownSupportedEventTypes() - Method in interface org.goplanit.utils.event.EventListener: Check if explicitly supported event types are available.
hasLegSegmentAb() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: verify if leg Segment Ab is present
hasLegSegmentBa() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: verify if LegSegment BA is present
hasLegSegments() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Verify if there are leg segments registered
hasLength(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if a length has been specified for the access zone to connectoid combination
hasLink(long) - Method in interface org.goplanit.utils.network.layer.physical.Links: verify if link is present
hasLinkSegmentAb() - Method in interface org.goplanit.utils.network.layer.physical.Link: verify if linkSegment Ab is present
hasLinkSegmentBa() - Method in interface org.goplanit.utils.network.layer.physical.Link: verify if linkSegment Ba is present
hasLinkSegmentType() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Verify if link segment type is present on the link segment
hasListener(EventType) - Method in class org.goplanit.utils.event.EventProducerImpl: Verify if one or more listeners are registered for given event type
hasListeners() - Method in class org.goplanit.utils.event.EventProducerImpl: Verify if any listeners are available
hasMappedPlanitMode(String) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if the passed in osmMode is mapped (either to road or rail mode), i.e., if it is actively included when reading the network
hasMappedPlanitMode(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Verify if the passed in osmMode is mapped to a mode, i.e., if it is actively included when reading the network
hasMappedPlanitMode(Pair<Collection<String>, Collection<Mode>>) - Static method in class org.goplanit.osm.util.OsmModeUtils: Check to see if pair with eligible modes contains any mapped PLANit mode
hasName() - Method in interface org.goplanit.utils.graph.Edge: Verify if a name has been set
hasName() - Method in interface org.goplanit.utils.mode.Mode: Verify if mode has a name
hasName() - Method in interface org.goplanit.utils.network.layer.physical.Link: verify if name is present on link
hasName() - Method in interface org.goplanit.utils.network.layer.service.ServiceLeg: Verify if name is present on leg
hasName() - Method in interface org.goplanit.utils.zoning.Centroid: check if a name has been set
hasName() - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if the connectoid has a name
hasName() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Verify if the group has a name already
hasName() - Method in interface org.goplanit.utils.zoning.Zone: Verify if a name has been set
hasNetworkLayersWithActiveOsmNode(long) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Verify if there exist any layers where the node is active either as an extreme node or internal to a PLANit link
hasNetworkLayersWithActiveOsmNode(long, TransportLayerNetwork<?, ?>, OsmNetworkReaderData) - Static method in class org.goplanit.osm.util.PlanitNetworkLayerUtils: Verify if there exist any layers where the node is active either as an extreme node or internal to a PLANit link
hasNetworkLayersWithActiveOsmNode(long, TransportLayerNetwork<?, ?>, OsmNetworkToZoningReaderData) - Static method in class org.goplanit.osm.util.PlanitNetworkLayerUtils: Verify if there exist any layers where the node is active either as an extreme node or internal to a PLANit link
hasNext() - Method in interface org.goplanit.data.MultiKeyPlanItDataIterator: Returns whether the MultiKeyPlanItData has any more rows
hasNext() - Method in class org.goplanit.data.MultiKeyPlanItDataIteratorImpl: Returns whether the MultiKeyPlanItData has any more rows
hasNext() - Method in class org.goplanit.output.formatter.MemoryOutputIterator: Returns whether the MemoryOutputFormatter has any more rows
hasNext() - Method in class org.goplanit.utils.od.OdHashedIterator: Tests whether there are any more cells to iterate through
hasNext() - Method in class org.goplanit.utils.od.OdMatrixIterator: Tests whether there are any more cells to iterate through
hasOrigins() - Method in class org.goplanit.assignment.ltm.sltm.Pas: Verify if PAS (still) has origins registered on it
hasOsmNode(long) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: Verify if osm node is available
hasOsmRelationOuterRoleOsmWays() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: check if outer role marked osm ways exist
hasOuterRoleOsmWay(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Verify if osm way id is registered that qualifies as an outer role on that relation
hasParentName() - Method in interface org.goplanit.utils.graph.EdgeSegment: verify if parent (edge) has a name
hasPath(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Check if path is present
hasPhysicalFeatures() - Method in interface org.goplanit.utils.mode.Mode: Verify if physical features are available
hasPosition() - Method in interface org.goplanit.utils.graph.Vertex: Verify if position is available
hasPtv1ValueTag(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: Verify if any of the tags is a macth for the currently supported Ptv1 scheme tags
hasPtv2ValueTag(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv2Tags: Verify if any of the tags is a match for the supported Ptv2 scheme tags
hasPublicTransportKeyTag(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv2Tags: Verify if tags contain "public_transport" key tag
hasRailwayKeyTag(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmRailwayTags: Verify if tags indicates this is a railway
hasRegisteredOdMatrices() - Method in class org.goplanit.path.OdPathSets: verify if any od path matrices have been registered or not
hasScheduleBasedTrips() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Verify if any schedule based trips exists
hasScheme(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Check if scheme is present
hasServiceLeg(long) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegs: verify if service leg is present
hasSupportedModes() - Method in interface org.goplanit.utils.network.layer.TransportLayer: Determine if layer contains any supported modes
hasTimePeriod() - Method in class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Verify if time period is set for this initial cost to populate
hasTransferZone(TransferZone) - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Verify if transfer zone is present
hasTransferZone(TransferZone) - Method in class org.goplanit.zoning.TransferZoneGroupImpl: Verify if transfer zone is present
hasTransferZoneGroup() - Method in interface org.goplanit.utils.zoning.TransferZone: Verify if a transfer zone is part of one or more transfer zone groups
hasTransferZoneGroup() - Method in class org.goplanit.zoning.TransferZoneImpl: Verify if a transfer zone is part of one or more transfer zone groups
hasTransferZones() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: verify if groups has any transfer zones registered
hasUnprocessedStopPosition(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Verify if unprocessed stop_position is registered
hasUseFeatures() - Method in interface org.goplanit.utils.mode.Mode: Verify if use features are available
hasValidFrequency() - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Verify if a valid frequency is defined, must be positive to be valid
hasVertex(Vertex) - Method in interface org.goplanit.utils.graph.Edge: check if vertex is present on the edge
hasWaitingAreaNominatedOsmWayForStopLocation(Number, EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if waiting area's osm id is marked for overwritten osm way mapping
hasXmlId() - Method in interface org.goplanit.utils.id.ExternalIdAble: check if external id is available or not
HEADWAY_SECS - org.goplanit.gtfs.enums.GtfsKeyType
HEAVY_GOODS - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: heavy goods vehicle part of goods category type, larger than 3.5 tonnes
HEAVY_GOODS_ARTICULATED - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motor car part of goods category type
HEAVY_GOODS_VEHICLE - org.goplanit.utils.mode.PredefinedModeType
HeavyGoodsMode - Class in org.goplanit.mode: the predefined heavy goods vehicle mode, i.e., truck over 3.5 tonnes name: hgv maxspeed (km/h): 90 pcu: 2.5 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: GOODS
HeavyGoodsMode(IdGroupingToken) - Constructor for class org.goplanit.mode.HeavyGoodsMode: Constructor for heavy goods vehicle mode
heuristicDistanceMultiplier - Variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: conversion multiplier to convert distance (km) to cost
HGV_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.HeavyGoodsMode
HGV_USABLITY_FEATURES - Static variable in class org.goplanit.mode.HeavyGoodsMode
HIGH - org.goplanit.utils.event.EventListenerPriority
HIGH_OCCUPANCY - org.goplanit.utils.mode.UseOfModeType
HIGH_OCCUPANCY_VEHICLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: group indicating any public service vehicle
HIGHWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
HONG_KONG - Static variable in class org.goplanit.utils.locale.CountryNames
HORSE - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags
HOUR - org.goplanit.tntp.enums.CapacityPeriod
HOUR - org.goplanit.utils.unit.UnitType
HOUR - Static variable in interface org.goplanit.utils.unit.Unit: predefined HOUR TimeUnit
HOUR_2_MINUTE - Static variable in class org.goplanit.utils.unit.TimeUnit: hour to minute conversion multiplier
HOUR_2_SECOND - Static variable in class org.goplanit.utils.unit.TimeUnit: hour to second conversion multiplier
HOURS - org.goplanit.tntp.enums.TimeUnits

I

id - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Unique internal id of the output writer
id - Variable in class org.goplanit.project.CustomPlanItProject: unique identifier for this project across all projects in the JVM
ID - org.goplanit.converter.IdMapperType
ID - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
ID - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
ID_PRIORITY - org.goplanit.output.property.OutputPropertyPriority
IdAble - Interface in org.goplanit.utils.id: A class implementing this interface signals that it is id-able
IdAbleImpl - Class in org.goplanit.utils.id: Implementation of Idable interface including hash and equals based on id
IdAbleImpl(long) - Constructor for class org.goplanit.utils.id.IdAbleImpl: constructor
IdAbleImpl(IdAbleImpl) - Constructor for class org.goplanit.utils.id.IdAbleImpl: Copy constructor
identifyDestinationCoordinateReferenceSystem(CoordinateReferenceSystem, String, CoordinateReferenceSystem) - Method in class org.goplanit.converter.BaseWriterImpl: identify what the destination Crs is supposed to be.
identifyInvalidTransferZoneAccessLinkSegmentsBasedOnRelativeLocationToInfrastructure(Collection<EdgeSegment>, TransferZone, Mode, boolean, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Find the access link segments ineligible given the intended location of the to be created connectoid, the transfer zone provided, and the access mode.
identifyPtv1DefaultMode(Map<String, String>) - Static method in class org.goplanit.osm.util.OsmModeUtils: If the tags contain Ptv1 related tagging, we use it to identify the most likely mode that is expected to be supported, highway=bus_stop gives bus highway=station gives bus highway=platform gives bus highway=platform_edge gives bus railway=station gives train railway=platform gives train railway=platform_edge gives train railway=halt gives train railway=stop gives train railway=tram_stop gives tram
identifyPtv1DefaultMode(Map<String, String>, String) - Static method in class org.goplanit.osm.util.OsmModeUtils: If the tags contain Ptv1 related tagging, we use it to identify the most likely mode that is expected to be supported, highway=bus_stop gives bus highway=station gives bus highway=platform gives bus highway=platform_edge gives bus railway=station gives train railway=platform gives train railway=platform_edge gives train railway=halt gives train railway=stop gives train railway=tram_stop gives tram
idEquals(Object) - Method in interface org.goplanit.utils.id.IdAble: equals based on id
IdGenerator - Class in org.goplanit.utils.id: Convenience class to track unique ids across different classes that decide to use a generator for their id members.
IdGenerator() - Constructor for class org.goplanit.utils.id.IdGenerator
IdGroupingToken - Class in org.goplanit.utils.id: Class used as token to group ids, i.e., ids for a class generated with this token will be unique within this group.
IdGroupingToken(String) - Constructor for class org.goplanit.utils.id.IdGroupingToken: Constructor
idHashCode() - Method in interface org.goplanit.utils.id.IdAble: Generate hash code based on id
idMapper - Variable in class org.goplanit.converter.BaseWriterImpl: the id mapper to use
idMapper - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: the id mapper to use
idMapper - Variable in class org.goplanit.matsim.converter.MatsimIntermodalWriter: the id mapper to use
IdMapperFunctionFactory - Class in org.goplanit.converter: Factory that creates functions for id mapping from PLANit ids to ids to be used for persistence.
IdMapperFunctionFactory() - Constructor for class org.goplanit.converter.IdMapperFunctionFactory
IdMapperType - Enum in org.goplanit.converter: Indicates which PLANit id to use for extracting ids on the output format.
includedOutsideBoundingPolygonOsmNodes - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Allow users to provide OSM node ids for nodes that we are not to keep even if they fall outside a bounding polygon
includedOutsideBoundingPolygonOsmWays - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Allow users to provide OSM way ids for ways that we are to keep even if they fall (partially) outside a bounding polygon, for example when we know the OSM way meanders in and outside the polygon and we want to have a connected network and proper lengths for this way
incomingEdgeSegment - Variable in class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: the preceding vertex to reach the vertex with the given measured cost
incomingLinkSegmentCapacities - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: store the capacities of each incoming link segment, i.e., C_a
incomingLinkSegmentFlowAcceptanceFactors - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModel: the result of the node model are the acceptance factors for each incoming link segment
incomingLinkSegments - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: mapping of incoming link index to link segment (if any), i.e., a=1,...|A^in|-1
increaseConvexityBound(double) - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Increase convexity bound cost, i.e.
increaseIndentation() - Method in class org.goplanit.matsim.converter.MatsimWriter: Increase indentation level
increaseMeasuredCost(double) - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Increase system cost, i.e.
increaseMeasuredValue(double[], double[]) - Method in class org.goplanit.gap.NormBasedGapFunction: Increase value by abs(value1-value2)^p, where p is the norm set.
increaseMeasuredValue(double, double) - Method in class org.goplanit.gap.NormBasedGapFunction: Increase value by abs(value1-value2)^p, where p is the norm set.
incrementIterationIndex() - Method in class org.goplanit.assignment.SimulationData: Increment iteration index by one
incrementMissingLaneCounter() - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: increment counter for missing lane information on parsed osmways/links
incrementMissingSpeedLimitCounter() - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: increment counter for missing speed limit information on parsed osmways/links
incrementMultiPolygonPlatformCounter() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: increment the counter that tracks the number of multi polygons identified as PT platforms
incrementOsmPtv1TagCounter(String) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: Increment counter for passed in osm tag regarding a Ptv1 value tag
incrementOsmPtv2TagCounter(String) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: Increment counter for passed in osm tag regarding a Ptv2 value tag
incrementOsmTagCounter(String) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: Increment counter for passed in osm tag
incrementOsmTagCounter(OsmPtVersionScheme, String) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: Increment counter for passed in osm tag regarding Ptv value tag
incrementPlatformRelationCounter() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: increment the counter that tracks the number of platform relations identified as PT platforms
indentLevel - Variable in class org.goplanit.matsim.converter.MatsimWriter: track indentation level
INDIA - Static variable in class org.goplanit.utils.locale.CountryNames
INDONESIA - Static variable in class org.goplanit.utils.locale.CountryNames
INFLOW - org.goplanit.output.property.OutputPropertyType
inFlowOutflowData - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: variables tracked for temporary inflow outflow tracking within sub algorithms
InflowOutflowData - Class in org.goplanit.assignment.ltm.sltm.loading: During sLTM loading we use temporary inflow and outflow rates resulting from node model updates.
InflowOutflowData(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: Constructor
InflowOutputProperty - Class in org.goplanit.output.property: Property to provide the Inflow rate in PCU/hour.
InflowOutputProperty() - Constructor for class org.goplanit.output.property.InflowOutputProperty
infrastructureNetwork - Variable in class org.goplanit.network.transport.TransportModelNetwork: Holds the infrastructure road network that is being modelled
INITIAL_GAP - Static variable in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: initial gap to use
initialCostsLocation - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: The location of the initial costs files
initialise(Modes) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: conduct general initialisation for any instance of this class
initialiseAndParseXmlRootElement(String, String) - Method in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Parse the raw XML root (and rest) from file if not already set via constructor
initialiseBeforeExecution() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Initialise the components before we start any assignment + create the assignment strategy (bush or path based)
initialiseBeforeExecution() - Method in class org.goplanit.assignment.TrafficAssignment: Initialize all relevant traffic assignment components before execution of the assignment commences
initialiseBeforeParsing() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Call this BEFORE we parse the OSM network to initialise the handler(s) properly
initialiseBeforeParsing() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Call this BEFORE we parse the OSM network to initialise the handler properly
initialiseBeforeParsing() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPostProcessingHandler: Call this BEFORE we parse the OSM network to initialise the handler properly
initialiseBeforeParsing() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPreProcessingHandler: Call this BEFORE we apply the handler
initialiseBeforeParsing() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: Call this before we parse the OSM network to initialise the handler properly
initialiseBeforeSimulation(long) - Method in class org.goplanit.output.OutputManager: Allows the output manager to initialize itself and any of its registered output formatters to prepare before the simulation starts
initialiseBeforeSimulation(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.cost.physical.AbstractPhysicalCost: Initialize the cost parameter values in the network
initialiseBeforeSimulation(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Register the BPR cost parameter values on the PhysicalNetwork
initialiseBeforeSimulation(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Initialize the cost parameter values in the network
initialiseBeforeSimulation(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Initialize the cost parameter values in the network
initialiseBeforeSimulation(VirtualNetwork) - Method in class org.goplanit.cost.virtual.AbstractVirtualCost: Initialize the virtual cost component
initialiseBeforeSimulation(VirtualNetwork) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Initialize the virtual cost component
initialiseBeforeSimulation(VirtualNetwork) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Initialize the virtual cost component
initialiseBeforeSimulation(OutputConfiguration, long) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Create the output directories and open the CSV writers
initialiseBeforeSimulation(OutputConfiguration, long) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Opens all resources used in the formatter
initialiseBeforeSimulation(OutputConfiguration, long) - Method in interface org.goplanit.output.formatter.OutputFormatter: Open resources to store results
initialiseBeforeSimulation(OutputConfiguration, long) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Open output CSV file for specified output type configuration.
InitialiseBushEdgeSegmentDemandConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: Initialise the bush for a given origin/destination with the shortest path being offered from the destination to the origin via the provided edge segments in the callback.
InitialiseBushEdgeSegmentDemandConsumer(Bush) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.InitialiseBushEdgeSegmentDemandConsumer: Constructor
initialiseDefaultActivatedOsmHighwayTypes() - Static method in class org.goplanit.osm.defaults.OsmHighwayTypeConfiguration: Since we are building a macroscopic network based on OSM, we provide a mapping from the common OSM highway types to macroscopic link segment types that we explicitly do include, i.e., support.
initialiseDefaultActivatedOsmRailwayTypes() - Static method in class org.goplanit.osm.defaults.OsmRailwayTypeConfiguration: Since we are building a macroscopic network based on OSM, we provide a mapping from the common OSM railway types to macroscopic link segment types that we explicitly do include, i.e., support.
initialiseDefaultDeactivatedOsmHighwayTypes() - Static method in class org.goplanit.osm.defaults.OsmHighwayTypeConfiguration: Since we are building a macroscopic network based on OSM, we provide a mapping from the common OSM highway types to macroscopic link segment types that we explicitly do not include FOOTWAY BRIDLEWAY STEPS CORRIDOR CYCLEWAY PATH ELEVATOR PROPOSED CONSTRUCTION TURNING_CIRCLE RACE_WAY
initialiseDefaultDeactivatedOsmRailwayTypes() - Static method in class org.goplanit.osm.defaults.OsmRailwayTypeConfiguration: Since we are building a macroscopic network based on OSM, we provide a mapping from the common OSM railway types to macroscopic link segment types that we explicitly do not activate either because they are not used in general assignment (miniature) or because we cannot properly convert them (turn tables, razed), or because they do not represent a railway as such (platform as a way) FUNICULAR MONO_RAIL NARROW_GAUGE ABANDONED CONSTRUCTION DISUSED MINIATURE RAZED TURNTABLE PROPOSED
initialiseDefaultFundamentalDiagramsForLayer(MacroscopicNetworkLayer) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Initialise the default available fundamental diagrams for the layer the component is registered on.
initialiseDefaultFundamentalDiagramsForLayer(MacroscopicNetworkLayer) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Populate the fundamental diagram component with FDs for each link segment type.
initialiseDefaultMappingFromOsmModes2PlanitModes(Modes) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Map both road and rail modes from OSM modes to PLANit modes
initialiseDefaultMappingFromOsmRailModes2PlanitModes(Modes) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: each OSM rail mode is mapped (or not) to a PLANit mode by default so that the memory model's modes are user configurable yet linked to the original format.
initialiseDefaultMappingFromOsmRoadModes2PlanitModes(Modes) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Each OSM road mode is mapped to a PLANit mode by default so that the memory model's modes are user configurable yet linked to the original format.
initialiseIdMappingFunctions() - Method in class org.goplanit.io.converter.PlanitWriterImpl: depending on the chosen id mapping, create the mapping functions for all id carrying entities that are persisted
initialiseIndices() - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: initialise indices used
initialiseInputs(Mode, OdDemands, TransportModelNetwork) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Initialise the loading with the given inputs
initialiseLayerParsers(PlanitOsmNetwork, OsmNetworkReaderSettings, PlanitJtsCrsUtils) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: initialise for each layer
initialiseLayers(MacroscopicNetworkLayerConfigurator) - Method in class org.goplanit.network.MacroscopicNetwork: Tries to initialise and create/register layers via a predefined configuration rather than letting the user do this manually via the infrastructure layers container.
initialiseLeftHandDriveCountries() - Static method in class org.goplanit.utils.locale.DrivingDirectionDefaultByCountry: initialise all left hand drive countries
initialiseOutputAdapters(TrafficAssignment) - Method in class org.goplanit.output.OutputManager: Based on the passed in assignment, create the necessary output adapters
initialiseRun() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Initialise the run conforming to Step 1 in Appendix A of Bliemer et al.
initialiseSourceIdMap(Class<V>, Function<V, K>) - Method in class org.goplanit.converter.BaseReaderImpl: register a new source id tracker (empty) where a function is used to extract the source id from the entity and the class is used unique identifier for the underlying tracking container
initialiseSourceIdMap(Class<V>, Function<V, K>, Iterable<V>) - Method in class org.goplanit.converter.BaseReaderImpl: register a new source id tracker (empty) where a function is used to extract the source id from the entity and the class is used unique identifier for the underlying tracking container
initialiseSpatiallyIndexedLinks(PlanitOsmNetwork) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: initialise based on links in provided network
InitialLinkSegmentCost - Class in org.goplanit.cost.physical.initial: Initial Link Segment Costs stored by mode
InitialLinkSegmentCost(InitialLinkSegmentCost) - Constructor for class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Copy constructor
InitialLinkSegmentCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Constructor
initialLinkSegmentCostByTimePeriod - Variable in class org.goplanit.assignment.TrafficAssignment: The initial link segment cost to use where the mapping is based on the user provided time period.
initialLinkSegmentCosts - Variable in class org.goplanit.project.PlanItProjectInput: Map to store all InitialLinkSegmentCost objects for each physical network
initialLinkSegmentCostTimePeriodAgnostic - Variable in class org.goplanit.assignment.TrafficAssignment: Default initial costs to apply in case no time period specific costs are provided
InitialModesLinkSegmentCost - Class in org.goplanit.cost.physical.initial: Wrapper around all initial costs per link segment per mode.
InitialModesLinkSegmentCost() - Constructor for class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Constructor
InitialModesLinkSegmentCost(InitialModesLinkSegmentCost) - Constructor for class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Copy constructor
InitialPhysicalCost - Class in org.goplanit.cost.physical.initial: The initial physical costs for the network
InitialPhysicalCost(InitialPhysicalCost) - Constructor for class org.goplanit.cost.physical.initial.InitialPhysicalCost: Copy constructor
InitialPhysicalCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.initial.InitialPhysicalCost: Constructor
injectDefaultLinkSegmentType(XMLElementLayerConfiguration) - Static method in class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper: in case no link segment types are defined on the layer, we inject a default link segment type
INNER_ROLE - Static variable in class org.goplanit.osm.tags.OsmMultiPolygonTags
INPUT_PRIORITY - org.goplanit.output.property.OutputPropertyPriority
inputBuilderListener - Variable in class org.goplanit.project.CustomPlanItProject: the listener that we register on each traffic assignment component creation event for external initialization
InputBuilderListener - Class in org.goplanit.input: Base input builder class that gets notified whenever traffic assignment components are to be populated or configured.
InputBuilderListener() - Constructor for class org.goplanit.input.InputBuilderListener: Constructor
inputProperties - Variable in class org.goplanit.graph.EdgeImpl: Generic input property storage
inputProperties - Variable in class org.goplanit.graph.VertexImpl: generic input property storage
inputProperties - Variable in class org.goplanit.zoning.ZoneImpl: generic input property storage
inputs - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModel: inputs for this node model instance
inputs - Variable in class org.goplanit.project.CustomPlanItProject: The input container holding all traffic assignment input components and related functionality with respect to project management
INTEGER - org.goplanit.output.enums.DataType
IntegerToLongList(List<Integer>) - Static method in class org.goplanit.utils.box.BoxUtils: Convert an integer list to a long list
integrateTransportNetworkViaConnectoids() - Method in class org.goplanit.network.transport.TransportModelNetwork: Integrate physical and virtual links within od zones (undirected connectoid access node and centroid)
InteractorAccessee - Interface in org.goplanit.interactor: Interactor accessee.
InteractorAccessor<T extends InteractorAccessee> - Interface in org.goplanit.interactor: Interactor accessor.
IntermodalConverter - Class in org.goplanit.converter.intermodal: A converter that supports intermodal networks, i.e., a combination of both a network and a zoning with transfer zones
IntermodalConverter(MultiConverterReader<MacroscopicNetwork, Zoning>, MultiConverterWriter<MacroscopicNetwork, Zoning>) - Constructor for class org.goplanit.converter.intermodal.IntermodalConverter: Constructor
IntermodalConverterFactory - Class in org.goplanit.converter.intermodal: Factory class for creating intermodal network converters for specific reader/writer combinations
IntermodalConverterFactory() - Constructor for class org.goplanit.converter.intermodal.IntermodalConverterFactory
IntermodalReader - Interface in org.goplanit.converter.intermodal: Abstract base class implementation to parser an intermodal PLANit network
intermodalReaderSettings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: intermodal reader settings to use
IntermodalWriter - Interface in org.goplanit.converter.intermodal: abstract base class implementation to write an intermodal PLANit network to disk
invoke() - Method in class org.goplanit.utils.function.NullaryDoubleSupplier
IRELAND - Static variable in class org.goplanit.utils.locale.CountryNames
IS_AUTHORITY - org.goplanit.gtfs.enums.GtfsKeyType
IS_BIDIRECTIONAL - org.goplanit.gtfs.enums.GtfsKeyType
IS_OPERATOR - org.goplanit.gtfs.enums.GtfsKeyType
IS_PRODUCER - org.goplanit.gtfs.enums.GtfsKeyType
isActivateBushBased() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Verify if bush based assignment is applied or not
isActivated(String) - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Verify if the passed in OSM way type is explicitly supported.
isActivateDetailedLogging() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: collect the flag indicating link storage constraints are active or not
isActivatedPublicTransportInfrastructure(Map<String, String>) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Verify if tags represent an infrastructure used for transfers between modes, for example PT platforms, stops, etc.
isAllModesAllowed(Zone) - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if all modes are allowed for this zone
isAllOsmWayNodesAvailable(OsmWay, Map<Long, OsmNode>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Verify that all OSM nodes in the OSM way are available
isAllowed(String, String) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Verify if mode is allowed for given way type.
isAlwaysKeepLargestSubnetwork() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if the largest subnetwork is always kept when we are removing dangling subnetworks
isAnyOutputPersisted(TimePeriod, Set<Mode>, boolean) - Method in class org.goplanit.output.OutputManager: Verify if anything is actually persisted when OutputManager.persistOutputData(TimePeriod, Set, boolean) is invoked given the underlying configuration
isApplyDefaultWhenOsmHighwayTypeDeactivated() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: check if a default type is set when the activate type is not supported
isArea(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmTags: Check if tags indicate the entity is in fact an area
isAreaBasedHighway(String) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: Some rail based ways can be areas when tagged in a certain way.
isAreaBasedRailway(String) - Static method in class org.goplanit.osm.tags.OsmRailwayTags: Some rail based ways can be areas when tagged in a certain way.
isAveraged() - Method in class org.goplanit.gap.NormBasedGapFunction
isBushBased() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
isBusStop(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: check if this is a bus stop given the provided tags
isCircularOsmWay(OsmWay, Map<String, String>, boolean) - Static method in class org.goplanit.osm.util.OsmWayUtils: Verify if passed osmWay is in fact circular in nature, e.g., , a type of roundabout.
isCircularWayDefaultDirectionClockwise(String) - Static method in class org.goplanit.osm.util.OsmWayUtils: The OSM default driving direction on a roundabout is either anticlockwise (right hand drive countries) or clockwise (left hand drive countries), here we verify, based on the country name, if the default is clockwise or not (anticlockwise)
isCircularWayDirectionClosed(Map<String, String>, boolean, String) - Static method in class org.goplanit.osm.util.OsmWayUtils: assuming the tags represent an OSM way that is tagged as a junction=roundabout or circular, this method verifies the driving direction on this way based on the country it resides in or an explicit override of the clockwise or anticlockwise direction tags.
isClosed2D(Coordinate[]) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: check if coord array is closed, i.e., first coordinate is the same as the last in 2D
isCombinedUnit() - Method in class org.goplanit.utils.unit.GroupUnit: Is the unit a single or combined unit
isCombinedUnit() - Method in class org.goplanit.utils.unit.NoneUnit: Is the unit a single or combined unit
isCombinedUnit() - Method in class org.goplanit.utils.unit.SimpleUnit: Is the unit a single or combined unit
isCombinedUnit() - Method in interface org.goplanit.utils.unit.Unit: Is the unit a single or combined unit
isCompatible(GtfsFileScheme) - Method in class org.goplanit.gtfs.handler.GtfsFileHandler: Verify if handler is compatible with given file scheme
isCompatible(UnitType) - Method in enum org.goplanit.utils.unit.UnitType: Verify compatibility based on whther or not the types belong to the same group
isCompatibleWith(OsmPtVersionScheme, Map<String, String>) - Static method in class org.goplanit.osm.util.OsmPtVersionSchemeUtils: Check if tags contain entries compatible with the provided Pt scheme given that we are verifying an OSM way/node that might reflect a platform, stop, etc.
isCompatibleWithDemands(Demands, Modes) - Method in class org.goplanit.zoning.Zoning: Verify if passed in demands are compatible with the zoning structure.
isConditionallyRequired() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Verify if conditionally required
isConverging() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Verify if we are still converging
isCoordinateLeftOf(Coordinate, Coordinate, Coordinate) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Using the normalised sign of the determinant of line AB and AM we determine if coordM resides left of the line segment AB
isCoordinateRightOf(Coordinate, Coordinate, Coordinate) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Using the normalised sign of the determinant of line AB and AM we determine if coordM resides right of the line segment AB
isCoveredByZoningBoundingPolygon(OsmNode) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Verify if node resides on or within the zoning bounding polygon.
isCoveredByZoningBoundingPolygon(OsmNode, Polygon) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: Verify if node resides on or within the zoning bounding polygon.
isCoveredByZoningBoundingPolygon(OsmWay) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Verify if OSM way has at least one node that resides within the zoning bounding polygon.
isCoveredByZoningBoundingPolygon(OsmWay, Map<Long, OsmNode>, Polygon) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: Verify if OSM way has at least one node that resides within the zoning bounding polygon.
isCriticalSpeedKmHSet() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Verify if a critical speed is set on this group
isCsvDirectorySet() - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Returns whether the csv directory has been set
isCyclewayExcludedForAnyOf(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Verify if a cycleway is explicitly not present for the eligible keys, using the cycle ways regular negative affirmation value tags as a means of checking
isCyclewayIncludedForAnyOf(Map<String, String>, boolean, String...) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Verify if a cycleway is present for the eligible keys, where the value of any of the keys is assumed to either match the getCycleWayValueTagsForMainDirection in case oppositeDirection is set to false, and getCycleWayValueTagsForOppositeDirection when oppositeDirection is set to true
isCyclewayIncludedForAnyOf(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: same as isCyclewayIncludedForAnyOf(tags, false, cyclewayKeys)
isDeactivated(String) - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Verify if the passed in OSM way type is explicitly unsupported.
isDefaultCapacityOrMaxDensityOverwrittenByOsmHighwayType(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Check if defaults should be overwritten
isDefaultCapacityOrMaxDensityOverwrittenByOsmRailwayType(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: check if defaults should be overwritten
isDefaultCapacityOrMaxDensityOverwrittenByOsmWayType(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Check if defaults should be overwritten
isDetailedLogging() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
isDirectionAb() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: check if edge segment runs from vertex a to b or b to a
isDirectionAb() - Method in interface org.goplanit.utils.graph.EdgeSegment: check if edge segment runs from vertex a to b or b to a
isDirectionExplicitAntiClockwise(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmDirectionTags: check if explicit driving direction in clockwise direction is provided
isDirectionExplicitClockwise(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmDirectionTags: check if explicit driving direction in clockwise direction is provided
isDisableLinkStorageConstraints() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Verify to enable link storage constraints or not
isDisableStorageConstraints() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
isEachLayerEmpty() - Method in interface org.goplanit.utils.network.layers.TransportLayers: Check if each layer itself is empty
isEarlier(CumulativePoint, double) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Verify if this point occurs earlier (given epsilon) than the passed in other point
isEarlier(CumulativePoint, double) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Verify if this point occurs earlier (given epsilon) than the passed in other point
isEarlierOrEqual(CumulativePoint, double) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Verify if this point occurs earlier or equal (given epsilon) than the passed in other point
isEarlierOrEqual(CumulativePoint, double) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Verify if this point occurs earlier or equal (given epsilon) than the passed in other point
isEmpty() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: check if network is empty, meaning not a single link, node, or link segment is registered yet
isEmpty() - Method in class org.goplanit.project.ProjectAssignmentBuilders: Check if assignments have already been registered
isEmpty() - Method in interface org.goplanit.utils.graph.UntypedDirectedGraph: Verify if empty, empty when no nodes, edges, edge segments exist
isEmpty() - Method in interface org.goplanit.utils.graph.UntypedGraph: Verify if empty, empty when no nodes and edges exist
isEmpty() - Method in interface org.goplanit.utils.network.layer.TransportLayer: check if the layer is empty of any infrastructure
isEmpty() - Method in interface org.goplanit.utils.path.DirectedPath: verify if the size of the path is zero (empty) or not
isEmpty() - Method in interface org.goplanit.utils.wrapper.MapWrapper: Verify if the map is empty
isEmpty() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Verify if the map is empty
isEmpty() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: check if no transfer zones are registered
isEqual(double, double) - Static method in class org.goplanit.utils.math.Precision: Compare using a Precision.EPSILON_6
isEqual(double, double, double) - Static method in class org.goplanit.utils.math.Precision: Compare using a custom precision epsilon
isEqualExceptForModes(AccessGroupProperties) - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Verify if equal to given properties except for the allowed modes
isEqualExceptForModes(AccessGroupProperties) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Verify if equal to given properties except for the allowed modes
isExactlyOneNonNull() - Method in class org.goplanit.utils.misc.Pair
isExcludedColumn(GtfsKeyType) - Method in class org.goplanit.gtfs.reader.GtfsFileReaderSettings: Verify if a column is excluded
isExcludedOsmNode(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if osm id is an excluded node for pt infrastructure parsing
isExcludedOsmWay(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if osm id is an excluded node for pt infrastructure parsing
isExplicitCapacityPerLaneSet() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Verify if capacity per lane is set explicitly or relies on default
isExplicitMaximumDensityPerLaneSet() - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Verify if maximum density per lane is set explicitly or relies on default
isFactoryForDerivedClassesOf(Class<U>) - Method in class org.goplanit.component.PlanitComponentFactory: Allows one to verify if this factory creates derived classes of the provided class super type.
isFlowPositive(MacroscopicLinkSegment, Mode) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmLinkOutputTypeAdapter: Returns true if there is a flow through the current specified link segment for the specified mode
isFlowPositive(MacroscopicLinkSegment, Mode) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentLinkOutputTypeAdapter: Returns true if there is a flow through the current specified link segment for the specified mode
isFlowPositive(MacroscopicLinkSegment, Mode) - Method in interface org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapter: Returns true if there is a flow through the current specified link segment for the specified mode
isGenerateDetailedLinkGeometryFile() - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Check if a detailed geometry file is generated
isGeometryInAbDirection() - Method in class org.goplanit.network.layer.service.ServiceLegImpl
isGeometryInAbDirection() - Method in interface org.goplanit.utils.graph.Edge: verify if the geometry is in the A to B direction of the link
isGeometryLeftOf(Geometry, Coordinate, Coordinate) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Verify if the provided geometry resides left of the line defined from coordA to coordB.
isGeometryNearBoundingBox(Geometry, Envelope, double) - Method in class org.goplanit.utils.geo.PlanitJtsCrsUtils: Verify if any existing coordinate on the passed in geometry is within the maximum provided distance of the also provided bounding box
isGreater(double, double) - Static method in class org.goplanit.utils.math.Precision: isGreater with Precision.EPSILON_6
isGreater(double, double, double) - Static method in class org.goplanit.utils.math.Precision: isGreaterEqual with epsilon
isGreaterEqual(double, double) - Static method in class org.goplanit.utils.math.Precision: isGreaterEqual with Precision.EPSILON_6
isGreaterEqual(double, double, double) - Static method in class org.goplanit.utils.math.Precision: isGreaterEqual with epsilon
isHalt(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: check if this is a halt given the provided tags
isHighest() - Method in enum org.goplanit.utils.event.EventListenerPriority: Verify if the priority is the highest priority available
isHighwayKeyTag(String) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: verify if passed in tag is indeed the highway key tag
isHighwayParserActive() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if railway parser is active
isImproving() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Verify if the convergence is improving or not given the settings and data provided to the analyser
isInJar(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Check if URI is contained within a JAR file
isInLinkSegmentProcessed(int) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Verify if in-link segment has been processed already or not
isInTransferZoneGroup(TransferZoneGroup) - Method in interface org.goplanit.utils.zoning.TransferZone: Verify if transfer zone is part of passed in transfer zone group
isInTransferZoneGroup(TransferZoneGroup) - Method in class org.goplanit.zoning.TransferZoneImpl: Verify if transfer zone is part of passed in transfer zone group
isInvalidStopAreaStopPosition(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Verify if marked as invalid
isIterativeSendingFlowUpdateActivated() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Verify if the sending flows are updated iteratively and locally in the Step 2 sending flow update.
isKeepOsmNodeOutsideBoundingPolygon(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: check if OSM node is marked for keeping outside bounding polygon
isKeepOsmWayOutsideBoundingPolygon(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: check if OSM way is marked for keeping outside bounding polygon
isLaneIncludedForAnyOf(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmLaneTags: Verify if any of the eligible keys have a value that represents an OSMLaneTags.LANE for the given tags
isLater(CumulativePoint, double) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Verify if this point occurs later (given epsilon) than the passed in other point
isLater(CumulativePoint, double) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Verify if this point occurs later (given epsilon) than the passed in other point
isLaterOrEqual(CumulativePoint, double) - Method in interface org.goplanit.utils.cumulatives.CumulativePoint: Verify if this point occurs later or equal (given epsilon) than the passed in other point
isLaterOrEqual(CumulativePoint, double) - Method in class org.goplanit.utils.cumulatives.CumulativePointImpl: Verify if this point occurs later or equal (given epsilon) than the passed in other point
isLeftHandDrive(String) - Static method in class org.goplanit.utils.locale.DrivingDirectionDefaultByCountry: check if country is left hand drive or not
isLinear() - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: Verify if the branch is linear or not
isLinear() - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Verify if the branch is linear or not
isLinkModeCompatible(Link, Collection<String>, boolean) - Method in class org.goplanit.osm.converter.helper.OsmModeHelper: Find out if PLANit link is mode compatible with the passed in reference OSM modes.
isLocal(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: Test if URL is local, i.e.
isLocalDirectory(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: Test if URL is a local file
isLocalFile(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: Test if URL is a local file
isLocalZipFile(URL) - Static method in class org.goplanit.utils.misc.UrlUtils: Test if URL is a local file
isLocationInternalToAnyLink(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Verify if location is registered as internal to a PLANit link
isLocationPresentInLayer(Point) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: verify if location is registered on this layer either as an internal location on a planit link or as an extreme node of a planit link
isLowest() - Method in enum org.goplanit.utils.event.EventListenerPriority: Verify if the priority is the lowest priority available
isMaximumSpeedKmHSet() - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Verify if a maximum speed is set on this group
isModeAccessOverwrittenByOsmWayId(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: check if defaults should be overwritten
isModeAllowed(Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Returns whether vehicles of a specified mode are allowed through this link
isModeAllowed(Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Verify if mode is available on type
isModeAllowed(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Returns whether vehicles of a specified mode are allowed through this link
isModeAllowed(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Verify if mode is available on type
isModeAllowed(Zone, Mode) - Method in interface org.goplanit.utils.zoning.Connectoid: Verify if a mode is allowed access to the zone via this connectoid
isModeAllowed(Zone, Mode) - Method in class org.goplanit.zoning.ConnectoidImpl: Verify if a mode is allowed access to the zone via this connectoid
isModeAllowedOnOsmWay(String, String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: verify if a particular osm mode is allowed on the provided osm way type e.g.
isModeCompatible(Collection<String>, Collection<String>, boolean) - Method in class org.goplanit.osm.converter.helper.OsmModeHelper: find out if link osmModesToCheck are compatible with the passed in reference osm modes.
isModeMappedToLayer(Mode, String) - Method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: verify if mode is assigned to the layer
isNearNetworkBoundingBox(Geometry, Envelope, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: check if geometry is near network bounding box using buffer based on PlanitOsmNetworkReaderData.BOUNDINGBOX_NEARNESS_DISTANCE_METERS
isNodeAccessDownstream() - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: determine if the node access is downstream or not
isNodeAccessDownstream() - Method in class org.goplanit.zoning.DirectedConnectoidImpl: determine if the node access is downstream or not
isNoLayers() - Method in interface org.goplanit.utils.network.layers.TransportLayers: When there are no layers the instance is considered empty
isNonRailBasedRailway(String) - Static method in class org.goplanit.osm.tags.OsmRailwayTags: Some railways are in fact valid railway value tags but do not represent a rail track.
isNonRoadBasedHighwayValueTag(String) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: Verify if passed in tag is indeed a highway tag that represents a non-road like piece of infrastructure
isNoOneWayCyclewayInAnyLocation(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: Verify if a bi directional cycle way is present on either the left or right hand side of the way, e.g.
isNotEqual(double, double) - Static method in class org.goplanit.utils.math.Precision: Opposite of Precision.isEqual(double, double)
isNullOrBlank(String) - Static method in class org.goplanit.utils.misc.StringUtils: Verify if null or blank
isOneWay(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmOneWayTags: verify if the tags indicate a one way OSM way
isOppositeCyclewayIncludedForAnyOf(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmBicycleTags: same as isCyclewayIncludedForAnyOf(tags, true, cyclewayKeys)
isOppositeLaneIncludedForAnyOf(Map<String, String>, String...) - Static method in class org.goplanit.osm.tags.OsmLaneTags: Verify if any of the eligible keys have a value that represents an OSMLaneTags.LANE for the given tags
isOptional() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Verify if optional
isOsmHighwayTypeActivated(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Verify if the passed in OSM highway type is explicitly activated.
isOsmHighWayTypeDeactivated(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Verify if the passed in OSM high way type is explicitly deactivated.
isOsmNodePresentInLayer(OsmNode) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: verify if OSM node is part of this layer either as a PLANit node, or internal to any PLANit link
isOsmRailwayTypeActivated(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Verify if the passed in OSM railway type is explicitly activated.
isOsmRailwayTypeDeactivated(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Verify if the passed in OSM rail way type is explicitly deactivated.
isOsmWayExcluded(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if provided way id is excluded or not
isOsmWayPerfectLoop(OsmWay) - Static method in class org.goplanit.osm.util.OsmWayUtils: Verify if the OSM way is a perfect loop, i.e., its first node equates to the last node
isOsmWayTypeActivated(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Verify if the passed in OSM way value type is explicitly activated.
isOsmWayTypeDeactivated(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Verify if the passed in OSM way type is explicitly deactivated.
isOutputPropertyValid(OutputProperty) - Method in class org.goplanit.output.configuration.LinkOutputTypeConfiguration: Checks the output property type being added in valid for the current output type configuration
isOutputPropertyValid(OutputProperty) - Method in class org.goplanit.output.configuration.OdOutputTypeConfiguration: Checks the output property type being added in valid for the current output type configuration
isOutputPropertyValid(OutputProperty) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Checks the output property type being added in valid for the current output type configuration
isOutputPropertyValid(OutputProperty) - Method in class org.goplanit.output.configuration.PathOutputTypeConfiguration: Checks the output property type being added in valid for the current output type configuration
isOutputTypeActive(OutputType) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Verify if a given output type is active
isOutputTypeActive(OutputType) - Method in class org.goplanit.output.configuration.OutputConfiguration: Verify ig the output type is activated or not
isOutputTypeActive(OutputType) - Method in class org.goplanit.output.OutputManager: Verify if the given output type is already activated or not
isOverlappingWith(ShortestPathResult, boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: check if shortest path tree is overlapping with one of the alternatives
isOverwriteStopLocationWaitingArea(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if stop location's osm id is marked for overwritten platform mapping
isParserActive() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: verifies if the parser for these settings is active or not
isParserActive() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: verifies if the parser for these settings is active or not
isPartOfCircularWayJunction(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmJunctionTags: verify if the tags indicate a circular way or a road that is part of a circular way by checking its junction tag's value (if any).
isPersistOnlyFinalIteration() - Method in class org.goplanit.output.configuration.OutputConfiguration: Returns whether only the final iteration will be recorded (default is true)
isPersistZeroFlow() - Method in class org.goplanit.output.configuration.OutputConfiguration: Verify if we are persisting zero flow or not (default is false)
isPhysicalQueue() - Method in enum org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme: Verify if the chosen method is any of the physical queue options
isPointQueue() - Method in enum org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme: Verify if the chosen method is any of the point queue ones
isPositionEqual2D(Coordinate) - Method in interface org.goplanit.utils.graph.Vertex: Verify if the vertex position is equal (in 2D) to the passed in coordinate
isPositive(double) - Static method in class org.goplanit.utils.math.Precision: Verify if positive with Precision.EPSILON_6
isPotentiallyBlocking(DirectedVertex) - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Verify if node is registered as potentially blocking
isPotentiallyBlocking(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Verify if node is registered as potentially blocking
isPotentiallyBlocking(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Verify if node is registered as potentially blocking
isPredefinedModeType() - Method in interface org.goplanit.utils.mode.Mode: check if the mode is one of the PLANit predefined mode types or not
isPredefinedModeType() - Method in interface org.goplanit.utils.mode.PredefinedMode: check if the mode is one of the PLANit predefined mode types or not
isPtv2StopPositionPtv1Stop(OsmNode, Map<String, String>) - Static method in class org.goplanit.osm.util.OsmPtVersionSchemeUtils: Verify if the passed on OSM node that is assumed to be recognised as a Ptv2 stop_location is in fact also a Ptv1 stop, either a highway=tram_stop or highway=bus_stop.
isPublicTransportBasedInfrastructure(Map<String, String>) - Static method in class org.goplanit.osm.util.OsmPtVersionSchemeUtils: Verify if passed in tags reflect transfer based infrastructure that is eligible (and supported) to be parsed by this class, e.g.
isRailBasedRailway(String) - Static method in class org.goplanit.osm.tags.OsmRailwayTags: Verify if passed in tag is indeed a railway mode value tag
isRailModeTag(String) - Static method in class org.goplanit.osm.tags.OsmRailModeTags: verify if passed in tag is indeed a mode tag
isRailwayKeyTag(String) - Static method in class org.goplanit.osm.tags.OsmRailwayTags: Verify if passed in tag is indeed the railway key tag
isRailwayParserActive() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if railway parser is active
isRegularFile(URI) - Static method in class org.goplanit.utils.misc.UriUtils: Check if URI is a regular file in the default file system, e.g., a local file not in a zip or jar
isRemoveDanglingSubnetworks() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Verify if dangling subnetworks are removed from the final network
isRemoveDanglingTransferZoneGroups() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: verify if dangling transfer zone groups are removed from the final zoning
isRemoveDanglingZones() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: verify if dangling zones are removed from the final zoning
isRequired() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Verify if required
isRequiredWhenOtherFileAbsent() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Check if conditional requirement depends on other file being absent
isRequiredWhenOtherFilePresent() - Method in class org.goplanit.gtfs.util.GtfsFileConditions: Check if conditional requirement depends on other file being present
isReversedOneWay(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmOneWayTags: verify if the tags indicate a reversed one way OSM way, i.e., the value is set to "-1" indicating the main direction flows in the opposite direction of the geometry (backward)
isRightHandDrive(String) - Static method in class org.goplanit.utils.locale.DrivingDirectionDefaultByCountry: check if country is left hand drive or not
isRoadBasedHighwayValueTag(String) - Static method in class org.goplanit.osm.tags.OsmHighwayTags: Verify if passed in tag is indeed a highway tag that represents a road like piece of infrastructure
isRoadModeCategoryTag(String) - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: verify of the mode category is a valid Osm mode category
isRoadModeInCategory(String, String) - Static method in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: Given the mode, find the related mode category
isRoadModeTag(String) - Static method in class org.goplanit.osm.tags.OsmRoadModeTags: verify if passed in tag is indeed a mode tag
isSegmentCostsSetForMode(Mode) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Are link segment costs available for the given mode (without time period)
isSegmentCostsSetForMode(Mode) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Are link segment costs available for the given mode
isSegmentCostsSetForMode(Mode) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: Are link segment costs available for the given mode (without time period)
isSegmentCostsSetForMode(TimePeriod, Mode) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Are link segment costs available for the given mode (without time period)
isSegmentCostsSetForMode(TimePeriod, Mode) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: Are link segment costs available for the given mode (without time period)
isSegmentCostsSetForTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Are link segment costs available for the given time period
isSegmentCostsSetForTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: Are link segment costs available for the given time period
isSmaller(double, double) - Static method in class org.goplanit.utils.math.Precision: isSmaller with Precision.EPSILON_6
isSmaller(double, double, double) - Static method in class org.goplanit.utils.math.Precision: isSmaller with epsilon
isSmallerEqual(double, double) - Static method in class org.goplanit.utils.math.Precision: isSmallerEqual with Precision.EPSILON_6
isSmallerEqual(double, double, double) - Static method in class org.goplanit.utils.math.Precision: isSmallerEqual with epsilon
isSpeedLimitDefaultsBasedOnUrbanArea() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: collect state of flag indicating to use urban or non-urban default speed limits when speed limit information is missing
isStation(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: check if this is a station given the provided tags
isTrackAllNodeTurnFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Verify if all turn flows are to be tracked during loading.
isTracked(DirectedVertex) - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Verify if node is registered as being tracked with splitting rates
isTracked(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Verify if node is registered as being tracked with splitting rates
isTracked(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Verify if node is registered as being tracked with splitting rates
isTramStop(Map<String, String>) - Static method in class org.goplanit.osm.tags.OsmPtv1Tags: check if this is a tram stop given the provided tags
isTransferZoneAtLocation(TransferZone, Point) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Verify if the geometry of the transfer zone equates to the provided location
isTransferZoneLeftOf(TransferZone, Coordinate, Coordinate, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: Verify of the transfer zone resides left of the line coordA to coordB
isUnitOverride() - Method in class org.goplanit.output.property.OutputProperty: Indicates if default units are overridden or not.
isValidGtfsLocation(URL) - Static method in class org.goplanit.gtfs.util.GtfsUtils: A GTFS location URL is valid when it is either a directory or a zip file from which we can source the various GTFS files
isVertexNearBoundingBox(Vertex, Envelope, double, PlanitJtsCrsUtils) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Verify if node is within maximum distance of provided bounding box
isWaitingAreaStopLocationOverwritten(EntityType, Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Verify if the witing area is used as the designated waiting area for a stop location by means of a user explicitly stating it as such
isWaitingAreaWithoutMappedPlanitMode(EntityType, long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Verify if marked as waiting area without a mapped planit mode
isWaterModeTag(String) - Static method in class org.goplanit.osm.tags.OsmWaterModeTags: verify if passed in tag is indeed a mode tag
isXmlDirectorySet() - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Returns whether the XML directory has been set
ITERATION_INDEX - org.goplanit.output.property.OutputPropertyType
IterationIndexOutputProperty - Class in org.goplanit.output.property
IterationIndexOutputProperty() - Constructor for class org.goplanit.output.property.IterationIndexOutputProperty
iterator - Variable in class org.goplanit.output.formatter.MemoryOutputFormatter: Iterator to loop over results contained in this formatter
iterator() - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl
iterator() - Method in class org.goplanit.od.demand.OdDemandMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.od.path.OdPathMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.od.path.OdPathsHashed: Returns an iterator which can iterate through all the origin-destination entries
iterator() - Method in class org.goplanit.od.skim.OdSkimMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.path.DirectedPathImpl
iterator() - Method in class org.goplanit.project.ProjectAssignmentBuilders: iterable over registered traffic assignments
iterator() - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl
iterator() - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl
iterator() - Method in interface org.goplanit.utils.od.OdData: Returns an iterator which can iterate through all the origin-destination cells
iterator() - Method in interface org.goplanit.utils.od.OdHashed: Returns an iterator which can iterate through all the origin-destination entries
iterator() - Method in class org.goplanit.utils.od.OdHashedImpl: Returns an iterator which can iterate through all the origin-destination entries
iterator() - Method in interface org.goplanit.utils.od.OdMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.utils.od.OdMatrixImpl: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.utils.od.OdNonPrimitiveMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.utils.od.OdPrimitiveMatrix: Returns an iterator which can iterate through all the origin-destination cells in the matrix
iterator() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl
iterator() - Method in class org.goplanit.zoning.ConnectoidImpl
iterator() - Method in class org.goplanit.zoning.TransferZoneGroupImpl

J

JAMAICA - Static variable in class org.goplanit.utils.locale.CountryNames
JAPAN - Static variable in class org.goplanit.utils.locale.CountryNames
jarUriOfJarEntry(URI) - Static method in class org.goplanit.utils.misc.UriUtils: collect only the jar URI part by stripping all beyond the jar, i.e., remove the part that points to a location within the jar If this is not a jar URI, we return the original URI
JAXBUtils - Class in org.goplanit.io.xml.util: Utility methods for parsing XML data
JAXBUtils() - Constructor for class org.goplanit.io.xml.util.JAXBUtils
JERSEY - Static variable in class org.goplanit.utils.locale.CountryNames
jtsGeometryFactory - Static variable in class org.goplanit.utils.geo.PlanitJtsCrsUtils: jts geometry factory, jts geometry differs from opengis implementation by not carrying the crs and being more lightweight
jtsGeometryFactory - Static variable in class org.goplanit.utils.geo.PlanitJtsUtils: jts geometry factory, jts geometry differs from opengis implementation by not carrying the crs and being more lightweight
JUNCTION - Static variable in class org.goplanit.osm.tags.OsmJunctionTags

K

KENYA - Static variable in class org.goplanit.utils.locale.CountryNames
keyMatchesAnyValueTag(Map<String, String>, String, String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Verify if the passed in key matches and of the passed in values in the tags provided, all value tags are filtered by applying OsmTagUtils.VALUETAG_SPECIALCHAR_STRIP_REGEX
KIRIBATI - Static variable in class org.goplanit.utils.locale.CountryNames
KM - org.goplanit.tntp.enums.LengthUnits
KM - org.goplanit.utils.unit.UnitType
KM - Static variable in interface org.goplanit.utils.unit.Unit: predefined KM DistanceUnit
KM_H - org.goplanit.tntp.enums.SpeedUnits
KM_HOUR - Static variable in interface org.goplanit.utils.unit.Unit: predefined KM/HOUR Unit
KNOTS - Static variable in class org.goplanit.osm.tags.OsmSpeedTags: unit addendum for max speed values in knots

L

LANE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
LANE - Static variable in class org.goplanit.osm.tags.OsmBusWayTags
LANE - Static variable in class org.goplanit.osm.tags.OsmLaneTags: e.g.
laneConfiguration - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the default number of lanes used in case no explicit information is available on the osmway's tags
LANES - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_BACKWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_BUS - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_BUS_BACKWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_BUS_FORWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_FORWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_PSV - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_PSV_BACKWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
LANES_PSV_FORWARD - Static variable in class org.goplanit.osm.tags.OsmLaneTags
lanesModeBackwardKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: lanes:<mode>:backward tags
lanesModeForwardKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: lanes:<mode>:forward tags
lanesModeKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: lanes:<mode> tags
lanesPerDirection - Variable in class org.goplanit.osm.defaults.OsmLaneDefaults: store the defaults for class instance
lanesPerDirectionIfUnspecified - Variable in class org.goplanit.osm.defaults.OsmLaneDefaults: lanes per direction if not configured
LANGUAGE - org.goplanit.gtfs.enums.GtfsKeyType
LARGE_HEAVY_GOODS_VEHICLE - org.goplanit.utils.mode.PredefinedModeType
LargeHeavyGoodsMode - Class in org.goplanit.mode: the predefined large heavy goods vehicle mode, i.e., large articulated truck, larger than heavy goods name: lhgv maxspeed (km/h): 90 pcu: 3 vehicular type: VEHICULAR motorisation: MOTORISED track: ROAD use: GOODS
LargeHeavyGoodsMode(IdGroupingToken) - Constructor for class org.goplanit.mode.LargeHeavyGoodsMode: Constructor for large heavy goods vehicle mode
layerModifier - Variable in class org.goplanit.network.layer.UntypedNetworkLayerImpl: the modifier to use to apply larger modifications
LEFT - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
LEFT - Static variable in class org.goplanit.osm.tags.OsmTags
leftHandDriveCountries - Static variable in class org.goplanit.utils.locale.DrivingDirectionDefaultByCountry: all Left hand drive countries which determine the default direction on one way roundabouts when not tagged
LENGTH - org.goplanit.gtfs.enums.GtfsKeyType
LENGTH - org.goplanit.output.property.OutputPropertyType
LENGTH - org.goplanit.tntp.enums.NetworkFileColumnType
LENGTH - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
lengthInKm - Variable in class org.goplanit.graph.EdgeImpl: Length of edge
lengthKm - Variable in class org.goplanit.zoning.ConnectoidImpl.AccessZoneProperties: length to connectoid
LengthOutputProperty - Class in org.goplanit.output.property
LengthOutputProperty() - Constructor for class org.goplanit.output.property.LengthOutputProperty
LengthUnits - Enum in org.goplanit.tntp.enums
LESOTHO - Static variable in class org.goplanit.utils.locale.CountryNames
LEVEL - org.goplanit.gtfs.enums.GtfsObjectType
LEVEL_ID - org.goplanit.gtfs.enums.GtfsKeyType
LEVEL_INDEX - org.goplanit.gtfs.enums.GtfsKeyType
LEVEL_NAME - org.goplanit.gtfs.enums.GtfsKeyType
LEVELS - org.goplanit.gtfs.enums.GtfsFileType
LHGV_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.LargeHeavyGoodsMode
LHGV_USABLITY_FEATURES - Static variable in class org.goplanit.mode.LargeHeavyGoodsMode
LIGHT_RAIL - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
LIGHT_RAIL - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
LIGHTRAIL - org.goplanit.utils.mode.PredefinedModeType
LIGHTRAIL_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.LightRailMode
LIGHTRAIL_USABLITY_FEATURES - Static variable in class org.goplanit.mode.LightRailMode
LightRailMode - Class in org.goplanit.mode: the predefined lightrail mode name: lightrail maxspeed (km/h): 70 pcu: 6 vehicular type: VEHICULAR motorisation: MOTORISED track: RAIL use: PUBLIC
LightRailMode(IdGroupingToken) - Constructor for class org.goplanit.mode.LightRailMode: Constructor for lightrail mode
limitCurrentSendingFlowsToCapacity(MacroscopicLinkSegments) - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: Reduce all current link segments' sending flows to capacity in case they exceed it
limitFlowsToCapacity(double[], MacroscopicLinkSegments) - Method in class org.goplanit.assignment.ltm.sltm.LinkSegmentData: Reduce all provided link segments' flows to capacity
limitNextReceivingFlowsToCapacity(MacroscopicLinkSegments) - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Reduce all provided link segments' receiving flows to capacity in case they exceed it
LinearFundamentalDiagramBranch - Class in org.goplanit.supply.fundamentaldiagram: A linear fundamental diagram branch implementation
LinearFundamentalDiagramBranch(double, double) - Constructor for class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Constructor
LinearFundamentalDiagramBranch(LinearFundamentalDiagramBranch) - Constructor for class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Copy constructor
lineGeometry - Variable in class org.goplanit.graph.EdgeImpl: The line geometry of this link if set
Link - Interface in org.goplanit.utils.network.layer.physical: Link interface which extends the Edge interface with a unique id (not all edges are links) as well as an external id
LINK - org.goplanit.output.enums.OutputType
LINK - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlElements
LINK_BASED_RELATIVE_GAP - Static variable in class org.goplanit.gap.GapFunction: short code for link based relative duality gap function type
LINK_ID_CLASS - Static variable in interface org.goplanit.utils.network.layer.physical.Link: id class for generating ids
LINK_OSMWAY_TYPE_PROPERTY_KEY - Static variable in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: to be able to retain the information on the osm way type to be able to identify the importance of an osm way compared to others we use the osm way type and store it as an input property on the link using this key
LINK_REF_ID - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
LINK_SEGMENT_COST - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_EXTERNAL_ID - org.goplanit.output.enums.PathOutputIdentificationType
LINK_SEGMENT_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_ID - org.goplanit.output.enums.PathOutputIdentificationType
LINK_SEGMENT_ID - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_ID_CLASS - Static variable in interface org.goplanit.utils.network.layer.physical.LinkSegment: additional id class for generating link segment ids
LINK_SEGMENT_TYPE_ID - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_TYPE_NAME - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_TYPE_XML_ID - org.goplanit.output.property.OutputPropertyType
LINK_SEGMENT_XML_ID - org.goplanit.output.enums.PathOutputIdentificationType
LINK_SEGMENT_XML_ID - org.goplanit.output.property.OutputPropertyType
LINK_TYPE - org.goplanit.tntp.enums.NetworkFileColumnType
LinkBasedRelativeDualityGapFunction - Class in org.goplanit.gap: Gap function based on the work of Bovy and Jansen (1983) who take the different between the current system travel time and the system travel time if all flow were to be assigned to the shortest paths, divided by the system travel time
LinkBasedRelativeDualityGapFunction(LinkBasedRelativeDualityGapFunction) - Constructor for class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Copy constructor
LinkBasedRelativeDualityGapFunction(IdGroupingToken, StopCriterion) - Constructor for class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Constructor
LinkBasedRelativeGapConfigurator - Class in org.goplanit.gap: Link based relative duality gap function configurator
LinkBasedRelativeGapConfigurator() - Constructor for class org.goplanit.gap.LinkBasedRelativeGapConfigurator: Constructor
LinkFactory - Interface in org.goplanit.utils.network.layer.physical: Factory interface for creating links.
LinkFactoryImpl - Class in org.goplanit.network.layer.physical: Factory for creating links on links container
LinkFactoryImpl(IdGroupingToken, GraphEntities<Link>) - Constructor for class org.goplanit.network.layer.physical.LinkFactoryImpl: Constructor
linkId - Variable in class org.goplanit.network.layer.physical.LinkImpl: unique internal identifier
LinkImpl - Class in org.goplanit.network.layer.physical: Link class connecting two nodes via some geometry.
LinkImpl(LinkImpl) - Constructor for class org.goplanit.network.layer.physical.LinkImpl: Copy constructor, geometry is deep copied, see also DirectedEdge copy constructed
LinkImpl(IdGroupingToken, Node, Node) - Constructor for class org.goplanit.network.layer.physical.LinkImpl: Constructor which injects link length directly
LinkImpl(IdGroupingToken, Node, Node, double) - Constructor for class org.goplanit.network.layer.physical.LinkImpl: Constructor which injects link length directly
LinkInflowOutflowAccessee - Interface in org.goplanit.interactor: Link inflow/outflow accessee.
LinkInflowOutflowAccessor - Interface in org.goplanit.interactor: Link Volume Accessor interface
linkNtCategoryfunction - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: optional function used to populate the MATSIM link's nt_category field if set
linkNtTypefunction - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: optional function used to populate the MATSIM link's nt_type field if set
LinkOutputTypeConfiguration - Class in org.goplanit.output.configuration: The configuration for the link output type.
LinkOutputTypeConfiguration() - Constructor for class org.goplanit.output.configuration.LinkOutputTypeConfiguration: Constructor Define the default output properties here.
Links - Interface in org.goplanit.utils.network.layer.physical: rimary managed container class for links with access to factory capable of creating new links and registering them on the container directly
LINKS - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlElements
linkSegment - Variable in class org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary: the link segment of this boundary
LinkSegment - Interface in org.goplanit.utils.network.layer.physical: Interface for link segments (directional) part of link (non-directional).
LinkSegmentBoundary - Class in org.goplanit.assignment.ltm.eltm: LinkSegment boundary of a link segment.
LinkSegmentBoundary.Location - Enum in org.goplanit.assignment.ltm.eltm: Location types for a link segment boundary
LinkSegmentCostOutputProperty - Class in org.goplanit.output.property: Link segment cost property.
LinkSegmentCostOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentCostOutputProperty
LinkSegmentData - Class in org.goplanit.assignment.ltm.sltm: POJO to store Link segment based variables by the link segment internal id for sLTM link segment based data.
LinkSegmentData(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.LinkSegmentData: Constructor
LinkSegmentData(int, double) - Constructor for class org.goplanit.assignment.ltm.sltm.LinkSegmentData: Constructor
LinkSegmentExpectedResultsDto - Class in org.goplanit.utils.test: DTO object containing extra fields specific to BPR function The first
LinkSegmentExpectedResultsDto(long, long, double, double, double, double, double) - Constructor for class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Constructor
LinkSegmentExternalIdOutputProperty - Class in org.goplanit.output.property
LinkSegmentExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
LinkSegmentFactory - Interface in org.goplanit.utils.network.layer.physical: Factory to create link segments and register them on its container
LinkSegmentFactoryImpl - Class in org.goplanit.network.layer.physical: Factory for creating link segments on link segments container
LinkSegmentFactoryImpl(IdGroupingToken, LinkSegments) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentFactoryImpl: Constructor
linkSegmentId - Variable in class org.goplanit.network.layer.physical.LinkSegmentImpl: unique internal identifier
LinkSegmentIdOutputProperty - Class in org.goplanit.output.property
LinkSegmentIdOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentIdOutputProperty
LinkSegmentImpl - Class in org.goplanit.network.layer.physical: Link segment object representing physical links in the network and storing their properties
LinkSegmentImpl(LinkSegmentImpl) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentImpl: Copy constructor
LinkSegmentImpl(IdGroupingToken, boolean) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentImpl: Constructor
LinkSegmentImpl(IdGroupingToken, Link, boolean) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentImpl: Constructor
LinkSegments - Interface in org.goplanit.utils.network.layer.physical: Primary managed container for linkSegments explicitly and create them on the container via its dedicated factory class
LinkSegmentsImpl - Class in org.goplanit.network.layer.physical: Link segments primary managed container implementation
LinkSegmentsImpl(LinkSegmentsImpl) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentsImpl: Copy constructor
LinkSegmentsImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentsImpl: Constructor
LinkSegmentsImpl(IdGroupingToken, LinkSegmentFactory) - Constructor for class org.goplanit.network.layer.physical.LinkSegmentsImpl: Constructor
linkSegmentType - Variable in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: the link type of this link containing all macroscopic features by user class
LinkSegmentTypeIdOutputProperty - Class in org.goplanit.output.property
LinkSegmentTypeIdOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
LinkSegmentTypeNameOutputProperty - Class in org.goplanit.output.property
LinkSegmentTypeNameOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
linkSegmentTypes - Variable in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: The container for the link segment types available across all link segments
linkSegmentTypesWithAddedModes - Variable in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes: the segment types with added modes compared to the original
linkSegmentTypesWithRemovedModes - Variable in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes: the segment types with removed modes compared to the original
LinkSegmentTypeXmlIdOutputProperty - Class in org.goplanit.output.property
LinkSegmentTypeXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
LinkSegmentXmlIdOutputProperty - Class in org.goplanit.output.property: Property reflecting the input xml id used when parsing the link segment in native PLANit format.
LinkSegmentXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty
LinksImpl - Class in org.goplanit.network.layer.physical: Links primary managed container implementation
LinksImpl(LinksImpl) - Constructor for class org.goplanit.network.layer.physical.LinksImpl: Copy constructor
LinksImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.physical.LinksImpl: Constructor
LinksImpl(IdGroupingToken, LinkFactory) - Constructor for class org.goplanit.network.layer.physical.LinksImpl: Constructor
linkTypefunction - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: optional function used to populate the MATSIM link's type field if set
linkVolumeAccessee - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Link volume accessee object for this cost function
LinkVolumeAccessee - Interface in org.goplanit.interactor: Link Volume accessee object.
LinkVolumeAccessor - Interface in org.goplanit.interactor: Link Volume Accessor interface
listeners - Variable in class org.goplanit.utils.event.EventProducerImpl: The collection of interested listeners by event and priority
listTo2DCoordinates(List<?>) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Create an array of coordinates based on a list of some type that can be interpreted as strings and converted to doubles.
LIVING_STREET - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
LIVING_STREET_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
LOC_REF - Static variable in class org.goplanit.osm.tags.OsmTags
LOCAL_REF - Static variable in class org.goplanit.osm.tags.OsmTags
LocaleUtils - Class in org.goplanit.utils.locale: Utilities for locale
LocaleUtils() - Constructor for class org.goplanit.utils.locale.LocaleUtils
LOCATION_BASED_CYCLEWAY_KEY_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: cycleway:left cycleway:right
LOCATION_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
lockOutputProperties(OutputType) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Lock the output keys and values for a specified output type
logActiveStateByClassName(Object, boolean) - Static method in class org.goplanit.utils.misc.LoggingUtils: create a string that states if item is activated or deactivated based and provide the simple class name
logConnectoidStatus(int) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: log user information based on currently number of registered connectoids
logDeactivatedTypes() - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Log all de-activated OSM way types
logGapsSince(long, int) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Log gaps since iteration provided
LOGGER - Static variable in class org.goplanit.assignment.TrafficAssignmentBuilder: the logger
LOGGER - Static variable in interface org.goplanit.interactor.InteractorAccessor: logger to use
LOGGER - Static variable in interface org.goplanit.io.xml.converter.EnumConverter: the logger
LOGGER - Static variable in class org.goplanit.io.xml.util.JAXBUtils: the logger
LOGGER - Static variable in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: the logger to use
LOGGER - Static variable in class org.goplanit.osm.util.PlanitZoningUtils: the logger to use
LOGGER - Static variable in class org.goplanit.output.configuration.OutputTypeConfiguration: the logger
LOGGER - Static variable in class org.goplanit.path.choice.PathChoiceBuilder: the logger
LOGGER - Static variable in class org.goplanit.path.choice.StochasticPathChoiceBuilder: the logger
LOGGER - Static variable in interface org.goplanit.utils.graph.Vertex: vertex logger
LOGGER - Static variable in interface org.goplanit.utils.zoning.Zone: the logger
Logging - Class in org.goplanit.logging: Utility class to close the current logger
Logging() - Constructor for class org.goplanit.logging.Logging
LoggingUtils - Class in org.goplanit.utils.misc: some utilities for consistent logging message creation in PLANit
LoggingUtils() - Constructor for class org.goplanit.utils.misc.LoggingUtils
logInfo(String) - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in class org.goplanit.network.layer.TransportLayerImpl: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in class org.goplanit.network.layer.UntypedPhysicalLayerImpl: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in interface org.goplanit.service.routed.RoutedServicesLayer: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in interface org.goplanit.utils.network.layer.TransportLayer: invoked by entities inquiring about general information about the layer to display to users
logInfo(String) - Method in class org.goplanit.zoning.Zoning: Log general information on this zoning to the user
logitChoiceModel - Variable in class org.goplanit.path.choice.StochasticPathChoice: The registered logit choice model
LogitChoiceModel - Class in org.goplanit.path.choice.logit: The logit choice model base class.
LogitChoiceModel(LogitChoiceModel) - Constructor for class org.goplanit.path.choice.logit.LogitChoiceModel: Copy constructor
LogitChoiceModel(IdGroupingToken) - Constructor for class org.goplanit.path.choice.logit.LogitChoiceModel: Constructor
logitChoiceModelConfigurator - Variable in class org.goplanit.path.choice.StochasticPathChoiceConfigurator: logit choice model configurator
LogitChoiceModelConfigurator<T extends LogitChoiceModel> - Class in org.goplanit.path.choice.logit: Base class for all logit choice model configurator implementations
LogitChoiceModelConfigurator(Class<T>) - Constructor for class org.goplanit.path.choice.logit.LogitChoiceModelConfigurator: Constructor
LogitChoiceModelConfiguratorFactory - Class in org.goplanit.path.choice.logit: factory for the logit choice model types supported directory by PLANit
LogitChoiceModelConfiguratorFactory() - Constructor for class org.goplanit.path.choice.logit.LogitChoiceModelConfiguratorFactory
logLinkSegmentStatus(long) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: log user information based on currently number of registered link segments
logLinkStatus(long) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: log user information based on currently number of registered links
logNodeStatus(long) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: log user information based on currently number of registered nodes
logProcessingStats(OsmZoningReaderData, Zoning) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: log counters regarding main processing phase
logProfileInformation() - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: log profile information gathered during parsing (so far)
logProfileInformation(MacroscopicNetworkLayer) - Method in class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler: log counters
logRegisteredComponent(Object, boolean) - Method in class org.goplanit.assignment.TrafficAssignment: log registering an item on this traffic assignment
logSettings() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Convenience method to log all the current settings
logSettings() - Method in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Log settings
logSettings(MacroscopicNetwork) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Convenience method to log all the current settings
logTransferZoneGroupStatus(int) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: log user information based on currently number of registered transfer zone groups
logTransferZoneStatus(long) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: log user information based on currently number of registered transfer zones
logUnsupportedOsmHighwayTypes() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Log all de-activated OSM highwayway types
logUnsupportedOsmRailwayTypes() - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Log all de-activated OSM railway types
logUnsupportedOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Log all de-activated OSM way types
logUnsupportedOsmWayTypes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Log all de-activated OSM way types
logWarningIfNotNearBoundingBox(String, Geometry) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: log the given warning message but only when it is not too close to the bounding box, because then it is too likely that it is discarded due to missing infrastructure or other missing assets that could not be parsed fully as they pass through the bounding box barrier.
logWarningIfNotNearBoundingBox(String, Geometry, Envelope, PlanitJtsCrsUtils) - Static method in class org.goplanit.osm.util.OsmBoundingAreaUtils: log the given warning message but only when it is not too close to the bounding box, because then it is too likely that it is discarded due to missing infrastructure or other missing assets that could not be parsed fully as they pass through the bounding box barrier.
LONG - org.goplanit.output.enums.DataType
LongMapWrapper<V> - Interface in org.goplanit.utils.wrapper: Version of MApWrapper when we use Long as key
LongMapWrapperImpl<V> - Class in org.goplanit.utils.wrapper: Wrapper class for a map instance with Long keys
LongMapWrapperImpl(Map<Long, V>, Function<V, Long>) - Constructor for class org.goplanit.utils.wrapper.LongMapWrapperImpl: Constructor
LongMapWrapperImpl(LongMapWrapperImpl<V>) - Constructor for class org.goplanit.utils.wrapper.LongMapWrapperImpl: Copy constructor
longStringToBigDecimal(String) - Static method in class org.goplanit.utils.math.TypeConversionUtil: convert a string that can be interpreted as a long to a type that parses long via .valueOf(long theLong)
loopAll(double[][], BiConsumer<Integer, Integer>) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Loop over array entries and apply consumer
loopAll(double[], Consumer<Integer>) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Loop over array entries and apply consumer
loopAll(T[], Consumer<T>) - Static method in class org.goplanit.utils.arrays.ArrayUtils: Loop over array entries and apply consumer
LOW - org.goplanit.utils.event.EventListenerPriority
LTM_RELEASE_FLOW_EVENT - Static variable in class org.goplanit.assignment.ltm.eltm.event.ReleaseFlowEvent: event type to identify ltm events representing a change in flow that is being released
LTM_TRIGGER_FLOW_EVENT - Static variable in class org.goplanit.assignment.ltm.eltm.event.TriggerFlowEvent: event type to identify ltm events representing a change in flow that is exogenously triggered
LtmAssignment - Class in org.goplanit.assignment.ltm: Link Transmission Model implementation base implementation for network loading based on LTM network loading paradigm.
LtmAssignment(LtmAssignment) - Constructor for class org.goplanit.assignment.ltm.LtmAssignment: Copy Constructor
LtmAssignment(IdGroupingToken) - Constructor for class org.goplanit.assignment.ltm.LtmAssignment: Constructor
LtmConfigurator<T extends LtmAssignment> - Class in org.goplanit.assignment.ltm: Configurator for sLTM.
LtmConfigurator(Class<T>) - Constructor for class org.goplanit.assignment.ltm.LtmConfigurator: Constructor
LtmTrafficAssignmentBuilder<T extends LtmAssignment> - Class in org.goplanit.assignment.ltm: An LTM traffic assignment builder is assumed to only support Link Transmission Model (LTM) traffic assignment instances.
LtmTrafficAssignmentBuilder(Class<T>, IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.assignment.ltm.LtmTrafficAssignmentBuilder: Constructor

M

M - org.goplanit.tntp.enums.LengthUnits
M_SEC - org.goplanit.tntp.enums.SpeedUnits
MACAU - Static variable in class org.goplanit.utils.locale.CountryNames
MACROSCOPIC_COMBINED_INPUT_XSD - Static variable in class org.goplanit.io.xml.util.PlanitSchema
MACROSCOPIC_DEMAND_XSD - Static variable in class org.goplanit.io.xml.util.PlanitSchema
MACROSCOPIC_DEMAND_XSD_SCHEMA_URI_DEV - Static variable in class org.goplanit.io.xml.util.PlanitSchema: the schema URI location of planit macroscopic zoning input during development
MACROSCOPIC_LINK_SEGMENT_TYPE_ID_CLASS - Static variable in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: id class for generating ids
MACROSCOPIC_NETWORK - Static variable in class org.goplanit.network.Network: shorthand for creating a macroscopic infrastructure network
MACROSCOPIC_NETWORK_XSD - Static variable in class org.goplanit.io.xml.util.PlanitSchema
MACROSCOPIC_NETWORK_XSD_SCHEMA_URI_DEV - Static variable in class org.goplanit.io.xml.util.PlanitSchema: the schema URI location of planit macroscopic network input during development
MACROSCOPIC_ZONING_XSD - Static variable in class org.goplanit.io.xml.util.PlanitSchema
MACROSCOPIC_ZONING_XSD_SCHEMA_URI_DEV - Static variable in class org.goplanit.io.xml.util.PlanitSchema: the schema URI location of planit macroscopic zoning input during development
MacroscopicConstants - Class in org.goplanit.utils.macroscopic
MacroscopicConstants() - Constructor for class org.goplanit.utils.macroscopic.MacroscopicConstants
MacroscopicLinkOutputTypeAdapter - Interface in org.goplanit.output.adapter: Interface defining the methods required for a macroscopic link (segment) output adapter
MacroscopicLinkOutputTypeAdapterImpl - Class in org.goplanit.output.adapter: Top-level abstract class which defines the common methods required by macroscopic link output type adapters.
MacroscopicLinkOutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.MacroscopicLinkOutputTypeAdapterImpl: Constructor
MacroscopicLinkSegment - Interface in org.goplanit.utils.network.layer.macroscopic: Macroscopic traffic modeling oriented link segment.
MacroscopicLinkSegmentFactory - Interface in org.goplanit.utils.network.layer.macroscopic: Factory to create link segments and register them on its container
MacroscopicLinkSegmentFactoryImpl - Class in org.goplanit.network.layer.macroscopic: Factory for creating link segments on link segments container
MacroscopicLinkSegmentFactoryImpl(IdGroupingToken, MacroscopicLinkSegments) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentFactoryImpl: Constructor
MacroscopicLinkSegmentImpl - Class in org.goplanit.network.layer.macroscopic: Link segment for macroscopic transport networks.
MacroscopicLinkSegmentImpl(MacroscopicLinkSegmentImpl) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Copy constructor
MacroscopicLinkSegmentImpl(IdGroupingToken, Link, boolean) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Constructor
MacroscopicLinkSegments - Interface in org.goplanit.utils.network.layer.macroscopic: Primary managed container for MacroscopicLinkSegments explicitly and create them on the container via its dedicated factory class
MacroscopicLinkSegmentsImpl - Class in org.goplanit.network.layer.macroscopic: Link segments container implementation
MacroscopicLinkSegmentsImpl(MacroscopicLinkSegmentsImpl) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentsImpl: Copy constructor
MacroscopicLinkSegmentsImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentsImpl: Constructor
MacroscopicLinkSegmentsImpl(IdGroupingToken, MacroscopicLinkSegmentFactory) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentsImpl: Constructor
MacroscopicLinkSegmentType - Interface in org.goplanit.utils.network.layer.macroscopic: The macroscopic link segment type characteristics are contained in this class
MacroscopicLinkSegmentTypeFactory - Interface in org.goplanit.utils.network.layer.macroscopic: Factory to create link segments and register them on its container
MacroscopicLinkSegmentTypeFactoryImpl - Class in org.goplanit.network.layer.macroscopic: Factory for creating macroscopic link segment types on link segment types container
MacroscopicLinkSegmentTypeFactoryImpl(IdGroupingToken, MacroscopicLinkSegmentTypes) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Constructor
MacroscopicLinkSegmentTypeImpl - Class in org.goplanit.network.layer.macroscopic: Each macroscopic link segment is of a particular type reflecting segment specific properties.
MacroscopicLinkSegmentTypeImpl(MacroscopicLinkSegmentTypeImpl) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Copy constructor.
MacroscopicLinkSegmentTypeImpl(IdGroupingToken, String) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Constructor with no value for capacity and max density, so when collected they will provide the default instead
MacroscopicLinkSegmentTypeImpl(IdGroupingToken, String, Double) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Constructor with no value for capacity and max density, so when collected they will provide the default instead
MacroscopicLinkSegmentTypeImpl(IdGroupingToken, String, Double, Double) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Constructor
MacroscopicLinkSegmentTypes - Interface in org.goplanit.utils.network.layer.macroscopic: A container interface for macroscopic link segment types
MacroscopicLinkSegmentTypesImpl - Class in org.goplanit.network.layer.macroscopic: Implementation of the container interface
MacroscopicLinkSegmentTypesImpl(MacroscopicLinkSegmentTypesImpl) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Copy constructor
MacroscopicLinkSegmentTypesImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Constructor
MacroscopicLinkSegmentTypesImpl(IdGroupingToken, MacroscopicLinkSegmentTypeFactory) - Constructor for class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypesImpl: Constructor
MacroscopicNetwork - Class in org.goplanit.network: Macroscopic Network which stores one or more macroscopic network infrastructure layers that together form the complete (intermodal) network.
MacroscopicNetwork(IdGroupingToken) - Constructor for class org.goplanit.network.MacroscopicNetwork: Constructor
MacroscopicNetworkLayer - Interface in org.goplanit.utils.network.layer: Macroscopic physical network layer consisting of nodes, links and macroscopic link segments
MacroscopicNetworkLayerConfigurator - Class in org.goplanit.network: Configurator class that allows one to create and modify a setup for the mapping of modes and macroscopic network layers without actually creating them yet.
MacroscopicNetworkLayerConfigurator() - Constructor for class org.goplanit.network.MacroscopicNetworkLayerConfigurator
MacroscopicNetworkLayerFactory - Interface in org.goplanit.utils.network.layers: Factory interface for creating macroscopic network layers
MacroscopicNetworkLayerFactoryImpl - Class in org.goplanit.network.layer: Factory for creating macroscopic network layer instances
MacroscopicNetworkLayerFactoryImpl(IdGroupingToken, MacroscopicNetworkLayers) - Constructor for class org.goplanit.network.layer.MacroscopicNetworkLayerFactoryImpl: Constructor
MacroscopicNetworkLayerImpl - Class in org.goplanit.network.layer: Macroscopic physical Network (layer) that supports one or more modes and link segment types, where the modes are registered on the network (Infrastructure network) level
MacroscopicNetworkLayerImpl(MacroscopicNetworkLayerImpl) - Constructor for class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Copy constructor
MacroscopicNetworkLayerImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Constructor
MacroscopicNetworkLayerImpl(IdGroupingToken, Nodes, Links, MacroscopicLinkSegments) - Constructor for class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Constructor
MacroscopicNetworkLayers - Interface in org.goplanit.utils.network.layers: interface to manage macroscopic physical network layers, i.e., layers that contain a topologically meaningful representation in the form of nodes and links
MacroscopicNetworkLayersImpl - Class in org.goplanit.network.layers: Implementation of container and factory to manager layers.
MacroscopicNetworkLayersImpl(MacroscopicNetworkLayersImpl) - Constructor for class org.goplanit.network.layers.MacroscopicNetworkLayersImpl: Constructor
MacroscopicNetworkLayersImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layers.MacroscopicNetworkLayersImpl: Constructor
main(String[]) - Static method in class org.goplanit.tntp.TntpMain: Top-level class for running TNTP models
makeClosed2D(Coordinate[]) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: create a copy of the passed in coord array and close it by adding a new coordinate at the end that matches the first.
MALAWI - Static variable in class org.goplanit.utils.locale.CountryNames
MALAYSIA - Static variable in class org.goplanit.utils.locale.CountryNames
MALDIVES - Static variable in class org.goplanit.utils.locale.CountryNames
MALTA - Static variable in class org.goplanit.utils.locale.CountryNames
ManagedGraphEntities<E extends GraphEntity> - Interface in org.goplanit.utils.graph: Container class for any graph entities and a factory to create them
ManagedId - Interface in org.goplanit.utils.id: Interface supporting methods that aid in classes that implement IdAble where this id is based on a generated id via the IdGenerator using class signatures and grouping tokens to manage the id generation for the instances
managedIdClass - Variable in class org.goplanit.utils.id.ManagedIdEntitiesImpl: the class signature used for generating the managed id within the group defined by the token
ManagedIdEntities<E extends ManagedId> - Interface in org.goplanit.utils.id: Container class for any managed id derived entities and a factory to create them
ManagedIdEntitiesImpl<E extends ManagedId> - Class in org.goplanit.utils.id: Base class for containers of managed id entities
ManagedIdEntitiesImpl(Function<E, Long>, Class<? extends ManagedId>) - Constructor for class org.goplanit.utils.id.ManagedIdEntitiesImpl: Constructor
ManagedIdEntitiesImpl(ManagedIdEntitiesImpl<E>) - Constructor for class org.goplanit.utils.id.ManagedIdEntitiesImpl: copy constructor
ManagedIdEntityFactory<E extends ManagedId> - Interface in org.goplanit.utils.id: A base abstract class for factories that create entities with a managed internal id.
ManagedIdEntityFactoryImpl<E extends ManagedId> - Class in org.goplanit.utils.id: Base implementation for creating and registering managed id entities and conducting changes to ids based on the factory settings for generating ids.
ManagedIdEntityFactoryImpl(IdGroupingToken) - Constructor for class org.goplanit.utils.id.ManagedIdEntityFactoryImpl: Constructor
ManualInitialLinkSegmentCost - Class in org.goplanit.cost.physical.initial: Initial Link Segment Cost for which all the link segments have the same cost value for a specified mode
ManualInitialLinkSegmentCost(ManualInitialLinkSegmentCost) - Constructor for class org.goplanit.cost.physical.initial.ManualInitialLinkSegmentCost: Copy constructor
ManualInitialLinkSegmentCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.initial.ManualInitialLinkSegmentCost: Constructor
MapWrapper<K,V> - Interface in org.goplanit.utils.wrapper: Wrap a map as a named class
MapWrapperImpl<K,V> - Class in org.goplanit.utils.wrapper: Abstract Wrapper class implemented for a map instance
MapWrapperImpl(Map<K, V>, Function<V, K>) - Constructor for class org.goplanit.utils.wrapper.MapWrapperImpl: Constructor
MapWrapperImpl(Map<K, V>, Function<V, K>, Collection<V>) - Constructor for class org.goplanit.utils.wrapper.MapWrapperImpl: Constructor
MapWrapperImpl(Map<K, V>, Function<V, K>, MapWrapper<U, V>) - Constructor for class org.goplanit.utils.wrapper.MapWrapperImpl: Special copy(like) constructor allowing one to create a copy with a different index function
MapWrapperImpl(MapWrapperImpl<K, V>) - Constructor for class org.goplanit.utils.wrapper.MapWrapperImpl: Copy constructor
markOsmRelationOuterRoleOsmWayToKeep(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: mark an osm way to be kept even if it is not recognised as as valid PT supporting way.
matchesAnyValueTag(String, String...) - Static method in class org.goplanit.osm.util.OsmTagUtils: Verify if the passed in value tag is present in the list of value tags provided
matchFirst(boolean, Predicate<EdgeSegment>) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Match first link segment of PAS segment to predicate provided
matrixContents - Variable in class org.goplanit.utils.od.OdMatrixImpl: matrix of data values
MatsimIntermodalWriter - Class in org.goplanit.matsim.converter: A class that takes a PLANit intermodal network and writes it as a MATSim intermodal network.
MatsimIntermodalWriter() - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriter: Default constructor using all default settings for underlying writers
MatsimIntermodalWriter(MatsimIntermodalWriterSettings) - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriter: Constructor
MatsimIntermodalWriterFactory - Class in org.goplanit.matsim.converter: Factory for creating PLANitMatsimIntermodalWriters
MatsimIntermodalWriterFactory() - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriterFactory
MatsimIntermodalWriterSettings - Class in org.goplanit.matsim.converter: Settings specific to writing the intermodal related outputs in Matsim format (network and pt)
MatsimIntermodalWriterSettings() - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Default constructor
MatsimIntermodalWriterSettings(String, String) - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Constructor
MatsimIntermodalWriterSettings(String, String, String, String) - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Constructor
MatsimIntermodalWriterSettings(MatsimNetworkWriterSettings, MatsimZoningWriterSettings) - Constructor for class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Constructor
MatsimNetworkWriter - Class in org.goplanit.matsim.converter: A class that takes a PLANit network and writes it as a MATSIM network.
MatsimNetworkWriter() - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriter: Default constructor.
MatsimNetworkWriter(MatsimNetworkWriterSettings) - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriter: Constructor
MatsimNetworkWriterFactory - Class in org.goplanit.matsim.converter: Factory for creating PLANitMatsimWriters
MatsimNetworkWriterFactory() - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriterFactory
MatsimNetworkWriterSettings - Class in org.goplanit.matsim.converter: Settings for the MATSIM writer By default the MATSIM writer will activate all available predefined PLANit modes for writing.
MatsimNetworkWriterSettings(String) - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: constructor
MatsimNetworkWriterSettings(String, String) - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: constructor
MatsimNetworkWriterSettings(String, String, String) - Constructor for class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: constructor
MatsimNetworkXmlAttributes - Class in org.goplanit.matsim.xml: MATSIM network XML attributes used
MatsimNetworkXmlAttributes() - Constructor for class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
MatsimNetworkXmlElements - Class in org.goplanit.matsim.xml: MATSIM network XML elements used
MatsimNetworkXmlElements() - Constructor for class org.goplanit.matsim.xml.MatsimNetworkXmlElements
MatsimTransitXmlAttributes - Class in org.goplanit.matsim.xml: MATSIM transit XML attributes used
MatsimTransitXmlAttributes() - Constructor for class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
MatsimTransitXmlElements - Class in org.goplanit.matsim.xml: MATSIM transit XML elements used
MatsimTransitXmlElements() - Constructor for class org.goplanit.matsim.xml.MatsimTransitXmlElements
MatsimWriter<T> - Class in org.goplanit.matsim.converter: Base class from which all matsim writers derive
MatsimWriter(IdMapperType) - Constructor for class org.goplanit.matsim.converter.MatsimWriter: Constructor
MatsimZoningWriter - Class in org.goplanit.matsim.converter: A class that takes a PLANit zoning and extracts and writes the MATSIM public transport information to disk.
MatsimZoningWriter(MatsimZoningWriterSettings, MatsimNetworkWriterSettings) - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriter: constructor
MatsimZoningWriterFactory - Class in org.goplanit.matsim.converter: Factory for creating PLANitMatsim zoning writers.
MatsimZoningWriterFactory() - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterFactory
MatsimZoningWriterSettings - Class in org.goplanit.matsim.converter: Settings specific to writing the zoning related output in Matsim format (pt)
MatsimZoningWriterSettings() - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Default constructor using default output file name and Global country name
MatsimZoningWriterSettings(String) - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Default constructor
MatsimZoningWriterSettings(String, String) - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Constructor
MatsimZoningWriterSettings(String, String, String) - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Constructor
MatsimZoningWriterSettings(String, String, String, MacroscopicNetwork) - Constructor for class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Constructor
MAURITIUS - Static variable in class org.goplanit.utils.locale.CountryNames
MAX_GAP - Static variable in class org.goplanit.gap.NormBasedGapFunction: maximum gap possible
MAX_SLOPE - org.goplanit.gtfs.enums.GtfsKeyType
MAX_SPEED - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAX_SPEED_BACKWARD - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAX_SPEED_BACKWARD_LANES - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAX_SPEED_FORWARD - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAX_SPEED_FORWARD_LANES - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAX_SPEED_LANES - Static variable in class org.goplanit.osm.tags.OsmSpeedTags
MAXIMUM_DENSITY - org.goplanit.output.property.OutputPropertyType
MAXIMUM_DENSITY - Static variable in interface org.goplanit.utils.network.layer.physical.LinkSegment: Default maximum link density in pcu/km
MAXIMUM_SPEED - org.goplanit.output.property.OutputPropertyType
MAXIMUM_SPEED - org.goplanit.tntp.enums.NetworkFileColumnType
MaximumDensityOutputProperty - Class in org.goplanit.output.property: Maximum density in pcu/km
MaximumDensityOutputProperty() - Constructor for class org.goplanit.output.property.MaximumDensityOutputProperty
maximumDensityPerLanePcuKmLane - Variable in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Maximum density in pcu/km/lane
MaximumSpeedOutputProperty - Class in org.goplanit.output.property
MaximumSpeedOutputProperty() - Constructor for class org.goplanit.output.property.MaximumSpeedOutputProperty
maxSpeedKmH - Variable in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Maximum speed of mode (tied to a road segment type) in km/h
measuredNetworkCost - Variable in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Current system cost as it stands
measuredValue - Variable in class org.goplanit.gap.NormBasedGapFunction: Current value as it stands
MEMORY_OUTPUT_FORMATTER - Static variable in interface org.goplanit.output.formatter.OutputFormatter: Memory output formatter which stores all results in memory rather than persist them to disk
MemoryOutputFormatter - Class in org.goplanit.output.formatter: OutputFormatter which stores data in memory, using specified keys and output properties.
MemoryOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.output.formatter.MemoryOutputFormatter: Constructor
MemoryOutputIterator - Class in org.goplanit.output.formatter: Iterator which loops through the keys and values stored in the MemoryOutputFormatter This class is a wrapper for MultiKeyPlanItDataIterator.
MemoryOutputIterator(MultiKeyPlanItData) - Constructor for class org.goplanit.output.formatter.MemoryOutputIterator: Constructor
mergeLineStrings(LineString, LineString) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: Merge two line strings that are expected to have at least one point in common, in case any input is null or there is no overlap between the two null is returned
METADATA_XSD - Static variable in class org.goplanit.io.xml.util.PlanitSchema
METER - org.goplanit.utils.unit.UnitType
METER - Static variable in interface org.goplanit.utils.unit.Unit: predefined METER DistanceUnit
METER_SECOND - Static variable in interface org.goplanit.utils.unit.Unit: predefined METER/SECOND Unit
MILES - org.goplanit.tntp.enums.LengthUnits
MILES_H - org.goplanit.tntp.enums.SpeedUnits
MILES_PER_HOUR - Static variable in class org.goplanit.osm.tags.OsmSpeedTags: unit addendum for max speed values in miles per hour
MIN_TRANSFER_TIME - org.goplanit.gtfs.enums.GtfsKeyType
MIN_WIDTH - org.goplanit.gtfs.enums.GtfsKeyType
MINI_BUS - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: smaller bus for public transport
MINIATURE - Static variable in class org.goplanit.osm.tags.OsmRailwayTags: miniature railways, not actual railways
MINIMUM_LANES_PER_DIRECTION - Static variable in class org.goplanit.osm.defaults.OsmLaneDefaults: minimum number of lanes per direction, default is 1
minimumNetworkCost - Variable in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Represents the total minimum cost possible
MinMaxPathResult - Interface in org.goplanit.algorithms.shortestpath: Track results of a min-max path tree path execution allowing one to extract both minimum and maximum cost paths along the tree.
MinMaxPathResultImpl - Class in org.goplanit.algorithms.shortestpath: Implementation of the MinMaxPathResult interface
MinMaxPathResultImpl(double[], EdgeSegment[], double[], EdgeSegment[]) - Constructor for class org.goplanit.algorithms.shortestpath.MinMaxPathResultImpl: Constructor
MINUTE - org.goplanit.utils.unit.UnitType
MINUTE - Static variable in interface org.goplanit.utils.unit.Unit: predefined MINUTE TimeUnit
MINUTE_2_HOUR - Static variable in class org.goplanit.utils.unit.TimeUnit: minute to hour conversion multiplier
MINUTE_2_SECOND - Static variable in class org.goplanit.utils.unit.TimeUnit: minute to second conversion multiplier
MINUTES - org.goplanit.tntp.enums.TimeUnits
MNL - Static variable in class org.goplanit.path.choice.logit.LogitChoiceModel: short hand for MNL class type
Mode - Interface in org.goplanit.utils.mode: Interface to represent a mode
MODE_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
MODE_ID - org.goplanit.output.property.OutputPropertyType
MODE_ID_CLASS - Static variable in interface org.goplanit.utils.mode.Mode: id class for generating ids
MODE_XML_ID - org.goplanit.output.property.OutputPropertyType
modeAccessConfiguration - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the default mode access configuration used in case no explicit access information is available on the osmway's tags
modeAccessDefaultsByCountry - Static variable in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: store all defaults per country by ISO2 code
modeAccessProperties - Variable in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Track access properties for each of the modes it supports for quick lookups
ModeData - Class in org.goplanit.assignment.traditionalstatic: Object to store the flows for each mode during the assignment iterations
ModeData(double[]) - Constructor for class org.goplanit.assignment.traditionalstatic.ModeData: Constructor
ModeExternalIdOutputProperty - Class in org.goplanit.output.property
ModeExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.ModeExternalIdOutputProperty
ModeFactory - Interface in org.goplanit.utils.mode: Factory interface for creating mode instances
ModeFactoryImpl - Class in org.goplanit.mode: Factory for creating modes on modes container
ModeFactoryImpl(IdGroupingToken, Modes) - Constructor for class org.goplanit.mode.ModeFactoryImpl: Constructor
ModeFeaturesFactory - Class in org.goplanit.mode: Factory class to create physical and usability features for custom modes
ModeFeaturesFactory() - Constructor for class org.goplanit.mode.ModeFeaturesFactory
ModeIdOutputProperty - Class in org.goplanit.output.property
ModeIdOutputProperty() - Constructor for class org.goplanit.output.property.ModeIdOutputProperty
ModeImpl - Class in org.goplanit.mode: A Mode is a user class feature representing a single form of transport (car, truck etc.).
ModeImpl(IdGroupingToken, double, String, double) - Constructor for class org.goplanit.mode.ModeImpl: Constructor, using all defaults for non-provided parameters
ModeImpl(IdGroupingToken, String, double, double, PhysicalModeFeatures, UsabilityModeFeatures) - Constructor for class org.goplanit.mode.ModeImpl: Constructor, using all defaults for non-provided parameters
modeLanesBackwardKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: <mode>:lanes:backward tags
modeLanesForwardKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: <mode>:lanes:forward tags
modeLanesKeyTags - Variable in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: <mode>:lanes tags
modes - Variable in class org.goplanit.mode.ModeFactoryImpl: modes container to use
Modes - Interface in org.goplanit.utils.mode: container class and factory methods for modes with some
MODES - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
ModesImpl - Class in org.goplanit.mode: Implementation of the Modes interface to create and register modes
ModesImpl(ModesImpl) - Constructor for class org.goplanit.mode.ModesImpl: Copy Constructor
ModesImpl(IdGroupingToken) - Constructor for class org.goplanit.mode.ModesImpl: Constructor
ModesImpl(ModeFactory) - Constructor for class org.goplanit.mode.ModesImpl: Constructor
modeToLayerXmlId - Variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: track mode to layer mapping
ModeXmlIdOutputProperty - Class in org.goplanit.output.property
ModeXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.ModeXmlIdOutputProperty
modifiedLinkSegmentTypeModes - Variable in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes: track all modified link segment types (value) that differ by the allowed modes from the original (key)
ModifiedLinkSegmentTypes - Class in org.goplanit.osm.physical.network.macroscopic: Helper class that tracks all modified, i.e., custom link segment types, that differ from the default link segment types created for open street map road and rail way types.
ModifiedLinkSegmentTypes() - Constructor for class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes
ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes - Class in org.goplanit.osm.physical.network.macroscopic: Track link segment types where only modes are either added or removed compared to their parent link segment type.
ModifiedZoneIdsEvent - Class in org.goplanit.zoning.modifier.event: Wrapper for all events fired with zoning as a source
ModifiedZoneIdsEvent(ZoningModifier, Zoning) - Constructor for class org.goplanit.zoning.modifier.event.ModifiedZoneIdsEvent: Wrapper for a modified zoning ids event indicating that one or more managed internal ids of the zoning have been changed
MOFA - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motorised bicycls with a speed restriction of 25km/h
MONDAY - org.goplanit.gtfs.enums.GtfsKeyType
MONO_RAIL - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
MONO_RAIL - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
MOPED - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motorised bicycls with a speed restriction of 45km/h
MOTOR_BIKE - org.goplanit.utils.mode.PredefinedModeType
MOTOR_BIKE_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.MotorBikeMode
MOTOR_BIKE_USABLITY_FEATURES - Static variable in class org.goplanit.mode.MotorBikeMode
MOTOR_CAR - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motor car part of motorised vehicle category type
MOTOR_CYCLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motor cycle part of motorised vehicle category type
MOTOR_HOME - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: motor home part of motorised vehicle category type
MOTOR_VEHICLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: group indicating any motor vehicle type
MotorBikeMode - Class in org.goplanit.mode: the predefined motor bike mode name: bicycle maxspeed (km/h): 130 pcu: 0.5 vehicular type: VEHICULAR motorisation: NON_MOTORISED track: ROAD use: PRIVATE
MotorBikeMode(IdGroupingToken) - Constructor for class org.goplanit.mode.MotorBikeMode: Constructor for motor bike mode
MotorisationModeType - Enum in org.goplanit.utils.mode: A (vehicular) mode is either motorised or not; part of physical features
MOTORISED - org.goplanit.utils.mode.MotorisationModeType
MOTORWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
MOTORWAY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
MOTORWAY_LINK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
MOTORWAY_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
MOZAMBIQUE - Static variable in class org.goplanit.utils.locale.CountryNames
MSA - Static variable in class org.goplanit.sdinteraction.smoothing.Smoothing: short hand for configuring smoothing with MSA instance
MSASmoothing - Class in org.goplanit.sdinteraction.smoothing: MSA smoothing object
MSASmoothing(MSASmoothing) - Constructor for class org.goplanit.sdinteraction.smoothing.MSASmoothing: Copy constructor
MSASmoothing(IdGroupingToken) - Constructor for class org.goplanit.sdinteraction.smoothing.MSASmoothing: Constructor
MSASmoothingConfigurator - Class in org.goplanit.sdinteraction.smoothing: configurator for MSA smoothing implementation
MSASmoothingConfigurator() - Constructor for class org.goplanit.sdinteraction.smoothing.MSASmoothingConfigurator: Constructor
MultiConverter<T,U> - Class in org.goplanit.converter: Convert multiple PLANit entities parsed by a reader from one format and persisted with a writer to another
MultiConverter(MultiConverterReader<T, U>, MultiConverterWriter<T, U>) - Constructor for class org.goplanit.converter.MultiConverter: constructor
MultiConverterReader<T,U> - Interface in org.goplanit.converter: Interface for classes able to convert entities of multiple types which are then returned
MultiConverterWriter<T,U> - Interface in org.goplanit.converter: Interface for classes able to write a PLANit entities of given type to disk
MultiKeyPlanItData - Class in org.goplanit.data: Class which holds arrays of output property values, identified by arrays of output keys This class is a wrapper for the MultiKeyMap object which is a Map with multiple keys.
MultiKeyPlanItData(OutputProperty[], OutputProperty...) - Constructor for class org.goplanit.data.MultiKeyPlanItData: Constructor
MultiKeyPlanItData(OutputProperty, OutputProperty...) - Constructor for class org.goplanit.data.MultiKeyPlanItData: Constructor
MultiKeyPlanItData(OutputProperty, OutputProperty, OutputProperty...) - Constructor for class org.goplanit.data.MultiKeyPlanItData: Constructor
MultiKeyPlanItData(OutputProperty, OutputProperty, OutputProperty, OutputProperty...) - Constructor for class org.goplanit.data.MultiKeyPlanItData: Constructor
MultiKeyPlanItDataIterator - Interface in org.goplanit.data: Iterator which returns the keys and values for each row in a MultiKeyPlanItData object.
MultiKeyPlanItDataIteratorImpl - Class in org.goplanit.data: Implementation of the MultiKeyPlanItDataIterator interface
MultiKeyPlanItDataIteratorImpl(boolean, IterableMap<Object, Object[]>, MultiKeyMap<Object, Object[]>) - Constructor for class org.goplanit.data.MultiKeyPlanItDataIteratorImpl: Constructor
MultinomialLogit - Class in org.goplanit.path.choice.logit: MNL choice model implementation
MultinomialLogit(MultinomialLogit) - Constructor for class org.goplanit.path.choice.logit.MultinomialLogit: Copy constructor
MultinomialLogit(IdGroupingToken) - Constructor for class org.goplanit.path.choice.logit.MultinomialLogit: Constructor
MultinomialLogitConfigurator - Class in org.goplanit.path.choice.logit: MNL configurator implementations
MultinomialLogitConfigurator() - Constructor for class org.goplanit.path.choice.logit.MultinomialLogitConfigurator: Constructor
MULTIPOLYGON - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags

N

name - Variable in class org.goplanit.graph.EdgeImpl: Name of the edge
name - Variable in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: name of the link segment type
name - Variable in class org.goplanit.network.layer.physical.NodeImpl: name of the node
name - Variable in enum org.goplanit.utils.unit.UnitType
name - Variable in class org.goplanit.zoning.ConnectoidImpl: name of the connectoid if any
name - Variable in class org.goplanit.zoning.TransferZoneGroupImpl: name of the transfer zone group
name - Variable in class org.goplanit.zoning.ZoneImpl: name of the zone
NAME - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
NAME - Static variable in class org.goplanit.osm.tags.OsmTags
NAME - Static variable in class org.goplanit.output.property.CalculatedSpeedOutputProperty
NAME - Static variable in class org.goplanit.output.property.CapacityPerLaneOutputProperty
NAME - Static variable in class org.goplanit.output.property.CostTimesFlowOutputProperty
NAME - Static variable in class org.goplanit.output.property.DensityOutputProperty
NAME - Static variable in class org.goplanit.output.property.DestinationZoneExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.DestinationZoneIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.DestinationZoneXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.DownstreamNodeExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.DownstreamNodeIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.DownstreamNodeLocationOutputProperty
NAME - Static variable in class org.goplanit.output.property.DownstreamNodeXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.FlowOutputProperty: Name of the property
NAME - Static variable in class org.goplanit.output.property.InflowOutputProperty: Name of the property
NAME - Static variable in class org.goplanit.output.property.IterationIndexOutputProperty
NAME - Static variable in class org.goplanit.output.property.LengthOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentCostOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentTypeIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentTypeNameOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentTypeXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.LinkSegmentXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.MaximumDensityOutputProperty
NAME - Static variable in class org.goplanit.output.property.MaximumSpeedOutputProperty
NAME - Static variable in class org.goplanit.output.property.ModeExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.ModeIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.ModeXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.NumberOfLanesOutputProperty
NAME - Static variable in class org.goplanit.output.property.OdCostOutputProperty
NAME - Static variable in class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.OriginZoneIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.OutflowOutputProperty: Name of the property
NAME - Static variable in class org.goplanit.output.property.PathIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.PathOutputStringProperty
NAME - Static variable in class org.goplanit.output.property.RunIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.TimePeriodExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.TimePeriodIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.UpstreamNodeIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
NAME - Static variable in class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
NAME - Static variable in class org.goplanit.output.property.VcRatioOutputProperty
NAMESPACE_OPENGIS_PREFIX - Static variable in class org.goplanit.io.xml.util.PlanitNamespacePrefixMapper
NAMESPACE_OPENGIS_URI - Static variable in class org.goplanit.io.xml.util.PlanitNamespacePrefixMapper
NAMIBIA - Static variable in class org.goplanit.utils.locale.CountryNames
NARROW_GAUGE - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
NARROW_GAUGE - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
NAURU - Static variable in class org.goplanit.utils.locale.CountryNames
NEGATIVE_ACCESS_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmAccessTags: no none private destination delivery customers use_sidepath separate dismount discouraged
NEPAL - Static variable in class org.goplanit.utils.locale.CountryNames
NETHERLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
NETHERLANDS_RDS - Static variable in class org.goplanit.utils.epsg.EpsgCodesByCountry: Area of use: Netherlands, Rijks Driehoek Stelsel, EPSG:28992
network - Variable in class org.goplanit.io.converter.zoning.PlanitZoningReader: the network this zoning relates to
Network - Class in org.goplanit.network: Base class for any network.
Network(Network) - Constructor for class org.goplanit.network.Network: Copy constructor
Network(IdGroupingToken) - Constructor for class org.goplanit.network.Network: Constructor
NETWORK - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlElements
NETWORK_XSD_FILE - Static variable in class org.goplanit.io.converter.network.PlanitNetworkReader: Default XSD files used to validate input XML files against, TODO: move to properties file
NetworkConverter - Class in org.goplanit.converter.network: Network converter class able to convert a network from one type to another
NetworkConverter(NetworkReader, NetworkWriter) - Constructor for class org.goplanit.converter.network.NetworkConverter: constructor
NetworkConverterFactory - Class in org.goplanit.converter.network: Factory class for creating network converters
NetworkConverterFactory() - Constructor for class org.goplanit.converter.network.NetworkConverterFactory
NetworkFileColumnType - Enum in org.goplanit.tntp.enums: Enumeration giving roles of columns in TNTP network input file
NetworkFlowUpdateData - Class in org.goplanit.assignment.ltm.sltm.consumer: Base class to aid updating of the network link flows during loading.
NetworkFlowUpdateData(NetworkLoadingFactorData) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.NetworkFlowUpdateData: constructor, special case where link sending flows are not to be updated
NetworkFlowUpdateData(SendingFlowData, NetworkLoadingFactorData) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.NetworkFlowUpdateData: constructor
networkIdGroupingToken - Variable in class org.goplanit.network.Network: a token for this network in particular to ensure unique ids across all entities of the same class instance within this network
networkLayerLinks - Variable in class org.goplanit.network.layer.service.ServiceLegImpl: Service leg's underlying links connecting its two service nodes
NetworkLoading - Class in org.goplanit.supply.networkloading: Network loading traffic component
NetworkLoading(NetworkLoading) - Constructor for class org.goplanit.supply.networkloading.NetworkLoading: Copy Constructor
NetworkLoading(IdGroupingToken) - Constructor for class org.goplanit.supply.networkloading.NetworkLoading: Base constructor
networkLoadingFactorData - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: tracks flow acceptance factors as well as its two related other factors, storage and capacity factors
NetworkLoadingFactorData - Class in org.goplanit.assignment.ltm.sltm.loading: Track the sLTM variables representing the various factors used: flow acceptance factors (alphas) flow capacity factors (betas) storage capacity factors (gammas)
NetworkLoadingFactorData(int) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Constructor
networkLoadingLinkSegmentInflowUpdate(double[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: Conduct a network loading to compute updated inflow rates (without tracking turn flows): Eq.
networkLoadingLinkSegmentInflowUpdate(double[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingPath: Conduct a network loading to compute updated inflow rates (without tracking turn flows): Eq.
networkLoadingLinkSegmentInflowUpdate(double[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Conduct a network loading to compute updated inflow rates (without tracking turn flows): Eq.
networkLoadingTurnFlowUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: Conduct a network loading to compute updated turn inflow rates u_ab: Eq.
networkLoadingTurnFlowUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingPath: Conduct a network loading to compute updated turn inflow rates u_ab: Eq.
networkLoadingTurnFlowUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Conduct a network loading to compute updated turn inflow rates u_ab: Eq.
networkNode - Variable in class org.goplanit.network.layer.service.ServiceNodeImpl: underlying network node
NetworkReader - Interface in org.goplanit.converter.network: Interface to read a PLANit network
NetworkReaderImpl - Class in org.goplanit.converter.network: A network reader implementation with built-in convenience containers that maps ids used by the external data source to relate entities to each other to the created PLANit entries.
NetworkReaderImpl() - Constructor for class org.goplanit.converter.network.NetworkReaderImpl: Constructor
networkSettings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: the network settings to use
networkSettings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: the network settings to use
networkSettings - Variable in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: the network settings to use
networkSettings - Variable in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: the network settings to use
networkToPopulate - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: the network to populate
NetworkTurnFlowUpdateData - Class in org.goplanit.assignment.ltm.sltm.consumer: Base class to aid updating of the network turn flows during loading.
NetworkTurnFlowUpdateData(boolean, SendingFlowData, SplittingRateData, NetworkLoadingFactorData) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: constructor
NetworkTurnFlowUpdateData(boolean, SplittingRateData, NetworkLoadingFactorData) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: constructor where sending flows are not to be updated
NetworkWriter - Interface in org.goplanit.converter.network: Interface to write a PLANit network to disk
NEW_ZEALAND - Static variable in class org.goplanit.utils.locale.CountryNames
NEWELL - Static variable in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: short hand for Newell fundamental diagram class type
NewellFundamentalDiagram - Class in org.goplanit.supply.fundamentaldiagram: Implementation of a Newell (triangular) fundamental diagram for a road section (link segment)
NewellFundamentalDiagram(double) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Constructor using all defaults except for the free speed to apply
NewellFundamentalDiagram(double, double) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Constructor using all defaults except for the free speed to apply
NewellFundamentalDiagram(double, double, double) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Constructor using all defaults except for the free speed to apply
NewellFundamentalDiagram(LinearFundamentalDiagramBranch, LinearFundamentalDiagramBranch) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Constructor using all defaults except for the free speed to apply
NewellFundamentalDiagram(NewellFundamentalDiagram) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Copy constructor
NewellFundamentalDiagramComponent - Class in org.goplanit.supply.fundamentaldiagram: Newell fundamental diagram traffic component
NewellFundamentalDiagramComponent(NewellFundamentalDiagramComponent) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Copy constructor
NewellFundamentalDiagramComponent(IdGroupingToken) - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Constructor
NewellFundamentalDiagramConfigurator - Class in org.goplanit.supply.fundamentaldiagram: Configurator for Newell Fundamental diagram implementation.
NewellFundamentalDiagramConfigurator() - Constructor for class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramConfigurator: Constructor
next() - Method in interface org.goplanit.data.MultiKeyPlanItDataIterator: Returns the next array of keys in the iteration
next() - Method in class org.goplanit.data.MultiKeyPlanItDataIteratorImpl: Advances the iteration and returns the next array of keys in the iteration
next() - Method in class org.goplanit.output.formatter.MemoryOutputIterator: Returns the next array of keys in the iteration
next() - Method in class org.goplanit.utils.od.OdHashedIterator
next() - Method in class org.goplanit.utils.od.OdMatrixIterator
NO - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: no tag
NO - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
NO - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
NO - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
NO - Static variable in class org.goplanit.osm.tags.OsmTags
NO_VEHICLE - org.goplanit.utils.mode.VehicularModeType
Node - Interface in org.goplanit.utils.network.layer.physical: Node is a vertex but not all vertices are nodes.
NODE - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlElements
NODE_EXTERNAL_ID - org.goplanit.output.enums.PathOutputIdentificationType
NODE_ID - org.goplanit.output.enums.PathOutputIdentificationType
NODE_ID_CLASS - Static variable in interface org.goplanit.utils.network.layer.physical.Node: id class for generating ids
NODE_XML_ID - org.goplanit.output.enums.PathOutputIdentificationType
nodeAccessDownstream - Variable in class org.goplanit.zoning.DirectedConnectoidImpl: the node access given an access edge segment is either up or downstream
NodeFactory - Interface in org.goplanit.utils.network.layer.physical: Factory interface for creating node instances
NodeFactoryImpl - Class in org.goplanit.network.layer.physical: Factory for creating nodes on nodes container
NodeFactoryImpl(IdGroupingToken, Nodes) - Constructor for class org.goplanit.network.layer.physical.NodeFactoryImpl: Constructor
nodeId - Variable in class org.goplanit.network.layer.physical.NodeImpl: Unique node identifier
NodeImpl - Class in org.goplanit.network.layer.physical: Node representation connected to one or more entry and exit links
NodeImpl(NodeImpl) - Constructor for class org.goplanit.network.layer.physical.NodeImpl: Copy constructor, see also VertexImpl
NodeImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.physical.NodeImpl: Node constructor
nodeLocationEquals2D(OsmNode, Coordinate) - Static method in class org.goplanit.osm.util.OsmNodeUtils: Verify if the location of the provided coordinate equals the node's location
NodeModel - Interface in org.goplanit.algorithms.nodemodel: Node model algorithm base interface
NodeModelComponent - Class in org.goplanit.supply.network.nodemodel: Node model traffic component
NodeModelComponent(NodeModelComponent) - Constructor for class org.goplanit.supply.network.nodemodel.NodeModelComponent: Copy constructor
NodeModelComponent(IdGroupingToken) - Constructor for class org.goplanit.supply.network.nodemodel.NodeModelComponent: Base constructor
NodeModelConfigurator<T extends NodeModelComponent> - Class in org.goplanit.supply.network.nodemodel: Base class for all node model configurator implementations
NodeModelConfigurator(Class<T>) - Constructor for class org.goplanit.supply.network.nodemodel.NodeModelConfigurator: Constructor
NodeModelConfiguratorFactory - Class in org.goplanit.supply.network.nodemodel: factory for the node model types supported directory by PLANit
NodeModelConfiguratorFactory() - Constructor for class org.goplanit.supply.network.nodemodel.NodeModelConfiguratorFactory
Nodes - Interface in org.goplanit.utils.network.layer.physical: Container class for primary managed nodes container and access to factory to create and register them on this instance
NODES - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlElements
NodesImpl - Class in org.goplanit.network.layer.physical: Nodes primary managed container implementation
NodesImpl(NodesImpl) - Constructor for class org.goplanit.network.layer.physical.NodesImpl: Copy constructor
NodesImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.physical.NodesImpl: Constructor
NodesImpl(IdGroupingToken, NodeFactory) - Constructor for class org.goplanit.network.layer.physical.NodesImpl: Constructor
NON_MOTORISED - org.goplanit.utils.mode.MotorisationModeType
NON_RAILBASED_OSM_RAILWAY_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmRailwayTags: the OSM railway values that are marked as non-rail types, i.e., they can never be activated to be converted into links
NON_ROADBASED_HIGHWAY_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmHighwayTags: the OSM highway values that are marked as non-road types, i.e., they can never be activated to be converted into links
NONE - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
NONE - org.goplanit.osm.util.OsmPtVersionScheme
NONE - org.goplanit.output.enums.OdSkimSubOutputType
NONE - org.goplanit.utils.unit.UnitGroup
NONE - org.goplanit.utils.unit.UnitType
NONE - org.goplanit.utils.zoning.ConnectoidType
NONE - org.goplanit.utils.zoning.TransferZoneType
NONE - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: no tag
NONE - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
NONE - Static variable in class org.goplanit.osm.tags.OsmTags
NONE - Static variable in interface org.goplanit.utils.unit.Unit
NoneUnit - Class in org.goplanit.utils.unit: Simple unit that comprises a single unit
NoneUnit() - Constructor for class org.goplanit.utils.unit.NoneUnit: Constructor
nonUrbanHighwayDefaults - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: non-urban highway speed limit defaults
norm - Variable in class org.goplanit.gap.NormBasedGapFunction: which norm we are taking, e.g.
NORM_BASED_GAP - Static variable in class org.goplanit.gap.GapFunction: short code for a norm based gap function type
NormBasedGapConfigurator - Class in org.goplanit.gap: Norm based gap function configurator
NormBasedGapConfigurator() - Constructor for class org.goplanit.gap.NormBasedGapConfigurator: Constructor
NormBasedGapFunction - Class in org.goplanit.gap: Gap function based on the norm, e.g.
NormBasedGapFunction(NormBasedGapFunction) - Constructor for class org.goplanit.gap.NormBasedGapFunction: Copy constructor
NormBasedGapFunction(IdGroupingToken, StopCriterion) - Constructor for class org.goplanit.gap.NormBasedGapFunction: Constructor with defaults for norm and averaged
NormBasedGapFunction(IdGroupingToken, StopCriterion, int) - Constructor for class org.goplanit.gap.NormBasedGapFunction: Constructor with default for averaged
NormBasedGapFunction(IdGroupingToken, StopCriterion, int, boolean) - Constructor for class org.goplanit.gap.NormBasedGapFunction: Constructor
NOT_SPECIFIED - Static variable in interface org.goplanit.output.formatter.OutputFormatter: Constant to report that an output value has not been set
NotNull - Class in org.goplanit.utils.predicate: NotNull predicate
NotNull() - Constructor for class org.goplanit.utils.predicate.NotNull
NT_CATEGORY - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
NT_TYPE - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
NullaryDoubleSupplier - Class in org.goplanit.utils.function: Lightweight Nullaryfunction implementation to supply doubles in the form of a NullaryFunction<Double> compatible with OjAlgo
NullaryDoubleSupplier(double) - Constructor for class org.goplanit.utils.function.NullaryDoubleSupplier: Constructor for double supplier compatible with Nullaryfunction<Double> of OjAlgo
NUMBER_OF_LANES - org.goplanit.output.property.OutputPropertyType
NUMBER_OF_LANES - org.goplanit.tntp.enums.NetworkFileColumnType
NUMBER_OF_LINKS_INDICATOR - Static variable in class org.goplanit.tntp.TntpHeaderConstants
NUMBER_OF_NODES_INDICATOR - Static variable in class org.goplanit.tntp.TntpHeaderConstants
NUMBER_OF_ZONES_INDICATOR - Static variable in class org.goplanit.tntp.TntpHeaderConstants
numberOfEdgeSegments - Variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: The number of edge segments considered
numberOfEdgeSegments - Variable in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: The number of edge segments considered
numberOfLanes - Variable in class org.goplanit.network.layer.physical.LinkSegmentImpl: segment's number of lanes
NumberOfLanesOutputProperty - Class in org.goplanit.output.property
NumberOfLanesOutputProperty() - Constructor for class org.goplanit.output.property.NumberOfLanesOutputProperty
numberOfListeners(EventType) - Method in class org.goplanit.utils.event.EventProducerImpl: Determine the number of listeners for a given event type
numberOfVertices - Variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: The number of vertices in the network
numberOfVertices - Variable in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: The number of vertices in the network

O

OD - org.goplanit.output.enums.OutputType
OD_COST - org.goplanit.output.property.OutputPropertyType
OD_ZONE_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.OdZone: the class to use for the additional od zone id generation
odConnectoids - Variable in class org.goplanit.zoning.Zoning: provide access to undirected connectoids (of od zones)
OdCostOutputProperty - Class in org.goplanit.output.property
OdCostOutputProperty() - Constructor for class org.goplanit.output.property.OdCostOutputProperty
OdData<T> - Interface in org.goplanit.utils.od: Interface defining methods for objects which store data related to origin and destination
OdDataImpl<T> - Class in org.goplanit.utils.od: Base class containing common methods required by all classes which implement ODData
OdDataImpl(Class<? extends IdAble>, IdGroupingToken, OdZones) - Constructor for class org.goplanit.utils.od.OdDataImpl: Constructor
OdDataImpl(OdDataImpl<T>) - Constructor for class org.goplanit.utils.od.OdDataImpl: Copy Constructor
OdDataIterator<T> - Interface in org.goplanit.utils.od: Defines methods for an iterator which moves through a matrix of origin-destination cells
OdDemandMatrix - Class in org.goplanit.od.demand: This class handles the OD demand matrix.
OdDemandMatrix(OdDemandMatrix) - Constructor for class org.goplanit.od.demand.OdDemandMatrix: Copy constructor
OdDemandMatrix(OdZones) - Constructor for class org.goplanit.od.demand.OdDemandMatrix: Constructor
OdDemandMatrix.OdDemandMatrixIterator - Class in org.goplanit.od.demand: Wrapper around primitive matrix iterator
OdDemandMatrixIterator(OdDemandMatrix) - Constructor for class org.goplanit.od.demand.OdDemandMatrix.OdDemandMatrixIterator
OdDemands - Interface in org.goplanit.od.demand: OdData representing Origin-Destination demands without a specific container reference so a general typed definition of OdDemands can be used for access
odDemandsByTimePeriodAndMode - Variable in class org.goplanit.demands.Demands: Trip demand matrices
OdHashed<T> - Interface in org.goplanit.utils.od: This interface represents a hashed based implementation for handling origin-demand matrices of a certain type where the data is modelled by a single hash key generated from the OD zone information
OdHashedImpl<T> - Class in org.goplanit.utils.od: This class stores paths by their origin and destination by creating a unique hash for the combined ids of the od zones.
OdHashedImpl(Class<? extends IdAble>, IdGroupingToken, OdZones) - Constructor for class org.goplanit.utils.od.OdHashedImpl: Constructor
OdHashedImpl(OdHashedImpl<T>) - Constructor for class org.goplanit.utils.od.OdHashedImpl: Copy constructor (shallow copy of contents)
OdHashedIterator<T> - Class in org.goplanit.utils.od: Base Hash key oriented Iterator which runs through available ods that have non-zero values
OdHashedIterator(OdHashed<T>, OdZones) - Constructor for class org.goplanit.utils.od.OdHashedIterator: Constructor
OdMatrix<T,U> - Interface in org.goplanit.utils.od: This class contains common methods for handling origin-demand matrices of a certain type where the entire matrix is modelled even if some combinations of ODs do not contain any data.
OdMatrixImpl<T,U> - Class in org.goplanit.utils.od: This class contains common methods for handling origin-demand matrices.
OdMatrixImpl(Class<? extends IdAble>, IdGroupingToken, OdZones, U) - Constructor for class org.goplanit.utils.od.OdMatrixImpl: Constructor for Od matrix containing primitives, i.e.
OdMatrixImpl(OdMatrixImpl<T, U>) - Constructor for class org.goplanit.utils.od.OdMatrixImpl: Copy Constructor (shallow copy of matrix contents)
OdMatrixIterator<T,U> - Class in org.goplanit.utils.od: BAse matrix oriented Iterator which runs through rows and columns of some matrix type of container, making the value, row and column of each cell available
OdMatrixIterator(U, OdZones) - Constructor for class org.goplanit.utils.od.OdMatrixIterator: Constructor
OdNonPrimitiveMatrix<T> - Class in org.goplanit.utils.od: This class contains common methods for handling origin-demand matrices where values are non primitive types, i.e.
OdNonPrimitiveMatrix(Class<? extends IdAble>, IdGroupingToken, OdZones, T[][]) - Constructor for class org.goplanit.utils.od.OdNonPrimitiveMatrix: Constructor for full Od matrix containing non-primitives, i.e.
OdNonPrimitiveMatrix(OdNonPrimitiveMatrix<T>) - Constructor for class org.goplanit.utils.od.OdNonPrimitiveMatrix: Copy constructor
OdNonPrimitiveMatrixIterator<T> - Class in org.goplanit.utils.od: Iterator of OdMatrix with objects stored as raw two dimensional array
OdNonPrimitiveMatrixIterator(T[][], OdZones) - Constructor for class org.goplanit.utils.od.OdNonPrimitiveMatrixIterator: Constructor
OdOutputTypeAdapter - Interface in org.goplanit.output.adapter: Interface defining the methods required for an Origin-Destination output adapter
OdOutputTypeAdapterImpl - Class in org.goplanit.output.adapter: Top-level abstract class which defines the common methods required by OD output type adapters
OdOutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.OdOutputTypeAdapterImpl: Constructor
OdOutputTypeConfiguration - Class in org.goplanit.output.configuration: The configuration for the origin-destination output type.
OdOutputTypeConfiguration() - Constructor for class org.goplanit.output.configuration.OdOutputTypeConfiguration: Constructor Define the default output properties here.
OdPathIterator - Interface in org.goplanit.od.path: Iterator for directed paths tracked by od
odPathMatrices - Variable in class org.goplanit.path.OdPathSets: map holding all registered od path matrices by their unique id
OdPathMatrix - Class in org.goplanit.od.path: This class stores the path objects from each origin to each destination in a full matrix form
OdPathMatrix(OdPathMatrix) - Constructor for class org.goplanit.od.path.OdPathMatrix: Copy constructor (shallow copy of matrix contents)
OdPathMatrix(IdGroupingToken, OdZones) - Constructor for class org.goplanit.od.path.OdPathMatrix: Constructor
OdPathMatrix.OdPathMatrixIterator - Class in org.goplanit.od.path: Wrapper around primitive matrix iterator
OdPathMatrixIterator(OdPathMatrix) - Constructor for class org.goplanit.od.path.OdPathMatrix.OdPathMatrixIterator
OdPaths - Interface in org.goplanit.od.path: A container class for Origin-Destination paths.
odPathSet - Variable in class org.goplanit.path.choice.StochasticPathChoice: The registered od path set instance
odPathSets - Variable in class org.goplanit.project.CustomPlanItProject: The registered OD path sets
odPathSets - Variable in class org.goplanit.project.PlanItProjectInput: The registered OD path sets
OdPathSets - Class in org.goplanit.path: Contains one or more origin-destination based path sets that can be used in assignment.
OdPathSets(OdPathSets) - Constructor for class org.goplanit.path.OdPathSets: Constructor
OdPathSets(IdGroupingToken) - Constructor for class org.goplanit.path.OdPathSets: Constructor
OdPathsHashed - Class in org.goplanit.od.path: This class stores paths by their origin and destination by creating a unique hash for the combined ids of the od zones.
OdPathsHashed(OdPathsHashed) - Constructor for class org.goplanit.od.path.OdPathsHashed: Copy constructor (shallow copy of contents)
OdPathsHashed(IdGroupingToken, OdZones) - Constructor for class org.goplanit.od.path.OdPathsHashed: Constructor
OdPathsHashed.OdPathsHashedIterator - Class in org.goplanit.od.path: Wrapper around hashed iterator for od paths
OdPathsHashedIterator(OdPathsHashed) - Constructor for class org.goplanit.od.path.OdPathsHashed.OdPathsHashedIterator
OdPrimitiveMatrix<T extends Number> - Class in org.goplanit.utils.od: This class contains common methods for handling origin-demand matrices.
OdPrimitiveMatrix(Class<? extends IdAble>, IdGroupingToken, OdZones, Array2D<T>) - Constructor for class org.goplanit.utils.od.OdPrimitiveMatrix: Constructor for Od matrix containing primitives, i.e.
OdPrimitiveMatrix(OdPrimitiveMatrix<T>) - Constructor for class org.goplanit.utils.od.OdPrimitiveMatrix: Copy Constructor
OdPrimitiveMatrixIterator<T extends Number> - Class in org.goplanit.utils.od: Iterator of OdMatrix with primitives stored as Array2D
OdPrimitiveMatrixIterator(Array2D<T>, OdZones) - Constructor for class org.goplanit.utils.od.OdPrimitiveMatrixIterator: Constructor
OdSkimMatrix - Class in org.goplanit.od.skim: This class stores an OD Skim matrix.
OdSkimMatrix(OdSkimMatrix) - Constructor for class org.goplanit.od.skim.OdSkimMatrix: copy constructor
OdSkimMatrix(OdZones, OdSkimSubOutputType) - Constructor for class org.goplanit.od.skim.OdSkimMatrix: Constructor
OdSkimMatrix.OdSkimMatrixIterator - Class in org.goplanit.od.skim: Wrapper around primitive matrix iterator
OdSkimMatrixIterator(OdSkimMatrix) - Constructor for class org.goplanit.od.skim.OdSkimMatrix.OdSkimMatrixIterator
OdSkimSubOutputType - Enum in org.goplanit.output.enums: Enumeration of possible values of OD Skim Output Type
OdZone - Interface in org.goplanit.utils.zoning: an OdZone is a zone where trips terminate and or commence
OdZoneFactory - Interface in org.goplanit.utils.zoning: Factory interface for directed connectoids
OdZoneFactoryImpl - Class in org.goplanit.zoning: Factory for creating od zones (on container)
OdZoneFactoryImpl(IdGroupingToken, OdZones) - Constructor for class org.goplanit.zoning.OdZoneFactoryImpl: Constructor
OdZoneImpl - Class in org.goplanit.zoning: An Od zone
OdZoneImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.OdZoneImpl: constructor
OdZoneImpl(OdZoneImpl) - Constructor for class org.goplanit.zoning.OdZoneImpl: Copy constructor
odZones - Variable in class org.goplanit.zoning.OdZoneFactoryImpl: container to use
odZones - Variable in class org.goplanit.zoning.Zoning: provide access to zones
OdZones - Interface in org.goplanit.utils.zoning: Container class for OdZones
OdZonesImpl - Class in org.goplanit.zoning: implementation of the Zones <T> interface for Od zones
OdZonesImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.OdZonesImpl: Constructor
OdZonesImpl(OdZoneFactory) - Constructor for class org.goplanit.zoning.OdZonesImpl: Constructor
OdZonesImpl(OdZonesImpl) - Constructor for class org.goplanit.zoning.OdZonesImpl: Copy constructor
of(A, B) - Static method in class org.goplanit.utils.misc.Pair: Factory method
of(BufferedInputStream, FileInputStream) - Static method in class org.goplanit.utils.zip.PlanitZipInputStream: create PLANit zip input stream containing all input streams that need to remain in scope for the input stream to be accessible
of(String) - Static method in class org.goplanit.output.property.OutputProperty: Generate the appropriate BaseOutputProperty object from a specified class name
of(ZipFile, ZipEntry) - Static method in class org.goplanit.utils.zip.PlanitZipFileInputStream: create PLANit zip input stream containing all input streams that need to remain in scope for the input stream to be accessible
of(OutputPropertyType) - Static method in class org.goplanit.output.property.OutputProperty: Generate the appropriate BaseOutputProperty object from a specified enumeration value
of(UnitType) - Static method in interface org.goplanit.utils.unit.Unit: Create unit based on given type
of(UnitType[], UnitType[]) - Static method in interface org.goplanit.utils.unit.Unit: Create unit based on given types
ON_STREET_LAYER_XML_ID - Static variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: proposed on_street layer id
onBreakEdge(Edge, Edge) - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeHandler: Perform action by syncing XML ids to ids
onCompletion() - Method in interface org.goplanit.utils.graph.modifier.RemoveSubGraphListener: callback after completing all subgraph removals
onCompletion() - Method in class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: callback after completing all subgraph removals
onDirectedGraphModificationEvent(DirectedGraphModificationEvent) - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeSegmentHandler
onDirectedGraphModificationEvent(DirectedGraphModificationEvent) - Method in interface org.goplanit.utils.graph.modifier.event.DirectedGraphModifierListener: Notify method for directed graph modification events
onDirectedGraphModificationEvent(DirectedGraphModificationEvent) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: Notify method for directed graph modification events
onDirectedGraphModificationEvent(DirectedGraphModificationEvent) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateDirectedConnectoidsOnBreakLinkSegmentHandler: Notify method for directed graph modification events
ONE - Static variable in class org.goplanit.utils.function.NullaryDoubleSupplier: Create supplier that delivers 1 value
ONE_WAY_AB - Static variable in class org.goplanit.tntp.converter.network.TntpNetworkReader
ONE_WAY_BA - Static variable in class org.goplanit.tntp.converter.network.TntpNetworkReader
ONE_WAY_REVERSE_DIRECTION - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
OneToAllShortestPathAlgorithm - Interface in org.goplanit.algorithms.shortestpath: An algorithm which calculates the shortest (a.k.a.
OneToOneShortestPathAlgorithm - Interface in org.goplanit.algorithms.shortestpath: An algorithm which calculates the shortest (a.k.a.
ONEWAY - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
ONEWAY_LOCATION_BASED_CYCLEWAY_KEY_TAGS - Static variable in class org.goplanit.osm.tags.OsmBicycleTags: cycleway:left:oneway cycleway:right:oneway
onGraphModificationEvent(GraphModificationEvent) - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeHandler: Notify method for graph modification events
onGraphModificationEvent(GraphModificationEvent) - Method in class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeSegmentHandler: Notify method for graph modification events
onGraphModificationEvent(GraphModificationEvent) - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierListener: Notify method for graph modification events
onGraphModificationEvent(GraphModificationEvent) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: Notify method for graph modification events
onGraphModificationEvent(GraphModificationEvent) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateDirectedConnectoidsOnBreakLinkSegmentHandler: Notify method for graph modification events
onPlanitComponentEvent(PlanitComponentEvent) - Method in interface org.goplanit.component.event.PlanitComponentListener: Notify method for PLANit component events.
onPlanitComponentEvent(PlanitComponentEvent) - Method in class org.goplanit.component.PlanitComponent: Act upon the provided event.
onPlanitComponentEvent(PlanitComponentEvent) - Method in class org.goplanit.io.input.PlanItInputBuilder: Whenever a project component is created this method will be invoked
onPlanitComponentEvent(PlanitComponentEvent) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Registered for PopulateFundamentalDiagramEvent which allows the component to initialise all the default available Fds based on the network layer it is registered for.
onPlanitComponentEvent(PlanitComponentEvent) - Method in class org.goplanit.tntp.input.TntpInputBuilder: Whenever a project component is created this method will be invoked
onRemoveSubGraphEdge(Edge) - Method in interface org.goplanit.utils.graph.modifier.RemoveSubGraphListener: callback whenever an edge is removed from a subgraph it is part of
onRemoveSubGraphEdge(Edge) - Method in class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: callback whenever an edge is removed from a subgraph it is part of
onRemoveSubGraphEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.modifier.RemoveDirectedSubGraphListener: callback whenever an edge segment is removed from a subgraph it is part of
onRemoveSubGraphVertex(Vertex) - Method in interface org.goplanit.utils.graph.modifier.RemoveSubGraphListener: callback whenever a vertex is removed from a subgraph it is part of
onRemoveSubGraphVertex(Vertex) - Method in class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: callback whenever a vertex is removed from a subgraph it is part of
onZoningModifierEvent(ZoningModificationEvent) - Method in interface org.goplanit.utils.zoning.modifier.event.ZoningModifierListener: Notify method for zoning modification events
onZoningModifierEvent(ZoningModificationEvent) - Method in class org.goplanit.zoning.ConnectoidsImpl: Support event callbacks whenever zones have been modified
onZoningModifierEvent(ZoningModificationEvent) - Method in class org.goplanit.zoning.TransferZoneGroupsImpl: Notify method for zoning modification events
openCsvFileAndWriteHeaders(OutputTypeConfiguration, String) - Method in class org.goplanit.output.formatter.CsvFileOutputFormatter: Open the CSV output file and write the headers to it
OPPOSITE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
OPPOSITE_LANE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
OPPOSITE_LANE - Static variable in class org.goplanit.osm.tags.OsmBusWayTags
OPPOSITE_LANE - Static variable in class org.goplanit.osm.tags.OsmLaneTags: e.g.
OPPOSITE_SHARE_BUSWAY - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
OPPOSITE_TRACK - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
optional() - Static method in class org.goplanit.gtfs.util.GtfsFileConditions: Create a file condition indicating it is optional
orderedLegSegments - Variable in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Ordered list of leg segments for this trip from start to end
org.goplanit - package org.goplanit
org.goplanit.algorithms.nodemodel - package org.goplanit.algorithms.nodemodel: Node model algorithms for PlanIt
org.goplanit.algorithms.shortestpath - package org.goplanit.algorithms.shortestpath: Shortest Path algorithms for PlanIt
org.goplanit.assignment - package org.goplanit.assignment: Traffic assignment classes
org.goplanit.assignment.algorithmb - package org.goplanit.assignment.algorithmb
org.goplanit.assignment.ltm - package org.goplanit.assignment.ltm
org.goplanit.assignment.ltm.eltm - package org.goplanit.assignment.ltm.eltm
org.goplanit.assignment.ltm.eltm.event - package org.goplanit.assignment.ltm.eltm.event
org.goplanit.assignment.ltm.sltm - package org.goplanit.assignment.ltm.sltm
org.goplanit.assignment.ltm.sltm.consumer - package org.goplanit.assignment.ltm.sltm.consumer
org.goplanit.assignment.ltm.sltm.loading - package org.goplanit.assignment.ltm.sltm.loading
org.goplanit.assignment.traditionalstatic - package org.goplanit.assignment.traditionalstatic
org.goplanit.component - package org.goplanit.component
org.goplanit.component.event - package org.goplanit.component.event
org.goplanit.converter - package org.goplanit.converter
org.goplanit.converter.demands - package org.goplanit.converter.demands
org.goplanit.converter.intermodal - package org.goplanit.converter.intermodal
org.goplanit.converter.network - package org.goplanit.converter.network
org.goplanit.converter.service - package org.goplanit.converter.service
org.goplanit.converter.zoning - package org.goplanit.converter.zoning
org.goplanit.cost - package org.goplanit.cost: Contains the definitions of cost classes
org.goplanit.cost.physical - package org.goplanit.cost.physical: Contains the definition of physical cost classes
org.goplanit.cost.physical.initial - package org.goplanit.cost.physical.initial: Initial Physical Cost objects
org.goplanit.cost.virtual - package org.goplanit.cost.virtual: Contains the definitions of virtual cost classes
org.goplanit.data - package org.goplanit.data: Data used for calculation during iterations of the traffic assignment
org.goplanit.demands - package org.goplanit.demands: Classes which manage traveler demands
org.goplanit.gap - package org.goplanit.gap: Gap functions and criteria used to test for convergence of the assignment algorithms
org.goplanit.geo - package org.goplanit.geo: Common classes to perform actions on OpenGIS spatial data
org.goplanit.graph - package org.goplanit.graph: Network component object classes
org.goplanit.graph.directed - package org.goplanit.graph.directed
org.goplanit.graph.directed.acyclic - package org.goplanit.graph.directed.acyclic
org.goplanit.graph.modifier - package org.goplanit.graph.modifier
org.goplanit.graph.modifier.event - package org.goplanit.graph.modifier.event
org.goplanit.graph.modifier.event.handler - package org.goplanit.graph.modifier.event.handler
org.goplanit.gtfs - package org.goplanit.gtfs
org.goplanit.gtfs.enums - package org.goplanit.gtfs.enums
org.goplanit.gtfs.handler - package org.goplanit.gtfs.handler
org.goplanit.gtfs.model - package org.goplanit.gtfs.model
org.goplanit.gtfs.reader - package org.goplanit.gtfs.reader
org.goplanit.gtfs.scheme - package org.goplanit.gtfs.scheme
org.goplanit.gtfs.util - package org.goplanit.gtfs.util
org.goplanit.input - package org.goplanit.input: Top-level input classes and interfaces
org.goplanit.interactor - package org.goplanit.interactor: Interfaces which must be implemented by event accessor classes
org.goplanit.io.converter - package org.goplanit.io.converter
org.goplanit.io.converter.demands - package org.goplanit.io.converter.demands: Classes used to process the Java classes generated from XSD files
org.goplanit.io.converter.intermodal - package org.goplanit.io.converter.intermodal
org.goplanit.io.converter.network - package org.goplanit.io.converter.network
org.goplanit.io.converter.service - package org.goplanit.io.converter.service
org.goplanit.io.converter.zoning - package org.goplanit.io.converter.zoning
org.goplanit.io.geo - package org.goplanit.io.geo
org.goplanit.io.input - package org.goplanit.io.input: Classes to read files in PlanIt's XML format
org.goplanit.io.output.formatter - package org.goplanit.io.output.formatter: PLANit IO output formatter package
org.goplanit.io.project - package org.goplanit.io.project: Simple implementations of CustomPlanItProject
org.goplanit.io.xml.converter - package org.goplanit.io.xml.converter: PLANit IO XML conversion helper classes
org.goplanit.io.xml.network - package org.goplanit.io.xml.network: PLANit IO XML parsing for network
org.goplanit.io.xml.network.physical.macroscopic - package org.goplanit.io.xml.network.physical.macroscopic: PLANit IO XML parsing for macroscopic network
org.goplanit.io.xml.util - package org.goplanit.io.xml.util: Utility methods to help process XML data
org.goplanit.logging - package org.goplanit.logging: This package contains classes for managing logging in PlanIt projects.
org.goplanit.matsim.converter - package org.goplanit.matsim.converter
org.goplanit.matsim.util - package org.goplanit.matsim.util
org.goplanit.matsim.xml - package org.goplanit.matsim.xml
org.goplanit.mode - package org.goplanit.mode
org.goplanit.network - package org.goplanit.network
org.goplanit.network.layer - package org.goplanit.network.layer
org.goplanit.network.layer.macroscopic - package org.goplanit.network.layer.macroscopic: Macroscopic physical network component object classes
org.goplanit.network.layer.modifier - package org.goplanit.network.layer.modifier
org.goplanit.network.layer.physical - package org.goplanit.network.layer.physical: Physical network component object classes
org.goplanit.network.layer.service - package org.goplanit.network.layer.service
org.goplanit.network.layers - package org.goplanit.network.layers
org.goplanit.network.transport - package org.goplanit.network.transport: Integrated network component object classes
org.goplanit.network.virtual - package org.goplanit.network.virtual: Virtual network component object classes
org.goplanit.od.demand - package org.goplanit.od.demand: Contains the definitions of the Origin-Destination Demand classes
org.goplanit.od.path - package org.goplanit.od.path: This package holds the origin-destination path objects.
org.goplanit.od.skim - package org.goplanit.od.skim: This package holds the origin-destination Skim Matrix objects.
org.goplanit.osm.converter - package org.goplanit.osm.converter
org.goplanit.osm.converter.helper - package org.goplanit.osm.converter.helper
org.goplanit.osm.converter.intermodal - package org.goplanit.osm.converter.intermodal
org.goplanit.osm.converter.network - package org.goplanit.osm.converter.network
org.goplanit.osm.converter.zoning - package org.goplanit.osm.converter.zoning
org.goplanit.osm.converter.zoning.handler - package org.goplanit.osm.converter.zoning.handler
org.goplanit.osm.converter.zoning.handler.helper - package org.goplanit.osm.converter.zoning.handler.helper
org.goplanit.osm.defaults - package org.goplanit.osm.defaults
org.goplanit.osm.physical.network.macroscopic - package org.goplanit.osm.physical.network.macroscopic
org.goplanit.osm.tags - package org.goplanit.osm.tags
org.goplanit.osm.util - package org.goplanit.osm.util
org.goplanit.output - package org.goplanit.output: output writer related classes
org.goplanit.output.adapter - package org.goplanit.output.adapter: Output Adapter and Output Type Adapter classes and interfaces
org.goplanit.output.configuration - package org.goplanit.output.configuration: output configuration related classes
org.goplanit.output.enums - package org.goplanit.output.enums: Enumerations containing possible values of output properties
org.goplanit.output.formatter - package org.goplanit.output.formatter: output formatter related classes
org.goplanit.output.property - package org.goplanit.output.property: Output property objects which represent quantities which can be reported in the output
org.goplanit.path - package org.goplanit.path: PLANit path classes
org.goplanit.path.choice - package org.goplanit.path.choice: PLANit path choice classes
org.goplanit.path.choice.logit - package org.goplanit.path.choice.logit: PLANit logit based path choice classes
org.goplanit.project - package org.goplanit.project: PLANit project classes
org.goplanit.sdinteraction.smoothing - package org.goplanit.sdinteraction.smoothing: Classes which perform the smoothing used in the algorithm convergence
org.goplanit.service.routed - package org.goplanit.service.routed
org.goplanit.supply.fundamentaldiagram - package org.goplanit.supply.fundamentaldiagram: Fundamental diagram classes
org.goplanit.supply.network.nodemodel - package org.goplanit.supply.network.nodemodel: Node model classes
org.goplanit.supply.networkloading - package org.goplanit.supply.networkloading: Network loading classes
org.goplanit.time - package org.goplanit.time: Contains the definition of the TimePeriod object
org.goplanit.tntp - package org.goplanit.tntp: Top level package for reading input files which are in the TNTP Format
org.goplanit.tntp.converter.demands - package org.goplanit.tntp.converter.demands
org.goplanit.tntp.converter.network - package org.goplanit.tntp.converter.network
org.goplanit.tntp.converter.zoning - package org.goplanit.tntp.converter.zoning
org.goplanit.tntp.enums - package org.goplanit.tntp.enums: Enumerations used in the TNTP format input
org.goplanit.tntp.input - package org.goplanit.tntp.input: Scanner reader for reading input files which are in the TNTP Format
org.goplanit.tntp.output.formatter - package org.goplanit.tntp.output.formatter: CSV output formatter used for TNTP results output
org.goplanit.tntp.project - package org.goplanit.tntp.project: TNTP implementation of CustomPlanItProject
org.goplanit.userclass - package org.goplanit.userclass: Contains the definitions of the user classes (UserClass, TravellerType and Mode)
org.goplanit.utils.args - package org.goplanit.utils.args: Utils classes for parsing application arguments
org.goplanit.utils.arrays - package org.goplanit.utils.arrays: Util classes for array manipulation and/or management
org.goplanit.utils.box - package org.goplanit.utils.box
org.goplanit.utils.builder - package org.goplanit.utils.builder: Contains the definitions of the configurator classes
org.goplanit.utils.cumulatives - package org.goplanit.utils.cumulatives: Classes for cumulatives (in a traffic context)
org.goplanit.utils.epsg - package org.goplanit.utils.epsg
org.goplanit.utils.event - package org.goplanit.utils.event
org.goplanit.utils.exceptions - package org.goplanit.utils.exceptions: General wrappers for exceptions thrown during program execution
org.goplanit.utils.function - package org.goplanit.utils.function: Function utility classes
org.goplanit.utils.functionalinterface - package org.goplanit.utils.functionalinterface: Utilities for functional interfaces
org.goplanit.utils.geo - package org.goplanit.utils.geo
org.goplanit.utils.graph - package org.goplanit.utils.graph: Utilities for setting up graphs
org.goplanit.utils.graph.directed - package org.goplanit.utils.graph.directed
org.goplanit.utils.graph.modifier - package org.goplanit.utils.graph.modifier
org.goplanit.utils.graph.modifier.event - package org.goplanit.utils.graph.modifier.event
org.goplanit.utils.id - package org.goplanit.utils.id: Utilities for managing and generating unique ids within certain (managed) contexts
org.goplanit.utils.locale - package org.goplanit.utils.locale
org.goplanit.utils.macroscopic - package org.goplanit.utils.macroscopic
org.goplanit.utils.math - package org.goplanit.utils.math: Math oriented utility classes
org.goplanit.utils.misc - package org.goplanit.utils.misc: Miscellaneous utility classes
org.goplanit.utils.mode - package org.goplanit.utils.mode
org.goplanit.utils.network.layer - package org.goplanit.utils.network.layer
org.goplanit.utils.network.layer.macroscopic - package org.goplanit.utils.network.layer.macroscopic
org.goplanit.utils.network.layer.modifier - package org.goplanit.utils.network.layer.modifier
org.goplanit.utils.network.layer.physical - package org.goplanit.utils.network.layer.physical
org.goplanit.utils.network.layer.service - package org.goplanit.utils.network.layer.service
org.goplanit.utils.network.layers - package org.goplanit.utils.network.layers
org.goplanit.utils.network.virtual - package org.goplanit.utils.network.virtual: Virtual physical network oriented utility classes
org.goplanit.utils.od - package org.goplanit.utils.od: Top-level abstract interfaces to handle Origin-Destination Data
org.goplanit.utils.output - package org.goplanit.utils.output: Output oriented utility classes
org.goplanit.utils.path - package org.goplanit.utils.path
org.goplanit.utils.pcu - package org.goplanit.utils.pcu
org.goplanit.utils.predicate - package org.goplanit.utils.predicate
org.goplanit.utils.reflection - package org.goplanit.utils.reflection: Reflection oriented utility classes
org.goplanit.utils.resource - package org.goplanit.utils.resource
org.goplanit.utils.test - package org.goplanit.utils.test: Testing specific utility classes
org.goplanit.utils.time - package org.goplanit.utils.time
org.goplanit.utils.unit - package org.goplanit.utils.unit
org.goplanit.utils.wrapper - package org.goplanit.utils.wrapper
org.goplanit.utils.xml - package org.goplanit.utils.xml
org.goplanit.utils.zip - package org.goplanit.utils.zip
org.goplanit.utils.zoning - package org.goplanit.utils.zoning: zoning oriented utility classes
org.goplanit.utils.zoning.modifier - package org.goplanit.utils.zoning.modifier
org.goplanit.utils.zoning.modifier.event - package org.goplanit.utils.zoning.modifier.event
org.goplanit.zoning - package org.goplanit.zoning
org.goplanit.zoning.modifier - package org.goplanit.zoning.modifier
org.goplanit.zoning.modifier.event - package org.goplanit.zoning.modifier.event
org.goplanit.zoning.modifier.event.handler - package org.goplanit.zoning.modifier.event.handler
ORGANIZATION_NAME - org.goplanit.gtfs.enums.GtfsKeyType
ORIGID - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
origin - Variable in class org.goplanit.assignment.ltm.sltm.Bush: the origin of the bush
ORIGIN_ID - org.goplanit.gtfs.enums.GtfsKeyType
ORIGIN_ZONE_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
ORIGIN_ZONE_ID - org.goplanit.output.property.OutputPropertyType
ORIGIN_ZONE_XML_ID - org.goplanit.output.property.OutputPropertyType
original - Variable in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes.ModifiedLinkSegmentTypesModes
originalLinkInternalAvailableLocations - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Mapping from locations (representing known OSM nodes or auto-generated PLANit nodes without OSM node, in the latter case, no OSM node is stored in the pair) to the links they are internal to.
originDemandPcuH - Variable in class org.goplanit.assignment.ltm.sltm.Bush: the total demand of the bush
originId - Variable in class org.goplanit.utils.od.OdHashedIterator: Id of the origin zone
originId - Variable in class org.goplanit.utils.od.OdMatrixIterator: Id of the origin zone
OriginZoneExternalIdOutputProperty - Class in org.goplanit.output.property
OriginZoneExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.OriginZoneExternalIdOutputProperty
OriginZoneIdOutputProperty - Class in org.goplanit.output.property
OriginZoneIdOutputProperty() - Constructor for class org.goplanit.output.property.OriginZoneIdOutputProperty
OriginZoneXmlIdOutputProperty - Class in org.goplanit.output.property
OriginZoneXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.OriginZoneXmlIdOutputProperty
OSM_PBF_EXTENSION - Static variable in class org.goplanit.osm.util.Osm4JUtils: osm PBF extension string
OSM_XML_EXTENSION - Static variable in class org.goplanit.osm.util.Osm4JUtils: osm XML extension string
Osm4JUtils - Class in org.goplanit.osm.util: Utiilities regarding the use of the OSM4J reader that provides us with raw stream of OSM entities to parse
Osm4JUtils() - Constructor for class org.goplanit.osm.util.Osm4JUtils
OsmAccessTags - Class in org.goplanit.osm.tags: Access tags as described on https://wiki.openstreetmap.org/wiki/Key:access.
OsmAccessTags() - Constructor for class org.goplanit.osm.tags.OsmAccessTags
OsmBicycleTags - Class in org.goplanit.osm.tags: Commonly used tags in relation to bicycles or bicycle ways.
OsmBicycleTags() - Constructor for class org.goplanit.osm.tags.OsmBicycleTags
OsmBoundingAreaUtils - Class in org.goplanit.osm.util: Utilities regarding the use of a bounding box when parsing OSM data
OsmBoundingAreaUtils() - Constructor for class org.goplanit.osm.util.OsmBoundingAreaUtils
OsmBusWayTags - Class in org.goplanit.osm.tags: Commonly used tags in relation to busways Note that buses and/or public service vehicles have three different possible tagging schemes that are supported by open street maps, namely: busway scheme lanes:mode scheme mode:lanes scheme The tags and method in this class are focussed on the busways only
OsmBusWayTags() - Constructor for class org.goplanit.osm.tags.OsmBusWayTags
osmCircularWays - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderData: temporary storage of osmWays before extracting either a single node, or multiple links to reflect the roundabout/circular road
OsmConstants - Class in org.goplanit.osm.util: Some constants used by PLANit OSM
OsmConstants() - Constructor for class org.goplanit.osm.util.OsmConstants
OsmDirectionTags - Class in org.goplanit.osm.tags: Tags related to directions, e.g.
OsmDirectionTags() - Constructor for class org.goplanit.osm.tags.OsmDirectionTags
osmHighwaySettings - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: all settings specific to osm highway tags
OsmHighwaySettings - Class in org.goplanit.osm.converter.network: All highway specific settings
OsmHighwaySettings(OsmSpeedLimitDefaultsCategory, OsmSpeedLimitDefaultsCategory, OsmModeAccessDefaultsCategory) - Constructor for class org.goplanit.osm.converter.network.OsmHighwaySettings: Constructor
OsmHighwayTags - Class in org.goplanit.osm.tags: OSM "highway" values, e.g.
OsmHighwayTags() - Constructor for class org.goplanit.osm.tags.OsmHighwayTags
OsmHighwayTypeConfiguration - Class in org.goplanit.osm.defaults: Configuration options regarding the activation/deactivation of specific OSM highway types in the parser
OsmHighwayTypeConfiguration() - Constructor for class org.goplanit.osm.defaults.OsmHighwayTypeConfiguration: default constructor
OsmInfrastructureConfiguration - Class in org.goplanit.osm.defaults: Base class with common functionality for configuration OSM ways (highway/rail)
OsmInfrastructureConfiguration(String) - Constructor for class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Default constructor
OsmInfrastructureConfiguration(String, Set<String>, Set<String>) - Constructor for class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: Construct with defaults being populated
OsmIntermodalReader - Class in org.goplanit.osm.converter.intermodal: Parse OSM input in either *.osm or *.osm.pbf format and return PLANit intermodal network which includes the transfer zones of a zoning instance.
OsmIntermodalReader(String, PlanitOsmNetwork, Zoning) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: Constructor
OsmIntermodalReader(URL, String, PlanitOsmNetwork, Zoning) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: Constructor
OsmIntermodalReader(OsmIntermodalReaderSettings, Zoning) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: Constructor
OsmIntermodalReader(OsmNetworkReaderSettings, OsmPublicTransportReaderSettings, PlanitOsmNetwork, Zoning) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: Constructor
OsmIntermodalReaderFactory - Class in org.goplanit.osm.converter.intermodal: Factory for creating PLANitOsmIntermodalReaders
OsmIntermodalReaderFactory() - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderFactory
OsmIntermodalReaderSettings - Class in org.goplanit.osm.converter.intermodal: Capture all the user configurable settings regarding the OSM intermodal reader, which in turn has a network and zoning reader.
OsmIntermodalReaderSettings(String) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Constructor
OsmIntermodalReaderSettings(String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Constructor
OsmIntermodalReaderSettings(URL, String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Constructor
OsmIntermodalReaderSettings(OsmNetworkReaderSettings, OsmPublicTransportReaderSettings) - Constructor for class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Constructor
OsmJunctionTags - Class in org.goplanit.osm.tags: Tags related to junction values, e.g.
OsmJunctionTags() - Constructor for class org.goplanit.osm.tags.OsmJunctionTags
OsmLaneDefaults - Class in org.goplanit.osm.defaults: configure and retrieve the default configuration for the number of lanes for various osm way types (these are the total lanes on a link covering both directions.
OsmLaneDefaults() - Constructor for class org.goplanit.osm.defaults.OsmLaneDefaults: Constructor
OsmLaneDefaults(OsmLaneDefaults) - Constructor for class org.goplanit.osm.defaults.OsmLaneDefaults: Copy constructor
OsmLanesModeTaggingSchemeHelper - Class in org.goplanit.osm.converter.helper: The lanesMode tagging scheme is one of a number of tagging schemes used by OSM to identify dedicated lanes for specific modes.
OsmLanesModeTaggingSchemeHelper(Set<String>) - Constructor for class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: Constructor
OsmLaneTaggingSchemeHelper - Class in org.goplanit.osm.converter.helper: The tagging scheme helper is the base class for different lane based tagging schemes.
OsmLaneTaggingSchemeHelper(Set<String>) - Constructor for class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: Constructor
OsmLaneTags - Class in org.goplanit.osm.tags: tags related to lanes and some basic convenience methods to check for lane related OSM tags
OsmLaneTags() - Constructor for class org.goplanit.osm.tags.OsmLaneTags
OsmModeAccessDefaults - Class in org.goplanit.osm.defaults: Class representing the default mode access restrictions/allowance for modes for a given highway type.
OsmModeAccessDefaults() - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaults: Default constructor
OsmModeAccessDefaults(String) - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaults: Default constructor
OsmModeAccessDefaults(OsmModeAccessDefaults) - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaults: Copy constructor
OsmModeAccessDefaultsByCountry - Class in org.goplanit.osm.defaults: The defaults for the mode access in case no specific restrictions are indicated on the highway=type way.
OsmModeAccessDefaultsByCountry() - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry
OsmModeAccessDefaultsCategory - Class in org.goplanit.osm.defaults: Class representing the default mode access restrictions/allowance for modes for a given category of OSM ways, e.g.
OsmModeAccessDefaultsCategory() - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Default constructor
OsmModeAccessDefaultsCategory(String) - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Default constructor
OsmModeAccessDefaultsCategory(OsmModeAccessDefaultsCategory) - Constructor for class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Copy constructor
OsmModeHelper - Class in org.goplanit.osm.converter.helper: Class to support parsing and other functionality that depends on the configuration of the readers regarding OSM modes and their mappng to PLANit modes
OsmModeHelper(OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.helper.OsmModeHelper: Constructor
OsmModeLanesTaggingSchemeHelper - Class in org.goplanit.osm.converter.helper: The modeLanes tagging scheme is one of a number of tagging schemes used by OSM to identify dedicated lanes for specific modes.
OsmModeLanesTaggingSchemeHelper(Set<String>) - Constructor for class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: Constructor
OsmModeUtils - Class in org.goplanit.osm.util: Utilities in relation to parsing OSM modes when constructing a PLANit model from it.
OsmModeUtils() - Constructor for class org.goplanit.osm.util.OsmModeUtils
OsmMultiPolygonTags - Class in org.goplanit.osm.tags: tags used by Osm Multiplogyon relation
OsmMultiPolygonTags() - Constructor for class org.goplanit.osm.tags.OsmMultiPolygonTags
OsmNetworkHandler - Class in org.goplanit.osm.converter.network: Handler that handles, i.e., converts, nodes, ways, and relations.
OsmNetworkHandler(OsmNetworkReaderData, OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkHandler: Constructor
OsmNetworkHandlerHelper - Class in org.goplanit.osm.converter.network: Helper class for the OSM network handlers, providing static helper methods that reflect common code across various handlers that are not considered general enough to be part of a utility class.
OsmNetworkHandlerHelper() - Constructor for class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper
OsmNetworkHandlerProfiler - Class in org.goplanit.osm.converter.network: Track statistics on OSM network handler
OsmNetworkHandlerProfiler() - Constructor for class org.goplanit.osm.converter.network.OsmNetworkHandlerProfiler
OsmNetworkLayerModeParser - Class in org.goplanit.osm.converter.network: Class to support parsing of OSM modes on OSM ways given the configuration provided for each PLANit network layer
OsmNetworkLayerModeParser(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkLayerModeParser: Constructor
OsmNetworkLayerParser - Class in org.goplanit.osm.converter.network: Takes care of populating a PLANit layer based on the OSM way information that has been identified as relevant to this layer by the OsmNetworkHandler
OsmNetworkLayerParser(MacroscopicNetworkLayer, OsmNetworkReaderData, OsmNetworkReaderSettings, PlanitJtsCrsUtils) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkLayerParser: Constructor
OsmNetworkPreProcessingHandler - Class in org.goplanit.osm.converter.network: Preprocessing Handler that identifies which nodes of osm ways - that are marked for inclusion even if they fall (partially) outside the bounding polygon - are to be kept.
OsmNetworkPreProcessingHandler(OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkPreProcessingHandler: constructor
OsmNetworkReader - Class in org.goplanit.osm.converter.network: Parse OSM input in either *.osm or *.osm.pbf format and return PLANit network instance
OsmNetworkReader(String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReader: Constructor
OsmNetworkReader(URL, String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReader: Constructor
OsmNetworkReader(OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReader: Constructor
OsmNetworkReader(PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReader: Constructor
OsmNetworkReaderData - Class in org.goplanit.osm.converter.network: Data specifically required in the network reader while parsing OSM data
OsmNetworkReaderData() - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderData: Default Constructor
OsmNetworkReaderFactory - Class in org.goplanit.osm.converter.network: Factory for creating PLANitOSMReaders
OsmNetworkReaderFactory() - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderFactory
OsmNetworkReaderLayerData - Class in org.goplanit.osm.converter.network: Class containing data that maps Osm entities to PLANit entities required during parsing for a specific network layer
OsmNetworkReaderLayerData() - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData
OsmNetworkReaderSettings - Class in org.goplanit.osm.converter.network: All general settings (and sub-settings classes) for the OSM reader pertaining to parsing network infrastructure.
OsmNetworkReaderSettings(String) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Constructor with country to base (i) default speed limits and (ii) mode access on, for various osm highway types in case maximum speed limit information is missing
OsmNetworkReaderSettings(String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Constructor with country to base (i) default speed limits and (ii) mode access on, for various OSM highway types in case maximum speed limit information is missing
OsmNetworkReaderSettings(URL, String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Constructor with country to base (i) default speed limits and (ii) mode access on, for various OSM highway types in case maximum speed limit information is missing
OsmNetworkReaderSettings(PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Default constructor.
OsmNetworkToZoningReaderData - Class in org.goplanit.osm.converter.network: Class that hosts all the data gathered (e.g., references, mappings, etc.) during the parsing of the OSM network that is also of use to the OSM zoning reader.
OsmNetworkToZoningReaderData(OsmNetworkReaderData, OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: Constructor
osmNodes - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderData: temporary storage of osmNodes before converting the useful ones to actual nodes
OsmNodeUtils - Class in org.goplanit.osm.util: Utilities in relation to parsing OSM nodes while constructing a PLANit model from it
OsmNodeUtils() - Constructor for class org.goplanit.osm.util.OsmNodeUtils
OsmOneWayTags - Class in org.goplanit.osm.tags: common OSM one way tags and some helper methods
OsmOneWayTags() - Constructor for class org.goplanit.osm.tags.OsmOneWayTags
osmPedestrianKeyTags - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: set of available pedestrian key tags foot pedestrian footway sidewalk
OsmPedestrianTags - Class in org.goplanit.osm.tags: pedestrian related tags which are not really grouped in a logical way in OSM, hence we provide all of them here as well as some convenience methods to quickly collect some of the most relevant ones.
OsmPedestrianTags() - Constructor for class org.goplanit.osm.tags.OsmPedestrianTags
OsmPtv1Tags - Class in org.goplanit.osm.tags: Tags related specifically to public transport infrastructure and services for the OSM PTv1 tagging scheme.
OsmPtv1Tags() - Constructor for class org.goplanit.osm.tags.OsmPtv1Tags
OsmPtv2Tags - Class in org.goplanit.osm.tags: Tags related specifically to public transport infrastructure and services for the OSM PTv2 tagging scheme.
OsmPtv2Tags() - Constructor for class org.goplanit.osm.tags.OsmPtv2Tags
OsmPtVersionScheme - Enum in org.goplanit.osm.util: Enum highlighting the different (supported) public transport tagging schemes
OsmPtVersionSchemeUtils - Class in org.goplanit.osm.util: Utilities regarding the tagging of OSM entities and the various PT version schemes that exist
OsmPtVersionSchemeUtils() - Constructor for class org.goplanit.osm.util.OsmPtVersionSchemeUtils
OsmPublicTransportModeHelper - Class in org.goplanit.osm.converter.zoning.handler.helper: class that provides functionality to parse/filter public transport modes from OSM entities based on the user defined settings
OsmPublicTransportModeHelper(OsmNetworkReaderSettings) - Constructor for class org.goplanit.osm.converter.zoning.handler.helper.OsmPublicTransportModeHelper: Constructor
OsmPublicTransportReaderSettings - Class in org.goplanit.osm.converter.zoning: Capture all the user configurable settings regarding how to parse (if at all) (public transport) transfer infrastructure such as stations, poles, platforms, and other stop and tranfer related infrastructure
OsmPublicTransportReaderSettings() - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor using default (Global) locale
OsmPublicTransportReaderSettings(String) - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor with user defined source locale
OsmPublicTransportReaderSettings(String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor with user defined source locale
OsmPublicTransportReaderSettings(URL, String) - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor with user defined source locale
OsmPublicTransportReaderSettings(URL, String, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor with user defined source locale
OsmPublicTransportReaderSettings(URL, String, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Constructor for class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Constructor with user defined source locale
OsmRailFeatureTags - Class in org.goplanit.osm.tags: OSM rail feature tags that could be of value for a network.
OsmRailFeatureTags() - Constructor for class org.goplanit.osm.tags.OsmRailFeatureTags
OsmRailModeTags - Class in org.goplanit.osm.tags: Most OSM rail based mode tags.
OsmRailModeTags() - Constructor for class org.goplanit.osm.tags.OsmRailModeTags
osmRailwaySettings - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: all settings specific to osm railway tags
OsmRailwaySettings - Class in org.goplanit.osm.converter.network: Settings specific to railways when parsing OSM files and converting them to a PLANit memory model
OsmRailwaySettings(OsmSpeedLimitDefaultsCategory, OsmModeAccessDefaultsCategory) - Constructor for class org.goplanit.osm.converter.network.OsmRailwaySettings: Constructor
OsmRailwayTags - Class in org.goplanit.osm.tags: Most OSM rail way tags that could be of value for a network.
OsmRailwayTags() - Constructor for class org.goplanit.osm.tags.OsmRailwayTags
OsmRailwayTypeConfiguration - Class in org.goplanit.osm.defaults
OsmRailwayTypeConfiguration() - Constructor for class org.goplanit.osm.defaults.OsmRailwayTypeConfiguration: Default constructor
OsmReaderSettings - Class in org.goplanit.osm.converter: Settings relevant for a Planit Xml reader
OsmReaderSettings() - Constructor for class org.goplanit.osm.converter.OsmReaderSettings: Default constructor with default locale (Global)
OsmReaderSettings(String) - Constructor for class org.goplanit.osm.converter.OsmReaderSettings: Constructor
OsmReaderSettings(URL, String) - Constructor for class org.goplanit.osm.converter.OsmReaderSettings: Constructor
OsmRelationTypeTags - Class in org.goplanit.osm.tags: Relation types that exist
OsmRelationTypeTags() - Constructor for class org.goplanit.osm.tags.OsmRelationTypeTags
OsmRelationUtils - Class in org.goplanit.osm.util: Utilities in relation to parsing OSM relations while constructing a PLANit model from it
OsmRelationUtils() - Constructor for class org.goplanit.osm.util.OsmRelationUtils
OsmRoadModeCategoryTags - Class in org.goplanit.osm.tags
OsmRoadModeCategoryTags() - Constructor for class org.goplanit.osm.tags.OsmRoadModeCategoryTags
OsmRoadModeTags - Class in org.goplanit.osm.tags: Most OSM road based mode tags.
OsmRoadModeTags() - Constructor for class org.goplanit.osm.tags.OsmRoadModeTags
OsmSpeedLimitDefaults - Class in org.goplanit.osm.defaults: A class containing instances for each of the OSM speed limit default categories: urban/non-urban highways and railways
OsmSpeedLimitDefaults(String) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: constructor
OsmSpeedLimitDefaults(String, OsmSpeedLimitDefaults) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: constructor
OsmSpeedLimitDefaults(String, OsmSpeedLimitDefaultsCategory, OsmSpeedLimitDefaultsCategory, OsmSpeedLimitDefaultsCategory) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: Constructor
OsmSpeedLimitDefaults(OsmSpeedLimitDefaults) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: Copy constructor
OsmSpeedLimitDefaultsByCountry - Class in org.goplanit.osm.defaults: Convenience class for quickly collecting the speed limits for various countries, where possible based on https://wiki.openstreetmap.org/wiki/OSM_tags_for_routing/Maxspeed (highway types)
OsmSpeedLimitDefaultsByCountry() - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry
OsmSpeedLimitDefaultsCategory - Class in org.goplanit.osm.defaults: Container class for storing speed limits for different waytypes for OSM.
OsmSpeedLimitDefaultsCategory(String) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: Constructor.
OsmSpeedLimitDefaultsCategory(String, OsmSpeedLimitDefaultsCategory) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: Constructor.
OsmSpeedLimitDefaultsCategory(OsmSpeedLimitDefaultsCategory) - Constructor for class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: Copy constructor
OsmSpeedTags - Class in org.goplanit.osm.tags: common speed limit information tags
OsmSpeedTags() - Constructor for class org.goplanit.osm.tags.OsmSpeedTags
OsmTags - Class in org.goplanit.osm.tags: common OSM tags that we might need to refer to
OsmTags() - Constructor for class org.goplanit.osm.tags.OsmTags
OsmTagUtils - Class in org.goplanit.osm.util: Class with some general convenience methods for dealing with OSM tags
OsmTagUtils() - Constructor for class org.goplanit.osm.util.OsmTagUtils
OsmWaterModeTags - Class in org.goplanit.osm.tags: Most OSM water based mode tags.
OsmWaterModeTags() - Constructor for class org.goplanit.osm.tags.OsmWaterModeTags
osmWayKey - Variable in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: way key this configuration applies to
OsmWaySettings - Class in org.goplanit.osm.converter.network: Base class with shared settings across different types of Osm ways (highway, railway)
OsmWaySettings(OsmInfrastructureConfiguration, OsmSpeedLimitDefaultsCategory, OsmModeAccessDefaultsCategory) - Constructor for class org.goplanit.osm.converter.network.OsmWaySettings: Constructor
osmWaysWithMultiplePlanitLinks - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: track osmways with multiple planit links if they are created due to circular ways or breaking of links.
OsmWayUtils - Class in org.goplanit.osm.util: Utilities in relation to parsing osm ways and constructing a PLANit model from it
OsmWayUtils() - Constructor for class org.goplanit.osm.util.OsmWayUtils
OsmZoningHandlerBase - Class in org.goplanit.osm.converter.zoning.handler: Base Handler for all zoning handlers.
OsmZoningHandlerBase(OsmPublicTransportReaderSettings, OsmZoningReaderData, Zoning, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: constructor
OsmZoningHandlerProfiler - Class in org.goplanit.osm.converter.zoning.handler: Track statistics on Osm zoning handler
OsmZoningHandlerProfiler() - Constructor for class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: Default constructor
OsmZoningPostProcessingHandler - Class in org.goplanit.osm.converter.zoning.handler: Handler that conducts final parsing round where all stop_positions in relations are mapped to the now parsed transfer zones.
OsmZoningPostProcessingHandler(OsmPublicTransportReaderSettings, OsmZoningReaderData, Zoning, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.OsmZoningPostProcessingHandler: Constructor
OsmZoningPreProcessingHandler - Class in org.goplanit.osm.converter.zoning.handler: Handler that is applied before we conduct the actual handling of the zones by exploring the OSM relations in the file and highlighting a subset of ways that we are supposed to retain even though they are not tagged by themselves in a way that warrants keeping them.
OsmZoningPreProcessingHandler(OsmPublicTransportReaderSettings, OsmZoningReaderData, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.OsmZoningPreProcessingHandler: Constructor
OsmZoningProcessingHandler - Class in org.goplanit.osm.converter.zoning.handler: Handler that handles, i.e., converts, nodes, ways, and relations to the relevant transfer zones.
OsmZoningProcessingHandler(OsmPublicTransportReaderSettings, OsmZoningReaderData, Zoning, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: Constructor
OsmZoningReader - Class in org.goplanit.osm.converter.zoning: Parse OSM input in either *.osm or *.osm.pbf format and return PLANit zoning instance comprising of the identified transfer zones.
OsmZoningReader(URL, String, Zoning) - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReader: Constructor.
OsmZoningReader(URL, String, Zoning, PlanitOsmNetwork) - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReader: Constructor.
OsmZoningReader(URL, String, Zoning, PlanitOsmNetwork, OsmNetworkToZoningReaderData) - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReader: Constructor
OsmZoningReader(OsmPublicTransportReaderSettings, Zoning) - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReader: Constructor.
OsmZoningReaderData - Class in org.goplanit.osm.converter.zoning: Data specifically required in the zoning reader while parsing OSM data
OsmZoningReaderData() - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReaderData: Default constructor using country set to GLOBAL (right hand drive)
OsmZoningReaderData(String) - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReaderData: Constructor
OsmZoningReaderFactory - Class in org.goplanit.osm.converter.zoning: Factory for creating PLANitOSM zoning Readers.
OsmZoningReaderFactory() - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReaderFactory
OsmZoningReaderOsmData - Class in org.goplanit.osm.converter.zoning: Data specifically required in the zoning reader while parsing OSM data
OsmZoningReaderOsmData() - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData
OsmZoningReaderPlanitData - Class in org.goplanit.osm.converter.zoning: Data specifically required in the zoning reader while parsing OSM data
OsmZoningReaderPlanitData() - Constructor for class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData
OTPTIONAL - org.goplanit.gtfs.enums.GtfsFileTypePresence
OUTER_ROLE - Static variable in class org.goplanit.osm.tags.OsmMultiPolygonTags
OUTFLOW - org.goplanit.output.property.OutputPropertyType
OutflowOutputProperty - Class in org.goplanit.output.property: Property to provide the Outflow rate in PCU/hour.
OutflowOutputProperty() - Constructor for class org.goplanit.output.property.OutflowOutputProperty
outgoingLinkSegmentReceivingFlows - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: store the receiving flows of each outgoing link segment at capacity, i.e., R_b=C_b
outgoingLinkSegmentReceivingFlows - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: store the available receiving flows of each outgoing link segment
outgoingLinkSegments - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: mapping of outgoing link index to link segment (if any), i.e.e, b=1,...|B^out|-1
OutputAdapter - Class in org.goplanit.output.adapter: Output Adapter which stores output type adapters for each Output Manager and defines top-level method which apply to all output types
OutputAdapter(TrafficAssignment) - Constructor for class org.goplanit.output.adapter.OutputAdapter: Constructor
OutputConfiguration - Class in org.goplanit.output.configuration: Class containing the general output configuration and the type specific configurations for some traffic assignment
OutputConfiguration() - Constructor for class org.goplanit.output.configuration.OutputConfiguration: Base constructor
outputDirectory - Variable in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: the output directory on where to persist the MATSIM file(s)
outputFileName - Variable in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: the output file name of the to be persisted the MATSIM file
OutputFormatter - Interface in org.goplanit.output.formatter: Interface for persisting output data in a particular format
OutputFormatterFactory - Class in org.goplanit.output.formatter: Factory to create output writers of any compatible type
OutputFormatterFactory() - Constructor for class org.goplanit.output.formatter.OutputFormatterFactory
outputFormatters - Variable in class org.goplanit.project.CustomPlanItProject: The output formatter(s) registered on this project
outputKeyProperties - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Map of OutputProperties of keys for each OutputType
OutputManager - Class in org.goplanit.output: Base class for output writers containing basic functionality regarding all things output
OutputManager() - Constructor for class org.goplanit.output.OutputManager: Base constructor of Output writer
outputProperties - Variable in class org.goplanit.output.configuration.OutputTypeConfiguration: Output properties to be included in the CSV output files
OutputProperty - Class in org.goplanit.output.property: Template for output property classes which can be included in the output files.
OutputProperty() - Constructor for class org.goplanit.output.property.OutputProperty
OutputPropertyPriority - Enum in org.goplanit.output.property: Enumeration giving the priority of output properties.
OutputPropertyType - Enum in org.goplanit.output.property: Enumeration of possible output properties
outputTimeUnit - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Time unit to be used in outputs
outputType - Variable in class org.goplanit.output.adapter.OutputTypeAdapterImpl: The OutputType this OutputTypeAdapter is used for
outputType - Variable in class org.goplanit.output.configuration.OutputTypeConfiguration: The output type being used with the current instance - this must be set in each concrete class which extends OutputTypeConfiguration
OutputType - Enum in org.goplanit.output.enums: Different configurations exist for different types of output which we identify via this enum GENERAL: LINK: link based output SIMULATION: simulation based output such as profile information, objects created etc.
OutputTypeAdapter - Interface in org.goplanit.output.adapter: Top-level interface for all output type adapters
OutputTypeAdapterImpl - Class in org.goplanit.output.adapter: Top-level abstract class which defines the common methods required by all output type adapters
OutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.OutputTypeAdapterImpl: Constructor
OutputTypeConfiguration - Class in org.goplanit.output.configuration: Configuration for a specific output type including the adapter allowing access to the underlying raw data
OutputTypeConfiguration(OutputType) - Constructor for class org.goplanit.output.configuration.OutputTypeConfiguration: OutputTypeconfiguration constructor
outputTypeConfigurations - Variable in class org.goplanit.output.configuration.OutputConfiguration: output configurations per output type
OutputTypeEnum - Interface in org.goplanit.output.enums: Marker interface to allow us to store outputType and suboutputTypeEnums in the same collection without issue while still being able to distinguish between the two
outputTypeKeysLocked - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Map to store which output types are already in use as keys
outputTypes - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: List of registered OutputTypes
outputTypeValuesLocked - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Map to store whether any data values have been stored for a given output type.
OutputUtils - Class in org.goplanit.utils.output: Utility Functions used during output
OutputUtils() - Constructor for class org.goplanit.utils.output.OutputUtils
outputValueProperties - Variable in class org.goplanit.output.formatter.BaseOutputFormatter: Map of OutputProperties for values for each OutputType
overrideOutputPropertyUnits(OutputPropertyType, Unit) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Indicate a certain output property is to use a different unit for its result than the default (if permitted)
overwriteByOsmHighwayType - Variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: track overwrite values for OSM highway types where we want different defaults for capacity and max density
overwriteCapacityMaxDensityDefaults(String, Number, Number) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Choose to overwrite the given highway type defaults with the given values
overwriteCapacityMaxDensityDefaults(String, Number, Number) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Choose to overwrite the given railway type defaults with the given values
overwriteModeAccessByOsmWayId(Number, String...) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: set the mode access for the given osm way id
overwriteModeAccessByOsmWayId(Number, List<String>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: set the mode access for the given osm way id
overwriteOsmWayModeAccess - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: track overwritten mode access values for specific osm ways by osm id.
overwriteOsmWayTypeCapacityDensityDefaults - Variable in class org.goplanit.osm.converter.network.OsmWaySettings: track overwrite values for OSM way types where we want different defaults for capacity and max density
overwriteOsmWayTypeDefaultCapacityMaxDensity(String, String, double, double) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Choose to overwrite the given highway type defaults with the given values
overwritePredefinedModeMapping(PredefinedModeType, String) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Overwrite a mapping from a predefined PLANit mode to a particular MATSim mode
overwriteStopLocationWaitingArea(Number, EntityType, Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide explicit mapping for stop_locations (by osm node id) to the waiting area, e.g., platform, pole, station, halt, stop, etc.
overwriteWaitingAreaNominatedOsmWayForStopLocation(Number, EntityType, Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Provide explicit mapping for waiting areas (platform, bus_stop, pole, station) to a nominated osm way (by osm id).

P

Pair<A,B> - Class in org.goplanit.utils.misc: Custom pair class similar to C++.
Pair(A, B) - Constructor for class org.goplanit.utils.misc.Pair: Constructor
pairSecondComparator - Static variable in class org.goplanit.algorithms.shortestpath.AStarShortestPathAlgorithm: Comparator to sort based on the second elements minimum value (ascending order)
pairSecondComparator - Static variable in class org.goplanit.algorithms.shortestpath.DijkstraShortestPathAlgorithm: Comparator to sort based on the second elements minimum value (ascending order)
PAPUA_NEW_GUINEA - Static variable in class org.goplanit.utils.locale.CountryNames
parametersPerLinkSegmentAndMode - Variable in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Map to store default alpha and beta values for a specific link segment
PARENT_STATION - org.goplanit.gtfs.enums.GtfsKeyType
parentNetwork - Variable in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderSettings: the parent service network used
parentNetwork - Variable in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderSettings: the parent network used
parentNetworkLayer - Variable in class org.goplanit.network.layer.ServiceNetworkLayerImpl: the parent layer
parseFromHeader(String, String) - Static method in class org.goplanit.tntp.TntpHeaderConstants: Parse a value from one of the headers in the network file
parseLength(XMLElementLinks.Link, LineString, PlanitJtsCrsUtils) - Static method in class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper: parse the length of an XML Link based on geometry or length attribute
parseLengthElementFromLink(XMLElementLinks.Link) - Static method in class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper: Get the link length from the length element in the XML file, if this has been set
parseLengthFromLineString(XMLElementLinks.Link, PlanitJtsCrsUtils) - Static method in class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper: Get the link length from the gml:LineString element in the XML file, if this has been set
parseLinkAndLinkSegments(XMLElementInfrastructureLayer, MacroscopicNetworkLayer, PlanitJtsCrsUtils) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: parse link and link segments
parseLinkGeometry(XMLElementLinks.Link) - Static method in class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper: parse the geometry from the xml link
parseLinkSegmentTypeAccessProperties(XMLElementAccessGroup, MacroscopicLinkSegmentType, Collection<Mode>) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: parse the mode properties for given link segment type and populate the helper with them
parseLinkSegmentTypes(XMLElementLayerConfiguration, MacroscopicNetworkLayer) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: Parse the link segment types
parseMaxSpeedValueKmPerHour(String) - Static method in class org.goplanit.osm.util.PlanitOsmUtils: parse an OSM maxSpeedValue tag value and perform unit conversion to km/h if needed
parseMaxSpeedValueLanesKmPerHour(String) - Static method in class org.goplanit.osm.util.PlanitOsmUtils: parse an OSM maxSpeedValue tag value with speeds per lane separated by "|" and perform unit conversion to km/h if needed
parseNodes(XMLElementInfrastructureLayer, MacroscopicNetworkLayer) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: Create and register nodes on the network
parseOsmWayGeometry - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: option to track the geometry of an OSM way, i.e., extract the line string for link segments from the nodes (default is false).
Pas - Class in org.goplanit.assignment.ltm.sltm: Paired Alternative Segment (PAS) implementation comprising two subpaths (segments), one of a higher cost than the other.
PasManager - Class in org.goplanit.assignment.ltm.sltm: Container class for tracking all unique PASs indexed by their last (merge) vertex
PasManager() - Constructor for class org.goplanit.assignment.ltm.sltm.PasManager: Constructor
PATH - org.goplanit.output.enums.OutputType
PATH - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
PATH_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
PATH_ID - org.goplanit.output.property.OutputPropertyType
PATH_ID_CLASS - Static variable in interface org.goplanit.utils.path.DirectedPath: class to use for id generation
PATH_STRING - org.goplanit.output.property.OutputPropertyType
PathChoice - Class in org.goplanit.path.choice: The path choice traffic assignment component responsible for the configuration of the path choice methodology and the path associated with this procedure.
PathChoice(PathChoice) - Constructor for class org.goplanit.path.choice.PathChoice: Copy constructor
PathChoice(IdGroupingToken) - Constructor for class org.goplanit.path.choice.PathChoice: Constructor
PathChoiceBuilder<T extends PathChoice> - Class in org.goplanit.path.choice: All path choice instances are built using this or a derived version of this builder
PathChoiceBuilder(Class<T>, IdGroupingToken, InputBuilderListener) - Constructor for class org.goplanit.path.choice.PathChoiceBuilder: Constructor
PathChoiceBuilderFactory - Class in org.goplanit.path.choice: Path choice builder factory for the path choice types supported directory by PLANit
PathChoiceBuilderFactory() - Constructor for class org.goplanit.path.choice.PathChoiceBuilderFactory
PathChoiceConfigurator<T extends PathChoice> - Class in org.goplanit.path.choice: Base class for all path choice configurator implementations
PathChoiceConfigurator(Class<T>) - Constructor for class org.goplanit.path.choice.PathChoiceConfigurator: Constructor
PathChoiceConfiguratorFactory - Class in org.goplanit.path.choice: factory for the path choice types supported directory by PLANit
PathChoiceConfiguratorFactory() - Constructor for class org.goplanit.path.choice.PathChoiceConfiguratorFactory
PathFlowUpdateConsumer<T extends NetworkFlowUpdateData> - Class in org.goplanit.assignment.ltm.sltm.consumer: Base Consumer to apply during path based flow update for each combination of origin, destination, and demand
PathFlowUpdateConsumer(T, OdPaths) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.PathFlowUpdateConsumer: Constructor
PathIdOutputProperty - Class in org.goplanit.output.property
PathIdOutputProperty() - Constructor for class org.goplanit.output.property.PathIdOutputProperty
PathLinkSendingFlowUpdateConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: Consumer to apply during path based loading to update the inflows on the provided raw array by their link segment ids for each combination of origin, destination, and demand
PathLinkSendingFlowUpdateConsumer(NetworkFlowUpdateData, OdPaths) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.PathLinkSendingFlowUpdateConsumer: Constructor
PathOutputIdentificationType - Enum in org.goplanit.output.enums: Enumeration of possible Id types used to identify a Path
PathOutputStringProperty - Class in org.goplanit.output.property
PathOutputStringProperty() - Constructor for class org.goplanit.output.property.PathOutputStringProperty
PathOutputTypeAdapter - Interface in org.goplanit.output.adapter: Output type adapter interface for paths
PathOutputTypeAdapterImpl - Class in org.goplanit.output.adapter: Top-level abstract class which defines the common methods required by Path output type adapters
PathOutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.PathOutputTypeAdapterImpl: Constructor
PathOutputTypeConfiguration - Class in org.goplanit.output.configuration: The configuration for the OD path output type.
PathOutputTypeConfiguration() - Constructor for class org.goplanit.output.configuration.PathOutputTypeConfiguration: Constructor Define the default output properties here.
PathTurnFlowUpdateConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: Consumer to apply during path based turn flow update for each combination of origin, destination, and demand
PathTurnFlowUpdateConsumer(NetworkTurnFlowUpdateData, OdPaths) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.PathTurnFlowUpdateConsumer: Constructor, where sending flows are not to be updated, only turn flows
PathUtils - Class in org.goplanit.utils.path: Path utilities
PathUtils() - Constructor for class org.goplanit.utils.path.PathUtils
PATHWAY - org.goplanit.gtfs.enums.GtfsObjectType
PATHWAY_ID - org.goplanit.gtfs.enums.GtfsKeyType
PATHWAY_MODE - org.goplanit.gtfs.enums.GtfsKeyType
PATHWAYS - org.goplanit.gtfs.enums.GtfsFileType
PAYMENT_METHOD - org.goplanit.gtfs.enums.GtfsKeyType
PCU - org.goplanit.utils.unit.UnitType
PCU - Static variable in interface org.goplanit.utils.unit.Unit: predefined PCU VehiclesUnit
PCU_HOUR - Static variable in interface org.goplanit.utils.unit.Unit: predefined PCU/HOUR Unit
PCU_KM - Static variable in interface org.goplanit.utils.unit.Unit: predefined PCU/KM Unit
PcuCapacitated - Interface in org.goplanit.utils.pcu: Interface that signifies implementing classes adopt some form of capacitated restriction based on PCUs (passenger car units), these can be links, link segments, or other entities that are otherwise not necessarily related in terms of their class hierarchy, but do support this capacitated feature.
PEDESTRIAN - org.goplanit.utils.mode.PredefinedModeType
PEDESTRIAN - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
PEDESTRIAN - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: should not be used, but some legacy tags exist, so should be parseable, see https://wiki.openstreetmap.org/wiki/Key:foot
PEDESTRIAN_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
PEDESTRIAN_LOCATION_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags
PEDESTRIAN_NEGATIVE_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags
PEDESTRIAN_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.PedestrianMode
PEDESTRIAN_POSITIVE_AND_LOCATION_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags
PEDESTRIAN_POSITIVE_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags
PEDESTRIAN_USABLITY_FEATURES - Static variable in class org.goplanit.mode.PedestrianMode
PedestrianMode - Class in org.goplanit.mode: the predefined pedestrian mode name: pedestrian maxspeed (km/h): 5 pcu: 0.1 vehicular type: NO_VEHICLE motorisation: NON_MOTORISED track: ROAD use: PRIVATE
PedestrianMode(IdGroupingToken) - Constructor for class org.goplanit.mode.PedestrianMode: Constructor for pedestrian mode
per(SimpleUnit...) - Method in class org.goplanit.utils.unit.GroupUnit: Factory method to create a new groupUnit with this unit's numerator and additionally added denominator units, e.g., KM per Hour
performIteration(Mode, double[], int) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Perform a single iteration where we perform a loading and then an equilibration step resulting in updated costs
performIteration(Mode, double[], int) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: Perform an iteration by: 1.
performIteration(Mode, double[], int) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: Perform a single iteration where we perform a loading and then an equilibration step resulting in updated costs
PERMISSIVE - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: permissive tag
PERMLANES - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
persist(Object, Class<?>, String) - Method in class org.goplanit.io.converter.PlanitWriterImpl: Persist the populated XML memory model to disk using JAXb
persist(TimePeriod, Set<Mode>, OutputConfiguration, OutputTypeConfiguration, OutputAdapter) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write data to output file
persist(TimePeriod, Set<Mode>, OutputConfiguration, OutputTypeConfiguration, OutputAdapter) - Method in interface org.goplanit.output.formatter.OutputFormatter: Persist the output data based on the passed in configuration and adapter (contained in the configuration)
PERSIST_ONLY_FINAL_ITERATION - Static variable in class org.goplanit.output.configuration.OutputConfiguration: Default for persisting final iteration
PERSIST_ZERO_FLOW - Static variable in class org.goplanit.output.configuration.OutputConfiguration: Default for persisting zero flows
persistOnlyFinalIteration - Variable in class org.goplanit.output.configuration.OutputConfiguration: persisting final iteration only or not
persistOutputData(TimePeriod, Set<Mode>, boolean) - Method in class org.goplanit.output.OutputManager: Persist the output data for all registered output types
persistZeroFlow - Variable in class org.goplanit.output.configuration.OutputConfiguration: persisting zero flows or not
PHYSICAL_QUEUE_BASIC - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
PHYSICAL_QUEUE_EXT_A - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
PHYSICAL_QUEUE_EXT_B - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
PHYSICAL_QUEUE_EXT_C - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
PhysicalCost - Interface in org.goplanit.cost.physical: Interface to classify costs of physical links Physical links can be either InitialPhysicalCosts (which are read in at the start and are constant) or PhysicalCosts (which are derived from other inputs and are recalculated after each iteration).
PhysicalCostConfigurator<T extends AbstractPhysicalCost> - Class in org.goplanit.cost.physical: Base class for all physical cost configurator implementations
PhysicalCostConfigurator(Class<T>) - Constructor for class org.goplanit.cost.physical.PhysicalCostConfigurator: Constructor
PhysicalCostConfiguratorFactory - Class in org.goplanit.cost.physical: Traffic assignment builder factory for the physical cost types supported directory by PLANit
PhysicalCostConfiguratorFactory() - Constructor for class org.goplanit.cost.physical.PhysicalCostConfiguratorFactory
PhysicalLayer - Interface in org.goplanit.utils.network.layer.physical: Physical topological Network consisting of nodes, links and link segments
PhysicalLinkOutputTypeAdapterImpl - Class in org.goplanit.output.adapter: Abstract class which defines the common methods required by Link output type adapters that specifically pertain to networks that have adopted physical layers for their network representation
PhysicalLinkOutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.PhysicalLinkOutputTypeAdapterImpl: Constructor
PhysicalModeFeatures - Interface in org.goplanit.utils.mode: the physical features of a mode are listed by this class.
PhysicalModeFeaturesImpl - Class in org.goplanit.mode: the physical features of a mode are listed by this class.
PhysicalModeFeaturesImpl() - Constructor for class org.goplanit.mode.PhysicalModeFeaturesImpl: Default constructor
PhysicalModeFeaturesImpl(VehicularModeType, MotorisationModeType, TrackModeType) - Constructor for class org.goplanit.mode.PhysicalModeFeaturesImpl
physicalNetworks - Variable in class org.goplanit.project.CustomPlanItProject: The registered physical networks
physicalNetworks - Variable in class org.goplanit.project.PlanItProjectInput: The registered physical networks
physicalSpeedLinkKmh - Variable in class org.goplanit.network.layer.physical.LinkSegmentImpl: physical maximum speed on the link segment in km/h
PICKUP_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
PiecewiseLinearCumulativeCurve - Class in org.goplanit.utils.cumulatives: Represents a piecewise linear cumulative curve
PiecewiseLinearCumulativeCurve() - Constructor for class org.goplanit.utils.cumulatives.PiecewiseLinearCumulativeCurve: Constructor
PITCAIRN_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
PLANIT_OUTPUT_FORMATTER - Static variable in interface org.goplanit.output.formatter.OutputFormatter: Default output formatter supported by PLANit from PLANitIO repository
planit2MatsimModeMapping - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: provides the mapping from PLANit modes ((predefined) mode name) to MATSIM mode (string)
PlanitComponent<T extends PlanitComponent<T> & Serializable> - Class in org.goplanit.component: PLANit components are the main building blocks to create PLANit applications with.
PlanitComponent(PlanitComponent<T>) - Constructor for class org.goplanit.component.PlanitComponent: Copy constructor
PlanitComponent(IdGroupingToken, Class<?>) - Constructor for class org.goplanit.component.PlanitComponent: Constructor
PlanitComponentBuilder<T> - Class in org.goplanit.component: Builder class to build something of type T which is a PLANit component.
PlanitComponentBuilder(Class<T>, IdGroupingToken, InputBuilderListener) - Constructor for class org.goplanit.component.PlanitComponentBuilder: Constructor
PlanitComponentEvent - Interface in org.goplanit.component.event: Interface for the group of events that are used around PLANit component (creation)
PlanitComponentEventType - Class in org.goplanit.component.event: PLANit component event type class.
PlanitComponentEventType(String) - Constructor for class org.goplanit.component.event.PlanitComponentEventType: Constructor
planitComponentFactories - Variable in class org.goplanit.project.PlanItProjectInput: available traffic assignment component factories by their derived class implementation
PlanitComponentFactory<T extends PlanitComponent<?>> - Class in org.goplanit.component: Generic factory class for registered subclasses of predefined PLANit components, so it does not create instances of T but of subclasses of T.
PlanitComponentFactory(Class<U>) - Constructor for class org.goplanit.component.PlanitComponentFactory: Constructor.
PlanitComponentFactory(String) - Constructor for class org.goplanit.component.PlanitComponentFactory: Constructor.
PlanitComponentListener - Interface in org.goplanit.component.event: To serve as base listener class for all PLANit component related events, where its onX method provides any graph modification event as parameter
PlanitCrsUtils - Class in org.goplanit.utils.geo: Utilities for coordinate Reference systems
PlanitCrsUtils() - Constructor for class org.goplanit.utils.geo.PlanitCrsUtils
PlanitDemandsReader - Class in org.goplanit.io.converter.demands: Reader to parse PLANit demands from native XML format
PlanitDemandsReader(String, String, Demands) - Constructor for class org.goplanit.io.converter.demands.PlanitDemandsReader: Constructor
PlanitDemandsReader(XMLElementMacroscopicDemand, MacroscopicNetwork, Zoning, Demands) - Constructor for class org.goplanit.io.converter.demands.PlanitDemandsReader: Constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
PlanitDemandsReaderSettings - Class in org.goplanit.io.converter.demands: Settings for the PLANit zoning reader
PlanitDemandsReaderSettings() - Constructor for class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings
PlanItException - Exception in org.goplanit.utils.exceptions: General exception for PlanIt which wraps exceptions thrown during execution
PlanItException(Exception) - Constructor for exception org.goplanit.utils.exceptions.PlanItException: Constructor using Exception - wraps run-time exceptions
PlanItException(String) - Constructor for exception org.goplanit.utils.exceptions.PlanItException: Constructor using String - catches logic-driven exceptions
PlanItException(String, Object...) - Constructor for exception org.goplanit.utils.exceptions.PlanItException: Constructor using formatted string - catches logic-driven exceptions
PlanItException(String, Throwable) - Constructor for exception org.goplanit.utils.exceptions.PlanItException: Constructor using Throwable - wraps run-time exceptions with additional message
PlanItException(String, Throwable, Object...) - Constructor for exception org.goplanit.utils.exceptions.PlanItException: Constructor using formatted string - catches logic-driven exceptions
PlanitExceptionConsumer<T> - Interface in org.goplanit.utils.function: Allows for a consumer interface that throws PlanitExceptions
PlanitExceptionFunction<T,R> - Interface in org.goplanit.utils.function: Allows for a functional interface that throws PlanitExceptions
PlanitGmlUtils - Class in org.goplanit.io.geo: Utilities specific to GML
PlanitGmlUtils() - Constructor for class org.goplanit.io.geo.PlanitGmlUtils
PlanitGraphGeoUtils - Class in org.goplanit.utils.geo: A class with utility methods that levarage the geospatial information of planit enities pertaining to graphs.
PlanitGraphGeoUtils() - Constructor for class org.goplanit.utils.geo.PlanitGraphGeoUtils
planitInfrastructureLayerConfiguration - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: mapping between PLANit modes and the layer their infrastructure will be mapped to.
PlanItInputBuilder - Class in org.goplanit.io.input: Class which reads inputs from XML input files
PlanItInputBuilder(String) - Constructor for class org.goplanit.io.input.PlanItInputBuilder: Constructor which generates the input objects from files in a specified directory, using the default extension ".xml"
PlanItInputBuilder(String, String) - Constructor for class org.goplanit.io.input.PlanItInputBuilder: Constructor which generates the input objects from files in a specified directory
PlanitIntermodalReader - Class in org.goplanit.io.converter.intermodal: Planit intermodal reader in native format.
PlanitIntermodalReader(String, String, MacroscopicNetwork, Zoning) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: constructor where xml content is still on disk and first needs to be parsed into memory before converted to planit memory model
PlanitIntermodalReader(String, String, IdGroupingToken) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: constructor where xml content is still on disk and first needs to be parsed into memory before converted to planit memory model.
PlanitIntermodalReader(PlanitIntermodalReaderSettings, IdGroupingToken) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: constructor where xml content is still on disk and first needs to be parsed into memory before converted to planit memory model.
PlanitIntermodalReader(XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning, MacroscopicNetwork, Zoning) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: constructor where the xml content has already been parsed into a JAXB memory model which subsequently needs to be converted into the planit memory model
PlanitIntermodalReaderFactory - Class in org.goplanit.io.converter.intermodal: Factory class for creating zoning reader in the native PLANit format
PlanitIntermodalReaderFactory() - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderFactory
PlanitIntermodalReaderSettings - Class in org.goplanit.io.converter.intermodal: Settings of PLANit intermodal reader
PlanitIntermodalReaderSettings() - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: Default constructor
PlanitIntermodalReaderSettings(String, String) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: Constructor
PlanitIntermodalReaderSettings(PlanitNetworkReaderSettings, PlanitZoningReaderSettings) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: Constructor
PlanitIntermodalWriter - Class in org.goplanit.io.converter.intermodal: Planit intermodal writer for native Planit format, wrapping a planit network writer and planit zoning writer in one
PlanitIntermodalWriter(String, String, XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: Constructor
PlanitIntermodalWriter(String, XMLElementMacroscopicNetwork, XMLElementMacroscopicZoning) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: Constructor with default country, use default destination Crs as a result.
PlanitIntermodalWriterFactory - Class in org.goplanit.io.converter.intermodal: Factory for creating PLANit intermodal writers persisting both a network and zoning (useful for intermodal networks with pt element where transfer zones are part of the zoning.
PlanitIntermodalWriterFactory() - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterFactory
PlanitIntermodalWriterSettings - Class in org.goplanit.io.converter.intermodal: Settings for Planit intermodal writer
PlanitIntermodalWriterSettings() - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Default constructor
PlanitIntermodalWriterSettings(String, String) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Constructor
PlanitIntermodalWriterSettings(PlanitNetworkWriterSettings, PlanitZoningWriterSettings) - Constructor for class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Constructor
PlanitJtsCrsUtils - Class in org.goplanit.utils.geo: General geographic JTS utilities that rely on a known Coordinate Reference system (CRS).
PlanitJtsCrsUtils() - Constructor for class org.goplanit.utils.geo.PlanitJtsCrsUtils: Constructor Uses default coordinate reference system
PlanitJtsCrsUtils(CoordinateReferenceSystem) - Constructor for class org.goplanit.utils.geo.PlanitJtsCrsUtils: Constructor
PlanitJtsIntersectEdgeVisitor<T extends Edge> - Class in org.goplanit.utils.geo: An item visitor for quadtree spatial index to filter out the edges in a quadtree that truly intersect with the given bounding box provided in the query.
PlanitJtsIntersectEdgeVisitor(Polygon, Collection<T>) - Constructor for class org.goplanit.utils.geo.PlanitJtsIntersectEdgeVisitor: Constructor
PlanitJtsIntersectOsmNodeVisitor - Class in org.goplanit.osm.util: An item visitor for quadtree spatial index to filter out osm nodes in a quadtree that truly intersect with the given bounding box provided in the query.
PlanitJtsIntersectOsmNodeVisitor(Polygon, Collection<OsmNode>) - Constructor for class org.goplanit.osm.util.PlanitJtsIntersectOsmNodeVisitor: Constructor
PlanitJtsIntersectZoneVisitor<T extends Zone> - Class in org.goplanit.utils.geo: An item visitor for quadtree spatial index to filter out the zones in a quadtree that truly intersect with the given bounding box provided in the query.
PlanitJtsIntersectZoneVisitor(Polygon, Collection<T>) - Constructor for class org.goplanit.utils.geo.PlanitJtsIntersectZoneVisitor: Constructor
PlanitJtsItemVisitor<T> - Class in org.goplanit.utils.geo: An item visitor for quadtree spatial index to filter out planit entities in a quadtree that truly intersect with the given bounding box provided in the query.
PlanitJtsItemVisitor(Polygon, Collection<T>) - Constructor for class org.goplanit.utils.geo.PlanitJtsItemVisitor: Constructor
PlanitJtsUtils - Class in org.goplanit.utils.geo: General geographic related utils utilising the JTS API.
PlanitJtsUtils() - Constructor for class org.goplanit.utils.geo.PlanitJtsUtils
PlanitLinkSegmentUtils - Class in org.goplanit.osm.util: Utilities regarding PLANit link segments useful when parsing OSM entities and converting them into PLANit link segments or other PLANit entities that have something to do with link segments.
PlanitLinkSegmentUtils() - Constructor for class org.goplanit.osm.util.PlanitLinkSegmentUtils
PlanitLinkUtils - Class in org.goplanit.osm.util: Utilities regarding PLANit links useful when parsing OSM entities
PlanitLinkUtils() - Constructor for class org.goplanit.osm.util.PlanitLinkUtils
PlanitMatsimWriterSettings - Class in org.goplanit.matsim.util: Base writer settings class to be used by all available matsim writer settings classes.
PlanitMatsimWriterSettings() - Constructor for class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Default constructor
PlanitMatsimWriterSettings(String, String, String) - Constructor for class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Constructor
PlanitNamespacePrefixMapper - Class in org.goplanit.io.xml.util
PlanitNamespacePrefixMapper() - Constructor for class org.goplanit.io.xml.util.PlanitNamespacePrefixMapper
PlanitNetworkLayerUtils - Class in org.goplanit.osm.util: Utilities regarding PLANit network layers with respect to parsing OSM netities for it
PlanitNetworkLayerUtils() - Constructor for class org.goplanit.osm.util.PlanitNetworkLayerUtils
PlanitNetworkReader - Class in org.goplanit.io.converter.network: Implementation of the network reader for the PLANit XML native format
PlanitNetworkReader(String, String, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReader: Constructor
PlanitNetworkReader(PlanitNetworkReaderSettings, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReader: Constructor where settings are directly provided such that input information can be exracted from it
PlanitNetworkReader(PlanitNetworkReaderSettings, IdGroupingToken) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReader: Constructor where settings are directly provided such that input information can be exracted from it
PlanitNetworkReader(XMLElementMacroscopicNetwork, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReader: Constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
PlanitNetworkReaderFactory - Class in org.goplanit.io.converter.network: Factory for creating PLANitNetworkReaders
PlanitNetworkReaderFactory() - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReaderFactory
PlanitNetworkReaderSettings - Class in org.goplanit.io.converter.network: Configurable settings for the PLANit network reader
PlanitNetworkReaderSettings() - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReaderSettings: Default constructor.
PlanitNetworkReaderSettings(String, String) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkReaderSettings: Constructor.
PlanitNetworkWriter - Class in org.goplanit.io.converter.network: Writer to persist a PLANit network to disk in the native PLANit format.
PlanitNetworkWriter(String, String, XMLElementMacroscopicNetwork) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriter: Constructor
PlanitNetworkWriter(String, XMLElementMacroscopicNetwork) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriter: Constructor
PlanitNetworkWriter(XMLElementMacroscopicNetwork) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriter: Constructor
PlanitNetworkWriterFactory - Class in org.goplanit.io.converter.network: Factory for creating PLANit Network writers
PlanitNetworkWriterFactory() - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriterFactory
PlanitNetworkWriterSettings - Class in org.goplanit.io.converter.network: configurable settings for the PLANit writer
PlanitNetworkWriterSettings() - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriterSettings: Default constructor
PlanitNetworkWriterSettings(String, String) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriterSettings: Constructor
PlanitNetworkWriterSettings(String, String, String) - Constructor for class org.goplanit.io.converter.network.PlanitNetworkWriterSettings: Constructor
planitNodesByLocation - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: track the PLANit nodes created on this layer by their location (which reflects eith an osm node, or an auto-generated stop_location, not related to an osm node in the latter case, no osm node is available) so they can be collected when needed, for example when breaking planit links
PlanitOpenGisUtils - Class in org.goplanit.io.geo: General geotools related utils.
PlanitOpenGisUtils() - Constructor for class org.goplanit.io.geo.PlanitOpenGisUtils: Constructor Uses default coordinate reference system
PlanitOpenGisUtils(CoordinateReferenceSystem) - Constructor for class org.goplanit.io.geo.PlanitOpenGisUtils: Constructor
PlanitOsmNetwork - Class in org.goplanit.osm.physical.network.macroscopic: Macroscopic network with additional OSM functionality Disclaimer: The descriptions for the default OSM link segment types have been copied from the OSM Wiki
PlanitOsmNetwork() - Constructor for class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Default Constructor
PlanitOsmNetwork(IdGroupingToken) - Constructor for class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: Constructor
PlanitOsmUtils - Class in org.goplanit.osm.util: Utilities in relation to parsing OSM data and constructing a PLANit model from it that are too general to be moved to any of the more specific PlanitOSMXXXUtils classes.
PlanitOsmUtils() - Constructor for class org.goplanit.osm.util.PlanitOsmUtils
PlanItOutputFormatter - Class in org.goplanit.io.output.formatter: The default output formatter of PlanIt
PlanItOutputFormatter(IdGroupingToken) - Constructor for class org.goplanit.io.output.formatter.PlanItOutputFormatter: Constructor, takes values for properties file name, description and version property
PlanItProject - Class in org.goplanit.io.project: PLANit project which is nothing more than a CustomPlanItProject without any custom configuration pre-embedded.
PlanItProject(String) - Constructor for class org.goplanit.io.project.PlanItProject: Constructor taking project path where to find all project input files
PlanItProjectInput - Class in org.goplanit.project: Class that holds all the input traffic components for a PLANit project.
PlanItProjectInput(long, IdGroupingToken, InputBuilderListener) - Constructor for class org.goplanit.project.PlanItProjectInput: Constructor
PlanitRoutedServicesReader - Class in org.goplanit.io.converter.service: Implementation of a routed service reader in the PLANit XML native format
PlanitRoutedServicesReader(String, String, RoutedServices) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReader: Constructor
PlanitRoutedServicesReader(PlanitRoutedServicesReaderSettings, RoutedServices) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReader: Constructor where settings and routed services to populate are directly provided
PlanitRoutedServicesReader(IdGroupingToken, PlanitRoutedServicesReaderSettings) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReader: Constructor where settings are directly provided such that input information can be extracted from it
PlanitRoutedServicesReader(XMLElementRoutedServices, RoutedServices) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReader: Constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
PlanitRoutedServicesReaderFactory - Class in org.goplanit.io.converter.service: Factory for creating PlanitRoutedServicesReaders
PlanitRoutedServicesReaderFactory() - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReaderFactory
PlanitRoutedServicesReaderSettings - Class in org.goplanit.io.converter.service: Configurable settings for the PLANit routed services reader
PlanitRoutedServicesReaderSettings(ServiceNetwork) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReaderSettings: Constructor
PlanitRoutedServicesReaderSettings(ServiceNetwork, String, String) - Constructor for class org.goplanit.io.converter.service.PlanitRoutedServicesReaderSettings: Constructor.
PlanitSchema - Class in org.goplanit.io.xml.util: Helper class to deal with XSD schema related locations for the various XML components
PlanitSchema() - Constructor for class org.goplanit.io.xml.util.PlanitSchema
PlanitServiceNetworkReader - Class in org.goplanit.io.converter.service: Implementation of a service network reader in the PLANit XML native format
PlanitServiceNetworkReader(String, String, ServiceNetwork) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReader: Constructor
PlanitServiceNetworkReader(PlanitServiceNetworkReaderSettings, ServiceNetwork) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReader: Constructor where settings and service network are directly provided
PlanitServiceNetworkReader(IdGroupingToken, PlanitServiceNetworkReaderSettings) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReader: Constructor where settings are directly provided such that input information can be extracted from it
PlanitServiceNetworkReader(XMLElementServiceNetwork, ServiceNetwork) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReader: Constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
PlanitServiceNetworkReaderFactory - Class in org.goplanit.io.converter.service: Factory for creating PlanitServiceNetworkReaders
PlanitServiceNetworkReaderFactory() - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReaderFactory
PlanitServiceNetworkReaderSettings - Class in org.goplanit.io.converter.service: Configurable settings for the PLANit service network reader
PlanitServiceNetworkReaderSettings(MacroscopicNetwork) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReaderSettings: Constructor
PlanitServiceNetworkReaderSettings(MacroscopicNetwork, String, String) - Constructor for class org.goplanit.io.converter.service.PlanitServiceNetworkReaderSettings: Constructor.
PlanItSimpleProject - Class in org.goplanit.io.project: Wrapper around PLANitProject with most common defaults automatically activated.
PlanItSimpleProject() - Constructor for class org.goplanit.io.project.PlanItSimpleProject: Base constructor for simple project which adopts the PlanItIO input/output format.
PlanItSimpleProject(String) - Constructor for class org.goplanit.io.project.PlanItSimpleProject: Base constructor for simple project which adopts the PlanItIO input/output format
PlanItSimpleProject(PlanItInputBuilder) - Constructor for class org.goplanit.io.project.PlanItSimpleProject: Default constructor without explicit project path (use default)
planitToXml(MotorisationModeType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert motorisation type from PLANit to XML
planitToXml(TrackModeType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert track type from PLANit to XML
planitToXml(UseOfModeType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert used-to type from PLANit to XML
planitToXml(VehicularModeType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert motorisation type from PLANit to XML
planitToXml(Unit) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: Convert time unit from PLANit to XML TimeUnit
PlanitTransferZoneUtils - Class in org.goplanit.osm.util: Static helper methods to support parsing/functionality of PLANit TransferZones
PlanitTransferZoneUtils() - Constructor for class org.goplanit.osm.util.PlanitTransferZoneUtils
PlanitWriterImpl<T> - Class in org.goplanit.io.converter: Common functionality for writing in the native PLANit format across different writers
PlanitWriterImpl(IdMapperType) - Constructor for class org.goplanit.io.converter.PlanitWriterImpl: Constructor
PlanitXmlJaxbParser<T> - Class in org.goplanit.io.xml.util: Serves as a base class for readers of PLANit XML files of which the root element is of type T
PlanitXmlJaxbParser(Class<T>) - Constructor for class org.goplanit.io.xml.util.PlanitXmlJaxbParser: location of where to collect XML file and populate an instance of provided class
PlanitXmlJaxbParser(T) - Constructor for class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Constructor where root element is already provided and assumed to be populated as well
PlanitXmlReaderSettings - Class in org.goplanit.io.xml.util: Settings relevant for a Planit Xml reader
PlanitXmlReaderSettings() - Constructor for class org.goplanit.io.xml.util.PlanitXmlReaderSettings: Default constructor using default file extensino and user must set output dir afterwards manually
PlanitXmlReaderSettings(String, String) - Constructor for class org.goplanit.io.xml.util.PlanitXmlReaderSettings: Constructor
PlanitXmlWriterSettings - Class in org.goplanit.io.xml.util: Settings relevant for persisting Planit Xml output
PlanitXmlWriterSettings() - Constructor for class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Default constructor
PlanitXmlWriterSettings(String) - Constructor for class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Constructor
PlanitXmlWriterSettings(String, String) - Constructor for class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Constructor
PlanitXmlWriterSettings(String, String, String) - Constructor for class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Constructor
PlanitXmlWriterUtils - Class in org.goplanit.utils.xml: Utilities for creating and using basic Java xml writers
PlanitXmlWriterUtils() - Constructor for class org.goplanit.utils.xml.PlanitXmlWriterUtils
PlanitZipFileInputStream - Class in org.goplanit.utils.zip: A wrapper around a ZipFile's InputStream that keeps the underlying file open while an entry is being streamed.
PlanitZipFileInputStream(ZipFile, ZipEntry) - Constructor for class org.goplanit.utils.zip.PlanitZipFileInputStream: Constructor
PlanitZipInputStream - Class in org.goplanit.utils.zip: A wrapper around a ZipInputStream that keeps the underlying input streams alive.
PlanitZipInputStream(BufferedInputStream, FileInputStream) - Constructor for class org.goplanit.utils.zip.PlanitZipInputStream: Constructor
PlanitZoningReader - Class in org.goplanit.io.converter.zoning: Class to parse zoning from native XML format
PlanitZoningReader(String, String, TransportLayerNetwork<?, ?>, Zoning) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReader: Constructor
PlanitZoningReader(PlanitZoningReaderSettings, TransportLayerNetwork<?, ?>, Zoning) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReader: Constructor
PlanitZoningReader(XMLElementMacroscopicZoning, TransportLayerNetwork<?, ?>, Zoning) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReader: Constructor where file has already been parsed and we only need to convert from raw XML objects to PLANit memory model
PlanitZoningReaderFactory - Class in org.goplanit.io.converter.zoning: Factory class for creating zoning reader in the native PLANit format
PlanitZoningReaderFactory() - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReaderFactory
PlanitZoningReaderSettings - Class in org.goplanit.io.converter.zoning: Settings for the PLANit zoning reader
PlanitZoningReaderSettings() - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReaderSettings: Default constructor
PlanitZoningReaderSettings(String, String) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningReaderSettings: Constructor
PlanitZoningUtils - Class in org.goplanit.osm.util: Helper class for the OSM handlers with respect to the PLANit zoning, providing static helper methods to aid when populating the zoning from an OSM data source
PlanitZoningUtils() - Constructor for class org.goplanit.osm.util.PlanitZoningUtils
PlanitZoningWriter - Class in org.goplanit.io.converter.zoning: A class that takes a PLANit zoning and persists it to file in the Planit native XML format.
PlanitZoningWriter(String, String, CoordinateReferenceSystem, XMLElementMacroscopicZoning) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriter: Constructor
PlanitZoningWriterFactory - Class in org.goplanit.io.converter.zoning: Factory for creating PLANit Zoning Writers
PlanitZoningWriterFactory() - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriterFactory
PlanitZoningWriterSettings - Class in org.goplanit.io.converter.zoning: Settings for the planit zoning writer
PlanitZoningWriterSettings() - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriterSettings: Default constructor
PlanitZoningWriterSettings(String) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriterSettings: Constructor
PlanitZoningWriterSettings(String, String) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriterSettings: Constructor
PlanitZoningWriterSettings(String, String, String) - Constructor for class org.goplanit.io.converter.zoning.PlanitZoningWriterSettings: Constructor
PLATFORM - org.goplanit.utils.zoning.TransferZoneType
PLATFORM - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a platform tag used frequently under PTv1 i.c.w.
PLATFORM - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: The place where passengers are waiting for the public transport vehicles, identical to the Ptv1 tag value
PLATFORM_CODE - org.goplanit.gtfs.enums.GtfsKeyType
PLATFORM_EDGE - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags
PLATFORM_ROLE - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: platform members in a stop_area relation take on this role identifier
POINT_QUEUE_ADVANCED - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
POINT_QUEUE_BASIC - org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme
POLE - org.goplanit.utils.zoning.TransferZoneType
populateAustralianSpeedLimits() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Populate the defaults for Australia
PopulateComponentEvent - Class in org.goplanit.component.event: A Populate component event for components for which no dedicated derived event is created and provides access to the component to populate and additional content as is without additional type or contextual information.
PopulateComponentEvent(PlanitComponentFactory<?>, PlanitComponent<?>, Object[]) - Constructor for class org.goplanit.component.event.PopulateComponentEvent: Constructor
populateCountrySpecificDefaultModeAccess() - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: For all countries for which a dedicated CSV is available under the resources dir, we parse their mode access defaults accordingly
populateCountrySpecificDefaultModeAccess(InputStreamReader, String) - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: Each file should be named according to ISO366 alpha 2 country code.
populateCountrySpecificHighwayDefaultSpeedLimits(InputStreamReader, String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: The speed limit defaults are parsed as CSV format and overwrite the global defaults for this country.
populateCountrySpecificRailwayDefaultSpeedLimits(InputStreamReader, String) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: The speed limit defaults are parsed as CSV format and overwrite the global defaults for this country.
populateCountrySpecificSpeedLimits() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Populate the country specific defaults for highway/railway types for supported countries
populateDefaultLanesPerDirection() - Static method in class org.goplanit.osm.defaults.OsmLaneDefaults: Initialise the defaults to use based on "common sense" as outlined in https://wiki.openstreetmap.org/wiki/Key:lanes
populateDefaultRailwaySpeedLimits(OsmSpeedLimitDefaultsCategory) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Populate the defaults for railway types for given country (or global).
populateDemandConfiguration() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: Sets up all the configuration data from the XML demands file
populateDemandContents() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: Parses the demand contents of the XML
populateDemands(Demands, Zoning, MacroscopicNetwork) - Method in class org.goplanit.io.input.PlanItInputBuilder: Populates the Demands object from the input file
populateDemands(Demands, Zoning, MacroscopicNetwork) - Method in class org.goplanit.tntp.input.TntpInputBuilder: Populates the Demands object from the input file
PopulateDemandsEvent - Class in org.goplanit.component.event: A Populate demands event is fired when PLANit requests for a registered listener to populate the newly created demands instance.
PopulateDemandsEvent(PlanitComponentFactory<?>, Demands, Zoning, MacroscopicNetwork) - Constructor for class org.goplanit.component.event.PopulateDemandsEvent: Constructor
populateForPersistence() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: When loading has converged, outputs might be persisted for (intermediate) iterations.
PopulateFundamentalDiagramEvent - Class in org.goplanit.component.event: A Populate fundamental diagram component event is fired when PLANit requests for a registered listener to populate the newly created fundamental diagram component instance.
PopulateFundamentalDiagramEvent(PlanitComponentFactory<?>, FundamentalDiagramComponent, MacroscopicNetworkLayer) - Constructor for class org.goplanit.component.event.PopulateFundamentalDiagramEvent: Constructor
PopulateGapFunctionEvent - Class in org.goplanit.component.event: A Populate gap function event is fired when PLANit requests for a registered listener to populate the newly created gap function instance.
PopulateGapFunctionEvent(PlanitComponentFactory<?>, GapFunction) - Constructor for class org.goplanit.component.event.PopulateGapFunctionEvent: Constructor
populateGlobalDefaultHighwayModeAccess() - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: populate the global defaults for highway types, i.e., roads
populateGlobalDefaultHighwaySpeedLimits() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Populate the global defaults for highway types in case the country is not available, or in case the road type for that country is not available
populateGlobalDefaultRailwayModeAccess() - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: populate the global defaults for railway types
populateGlobalDefaultRailwaySpeedLimits() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: populate the global defaults for railway types in case the country is not available, or in case the railway type for that country is not available.
populateGlobalSpeedLimits() - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: populate the global defaults for highway/railway types
populateInitialLinkSegmentCost(PopulateInitialLinkSegmentCostEvent) - Method in class org.goplanit.io.input.PlanItInputBuilder: Populate the initial link segment cost from a CSV file
PopulateInitialLinkSegmentCostEvent - Class in org.goplanit.component.event: A Populate initial link segment cost event is fired when PLANit requests for a registered listener to populate these initial costs which relate to a specific network.
PopulateInitialLinkSegmentCostEvent(PlanitComponentFactory<?>, InitialLinkSegmentCost, String, MacroscopicNetwork, TimePeriod) - Constructor for class org.goplanit.component.event.PopulateInitialLinkSegmentCostEvent: Constructor
populateIntermodal(Modes) - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Parse the intermodal zones, i.e., platforms, stops, stations, etc.
populateMacroscopicNetwork(MacroscopicNetwork) - Method in class org.goplanit.io.input.PlanItInputBuilder: Creates the macroscopic network object from the data in the input file
populateMacroscopicNetwork(MacroscopicNetwork) - Method in class org.goplanit.tntp.input.TntpInputBuilder: Creates the physical network object from the data in the input file
PopulateNetworkEvent - Class in org.goplanit.component.event: A Populate network event is fired when PLANit requests for a registered listener to populate the newly created network instance.
PopulateNetworkEvent(PlanitComponentFactory<?>, MacroscopicNetwork) - Constructor for class org.goplanit.component.event.PopulateNetworkEvent: Constructor
populateODZones() - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Parse the OD zones from Xml element into Planit memory
populatePhysicalCost(AbstractPhysicalCost, MacroscopicNetwork) - Method in class org.goplanit.tntp.input.TntpInputBuilder: Populate the BPR parameters
PopulatePhysicalCostEvent - Class in org.goplanit.component.event: A Populate physical cost event is fired when PLANit requests for a registered listener to populate the newly created physical cost component.
PopulatePhysicalCostEvent(PlanitComponentFactory<?>, AbstractPhysicalCost, MacroscopicNetwork) - Constructor for class org.goplanit.component.event.PopulatePhysicalCostEvent: Constructor
populateRoutedServices(RoutedServices) - Method in class org.goplanit.io.input.PlanItInputBuilder: Populate the routed services based on the local XML file if it can be found.
PopulateRoutedServicesEvent - Class in org.goplanit.component.event: A Populate routed services event is fired when PLANit requests for a registered listener to populate the newly created routed services instance.
PopulateRoutedServicesEvent(PlanitComponentFactory<?>, RoutedServices) - Constructor for class org.goplanit.component.event.PopulateRoutedServicesEvent: Constructor
populateServiceNetwork(ServiceNetwork) - Method in class org.goplanit.io.input.PlanItInputBuilder: Populate the service network based on the local XML file if it can be found.
PopulateServiceNetworkEvent - Class in org.goplanit.component.event: A Populate service network event is fired when PLANit requests for a registered listener to populate the newly created service network instance.
PopulateServiceNetworkEvent(PlanitComponentFactory<?>, ServiceNetwork) - Constructor for class org.goplanit.component.event.PopulateServiceNetworkEvent: Constructor
PopulateUntypedComponentEvent - Class in org.goplanit.component.event: A Populate component event is fired when PLANit requests for a registered listener to populate the provided PLANit component instance.
PopulateUntypedComponentEvent(PlanitComponentEventType, PlanitComponentFactory<?>, PlanitComponent<?>, Object) - Constructor for class org.goplanit.component.event.PopulateUntypedComponentEvent: Constructor
PopulateUntypedComponentEvent(PlanitComponentEventType, PlanitComponentFactory<?>, PlanitComponent<?>, Object[]) - Constructor for class org.goplanit.component.event.PopulateUntypedComponentEvent: Constructor
populateWithCost(VirtualNetwork, Mode, double[]) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Invoker expects (mode specific ) costs in passed in array to be filled, where each entry signifies a link segment by its id
populateWithCost(VirtualNetwork, Mode, double[]) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Invoker expects (mode specific ) costs in passed in array to be filled, where each entry signifies a link segment by its id
populateWithCost(VirtualNetwork, Mode, double[]) - Method in interface org.goplanit.cost.virtual.VirtualCost: Invoker expects (mode specific ) costs in passed in array to be filled, where each entry signifies a link segment by its id
populateWithCost(UntypedPhysicalLayer<?, ?, ?>, Mode, double[]) - Method in class org.goplanit.cost.physical.AbstractPhysicalCost: Invoker expects (mode specific ) costs in passed in array to be filled, where each entry signifies a link segment by its id.
populateWithCost(UntypedPhysicalLayer<?, ?, ?>, Mode, double[]) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: populate the cost array with the BPR link travel times for all link segments for the specified mode
populateWithCost(UntypedPhysicalLayer<?, ?, ?>, Mode, double[]) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Populate the cost array with the free flow link travel times for all link segments for the specified mode
populateXmlConfiguration(Modes) - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: Populate the link configuration for this network, i.e., the modes
populateXmlLayerConfiguration(XMLElementInfrastructureLayer, MacroscopicLinkSegmentTypes) - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: Populate the layer configuration for this network, i.e., link segment types
populateXmlNetworkLayer(XMLElementInfrastructureLayers, MacroscopicNetworkLayerImpl) - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: Populate the network layer
populateXmlNetworkLayers(MacroscopicNetwork) - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: Populate the available network layers
populateZoning(Zoning, Object) - Method in class org.goplanit.tntp.input.TntpInputBuilder: Creates the Zoning object and connectoids from the data in the network file In TNTP this method does not need to read a TAZ file.
populateZoning(Zoning, MacroscopicNetwork) - Method in class org.goplanit.io.input.PlanItInputBuilder: Creates the Zoning object and connectoids from the data in the input file
PopulateZoningEvent - Class in org.goplanit.component.event: A Populate zoning event is fired when PLANit requests for a registered listener to populate the newly created zoning instance.
PopulateZoningEvent(PlanitComponentFactory<?>, Zoning, MacroscopicNetwork) - Constructor for class org.goplanit.component.event.PopulateZoningEvent: Constructor
position - Variable in class org.goplanit.graph.VertexImpl: Position of the vertex
positionZipEntryInputStream(ZipInputStream, String) - Static method in class org.goplanit.utils.zip.ZipUtils: Move the passed in zip input stream to the starting point of the given zip file entry.
POSTIVE_ACCESS_VALUE_TAGS - Static variable in class org.goplanit.osm.tags.OsmAccessTags: yes permissive designated
postVisit(AcyclicVertexData, LongAdder) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: While traversing the graph recursively, postVisit is invoked AFTER exploring a vertex (successfully).
POWER - org.goplanit.tntp.enums.NetworkFileColumnType
Precision - Class in org.goplanit.utils.math: compare doubles with a certain precision
Precision() - Constructor for class org.goplanit.utils.math.Precision
PredefinedMode - Interface in org.goplanit.utils.mode
PredefinedModeImpl - Class in org.goplanit.mode: A mode that has predefined fixed values so it can easily be understood, or mapped
PredefinedModeImpl(IdGroupingToken, PredefinedModeType, double, double, PhysicalModeFeatures, UsabilityModeFeatures) - Constructor for class org.goplanit.mode.PredefinedModeImpl: A predefined mode
PredefinedModeType - Enum in org.goplanit.utils.mode: While PLANit allows the user to come up with its own modes.
prepareCoordinateReferenceSystem(MacroscopicNetwork, String, CoordinateReferenceSystem) - Method in class org.goplanit.matsim.converter.MatsimWriter: Prepare the Crs transformer (if any) based on the user configuration settings.
prepareCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.io.converter.PlanitWriterImpl: prepare the Crs transformer (if any) based on the user configuration settings
PRESERVED - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
preVisit(AcyclicVertexData, LongAdder) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: While traversing the graph recursively, preVisit is invoked BEFORE exploring a vertex further.
prevIterationFinalSolutionScheme - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: track the solution scheme applied before the current
PRICE - org.goplanit.gtfs.enums.GtfsKeyType
PRIMARY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
PRIMARY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
PRIMARY_LINK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
PRIMARY_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
PRIVATE - org.goplanit.utils.mode.UseOfModeType
PRIVATE - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: private tag
processCircularWays() - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: process all registered circular ways after parsing of basic nodes and ways is complete.
processedInLinkSegments - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModel: track which in-link segments are processed X_topbar.
processSubNetworkVertex(Vertex) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: helper function for subnetwork identification (deliberately NOT recursive to avoid stack overflow on large networks)
ProjectAssignmentBuilders - Class in org.goplanit.project: Container class for registered traffic assignments on PLANit projects
ProjectAssignmentBuilders() - Constructor for class org.goplanit.project.ProjectAssignmentBuilders
ProjectDemands - Class in org.goplanit.project: class for registered demands on project
ProjectDemands() - Constructor for class org.goplanit.project.ProjectDemands: Constructor
ProjectDemands(ProjectDemands) - Constructor for class org.goplanit.project.ProjectDemands: Copy constructor
ProjectNetworks - Class in org.goplanit.project: Internal class for registered physical networks
ProjectNetworks() - Constructor for class org.goplanit.project.ProjectNetworks: Constructor
ProjectNetworks(ProjectNetworks) - Constructor for class org.goplanit.project.ProjectNetworks: Copy constructor
ProjectOdPathSets - Class in org.goplanit.project: class for registered od path sets
ProjectOdPathSets() - Constructor for class org.goplanit.project.ProjectOdPathSets: Constructor
ProjectOdPathSets(ProjectOdPathSets) - Constructor for class org.goplanit.project.ProjectOdPathSets: Copy constructor
ProjectRoutedServices - Class in org.goplanit.project: class for registered routed services on project
ProjectRoutedServices() - Constructor for class org.goplanit.project.ProjectRoutedServices: Constructor
ProjectRoutedServices(ProjectRoutedServices) - Constructor for class org.goplanit.project.ProjectRoutedServices: Copy constructor
ProjectServiceNetworks - Class in org.goplanit.project: class for registered service networks on project
ProjectServiceNetworks() - Constructor for class org.goplanit.project.ProjectServiceNetworks: Constructor
ProjectServiceNetworks(ProjectServiceNetworks) - Constructor for class org.goplanit.project.ProjectServiceNetworks: Copy constructor
projectToken - Variable in class org.goplanit.project.CustomPlanItProject: id generation using this token will be contiguous and unique for all instances created with this token.
ProjectZonings - Class in org.goplanit.project: Class for registered zonings on project
ProjectZonings() - Constructor for class org.goplanit.project.ProjectZonings: Constructor
ProjectZonings(ProjectZonings) - Constructor for class org.goplanit.project.ProjectZonings: Copy constructor
PROPOSED - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
PROPOSED - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
PROPOSED - Static variable in class org.goplanit.osm.tags.OsmTags
PROTOCOL_FILE - Static variable in class org.goplanit.utils.misc.UrlUtils: file protocol string
PT_VEHICLE_STOP - org.goplanit.utils.zoning.ConnectoidType
PUBLIC - org.goplanit.utils.mode.UseOfModeType
PUBLIC_SERVICE_VEHICLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: group indicating any public service vehicle
PUBLIC_TRANSPORT - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: all Ptv2 scheme tags use the public_transport=* key
PUBLIC_TRANSPORT - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
publicServiceVehicleModes - Static variable in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: track the modes that we support as part of public service vehicle (psv) lanes, currently only bus
put(GtfsKeyType, String) - Method in class org.goplanit.gtfs.model.GtfsObject
putRow(Object[], Object...) - Method in class org.goplanit.data.MultiKeyPlanItData: Puts the data values into a specified row
putRowValue(OutputPropertyType, Object, Object...) - Method in class org.goplanit.data.MultiKeyPlanItData: Set the data value for an individual cell

Q

QuadConsumer<T,U,V,W> - Interface in org.goplanit.utils.functionalinterface: Function Interface which can process four input objects.

R

RACEWAY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
RAIL - org.goplanit.utils.mode.TrackModeType
RAIL - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
RAIL_LAYER_ID - Static variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: proposed rail layer id
RAILWAY - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
RAILWAY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default capacity in pcu/h for railways, not that this is generally not used so merely here for consistency
railwayDefaults - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: railway speed limit defaults
RAZED - Static variable in class org.goplanit.osm.tags.OsmRailwayTags: built on top of, no longer a real track
read() - Method in interface org.goplanit.converter.ConverterReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in interface org.goplanit.converter.MultiConverterReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.gtfs.reader.GtfsFileReaderBase: Perform the reading of the file
read() - Method in class org.goplanit.gtfs.reader.GtfsReader: Read GTFS files based on the registered file handlers
read() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: Parse the XMLand populate the demands memory model
read() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.io.converter.service.PlanitRoutedServicesReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.io.converter.service.PlanitServiceNetworkReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Read the zoning from disk
read() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: Parse a local *.osm or *.osm.pbf file and convert it into a Macroscopic network and zoning given the configuration options that have been set
read() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Parse a local *.osm or *.osm.pbf file and convert it into a Macroscopic network given the configuration options that have been set
read() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReader: Parse a local *.osm or *.osm.pbf file and convert it into a PLANit Zoning instance given the configuration options that have been set
read() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReader: parse the network based on the configuration of the implementing class to yield a PLANit network
read() - Method in class org.goplanit.utils.zip.PlanitZipFileInputStream
read(OsmReader, OsmZoningHandlerBase) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReader: conduct reading of data with given reader and handler
receivingFlowData - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: variables tracked for receiving flow update step
ReceivingFlowData - Class in org.goplanit.assignment.ltm.sltm.loading: POJO to store the sLTM variables used for receiving flow updates (Step 4) in network loading
ReceivingFlowData(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Constructor
receivingFlowGapFunction - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: the gap function to apply on receiving flow update step
RECORD_ID - org.goplanit.gtfs.enums.GtfsKeyType
RECORD_SUB_ID - org.goplanit.gtfs.enums.GtfsKeyType
recreateAccessZoneIdMapping() - Method in class org.goplanit.zoning.ConnectoidImpl: recreate the id mapping for the registered access zones
recreateConnectoidEdgeId(IdGroupingToken) - Method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: recreate the internal connectoid edge id and set it
recreateConnectoidIds() - Method in interface org.goplanit.utils.zoning.modifier.ZoningModifier: recreate all internal ids fo all connectoids both od and transfer connectoids
recreateConnectoidIds() - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: recreate all internal ids fo all connectoids both od and transfer connectoids
recreateConnectoidSegmentId(IdGroupingToken) - Method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: recreate the internal connectoid segment id and set it
recreateIds() - Method in interface org.goplanit.utils.id.ManagedIdEntities: Identical to ManagedIdEntities.recreateIds(boolean)
recreateIds(boolean) - Method in class org.goplanit.network.layer.physical.LinkSegmentsImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.network.layer.physical.LinksImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.network.layer.physical.NodesImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.network.virtual.ConnectoidEdgesImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.network.virtual.ConnectoidSegmentsImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in interface org.goplanit.utils.id.ManagedIdEntities: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.utils.id.ManagedIdEntitiesImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.zoning.DirectedConnectoidsImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.zoning.OdZonesImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.zoning.TransferZonesImpl: Recreate the ids for all registered entities with or without resetting
recreateIds(boolean) - Method in class org.goplanit.zoning.UndirectedConnectoidsImpl: Recreate the ids for all registered entities with or without resetting
recreateLinkId(IdGroupingToken) - Method in class org.goplanit.network.layer.physical.LinkImpl: recreate the internal link id and set it
recreateLinkSegmentId(IdGroupingToken) - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: recreate the internal link segment id and set it
recreateManagedEntitiesIds() - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: This method will recreate all ids of the graph's components, e.g., vertices, edges, etc.
recreateManagedEntitiesIds() - Method in class org.goplanit.graph.modifier.GraphModifierImpl: This method will recreate all ids of the graph's components, e.g., vertices, edges, etc.
recreateManagedEntitiesIds() - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: This method will recreate all ids of the graph's components, e.g., vertices, edges, etc.
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.graph.GraphEntityImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.graph.UntypedGraphImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.mode.ModeImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.layer.physical.LinkImpl: Recreate id and link id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Recreate internal ids: id and link segment id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.layer.TransportLayerImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: Recreate internal ids: id and connectoid edge id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: Recreate internal ids: id and connectoid segment id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.path.DirectedPathImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedServiceImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedServicesLayerImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedTripDeparture: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedTripImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in interface org.goplanit.utils.id.ManagedId: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.ConnectoidImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.DirectedConnectoidImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.OdZoneImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.TransferZoneGroupImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.TransferZoneImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: recreate the internal id(s) and set them including the Idable id
recreateManagedIds(IdGroupingToken) - Method in class org.goplanit.zoning.ZoneImpl: recreate the internal id(s) and set them including the Idable id
recreateTransferZoneGroupIds() - Method in interface org.goplanit.utils.zoning.modifier.ZoningModifier: recreate all internal ids fo all zones both od and transfer zones
recreateTransferZoneGroupIds() - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: recreate all internal ids fo all zones both od and transfer zones
recreateTransferZoneGroupsZoneIdMapping() - Method in class org.goplanit.zoning.TransferZoneGroupsImpl: Update all transfer zone groups' id mappings for underlying transfer zones since the transfer zone id might have changed
recreateTransferZoneIdMapping() - Method in class org.goplanit.zoning.TransferZoneGroupImpl: recreate the mapping such that all the keys used for each transfer zone reflect their internal id.
recreateZoneIds() - Method in interface org.goplanit.utils.zoning.modifier.ZoningModifier: recreate all internal ids fo all zones both od and transfer zones
recreateZoneIds() - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: recreate all internal ids fo all zones both od and transfer zones
REF - Static variable in class org.goplanit.osm.tags.OsmTags
referenceNetwork - Variable in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Reference network to use when demand relate to network entities
referenceNetwork - Variable in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: the reference network this zoning is supposed to be compatible with
referenceNetwork - Variable in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: the network these demands relates to
referenceNetwork - Variable in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings: the network this zoning relates to
referenceZoning - Variable in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Reference zoning to use when demands relate to zoning entities
referenceZoning - Variable in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: the zoning these demands relate to
ReflectionUtils - Class in org.goplanit.utils.reflection: Reflection specific utility functions
ReflectionUtils() - Constructor for class org.goplanit.utils.reflection.ReflectionUtils
register(DirectedEdge, EdgeSegment, boolean) - Method in class org.goplanit.graph.directed.EdgeSegmentsImpl: Register a edge segment (not registered on nodes and edge)
register(DirectedEdge, EdgeSegment, boolean) - Method in interface org.goplanit.utils.graph.directed.EdgeSegments: Register a edge segment (not registered on nodes and edge)
register(MacroscopicLinkSegment, FundamentalDiagram) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Register the given fundamental diagram for the link segment.
register(MacroscopicLinkSegment, NewellFundamentalDiagram) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Register the given Newell fundamental diagram for the link segment.
register(MacroscopicLinkSegmentType, FundamentalDiagram) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Register the given fundamental diagram for the link segment type.
register(MacroscopicLinkSegmentType, NewellFundamentalDiagram) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramComponent: Register the given Newell fundamental diagram for the link segment type.
register(V) - Method in interface org.goplanit.utils.wrapper.MapWrapper: Register on the internal container
register(V) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Register on the internal container
registerBySourceId(Class<U>, V) - Method in class org.goplanit.converter.BaseReaderImpl: Stores an object by its source Id, after checking whether the external Id is a duplicate
registerBySourceId(V) - Method in class org.goplanit.converter.BaseReaderImpl: Stores an object by its source Id, after checking whether the external Id is a duplicate
registerComponent(Class<? extends PlanitComponent<?>>, PlanitComponent<?>) - Method in class org.goplanit.assignment.TrafficAssignment: Register a PLANit component on this assignment
registerConnectoidSegment(ConnectoidSegment, boolean) - Method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: Register connectoidSegment.
registerConnectoidSegment(ConnectoidSegment, boolean) - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdge: Register connectoidSegment.
registerDelayedMethodCall(String, Object...) - Method in class org.goplanit.utils.builder.Configurator: Register a method call to a setter that should be invoked on the to be configured object instance once it is available
registerEdgeSegment(EdgeSegment, boolean) - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: Register EdgeSegment.
registerEdgeSegment(EdgeSegment, boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: Register EdgeSegment.
registeredPlanitComponents - Static variable in class org.goplanit.component.PlanitComponentFactory: Register per traffic assignment component type the derived classes that are supported
registerEligibleTrafficComponentClass(Class<? extends PlanitComponent<?>>) - Method in class org.goplanit.project.CustomPlanItProject: Register a class that we allow to be instantiated as a concrete implementation of a traffic assignment component that can be used in PLANit
registerInitialLinkSegmentCost(InitialLinkSegmentCost) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Register all available initial costs, both time period agnostic and time period specific, 1:1 on the assignment
registerInitialLinkSegmentCost(InitialModesLinkSegmentCost) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Register the initial link segment cost without relating it to a particular period, meaning that it is applied to all time periods that do not have a specified initial link segment costs registered for them
registerInitialLinkSegmentCost(TimePeriod, InitialModesLinkSegmentCost) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Register the initial link segment cost for a specified time period
registerIterationGap(double) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Register the found gap for the iteration
registerLayerData(MacroscopicNetworkLayer, OsmNetworkReaderLayerData) - Method in class org.goplanit.osm.converter.network.OsmNetworkToZoningReaderData: register layer specific data
registerLocationAsInternalToPlanitLink(Point, Link) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: add a mapping from location to the (initial) PLANit link it is internal to
registerNew() - Method in class org.goplanit.graph.directed.DirectedVertexFactoryImpl: Create and register new directed vertex
registerNew() - Method in class org.goplanit.graph.VertexFactoryImpl: Create and register new entity
registerNew() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerFactoryImpl: Create a new macroscopic network layer instance
registerNew() - Method in class org.goplanit.network.layer.physical.NodeFactoryImpl: Create and register new node
registerNew() - Method in class org.goplanit.path.ContainerisedDirectedPathFactoryImpl: Create new path
registerNew() - Method in class org.goplanit.service.routed.RoutedServiceFactory: Register a newly created instance on the underlying container
registerNew() - Method in class org.goplanit.service.routed.RoutedTripFactory: Register a newly created instance on the underlying container
registerNew() - Method in interface org.goplanit.utils.graph.directed.DirectedVertexFactory: Create and register new directed vertex
registerNew() - Method in interface org.goplanit.utils.graph.VertexFactory: Create and register new entity
registerNew() - Method in interface org.goplanit.utils.network.layer.physical.NodeFactory: Create and register new node
registerNew() - Method in interface org.goplanit.utils.network.layers.MacroscopicNetworkLayerFactory: Create a new macroscopic network layer instance
registerNew() - Method in interface org.goplanit.utils.path.ContainerisedDirectedPathFactory: Create new path
registerNew() - Method in interface org.goplanit.utils.zoning.OdZoneFactory: Create and register new OD zone
registerNew() - Method in interface org.goplanit.utils.zoning.TransferZoneFactory: Create and register new transfer zone
registerNew() - Method in interface org.goplanit.utils.zoning.TransferZoneGroupFactory: create and register a new transferZoneGroup
registerNew() - Method in class org.goplanit.zoning.OdZoneFactoryImpl: Create and register new OD zone
registerNew() - Method in class org.goplanit.zoning.TransferZoneFactoryImpl: Create and register new transfer zone
registerNew() - Method in class org.goplanit.zoning.TransferZoneGroupFactoryImpl: create and register a new transferZoneGroup
registerNew(String) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Create and register new macroscopic link segment type on network without explicitly setting capacity, max density, nor access group properties.
registerNew(String) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactory: Create and register new macroscopic link segment type on network without explicitly setting capacity, max density, nor access group properties.
registerNew(String, double, double) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Create and register new macroscopic link segment type on network.
registerNew(String, double, double) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactory: Create and register new macroscopic link segment type on network.
registerNew(String, double, double, Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Create and register new macroscopic link segment type on network.
registerNew(String, double, double, Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactory: Create and register new macroscopic link segment type on network.
registerNew(LocalTime) - Method in class org.goplanit.service.routed.RoutedTripDepartureFactory: Register a newly created instance on the underlying container
registerNew(Deque<? extends EdgeSegment>) - Method in class org.goplanit.path.ContainerisedDirectedPathFactoryImpl: Create new path based on the provided edge segments
registerNew(Deque<? extends EdgeSegment>) - Method in interface org.goplanit.utils.path.ContainerisedDirectedPathFactory: Create new path based on the provided edge segments
registerNew(DirectedEdge, boolean, boolean) - Method in class org.goplanit.graph.directed.EdgeSegmentFactoryImpl: Create directional edge segment and register it
registerNew(DirectedEdge, boolean, boolean) - Method in interface org.goplanit.utils.graph.directed.EdgeSegmentFactory: Create directional edge segment and register it
registerNew(DirectedVertex, DirectedVertex) - Method in interface org.goplanit.utils.graph.directed.DirectedEdgeFactory: Create and register new directed edge to graph identified via its id, (not registered on vertices)
registerNew(DirectedVertex, DirectedVertex, boolean) - Method in class org.goplanit.graph.directed.DirectedEdgeFactoryImpl: Create new edge to network identified via its id, allow to be registered on vertices if indicated)
registerNew(DirectedVertex, DirectedVertex, boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedEdgeFactory: Create new edge to network identified via its id, allow to be registered on vertices if indicated)
registerNew(Vertex, Vertex) - Method in interface org.goplanit.utils.graph.EdgeFactory: Create new edge to graph identified via its id, (not registered on vertices)
registerNew(Vertex, Vertex, boolean) - Method in class org.goplanit.graph.EdgeFactoryImpl: Create new edge to network identified via its id, allow to be registered on vertices if indicated)
registerNew(Vertex, Vertex, boolean) - Method in interface org.goplanit.utils.graph.EdgeFactory: Create new edge to network identified via its id, allow to be registered on vertices if indicated)
registerNew(Mode...) - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerFactoryImpl: Create a new macroscopic network layer instance
registerNew(Mode...) - Method in interface org.goplanit.utils.network.layers.MacroscopicNetworkLayerFactory: Create a new macroscopic network layer instance
registerNew(PredefinedModeType) - Method in class org.goplanit.mode.ModeFactoryImpl: Create and register a new predefined mode.
registerNew(PredefinedModeType) - Method in interface org.goplanit.utils.mode.ModeFactory: Create and register a new predefined mode.
registerNew(MacroscopicNetworkLayer) - Method in class org.goplanit.network.layer.ServiceNetworkLayerFactoryImpl: Create a new service network layer
registerNew(MacroscopicNetworkLayer) - Method in interface org.goplanit.utils.network.layers.ServiceNetworkLayerFactory: Create a new service network layer
registerNew(Link, boolean, boolean) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentFactoryImpl: Create a macroscopic link segment and register it
registerNew(Link, boolean, boolean) - Method in class org.goplanit.network.layer.physical.LinkSegmentFactoryImpl: Create link segment and register it
registerNew(Link, boolean, boolean) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentFactory: Create a macroscopic link segment and register it
registerNew(Link, boolean, boolean) - Method in interface org.goplanit.utils.network.layer.physical.LinkSegmentFactory: Create link segment and register it
registerNew(Link, MacroscopicLinkSegmentType, boolean, boolean) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentFactoryImpl: Create a macroscopic link segment and register it
registerNew(Link, MacroscopicLinkSegmentType, boolean, boolean) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentFactory: Create a macroscopic link segment and register it
registerNew(LinkSegment) - Method in interface org.goplanit.utils.zoning.DirectedConnectoidFactory: Create a new directed connectoid with default length 0 and no parent zone (yet)
registerNew(LinkSegment) - Method in class org.goplanit.zoning.DirectedConnectoidFactoryImpl: Create a new directed connectoid with default length 0 and no parent zone (yet)
registerNew(LinkSegment, Zone) - Method in interface org.goplanit.utils.zoning.DirectedConnectoidFactory: Create a new directed connectoid, with default length 0
registerNew(LinkSegment, Zone) - Method in class org.goplanit.zoning.DirectedConnectoidFactoryImpl: Create a new directed connectoid, with default length 0
registerNew(LinkSegment, Zone, double) - Method in interface org.goplanit.utils.zoning.DirectedConnectoidFactory: Create a new directed connectoid
registerNew(LinkSegment, Zone, double) - Method in class org.goplanit.zoning.DirectedConnectoidFactoryImpl: Create a new directed connectoid
registerNew(Node) - Method in class org.goplanit.network.layer.service.ServiceNodeFactoryImpl: Create a new service node
registerNew(Node) - Method in interface org.goplanit.utils.network.layer.service.ServiceNodeFactory: Create a new service node
registerNew(Node) - Method in interface org.goplanit.utils.zoning.UndirectedConnectoidFactory: factory method for undirected connectoid, with default length of 0 to use between (yet unknown parent) zone and access node
registerNew(Node) - Method in class org.goplanit.zoning.UndirectedConnectoidFactoryImpl: factory method for undirected connectoid, with default length of 0 to use between (yet unknown parent) zone and access node
registerNew(Node, Node, double) - Method in interface org.goplanit.utils.network.layer.physical.LinkFactory: Create new link on links container (not registered on nodes)
registerNew(Node, Node, double, boolean) - Method in class org.goplanit.network.layer.physical.LinkFactoryImpl: Create new link on links container, allow to be registered on nodes if indicated)
registerNew(Node, Node, double, boolean) - Method in interface org.goplanit.utils.network.layer.physical.LinkFactory: Create new link on links container, allow to be registered on nodes if indicated)
registerNew(Node, Zone) - Method in interface org.goplanit.utils.zoning.UndirectedConnectoidFactory: factory method for undirected connectoid, with default length of 0 to use between zone and access node
registerNew(Node, Zone) - Method in class org.goplanit.zoning.UndirectedConnectoidFactoryImpl: factory method for undirected connectoid, with default length of 0 to use between zone and access node
registerNew(Node, Zone, double) - Method in interface org.goplanit.utils.zoning.UndirectedConnectoidFactory: factory method for undirected connectoid
registerNew(Node, Zone, double) - Method in class org.goplanit.zoning.UndirectedConnectoidFactoryImpl: factory method for undirected connectoid
registerNew(ServiceLeg, boolean) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegSegmentFactory: create a new service leg segment and register it on the underlying container (without registering on service node and leg)
registerNew(ServiceLeg, boolean, boolean) - Method in class org.goplanit.network.layer.service.ServiceLegSegmentFactoryImpl: create a new service leg segment and register it on the underlying container and allow the user to let the factory register the newly create segment on both the parent leg and service nodes in the correct direction if desired
registerNew(ServiceLeg, boolean, boolean) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegSegmentFactory: create a new service leg segment and register it on the underlying container and allow the user to let the factory register the newly create segment on both the parent leg and service nodes in the correct direction if desired
registerNew(ServiceNode, ServiceNode) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegFactory: Create new service leg on container (not registered on nodes)
registerNew(ServiceNode, ServiceNode, boolean) - Method in class org.goplanit.network.layer.service.ServiceLegFactoryImpl: Create new service leg on container
registerNew(ServiceNode, ServiceNode, boolean) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegFactory: Create new service leg on container
registerNew(ServiceNode, ServiceNode, List<Link>, boolean) - Method in class org.goplanit.network.layer.service.ServiceLegFactoryImpl: Create new link on links container, allow to be registered on nodes if indicated)
registerNew(ServiceNode, ServiceNode, List<Link>, boolean) - Method in interface org.goplanit.utils.network.layer.service.ServiceLegFactory: Create new link on links container, allow to be registered on nodes if indicated)
registerNew(ServiceNetworkLayer) - Method in class org.goplanit.service.routed.RoutedServicesLayerFactory: Register a newly created instance on the underlying container
registerNew(ConnectoidEdge, boolean) - Method in class org.goplanit.network.virtual.ConnectoidSegmentFactoryImpl: Create and register connectoid segment in AB direction on container
registerNew(ConnectoidEdge, boolean) - Method in interface org.goplanit.utils.network.virtual.ConnectoidSegmentFactory: Create and register connectoid segment in AB direction on container
registerNew(Connectoid) - Method in class org.goplanit.network.virtual.ConnectoidEdgeFactoryImpl: Create new connectoid edges from a specified connectoid to all centroids of the zones this connectoid has registered as access zone.
registerNew(Connectoid) - Method in interface org.goplanit.utils.network.virtual.ConnectoidEdgeFactory: Create new connectoid edges from a specified connectoid to all centroids of the zones this connectoid has registered as access zone.
registerNewCustomMode(String, double, double, PhysicalModeFeatures, UsabilityModeFeatures) - Method in class org.goplanit.mode.ModeFactoryImpl: Create and register new mode
registerNewCustomMode(String, double, double, PhysicalModeFeatures, UsabilityModeFeatures) - Method in interface org.goplanit.utils.mode.ModeFactory: Create and register new mode
registerNewWithCapacity(String, double) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Create and register new macroscopic link segment type on network without explicitly setting capacity, nor access group properties.
registerNewWithCapacity(String, double) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactory: Create and register new macroscopic link segment type on network without explicitly setting capacity, nor access group properties.
registerNewWithMaxDensity(String, double) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactoryImpl: Create and register new macroscopic link segment type on network without explicitly setting capacity, nor accessgroup properties.
registerNewWithMaxDensity(String, double) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentTypeFactory: Create and register new macroscopic link segment type on network without explicitly setting capacity, nor accessgroup properties.
registerOdDemandPcuHour(TimePeriod, Mode, OdDemands) - Method in class org.goplanit.demands.Demands: Register provided odDemand
registerOdPathMatrix(OdPathMatrix) - Method in class org.goplanit.path.OdPathSets: register the passed in path matrix (not copied)
registerOnNodes(ServiceLegImpl) - Method in class org.goplanit.network.layer.service.ServiceLegFactoryImpl: Register the leg on its nodes
registerOrigin(Bush) - Method in class org.goplanit.assignment.ltm.sltm.Pas: Register origin on the PAS
registerOsmModesOnTransferZone(TransferZone, Collection<String>) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: While PLANit does not require access modes on transfer zones because it is handled by connectoids, OSM stop_positions (connectoids) might lack the required tagging to identify their mode access in which case we revert to the related transfer zone to deduce it.
registerOsmNodeAsInternalToPlanitLink(OsmNode, Link) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Add a mapping from OSM node id to the (initial) planit link it is internal to
registerOutputFormatter(OutputFormatter) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Register an output formatter
registerOutputFormatter(OutputFormatter) - Method in class org.goplanit.output.OutputManager: Register the output formatter on the output manager.
registerOutputTypeAdapter(OutputTypeAdapter) - Method in class org.goplanit.output.OutputManager: Register the OutputTypeAdapter for a given output type
registerOutputTypeAdapter(OutputType, OutputTypeAdapter) - Method in class org.goplanit.output.adapter.OutputAdapter: Store an output type adapters for a specified output type
registerPlanitComponentType(Class<? extends PlanitComponent<?>>) - Static method in class org.goplanit.component.PlanitComponentFactory: Register a component type that one can choose for the given PLANit component
registerPlanitNodeByLocation(Point, Node) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: register a PLANit node based on a location only, instead of based on an osm node
registerPlanitNodeByOsmNode(OsmNode, Node) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: Register a PLANit node based on an OSM node for this layer
registerPotentiallyBlockingNode(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Register a potentially blocking node so we not only track its splitting rates but also mark it as potentially blocking.
registerSupportedMode(Mode) - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: A service network does not allow for registering supported modes as the supported modes are defined by its parent network already.
registerSupportedMode(Mode) - Method in class org.goplanit.network.layer.TransportLayerImpl: register a mode as supported by this layer
registerSupportedMode(Mode) - Method in interface org.goplanit.utils.network.layer.TransportLayer: register a mode as supported by this layer
registerSupportedModes(Collection<Mode>) - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: A service network does not allow for registering supported modes as the supported modes are defined by its parent network already.
registerSupportedModes(Collection<Mode>) - Method in class org.goplanit.network.layer.TransportLayerImpl: register modes as supported by this layer
registerSupportedModes(Collection<Mode>) - Method in interface org.goplanit.utils.network.layer.TransportLayer: register modes as supported by this layer
registerTrackedNode(DirectedVertex) - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Register a node so we are able to track its splitting rates (and turn flows) during loading
registerTransferZoneOnGroup(long, EntityType, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Register a transfer zone on a group by providing the OSM id of the transfer zone and its type, if no transfer zone is available for this combination, false is returned and it is not registered.
registerTransferZoneOnGroup(OsmEntity, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Register a transfer zone on a group by providing the OSM entity, if no transfer zone is available for this combination, false is returned and it is not registered.
registerTransferZoneOnGroup(OsmNode, Map<String, String>, TransferZoneGroup) - Method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Register a transfer zone on a group by providing the OSM node, if no transfer zone is available for this combination, false is returned and it is not registered.
REGULAR - org.goplanit.utils.event.EventListenerPriority
RelativeLegTiming - Class in org.goplanit.service.routed: Simple POJO class that refers to a service leg and its duration and dwell time on a scheduled routed trip
RelativeLegTiming(RelativeLegTiming) - Constructor for class org.goplanit.service.routed.RelativeLegTiming: Copy constructor
RelativeLegTiming(ServiceLegSegment, LocalTime, LocalTime) - Constructor for class org.goplanit.service.routed.RelativeLegTiming: Constructor
RELAXED_HASH_CODE_SCALE - Static variable in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: precision scale to apply for the relaxed hash code to compare fundamental diagrams on being identical regarding their floating point variables, where 6 equates to 6 decimals of precision
relaxedHashCode(int) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: A fundamental diagram is based on a limited number of double variables to define it.
relaxedHashCode(int) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagramBranch: A fundamental diagram branch is based on a limited number of double variables to define it.
relaxedHashCode(int) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramImpl: A fundamental diagram is based on a limited number of double variables to define it.
relaxedHashCode(int) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: A fundamental diagram branch is based on a limited number of double variables to define it.
ReleaseEvent - Class in org.goplanit.assignment.ltm.eltm.event: A release event represents the arrival of a trigger event at the opposite link boundary from where it originated.
ReleaseEvent(EventType, TriggerEvent, CumulativePoint, Serializable) - Constructor for class org.goplanit.assignment.ltm.eltm.event.ReleaseEvent: Constructor
ReleaseFlowEvent - Class in org.goplanit.assignment.ltm.eltm.event: A release flow event represents a flow rate that is being released on a link boundary on the opposite border from where it was triggered through a trigger event.
ReleaseFlowEvent(TriggerFlowEvent, CumulativePoint, double) - Constructor for class org.goplanit.assignment.ltm.eltm.event.ReleaseFlowEvent: Constructor
remainingReceivingFlows - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModel: store the remaining receiving flows of each outgoing link segment
remove(long) - Method in interface org.goplanit.utils.wrapper.LongMapWrapper: Remove value from map by the long key
remove(long) - Method in class org.goplanit.utils.wrapper.LongMapWrapperImpl: Remove value from map by the long key
remove(DirectedVertex) - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Remove the vertex from the edge segment if it is either the up or downstream vertex
remove(DirectedVertex) - Method in interface org.goplanit.utils.graph.EdgeSegment: Remove the vertex from the edge segment if it is either the up or downstream vertex
remove(V) - Method in interface org.goplanit.utils.wrapper.MapWrapper: Remove value from map
remove(V) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Remove value from map
removeAccessMode(Mode) - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: Remove access mode
removeAccessMode(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: Remove access mode
removeAllListeners() - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Remove all registered listeners
removeAllListeners() - Method in class org.goplanit.utils.event.EventProducerImpl: Remove all the listeners from this producer
removeAllListeners() - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierEventProducer: Remove all registered listeners
removeAllowedModeCategories(String, boolean, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: remove the passed in mode categories as allowed for all its child modes
removeAllowedModeCategories(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: remove the passed in mode categories as allowed for all its child modes
removeAllowedModes(String, boolean, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: remove the passed in modes as modes that are no longer allowed access for the given way type
removeAllowedModes(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: remove the passed in modes as modes that are no longer allowed access for the given highway type
removeAllProperties() - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Remove all properties from the current output list
removeAllRoadModes() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: remove all road modes from the network when parsing
removeAllUnproccessedStations(OsmPtVersionScheme) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Remove all unprocessed station of a particular pt version that are currently still registered
removeAllUnproccessedStations(OsmPtVersionScheme, EntityType) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Remove all unprocessed station of a particular pt version and type that are currently still registered
removeConnectoidsWithAccessVertex(Vertex) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: Remove connectoids for the given access vertex
removeDanglingSubGraphs() - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: remove any dangling sub graphs from the graph if they exist and reorder the ids if needed
removeDanglingSubGraphs(Integer, Integer, boolean) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: remove any dangling subgraphs below a given size from the graph if they exist and subsequently reorder the internal ids if needed
removeDanglingSubGraphs(Integer, Integer, boolean) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: remove any dangling subgraphs below a given size from the graph if they exist and subsequently reorder the internal ids if needed
removeDanglingSubGraphs(Integer, Integer, boolean) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: remove any dangling subgraphs below a given size from the graph if they exist and subsequently reorder the internal ids if needed
removeDanglingSubnetworks() - Method in class org.goplanit.network.UntypedPhysicalNetwork: remove any dangling subnetworks from the network's layers if they exist and subsequently reorder the internal ids if needed
removeDanglingSubnetworks() - Method in interface org.goplanit.utils.network.layer.modifier.TopologicalLayerModifier: remove any dangling subnetworks from the layer if they exist and subsequently reorder the internal ids if needed
removeDanglingSubnetworks(Integer, Integer, boolean) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: remove any dangling subnetworks below a given size from the network if they exist and subsequently reorder the internal ids if needed.
removeDanglingSubnetworks(Integer, Integer, boolean) - Method in class org.goplanit.network.UntypedPhysicalNetwork: remove any dangling subnetworks below a given size from the network if they exist and subsequently reorder the internal ids if needed
removeDanglingSubnetworks(Integer, Integer, boolean) - Method in interface org.goplanit.utils.network.layer.modifier.TopologicalLayerModifier: remove any dangling subnetworks below a given size from the network if they exist and subsequently reorder the internal ids if needed
removeDanglingSubNetworks - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: flag indicating if dangling subnetworks should be removed after parsing the network OSM network often have small roads that appear to be connected to larger roads, but in fact are not.
removeDanglingSubNetworks() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: Remove dangling subnetworks when settings dictate it
removeDanglingSubNetworks(Zoning) - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: remove dangling subnetworks when settings dictate it.
removeDanglingTransferZoneGroups() - Method in interface org.goplanit.utils.zoning.modifier.ZoningModifier: a Method that scans the transfer zone groups and removes any groups that are empty, i.e., have no transfer zones and are therefore considered dangling.
removeDanglingTransferZoneGroups() - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: a Method that scans the transfer zone groups and removes any groups that are empty, i.e., have no transfer zones and are therefore considered dangling.
removeDanglingTransferZoneGroups(Zoning) - Static method in class org.goplanit.osm.util.PlanitZoningUtils: remove any dangling transfer zone groups
removeDanglingZones() - Method in interface org.goplanit.utils.zoning.modifier.ZoningModifier: a Method that scans the zones and removes any zones that are not associated with any connectoids, i.e., are not connected to any physical network layer and therefore are considered dangling.
removeDanglingZones() - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: a Method that scans the zones and removes any zones that are not associated with any connectoids, i.e., are not connected to any physical network layer and therefore are considered dangling.
removeDanglingZones(Zoning) - Static method in class org.goplanit.osm.util.PlanitZoningUtils: remove any dangling zones
RemoveDirectedSubGraphListener - Interface in org.goplanit.utils.graph.modifier: A listener interface to be triggered whenever planit entities are removed from the network due to a sub graph being removed.
removeDisallowedModes(String, boolean, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: remove the passed in modes as modes that are NOT allowed access for the given highway type
removeDisallowedModes(String, String...) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Remove the passed in modes as modes that are NOT allowed access for the given highway type
removeEdge(long) - Method in class org.goplanit.graph.VertexImpl: Remove edge
removeEdge(long) - Method in interface org.goplanit.utils.graph.Vertex: Remove edge
removeEdge(Edge) - Method in interface org.goplanit.utils.graph.Vertex: Remove edge
removeEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Remove an edge segment on the subgraph
removeEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Remove edgeSegment on either entry or exit side of vertex
removeEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedSubGraph: Remove an edge segment on the subgraph
removeEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Remove edgeSegment on either entry or exit side of vertex
removeEdgesWithOsmHighwayTypesLessImportantThan(String, Set<? extends Edge>) - Static method in class org.goplanit.osm.util.OsmWayUtils: Remove all edges with osm way types that are deemed less prominent than the one provided based on the osm highway tags ordering
removeEndingStringWhenPresent(String, String) - Static method in class org.goplanit.utils.misc.StringUtils: Remove the given string from the end of the string if present and return result
removeEntryEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Remove entry edgeSegment
removeEntryEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Remove entry edgeSegment
removeExitEdgeSegment(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedVertexImpl: Remove exit edgeSegment
removeExitEdgeSegment(EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Remove exit edgeSegment
removeFromAllTransferZoneGroups() - Method in interface org.goplanit.utils.zoning.TransferZone: remove this transfer zone from all groups it is registered on (and also update the group references
removeFromAllTransferZoneGroups() - Method in class org.goplanit.zoning.TransferZoneImpl: remove this transfer zone from all groups it is registered on (and also update the group references
removeFromTransferZoneGroup(TransferZoneGroup) - Method in interface org.goplanit.utils.zoning.TransferZone: remove from transfer zone group provided and also remove ths transfer zone from group provided
removeFromTransferZoneGroup(TransferZoneGroup) - Method in class org.goplanit.zoning.TransferZoneImpl: remove from transfer zone group provided and also remove ths transfer zone from group provided
removeInitialScheme(URI) - Static method in class org.goplanit.utils.misc.UriUtils: create URI without its initial scheme (if any), if no scheme, return original uri
removeInitialStringWhenPresent(String, String) - Static method in class org.goplanit.utils.misc.StringUtils: Remove the given string from the beginning of the string if present and return result
removeLayer(String) - Method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: remove a proposed layer, this means that all modes mapped to this layer are no longer mapped at all
removeLinksFromSpatialLinkIndex(Collection<Link>) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Remove provided links from local spatial index based on links
removeListener(PlanitComponentListener) - Method in class org.goplanit.component.PlanitComponentFactory: Remove listener for all event types of this producer
removeListener(PlanitComponentListener, PlanitComponentEventType) - Method in class org.goplanit.component.PlanitComponentFactory: Remove listener for given event type
removeListener(EventListener) - Method in class org.goplanit.utils.event.EventProducerImpl: Remove listener from all event types it is registered on
removeListener(EventListener, EventType) - Method in class org.goplanit.utils.event.EventProducerImpl: Remove a listener for a given event type
removeListener(GraphModifierListener) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Remove listener for all event types it is registered for
removeListener(GraphModifierListener) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Remove listener for all event types it is registered for
removeListener(GraphModifierListener) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Remove listener for all event types it is registered for
removeListener(GraphModifierListener) - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierEventProducer: Remove listener for all event types it is registered for
removeListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: Remove listener for given event type
removeListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: Remove listener for given event type
removeListener(GraphModifierListener, GraphModifierEventType) - Method in class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Remove listener for given event type
removeListener(GraphModifierListener, GraphModifierEventType) - Method in interface org.goplanit.utils.graph.modifier.event.GraphModifierEventProducer: Remove listener for given event type
removeListener(ZoningModifierListener) - Method in interface org.goplanit.utils.zoning.modifier.event.ZoningModifierEventProducer: Remove listener for all event types it is registered for
removeListener(ZoningModifierListener) - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: Remove listener for all event types it is registered for
removeListener(ZoningModifierListener, ZoningModifierEventType) - Method in interface org.goplanit.utils.zoning.modifier.event.ZoningModifierEventProducer: Remove listener for given event type
removeListener(ZoningModifierListener, ZoningModifierEventType) - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: Remove listener for given event type
removeMode(Mode) - Method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: remove mode from any layer
removeModeAccess(Set<Mode>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Remove mode access for the passed in modes
removeModeAccess(Mode) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Remove the mode properties for the passed in mode (if present)
removeModeAccess(Mode) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Remove the mode properties for the passed in mode (if present)
removeOsmHighwayTypeWhenUnsupported() - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: remove default type in case activate type is not supported by the reader
removeOsmMode2PlanitModeMapping(String) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Remove a mapping from OSM road mode to PLANit mode.
removeOsmRailModePlanitModeMapping(String) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: Remove a mapping from OSM road mode to PLANit mode.
removeOsmRailModePlanitModeMapping(List<String>) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: remove a mapping from OSM rail modes to PLANit modes.
removeOsmRelationOuterRoleOsmWay(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: Remove marked entry for keeping
removeOsmRoadModePlanitModeMapping(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: remove a mapping from OSM road mode to PLANit mode.
removeOsmRoadModePlanitModeMapping(List<String>) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: Remove a mapping from OSM road modes to PLANit modes.
removeParentEdge() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: remove the parent edge from this edge segment
removeParentEdge() - Method in interface org.goplanit.utils.graph.EdgeSegment: remove the parent edge from this edge segment
removePas(Pas) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Remove the PAS from the manager
removePlanitEntitiesBeyondValue(Map<? extends T, Double>, Double) - Static method in class org.goplanit.utils.geo.PlanitGraphGeoUtils: Remove all entities that fall outside provided maxDistance
removeProperty(String) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Remove an output property from the list of properties to be included in the output file
removeProperty(OutputPropertyType) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Remove an output property from the list of properties to be included in the output file
removeSubGraph(Set<? extends DirectedVertex>) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: remove the subgraph identified by the passed in vertices
removeSubGraph(Set<? extends Vertex>) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: remove the subgraph identified by the passed in vertices
removeSubGraph(Set<? extends V>) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: remove the subgraph identified by the passed in vertices
RemoveSubGraphEdgeEvent - Class in org.goplanit.graph.modifier.event: Event for when an edge has been removed from a (sub) graph
RemoveSubGraphEdgeEvent(GraphModifier<?, ?>, Edge) - Constructor for class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeEvent: Constructor
RemoveSubGraphEdgeSegmentEvent - Class in org.goplanit.graph.modifier.event: Event for when an edge segment has been removed from a (sub) graph
RemoveSubGraphEdgeSegmentEvent(GraphModifier<?, ?>, EdgeSegment) - Constructor for class org.goplanit.graph.modifier.event.RemoveSubGraphEdgeSegmentEvent: Constructor
RemoveSubGraphEvent - Class in org.goplanit.graph.modifier.event: Event called after a portion (subgraph) of a graph has been removed
RemoveSubGraphEvent(GraphModifier<?, ?>) - Constructor for class org.goplanit.graph.modifier.event.RemoveSubGraphEvent: Constructor
RemoveSubGraphListener - Interface in org.goplanit.utils.graph.modifier: A listener interface to be triggered whenever PLANit entities are removed from the network due to a sub graph being removed.
RemoveSubGraphListenerImpl - Class in org.goplanit.utils.graph.modifier: A base class implementation for remove sub graph listeners
RemoveSubGraphListenerImpl() - Constructor for class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: Constructor
RemoveSubGraphListenerImpl(RemoveSubGraphListenerImpl) - Constructor for class org.goplanit.utils.graph.modifier.RemoveSubGraphListenerImpl: Copy constructor
removeSubGraphOf(DirectedVertex) - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: remove the (sub)graph in which the passed in vertex resides.
removeSubGraphOf(Vertex) - Method in class org.goplanit.graph.modifier.GraphModifierImpl: remove the (sub)graph in which the passed in vertex resides.
removeSubGraphOf(V) - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: remove the (sub)graph in which the passed in vertex resides.
RemoveSubGraphVertexEvent - Class in org.goplanit.graph.modifier.event: Event for when a vertex has been removed from a (sub) graph
RemoveSubGraphVertexEvent(GraphModifier<?, ?>, Vertex) - Constructor for class org.goplanit.graph.modifier.event.RemoveSubGraphVertexEvent: Constructor
removeTransferZone(TransferZone) - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: remove a transfer zone from the group, and also remove the reference on the transfer zone at the same time
removeTransferZone(TransferZone) - Method in class org.goplanit.zoning.TransferZoneGroupImpl: remove a transfer zone from the group, and also remove the reference on the transfer zone at the same time
removeTurn(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.Bush: Remove a turn from the bush by removing it from the acyclic graph and removing any data associated with it
removeTurn(EdgeSegment, EdgeSegment) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Remove the turn
removeUnproccessedStation(OsmPtVersionScheme, OsmEntity) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: remove an unprocessed station
removeUnprocessedStopPosition(long) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: remove unprocessed stop position
removeVertex(Vertex) - Method in class org.goplanit.graph.EdgeImpl: Remove vertex from edge
removeVertex(Vertex) - Method in interface org.goplanit.utils.graph.Edge: Remove vertex from edge
removeVertexA() - Method in class org.goplanit.graph.EdgeImpl: remove vertex A by setting it to null
removeVertexB() - Method in class org.goplanit.graph.EdgeImpl: remove vertex B by setting it to null
removeVirtualNetworkFromPhysicalNetwork() - Method in class org.goplanit.network.transport.TransportModelNetwork: Remove the edges and edge segments on the vertices of both virtual and physical networks
removeZone(Zone) - Method in class org.goplanit.zoning.modifier.ZoningModifierImpl: remove a zone from its container class (if applicable) without doing anything else
replace(DirectedVertex, DirectedVertex) - Method in interface org.goplanit.utils.graph.EdgeSegment: Replace one of the vertices of the edge segment
replace(Edge, Edge, boolean) - Method in interface org.goplanit.utils.graph.Vertex: replace one edge with the other
replace(EdgeSegment, EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: replace passed in edge segment (if present) with the passed in one
replace(EdgeSegment, EdgeSegment) - Method in interface org.goplanit.utils.graph.directed.DirectedEdge: replace passed in edge segment (if present) with the passed in one
replace(EdgeSegment, EdgeSegment, boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: replace edge segment
replace(Vertex, Vertex) - Method in class org.goplanit.graph.EdgeImpl: Replace one of the vertices of the link
replace(Vertex, Vertex) - Method in interface org.goplanit.utils.graph.Edge: Replace one of the vertices of the link
replaceAccessLinkSegment(EdgeSegment) - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: Replace the access link segment for this connectoid
replaceAccessLinkSegment(EdgeSegment) - Method in class org.goplanit.zoning.DirectedConnectoidImpl: Replace the access link segment for this connectoid
replaceEntrySegment(EdgeSegment, EdgeSegment, boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Identical to replace, only now we consider solely the exist segments for the replacing (in case the to replace segment could be an entry segment that we must keep)
replaceExitSegment(EdgeSegment, EdgeSegment, boolean) - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Identical to replace, only now we consider solely the exist segments for the replacing (in case the to replace segment could be an entry segment that we must keep)
required() - Static method in class org.goplanit.gtfs.util.GtfsFileConditions: Create a file condition indicating it is required
REQUIRED - org.goplanit.gtfs.enums.GtfsFileTypePresence
requiredInAbsenceOf(GtfsFileType) - Static method in class org.goplanit.gtfs.util.GtfsFileConditions: Create a file condition indicating it is required if another file is not present
requiredinPresenceOf(GtfsFileType) - Static method in class org.goplanit.gtfs.util.GtfsFileConditions: Create a file condition indicating it is required if another file is present
requireLanesModeSchemeHelper(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmLanesModeTaggingSchemeHelper: Verify if any modes that can be identified via the lanes:<mode> tagging scheme are currently activated via the settings making it worthwhile to utilise this tagging scheme.
requireLanesModeSchemeHelper(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmModeLanesTaggingSchemeHelper: Verify if any modes that can be identified via the <mode>:lanes tagging scheme are currently activated via the settings making it worthwhile to utilise this tagging scheme.
requireTaggingSchemeHelper(OsmNetworkReaderSettings, MacroscopicNetworkLayer) - Static method in class org.goplanit.osm.converter.helper.OsmLaneTaggingSchemeHelper: Verify if any modes that can be identified via a currently derived tagging scheme are activated via the settings making it worthwhile to utilise the (derived) tagging scheme.
reset() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.assignment.ltm.eltm.EventBasedLtm: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.assignment.ltm.LtmAssignment: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: Reset to initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset to initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Reset to initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: Reset all sending flows
reset() - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Reset all splitting rate data
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Reset the network loading
reset() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Reset to initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Reset the data
reset() - Method in class org.goplanit.assignment.SimulationData: reset to initial state
reset() - Method in class org.goplanit.assignment.TrafficAssignment: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.component.PlanitComponent: All components should be able to reset going back to some representative initial state
reset() - Method in interface org.goplanit.converter.ConverterEntity: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in interface org.goplanit.converter.ConverterReaderSettings: be able to reset all settings if needed
reset() - Method in interface org.goplanit.converter.ConverterWriterSettings: reset settings after persisting
reset() - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: return to pre-BPRLinkTravelTimeCost.initialiseBeforeSimulation(TransportLayerNetwork) state
reset() - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Resetting initial cost will cause all intial costs to be removed
reset() - Method in class org.goplanit.cost.physical.initial.ManualInitialLinkSegmentCost: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Full reset returns to pre-SteadyStateTravelTimeCost.initialiseBeforeSimulation(TransportLayerNetwork) state.
reset() - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Chosen cost is considered configuration not internal state, so upon resetting the chosen cost remains in tact
reset() - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Chosen speed is considered configuration not internal state, so upon resetting the chosen speed remains in tact
reset() - Method in class org.goplanit.demands.Demands: reset all demands, traveler types, time periods and user classes
reset() - Method in class org.goplanit.gap.GapFunction: Reset the gap function
reset() - Method in class org.goplanit.gap.LinkBasedRelativeDualityGapFunction: Reset the gap function
reset() - Method in class org.goplanit.gap.NormBasedGapFunction: Reset
reset() - Method in class org.goplanit.graph.modifier.DirectedGraphModifierImpl: reset all state related information of the instance
reset() - Method in class org.goplanit.graph.modifier.GraphModifierImpl: reset all state related information of the instance
reset() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: reset settings after persisting
reset() - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.network.PlanitNetworkReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.network.PlanitNetworkWriterSettings: Reset content
reset() - Method in class org.goplanit.io.converter.service.PlanitRoutedServicesReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.service.PlanitRoutedServicesReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.service.PlanitServiceNetworkReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.service.PlanitServiceNetworkReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.zoning.PlanitZoningReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.io.converter.zoning.PlanitZoningWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.io.converter.zoning.PlanitZoningWriterSettings: Reset content
reset() - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Reset content
reset() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: reset settings after persisting
reset() - Method in class org.goplanit.matsim.converter.MatsimNetworkWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: reset settings after persisting
reset() - Method in class org.goplanit.matsim.converter.MatsimZoningWriter: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: reset settings after persisting
reset() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Reset the layer
reset() - Method in class org.goplanit.network.layer.physical.LinkSegmentsImpl: When reset it called, it not only clears the entries, but also resets the managedids, such that when the container is reused the managed ids start from zero again.
reset() - Method in class org.goplanit.network.layer.physical.LinksImpl: When reset it called, it not only clears the entries, but also resets the managedids, such that when the container is reused the managed ids start from zero again.
reset() - Method in class org.goplanit.network.layer.physical.NodesImpl: When reset it called, it not only clears the entries, but also resets the managedids, such that when the container is reused the managed ids start from zero again.
reset() - Method in class org.goplanit.network.layer.TransportLayerImpl: Reset the layer
reset() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: Reset the layer
reset() - Method in class org.goplanit.network.Network: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.network.TransportLayerNetwork: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkHandler: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkPreProcessingHandler: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: reset
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: reset contents of members
reset() - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerProfiler: reset the profiler
reset() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPostProcessingHandler: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningPreProcessingHandler: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningProcessingHandler: reset the contents, mainly to free up unused resources
reset() - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderData: reset the handler
reset() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: reset the handler
reset() - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderPlanitData: Reset the PLANit data tracking containers
reset() - Method in class org.goplanit.osm.physical.network.macroscopic.ModifiedLinkSegmentTypes: remove all identified modified link segment types available
reset() - Method in class org.goplanit.output.adapter.OutputAdapter: remove all registered output type adapters
reset() - Method in class org.goplanit.output.OutputManager: Remove all registered formatters and adapters, only retain the configuration
reset() - Method in class org.goplanit.path.choice.logit.MultinomialLogit: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.path.OdPathSets: remove all registered path sets.
reset() - Method in class org.goplanit.sdinteraction.smoothing.MSASmoothing: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.service.routed.RoutedServices: reset by removing all layers and what is in them
reset() - Method in interface org.goplanit.service.routed.RoutedServiceTripInfo: Remove all registered frequency and schedule based trips
reset() - Method in class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Remove all registered frequency and schedule based trips
reset() - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.supply.network.nodemodel.TampereNodeModelComponent: All components should be able to reset going back to some representative initial state
reset() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings: be able to reset all settings if needed
reset() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReader: reset the reader to allow for marking unnecessary resources for garbage collection
reset() - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings: be able to reset all settings if needed
reset() - Method in interface org.goplanit.utils.graph.modifier.GraphModifier: reset all state related information of the instance
reset() - Static method in class org.goplanit.utils.id.IdGenerator: Reset the id generation across all registered tokens
reset() - Method in interface org.goplanit.utils.id.ManagedIdEntities: When reset it called, it not only clears the entries, but also resets the managedids, such that when the container is reused the managed ids start from zero again.
reset() - Method in class org.goplanit.utils.id.ManagedIdEntitiesImpl: When reset it called, it not only clears the entries, but also resets the managedids, such that when the container is reused the managed ids start from zero again.
reset() - Method in interface org.goplanit.utils.network.layer.TransportLayer: Reset the layer
reset() - Method in class org.goplanit.zoning.Zoning: All components should be able to reset going back to some representative initial state
reset(IdGroupingToken) - Static method in class org.goplanit.utils.id.IdGenerator: Reset the id generation for a specific token
reset(IdGroupingToken, Class<? extends Object>) - Static method in class org.goplanit.utils.id.IdGenerator: Reset the id generation for a specific token and class
resetChildManagedIdEntities() - Method in class org.goplanit.network.layer.MacroscopicNetworkLayerImpl: Each class that has a managed id, should be able to reset any children that themselves are managedIdEntity containers.
resetChildManagedIdEntities() - Method in class org.goplanit.service.routed.RoutedServiceImpl: Each class that has a managed id, should be able to reset any children that themselves are managedIdEntity containers.
resetChildManagedIdEntities() - Method in interface org.goplanit.service.routed.RoutedServicesLayer: Each class that has a managed id, should be able to reset any children that themselves are managedIdEntity containers.
resetChildManagedIdEntities() - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Each class that has a managed id, should be able to reset any children that themselves are managedIdEntity containers.
resetChildManagedIdEntities() - Method in interface org.goplanit.utils.id.ManagedId: Each class that has a managed id, should be able to reset any children that themselves are managedIdEntity containers.
resetCsvDirectory() - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Call this method to delete all existing files in the CSV output directory
resetCurrentFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset current flow acceptance factors (alphas)
resetCurrentFlowCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset current flow capacity factors (betas)
resetCurrentNetworkSegmentFlows() - Method in class org.goplanit.assignment.traditionalstatic.ModeData: Reset current network segment flows
resetCurrentReceivingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Reset current network segment flows
resetCurrentSendingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: Reset current network segment flows
resetCurrentStorageCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset current storage capacity factors (gammas)
resetInflows() - Method in class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: Reset the inflows
resetIteration() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Reset the network loading for the next iteration
resetNextFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset the flow acceptance factors for the coming iteration (alphas)
resetNextFlowCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset the flow capacity factors for the coming iteration (betas)
resetNextNetworkSegmentFlows() - Method in class org.goplanit.assignment.traditionalstatic.ModeData: Reset the segment flows for the coming iteration
resetNextReceivingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Reset the segment flows for the coming iteration
resetNextSendingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: Reset the segment flows for the coming iteration
resetNextStorageCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: Reset the storage capacity factors for the coming iteration (gammas)
resetOutflows() - Method in class org.goplanit.assignment.ltm.sltm.loading.InflowOutflowData: Reset the outflows
resetPathMatrix(Mode, OdZones) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Reset the path matrix to empty for a specified mode for all activated
resetPotentiallyBlockingNodes() - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Reset registered potentially blocking nodes
resetPotentiallyBlockingNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Reset registered potentially blocking nodes
resetPotentiallyBlockingNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Reset registered potentially blocking nodes
resetSkimMatrix(Mode, OdZones, OdOutputTypeConfiguration) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Reset the skim matrix to all zeroes for a specified mode for all activated skim output types
resetSplittingRates() - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Reset splitting rate data
resetSplittingRates() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Reset splitting rate data
resetSplittingRates() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Reset splitting rate data
resetTo(IdGroupingToken, Class<? extends Object>, long) - Static method in class org.goplanit.utils.id.IdGenerator: Reset the id generation for a specific token and class to the given offset
resetTrackedNodes() - Method in interface org.goplanit.assignment.ltm.sltm.loading.SplittingRateData: Reset registered tracked nodes
resetTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Reset registered tracked nodes
resetTrackedNodes() - Method in class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Reset registered tracked nodes
resetXmlDirectory() - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Call this method to delete all existing files in the XML output directory
RESIDENTIAL - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
RESIDENTIAL_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
RESOURCES_RELEASE_GENERIC - Static variable in class org.goplanit.io.xml.util.PlanitSchema: base location for any resources (such as schemas) for any release version, but without the actual version or resource appended yet
ResourceUtils - Class in org.goplanit.utils.resource: Utilities to access resources in the Java environment
ResourceUtils() - Constructor for class org.goplanit.utils.resource.ResourceUtils
RESTRICTION - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
RESULT_PRIORITY - org.goplanit.output.property.OutputPropertyPriority
REVERSE_SIGNPOSTED_AS - org.goplanit.gtfs.enums.GtfsKeyType
REVERSIBLE - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
RIDE_SHARE - org.goplanit.utils.mode.UseOfModeType
RIGHT - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
RIGHT - Static variable in class org.goplanit.osm.tags.OsmTags
ROAD - org.goplanit.utils.mode.TrackModeType
ROAD - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
ROAD_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
ROUNDABOUT - Static variable in class org.goplanit.osm.tags.OsmJunctionTags
ROUNDHOUSE - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
ROUTE - org.goplanit.gtfs.enums.GtfsObjectType
ROUTE - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
ROUTE_COLOR - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_DESC - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_ID - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_LONG_NAME - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_MASTER - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
ROUTE_SHORT_NAME - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_SORT_ORDER - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_TEXT_COLOR - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
ROUTE_URL - org.goplanit.gtfs.enums.GtfsKeyType
ROUTED_SERVICE_ID_CLASS - Static variable in interface org.goplanit.service.routed.RoutedService: id class for generating ids
ROUTED_SERVICES_LAYER_ID_CLASS - Static variable in interface org.goplanit.service.routed.RoutedServicesLayer: id class for generating ids
ROUTED_SERVICES_XSD_FILE - Static variable in class org.goplanit.io.converter.service.PlanitRoutedServicesReader: Default XSD files used to validate input XML files against, TODO: move to properties file
ROUTED_TRIP_DEPARTURE_ID_CLASS - Static variable in class org.goplanit.service.routed.RoutedTripDeparture: id class for generating ids
ROUTED_TRIP_ID_CLASS - Static variable in interface org.goplanit.service.routed.RoutedTrip: id class for generating ids
routedModeServices - Variable in class org.goplanit.service.routed.RoutedServiceFactory: container to use
RoutedModeServices - Interface in org.goplanit.service.routed: Interface for wrapper container class around RoutedModeServices for a particular mode.
RoutedModeServicesImpl - Class in org.goplanit.service.routed: Implementation of the RoutedModeServices interface
RoutedModeServicesImpl(RoutedModeServicesImpl) - Constructor for class org.goplanit.service.routed.RoutedModeServicesImpl: Copy constructor
RoutedModeServicesImpl(IdGroupingToken, Mode) - Constructor for class org.goplanit.service.routed.RoutedModeServicesImpl: Constructor
RoutedService - Interface in org.goplanit.service.routed: Interface to reflect a routed service.
RoutedServiceFactory - Class in org.goplanit.service.routed: Factory for creating routed service instances on underlying container
RoutedServiceFactory(IdGroupingToken, RoutedModeServices) - Constructor for class org.goplanit.service.routed.RoutedServiceFactory: Constructor
RoutedServiceImpl - Class in org.goplanit.service.routed: Implementation of a RoutedService instance based on the RoutedService interface
RoutedServiceImpl(RoutedServiceImpl) - Constructor for class org.goplanit.service.routed.RoutedServiceImpl: Copy constructor
RoutedServiceImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedServiceImpl: Constructor
routedServices - Variable in class org.goplanit.project.CustomPlanItProject: The registered routed services
routedServices - Variable in class org.goplanit.project.PlanItProjectInput: The registered routed services
RoutedServices - Class in org.goplanit.service.routed: Routed services are service that follow a predefined paths (route) on a service network layer that are offered as a service of some sort, i.e., it either follows a schedule or a frequency.
RoutedServices(RoutedServices) - Constructor for class org.goplanit.service.routed.RoutedServices: Copy constructor
RoutedServices(IdGroupingToken, ServiceNetwork) - Constructor for class org.goplanit.service.routed.RoutedServices: Constructor
RoutedServicesLayer - Interface in org.goplanit.service.routed: Interface to reflect a routed services layer which in turn is to be managed by a container class that implements the RoutedServicesLayers interface.
RoutedServicesLayerFactory - Class in org.goplanit.service.routed: Factory for creating routed services layer instances (on container)
RoutedServicesLayerFactory(IdGroupingToken, RoutedServicesLayers) - Constructor for class org.goplanit.service.routed.RoutedServicesLayerFactory: Constructor
RoutedServicesLayerImpl - Class in org.goplanit.service.routed: Implementation of the RoutedServicesLayer interface
RoutedServicesLayerImpl(RoutedServicesLayerImpl) - Constructor for class org.goplanit.service.routed.RoutedServicesLayerImpl: Copy constructor
RoutedServicesLayerImpl(IdGroupingToken, ServiceNetworkLayer) - Constructor for class org.goplanit.service.routed.RoutedServicesLayerImpl: Constructor
routedServicesLayers - Variable in class org.goplanit.service.routed.RoutedServicesLayerFactory: container to use
RoutedServicesLayers - Interface in org.goplanit.service.routed: Interface for wrapper container class around RoutedServiceLayer instances.
RoutedServicesLayersImpl - Class in org.goplanit.service.routed: Implementation of the RoutedServicesLayers interface.
RoutedServicesLayersImpl(RoutedServicesLayersImpl) - Constructor for class org.goplanit.service.routed.RoutedServicesLayersImpl: Copy constructor
RoutedServicesLayersImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedServicesLayersImpl: Constructor
RoutedServicesReader - Interface in org.goplanit.converter.service: Interface to read a PLANit RoutedServices instance
RoutedServiceTripInfo - Interface in org.goplanit.service.routed: Interface to reflect one or more similar routed service trips by providing information on their route legs and schedule/frequencies.
RoutedServiceTripInfoImpl - Class in org.goplanit.service.routed: Implementation of a RoutedServiceTripInfo interface
RoutedServiceTripInfoImpl(RoutedServiceTripInfoImpl) - Constructor for class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Copy constructor
RoutedServiceTripInfoImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedServiceTripInfoImpl: Constructor
RoutedTrip - Interface in org.goplanit.service.routed: Base interface for routed trips.
RoutedTripDeparture - Class in org.goplanit.service.routed: A representation of a departure within a routed trip
RoutedTripDeparture(RoutedTripDeparture) - Constructor for class org.goplanit.service.routed.RoutedTripDeparture: Copy constructor
RoutedTripDeparture(IdGroupingToken, LocalTime) - Constructor for class org.goplanit.service.routed.RoutedTripDeparture: Constructor
RoutedTripDepartureFactory - Class in org.goplanit.service.routed: Factory for creating routed trip departure instances (on container)
RoutedTripDepartureFactory(IdGroupingToken, RoutedTripDepartures) - Constructor for class org.goplanit.service.routed.RoutedTripDepartureFactory: Constructor
routedTripDepartures - Variable in class org.goplanit.service.routed.RoutedTripDepartureFactory: container to use
RoutedTripDepartures - Interface in org.goplanit.service.routed: A container class for departures registered on a schedule based routed trip
RoutedTripDeparturesImpl - Class in org.goplanit.service.routed: Class that manages all routed trip departures
RoutedTripDeparturesImpl(RoutedTripDeparturesImpl) - Constructor for class org.goplanit.service.routed.RoutedTripDeparturesImpl: Copy constructor
RoutedTripDeparturesImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripDeparturesImpl: Constructor
RoutedTripFactory<T extends RoutedTrip> - Class in org.goplanit.service.routed: Factory for creating routed trips of type T
RoutedTripFactory(IdGroupingToken, RoutedTrips<T>) - Constructor for class org.goplanit.service.routed.RoutedTripFactory: Constructor
RoutedTripFrequency - Interface in org.goplanit.service.routed: Interface for frequency based trips of a RoutedService.
RoutedTripFrequencyFactory - Class in org.goplanit.service.routed: Factory for creating routed trips that are frequency based
RoutedTripFrequencyFactory(IdGroupingToken, RoutedTripsFrequency) - Constructor for class org.goplanit.service.routed.RoutedTripFrequencyFactory: Constructor
RoutedTripFrequencyImpl - Class in org.goplanit.service.routed: Implementation of a RoutedTripFrequency interface.
RoutedTripFrequencyImpl(RoutedTripFrequencyImpl) - Constructor for class org.goplanit.service.routed.RoutedTripFrequencyImpl: Copy constructor
RoutedTripFrequencyImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripFrequencyImpl: Constructor
RoutedTripImpl - Class in org.goplanit.service.routed: Implementation of a RoutedTrip interface.
RoutedTripImpl(RoutedTripImpl) - Constructor for class org.goplanit.service.routed.RoutedTripImpl: Copy constructor
RoutedTripImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripImpl: Constructor
routedTrips - Variable in class org.goplanit.service.routed.RoutedTripFactory: container to use
RoutedTrips<T extends RoutedTrip> - Interface in org.goplanit.service.routed: Base class for routed trips container for some derived type of RoutedTrip (either schedule or frequency based for example).
RoutedTripSchedule - Interface in org.goplanit.service.routed: The schedule with on or more departures for a routed service as well as the relative timings of each leg for each departure.
RoutedTripScheduleFactory - Class in org.goplanit.service.routed: Factory for creating routed trips that are schedule based
RoutedTripScheduleFactory(IdGroupingToken, RoutedTripsSchedule) - Constructor for class org.goplanit.service.routed.RoutedTripScheduleFactory: Constructor
RoutedTripScheduleImpl - Class in org.goplanit.service.routed: Implementation of a RoutedTripSchedule interface.
RoutedTripScheduleImpl(RoutedTripScheduleImpl) - Constructor for class org.goplanit.service.routed.RoutedTripScheduleImpl: Copy constructor
RoutedTripScheduleImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripScheduleImpl: Constructor
RoutedTripsFrequency - Interface in org.goplanit.service.routed: Interface for wrapper container class around RoutedTrip instances that define a frequency based schedule.
RoutedTripsFrequencyImpl - Class in org.goplanit.service.routed: Implementation of the RoutedTripsFrequency interface.
RoutedTripsFrequencyImpl(RoutedTripsFrequencyImpl) - Constructor for class org.goplanit.service.routed.RoutedTripsFrequencyImpl: Copy constructor
RoutedTripsFrequencyImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripsFrequencyImpl: Constructor
RoutedTripsImpl<T extends RoutedTrip> - Class in org.goplanit.service.routed: Base class for toued trips of some derived type (either schedule or frequency based for example).
RoutedTripsImpl(RoutedTripsImpl<T>) - Constructor for class org.goplanit.service.routed.RoutedTripsImpl: Copy constructor
RoutedTripsImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripsImpl: Constructor
RoutedTripsSchedule - Interface in org.goplanit.service.routed: Interface for wrapper container class around RoutedTrip instances that define an explicit schedule.
RoutedTripsScheduleImpl - Class in org.goplanit.service.routed: Implementation of the RoutedTripsSchedule interface.
RoutedTripsScheduleImpl(RoutedTripsScheduleImpl) - Constructor for class org.goplanit.service.routed.RoutedTripsScheduleImpl: Copy constructor
RoutedTripsScheduleImpl(IdGroupingToken) - Constructor for class org.goplanit.service.routed.RoutedTripsScheduleImpl: Constructor
ROUTES - org.goplanit.gtfs.enums.GtfsFileType
run() - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Run the Tampere node model
RUN_ID - org.goplanit.output.property.OutputPropertyType
RunIdOutputProperty - Class in org.goplanit.output.property
RunIdOutputProperty() - Constructor for class org.goplanit.output.property.RunIdOutputProperty

S

SAINT_KITS_NEVIS - Static variable in class org.goplanit.utils.locale.CountryNames
SAINT_LUCIA - Static variable in class org.goplanit.utils.locale.CountryNames
SAINT_VINCENT_GRENADINES - Static variable in class org.goplanit.utils.locale.CountryNames
SAMOA - Static variable in class org.goplanit.utils.locale.CountryNames
SATURDAY - org.goplanit.gtfs.enums.GtfsKeyType
scaledRemainingTurnSendingFlows - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModel: store the remaining turn sending flows
second - Variable in class org.goplanit.utils.misc.Pair: The second object in this Pair
second() - Method in class org.goplanit.utils.misc.Pair: Get second object in pair
SECOND - org.goplanit.utils.unit.UnitType
SECOND - Static variable in interface org.goplanit.utils.unit.Unit: predefined SECOND TimeUnit
SECOND_2_HOUR - Static variable in class org.goplanit.utils.unit.TimeUnit: second to hour conversion multiplier
SECOND_2_MINUTE - Static variable in class org.goplanit.utils.unit.TimeUnit: second to minute conversion multiplier
SECONDARY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
SECONDARY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
SECONDARY_LINK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
SECONDARY_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
SECONDS - org.goplanit.tntp.enums.TimeUnits
sendingFlowData - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: variables tracked for sending flow update step
SendingFlowData - Class in org.goplanit.assignment.ltm.sltm.loading: POJO to store the sLTM variables used for sending flow updates (Step 2) in network loading
SendingFlowData(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: Constructor
sendingFlowGapFunction - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: the gap function to apply on sending flow update step
sendingFlows - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkFlowUpdateData: The sending flows to update in case the applied solution scheme is the POINT_QUEUE_BASIC scheme
SEPARATE - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: separately mapped tag mainly used by bicycle/pedestrian mode
SEPARATE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
SEPARATE - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
serialize(Object) - Static method in class org.goplanit.utils.misc.CloneUtils: Serialise an object
SERVICE - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
SERVICE_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
SERVICE_ID - org.goplanit.gtfs.enums.GtfsKeyType
SERVICE_NETWORK_XSD_FILE - Static variable in class org.goplanit.io.converter.service.PlanitServiceNetworkReader: Default XSD files used to validate input XML files against, TODO: move to properties file
ServiceLeg - Interface in org.goplanit.utils.network.layer.service: Service leg interface which extends the Edge interface.
ServiceLegFactory - Interface in org.goplanit.utils.network.layer.service: Factory interface for creating service leg instances
ServiceLegFactoryImpl - Class in org.goplanit.network.layer.service: Factory for creating service legs on service leg container
ServiceLegFactoryImpl(IdGroupingToken, GraphEntities<ServiceLeg>) - Constructor for class org.goplanit.network.layer.service.ServiceLegFactoryImpl: Constructor
ServiceLegImpl - Class in org.goplanit.network.layer.service: A service leg connects two service nodes.
ServiceLegImpl(ServiceLegImpl) - Constructor for class org.goplanit.network.layer.service.ServiceLegImpl: Copy Constructor.
ServiceLegImpl(IdGroupingToken, ServiceNode, ServiceNode) - Constructor for class org.goplanit.network.layer.service.ServiceLegImpl: Constructor which injects link lengths directly
ServiceLegImpl(IdGroupingToken, ServiceNode, ServiceNode, List<Link>) - Constructor for class org.goplanit.network.layer.service.ServiceLegImpl: Constructor which injects link lengths directly
ServiceLegs - Interface in org.goplanit.utils.network.layer.service: Container around service legs with factory access
ServiceLegSegment - Interface in org.goplanit.utils.network.layer.service: Interface for directed ServiceLegSegment part of non-directional ServiceLeg.
ServiceLegSegmentFactory - Interface in org.goplanit.utils.network.layer.service: Factory interface for creating service leg segment instances
ServiceLegSegmentFactoryImpl - Class in org.goplanit.network.layer.service: Factory for creating service leg segments on service leg segment container
ServiceLegSegmentFactoryImpl(IdGroupingToken, GraphEntities<ServiceLegSegment>) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentFactoryImpl: Constructor
ServiceLegSegmentImpl - Class in org.goplanit.network.layer.service: A service leg segment implementation.
ServiceLegSegmentImpl(ServiceLegSegmentImpl) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentImpl: Copy constructor
ServiceLegSegmentImpl(IdGroupingToken, ServiceLeg, boolean) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentImpl: Constructor
ServiceLegSegments - Interface in org.goplanit.utils.network.layer.service: Container for service leg segments
ServiceLegSegmentsImpl - Class in org.goplanit.network.layer.service: Implementation of ServiceLegSegments container.
ServiceLegSegmentsImpl(ServiceLegSegmentsImpl) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentsImpl: Copy constructor
ServiceLegSegmentsImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentsImpl: Constructor
ServiceLegSegmentsImpl(IdGroupingToken, ServiceLegSegmentFactory) - Constructor for class org.goplanit.network.layer.service.ServiceLegSegmentsImpl: Constructor
ServiceLegsImpl - Class in org.goplanit.network.layer.service: Container class for managing service legs within a service network
ServiceLegsImpl(ServiceLegsImpl) - Constructor for class org.goplanit.network.layer.service.ServiceLegsImpl: Copy constructor
ServiceLegsImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.service.ServiceLegsImpl: Constructor
ServiceLegsImpl(IdGroupingToken, ServiceLegFactory) - Constructor for class org.goplanit.network.layer.service.ServiceLegsImpl: Constructor
ServiceNetwork - Class in org.goplanit.network: A service network is a network built on top of a topological (physical) transport network providing services leveraging this underlying network.
ServiceNetwork(IdGroupingToken, MacroscopicNetwork) - Constructor for class org.goplanit.network.ServiceNetwork: Constructor
ServiceNetworkLayer - Interface in org.goplanit.utils.network.layer: Service network layer consisting of service nodes, legs and leg segments on top of a parent network layer with physical entities.
ServiceNetworkLayerFactory - Interface in org.goplanit.utils.network.layers: Factory interface for creating service network layers
ServiceNetworkLayerFactoryImpl - Class in org.goplanit.network.layer: Factory for creating service network layer instances
ServiceNetworkLayerFactoryImpl(IdGroupingToken, ServiceNetworkLayersImpl) - Constructor for class org.goplanit.network.layer.ServiceNetworkLayerFactoryImpl: Constructor
ServiceNetworkLayerImpl - Class in org.goplanit.network.layer: A service network layer is built on top of a physical network (layer).
ServiceNetworkLayerImpl(ServiceNetworkLayerImpl) - Constructor for class org.goplanit.network.layer.ServiceNetworkLayerImpl: Copy constructor
ServiceNetworkLayerImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.ServiceNetworkLayerImpl: Constructor.
ServiceNetworkLayerImpl(IdGroupingToken, MacroscopicNetworkLayer) - Constructor for class org.goplanit.network.layer.ServiceNetworkLayerImpl: Constructor.
ServiceNetworkLayerImpl(IdGroupingToken, MacroscopicNetworkLayer, ServiceNodes, ServiceLegs, ServiceLegSegments) - Constructor for class org.goplanit.network.layer.ServiceNetworkLayerImpl: Constructor
ServiceNetworkLayers - Interface in org.goplanit.utils.network.layers: interface to manage service network layers, i.e., layers that contain service networks on top of other network layers
ServiceNetworkLayersImpl - Class in org.goplanit.network.layers: Implementation of container and factory to manage service network layers.
ServiceNetworkLayersImpl(ServiceNetworkLayersImpl) - Constructor for class org.goplanit.network.layers.ServiceNetworkLayersImpl: Copy constructor
ServiceNetworkLayersImpl(IdGroupingToken, MacroscopicNetwork) - Constructor for class org.goplanit.network.layers.ServiceNetworkLayersImpl: Constructor
ServiceNetworkReader - Interface in org.goplanit.converter.service: Interface to read a PLANit service network
serviceNetworks - Variable in class org.goplanit.project.CustomPlanItProject: The registered service networks
serviceNetworks - Variable in class org.goplanit.project.PlanItProjectInput: The registered service networks
ServiceNode - Interface in org.goplanit.utils.network.layer.service: Service node is a vertex but not all vertices are service nodes.
ServiceNodeFactory - Interface in org.goplanit.utils.network.layer.service: Factory interface for creating service node instances
ServiceNodeFactoryImpl - Class in org.goplanit.network.layer.service: Factory for creating nodes on nodes container
ServiceNodeFactoryImpl(IdGroupingToken, ServiceNodes) - Constructor for class org.goplanit.network.layer.service.ServiceNodeFactoryImpl: Constructor
ServiceNodeImpl - Class in org.goplanit.network.layer.service: A ServiceNode is used in a ServiceNetwork where it holds a reference to a DirectedNode of the ServiceNetworkLayer's underlying physical network layer.
ServiceNodeImpl(ServiceNodeImpl) - Constructor for class org.goplanit.network.layer.service.ServiceNodeImpl: Copy constructor
ServiceNodeImpl(IdGroupingToken, Node) - Constructor for class org.goplanit.network.layer.service.ServiceNodeImpl: Constructor
ServiceNodes - Interface in org.goplanit.utils.network.layer.service: Service node container and factory
ServiceNodesImpl - Class in org.goplanit.network.layer.service: ServiceNodes implementation.
ServiceNodesImpl(ServiceNodesImpl) - Constructor for class org.goplanit.network.layer.service.ServiceNodesImpl: Copy constructor
ServiceNodesImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.service.ServiceNodesImpl: Constructor
ServiceNodesImpl(IdGroupingToken, ServiceNodeFactory) - Constructor for class org.goplanit.network.layer.service.ServiceNodesImpl: Constructor
SET_AVERAGED - Static variable in class org.goplanit.gap.NormBasedGapConfigurator: delayed call to apply for setting averaged option on gap function
SET_DEMANDS - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_EPSILON - Static variable in class org.goplanit.gap.StopCriterionConfigurator
SET_GAP_FUNCTION - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_INFRASTRUCTURE_NETWORK - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_INITIAL_LINK_SEGMENT_COST - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_MAX_ITERATIONS - Static variable in class org.goplanit.gap.StopCriterionConfigurator
SET_NORM - Static variable in class org.goplanit.gap.NormBasedGapConfigurator: delayed call to apply for setting norm option on gap function
SET_OUTPUT_MANAGER - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_PHYSICAL_COST - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_VIRTUAL_COST - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
SET_ZONING - Static variable in class org.goplanit.assignment.TrafficAssignmentConfigurator
setAccessee(Object) - Method in interface org.goplanit.interactor.InteractorAccessor: Set the accessee to allow access
setAccessee(LinkInflowOutflowAccessee) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Set the accessee to allow access
setAccessee(LinkVolumeAccessee) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: we expect a link volume accessee to be provided by the environment.
setAccessee(T) - Method in interface org.goplanit.interactor.InteractorAccessor: Set the accessee to allow access
setAccessGroupProperties(Collection<AccessGroupProperties>) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Set the access properties, any pre-existing access properties for modes are overwritten by the given ones
setAccessGroupProperties(Collection<AccessGroupProperties>) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Set the access properties, any pre-existing access properties for modes are overwritten by the given ones
setAccessGroupProperties(AccessGroupProperties) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Set access properties for this link segment type, any modes with existing access properties are overwritten by the given properties.
setAccessGroupProperties(AccessGroupProperties) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Set access properties for this link segment type, any modes with existing access properties are overwritten by the given properties.
setAccessLinkSegment(LinkSegment) - Method in class org.goplanit.zoning.DirectedConnectoidImpl: Set the accessEdgeSegment
setAccessVertex(DirectedVertex) - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: Set the accessVertex
setActivateBushBased(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Set the flag indicating if bush based assignment is to be applied or not
setActivateDetailedLogging(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Set the flag indicating link storage constraints are active or not
setAllowedModes(String, boolean, List<String>) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: set the passed in modes as the only modes that are explicitly allowed access regardless of the mode category,
setAllowedModes(String, List<String>) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: set the passed in modes as the only modes that are explicitly allowed access and remove all categories
setAllSegmentCosts(Mode, double, int) - Method in class org.goplanit.cost.physical.initial.ManualInitialLinkSegmentCost: Sets a given cost for all link segments for a given mode
setAlwaysKeepLargestSubnetwork(boolean) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: indicate to keep the largest subnetwork always even when removing dangling subnetworks and the largest one does not fit the set criteria
setAveraged(boolean) - Method in class org.goplanit.gap.NormBasedGapConfigurator: Set the averaged property indicating to average the gap after computation or not
setAveraged(boolean) - Method in class org.goplanit.gap.NormBasedGapFunction
setBoundingBox(Number, Number, Number, Number) - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Set a square bounding box based on provided envelope
setBoundingBox(Number, Number, Number, Number) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set an additional (more restricting) square bounding box based on provided envelope
setBoundingBox(Envelope) - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Set a square bounding box based on provided envelope (which internally is converted to the bounding polygon that happens to be square)
setBoundingBox(Envelope) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set a square bounding box based on provided envelope (which internally is converted to the bounding polygon that happens to be square)
setBoundingPolygon(Polygon) - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Set a polygon based bounding box to restrict parsing to
setBoundingPolygon(Polygon) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set a polygon based bounding box to restrict parsing to
setBushBased(Boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
setBushes(Bush[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: The bushes to use when a loading update is requested
setCapacity(double) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Sets the capacity of this link
setCapacityLinkSegmentPcuHourLane(MacroscopicLinkSegment, double) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Set the capacity in pcu/h/lane to use for the Newell FD for a given link segment.
setCapacityLinkSegmentPcuHourLane(MacroscopicLinkSegment, double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramConfigurator: Set the capacity in pcu/h/lane to use for the Newell FD for a given link segment.
setCapacityLinkSegmentTypePcuHourLane(MacroscopicLinkSegmentType, double) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Set the capacity in pcu/h/lane to use for the Newell FD for a given link segment type.
setCapacityLinkSegmentTypePcuHourLane(MacroscopicLinkSegmentType, double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramConfigurator: Set the capacity in pcu/h/lane to use for the Newell FD for a given link segment type.
setCapacityPcuHour(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Change the capacity to the new value
setCapacityPcuHour(double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: For the Newell FD this means that all remains the same except for the congested wave speed to ensure the FD remains viable since the capacity is derived and not explicitly set.
setCapacityPeriod(CapacityPeriod) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setCentroid(Centroid) - Method in class org.goplanit.zoning.ZoneImpl: set the centroid for this zone.
setCharacteristicWaveSpeedKmHour(double) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Set the characteristic wave speed in km/h
setCommaSeparator(Character) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set separator
setConnectoidEdgeId(long) - Method in class org.goplanit.network.virtual.ConnectoidEdgeImpl: Set the connectoidEdgeId
setConnectoidSegmentId(long) - Method in class org.goplanit.network.virtual.ConnectoidSegmentImpl: Set connectoid segment id
setConnectoidSpeed(double) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: set the connectoid speed
setConnectoidSpeed(double) - Method in class org.goplanit.cost.virtual.SpeedVirtualCostConfigurator: set the connectoid speed
setCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.network.TopologicalLayerNetwork: set the coordinate reference system used for all layers
setCountry(String) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Set country name used on both zoning and network settings
setCountry(String) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set country name used
setCountry(String) - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: set the country to use on both network and zoning settings
setCountry(String) - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Set the country name to use
setCountry(String) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaults: set the country name
setCountry(String) - Method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsCategory: Set the country name that represents these defaults
setCountry(String) - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: update country
setCriticalSpeedKmH(Double) - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: set the critical speed in km/h
setCriticalSpeedKmH(Double) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: set the critical speed in km/h
setCsvDirectory(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Set the directory for CSV output files
setCsvDirectory(String) - Method in interface org.goplanit.output.formatter.CsvTextFileOutputFormatter: Sets the directory of the CSV output files for all output types
setCsvDirectory(String) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Sets the name of the CSAV output file directory
setCsvNameExtension(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Sets the extension of the CSV output file
setCsvNameExtension(String) - Method in interface org.goplanit.output.formatter.CsvTextFileOutputFormatter: Sets the extension of the CSV output file name for all output types
setCsvNameExtension(String) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Sets the extension of the CSV output file
setCsvNameRoot(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Set the root name of the CSV output file for all output types
setCsvNameRoot(String) - Method in interface org.goplanit.output.formatter.CsvTextFileOutputFormatter: Set the root name of the CSV output file for all output types
setCsvNameRoot(String) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Sets the root name of the CSV output file
setCurrentSegmentFlows(double[]) - Method in class org.goplanit.assignment.traditionalstatic.ModeData: set segment flows
setDecimalFormat(DecimalFormat) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set number of decimals used in writing coordinates
setDecimalFormat(DecimalFormat) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Set number of decimals used in writing coordinates
setDecimalSeparator(Character) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set separator
setDefaultDirectionalLanesByHighwayType(String, Integer) - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: Overwrite current default
setDefaultDirectionalRailwayTracks(Integer) - Method in class org.goplanit.osm.defaults.OsmLaneDefaults: Overwrite current default
setDefaultDwellTime(LocalTime) - Method in class org.goplanit.service.routed.RoutedTripScheduleImpl: Set default
setDefaultMaximumSpeed(double) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setDefaultParameters(double, double) - Method in class org.goplanit.cost.physical.BPRConfigurator: Set the default alpha and beta values
setDefaultParameters(double, double) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Set the default alpha and beta values
setDefaultParameters(Mode, double, double) - Method in class org.goplanit.cost.physical.BPRConfigurator: Set the default alpha and beta values for a mode
setDefaultParameters(Mode, double, double) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Set the default alpha and beta values for a mode
setDefaultParameters(MacroscopicLinkSegmentType, Mode, double, double) - Method in class org.goplanit.cost.physical.BPRConfigurator: Set the default alpha and beta values for a given link type and mode
setDefaultParameters(MacroscopicLinkSegmentType, Mode, double, double) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Set the default alpha and beta values for a given link type and mode
setDefaultsByCountry(OsmModeAccessDefaults) - Static method in class org.goplanit.osm.defaults.OsmModeAccessDefaultsByCountry: Set defaults for a specific county
setDefaultsByCountry(OsmSpeedLimitDefaults) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Register speed limits for a specific country
setDefaultWhenOsmHighwayTypeUnsupported(String) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: set the default to be used when we encounter an unsupported type.
setDemands(Demands) - Method in class org.goplanit.assignment.TrafficAssignment: Set the Demands object for the current assignment
setDemands(Demands) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Set the demands
setDemands(Demands) - Method in class org.goplanit.io.converter.demands.PlanitDemandsReader: Set the demands to populate
setDemandsToPopulate(Demands) - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings
setDensityAtZeroFlow(double) - Method in class org.goplanit.supply.fundamentaldiagram.LinearFundamentalDiagramBranch: Set the density at zero flow in Pcu/km
setDestination(DirectedVertex, double) - Method in class org.goplanit.assignment.ltm.sltm.consumer.InitialiseBushEdgeSegmentDemandConsumer: Update to next destination with accompanying demand.
setDestinationCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Set the destination Crs to use (if not set, network's native Crs will be used, unless the user has specified a specific country for which we have a more appropriate Crs registered)
setDestinationCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set the destination Crs to use (if not set, network's native Crs will be used, unless the user has specified a specific country for which we have a more appropriate Crs registered)
setDestinationCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: Explicitly set a particular crs for writing geometries for both zoning and network
setDestinationCoordinateReferenceSystem(CoordinateReferenceSystem) - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Explicitly set a particular crs for writing geometries
setDetailedLogging(Boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
setDirectedConnectoidId(long) - Method in class org.goplanit.zoning.DirectedConnectoidImpl: set the directed connectoid id
setDisableLinkStorageConstraints(boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Set the flag indicating link storage constraints are active or not
setDisableStorageConstraints(Boolean) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings
setDiscardDanglingNetworksAbove(int) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: allows you to set a maximum size for dangling subnetwork.
setDiscardDanglingNetworksBelow(int) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the minimum size an identified dangling network must have for it to NOT be removed when danlging networks are removed
setDownstreamVertex(DirectedVertex) - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Set another downstream vertex.
setDownstreamVertex(DirectedVertex) - Method in interface org.goplanit.utils.graph.EdgeSegment: Set another downstream vertex.
setEdgeSegmentAb(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: set edge segment from A to B
setEdgeSegmentBa(EdgeSegment) - Method in class org.goplanit.graph.directed.DirectedEdgeImpl: set edge segment from B to A
setEndNodeId(long) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the id of the end node
setEpsilon(double) - Method in class org.goplanit.gap.StopCriterion: Set the epsilon of this stopping criterion
setEpsilon(double) - Method in class org.goplanit.gap.StopCriterionConfigurator: Set the epsilon of this stopping criterion
setEventContentByIndex(int, Serializable) - Method in class org.goplanit.assignment.ltm.eltm.event.CumulativeEvent: set content entry on the event explicitly
setExternalId(String) - Method in class org.goplanit.component.PlanitComponent: set the external id
setExternalId(String) - Method in interface org.goplanit.utils.id.ExternalIdAble: set the external id
setExternalId(String) - Method in class org.goplanit.utils.id.ExternalIdAbleImpl: set the external id
setFactory(RoutedTripFactory<T>) - Method in class org.goplanit.service.routed.RoutedTripsImpl: The factory to use.
setFileName(String) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set the file name to use
setFixedConnectoidCost(double) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: set the fixed cost used for all relevant link segments
setFixedConnectoidCost(double) - Method in class org.goplanit.cost.virtual.FixedVirtualCostConfigurator: set the fixed cost used for all relevant link segments
setFrequencyPerHour(double) - Method in interface org.goplanit.service.routed.RoutedTripFrequency: Set the frequency per hour
setFrequencyPerHour(double) - Method in class org.goplanit.service.routed.RoutedTripFrequencyImpl: Set the frequency per hour
setFundamentalDiagram(FundamentalDiagramComponent) - Method in class org.goplanit.assignment.ltm.LtmAssignment: Set the fundamental diagram
setGapFunction(GapFunction) - Method in class org.goplanit.assignment.TrafficAssignment: Collect the gap function which is to be set by a derived class of TrafficAssignment via the initialiseDefaults() right after construction
setGenerateDetailedLinkGeometryFile(boolean) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Set the choice for whether or not a detailed geometry file for each link is created.
setGeometry(Geometry) - Method in interface org.goplanit.utils.zoning.Zone: set the geometry (outer border) of this zone, can be a polygon, but also a line string
setGeometry(Geometry) - Method in class org.goplanit.zoning.ZoneImpl: set the geometry (outer border) of this zone, can be a polygon, but also a line string
setGeometry(LineString) - Method in class org.goplanit.graph.EdgeImpl: set the geometry of this link as a line string
setGeometry(LineString) - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Not allowed, set geometry via underlying links instead
setGeometry(LineString) - Method in interface org.goplanit.utils.graph.Edge: set the geometry of this link as a line string
setGlobalHighwaySpeedLimitDefaults(String, double, double) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Set global defaults for highways
setGlobalRailwaySpeedLimitDefaults(String, double) - Static method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: Set global defaults for railways
setId(long) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: set the id on this link segment type
setId(long) - Method in class org.goplanit.utils.id.IdAbleImpl: set the id
setId(long) - Method in class org.goplanit.zoning.ConnectoidImpl: set the connectoid id
setId(long) - Method in class org.goplanit.zoning.ZoneImpl: set the zone's unique internal id across all zones
setIdGroupingToken(IdGroupingToken) - Method in interface org.goplanit.utils.id.ManagedIdEntityFactory: Each factory needs a token to allow all underlying factory methods to generated ids uniquely tied to the group token the entities belong to
setIdGroupingToken(IdGroupingToken) - Method in class org.goplanit.utils.id.ManagedIdEntityFactoryImpl: Each factory needs a token to allow all underlying factory methods to generated ids uniquely tied to the group token the entities belong to
setIdMapperType(IdMapperType) - Method in class org.goplanit.converter.BaseWriterImpl: set the way ids should be mapped
setIdMapperType(IdMapperType) - Method in interface org.goplanit.converter.ConverterWriter: set the way ids should be mapped
setIdMapperType(IdMapperType) - Method in interface org.goplanit.converter.MultiConverterWriter: set the way ids should be mapped
setIdMapperType(IdMapperType) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: set the way ids should be mapped
setIdMapperType(IdMapperType) - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriter: set the way ids should be mapped
setInfrastructureNetwork(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.assignment.TrafficAssignment: Set the physicalNetwork for the current assignment
setInfrastructureNetwork(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Set the network
setInitialLinkSegmentCost(InitialModesLinkSegmentCost) - Method in class org.goplanit.assignment.TrafficAssignment: Set the initial link segment cost that is mode agnostic and can be used as the fallback if no time period specific initial cost is registered
setInitialLinkSegmentCost(TimePeriod, InitialModesLinkSegmentCost) - Method in class org.goplanit.assignment.TrafficAssignment: Set the initial link segment cost for a specified time period on the assignment, otherwise revert to the general initial link segment cost (if any).
setInLinkSegmentProcessed(int) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Mark in-link segment as processed
setInputDirectory(String) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: set the input path directory used for both zoning and network settings
setInputDirectory(String) - Method in class org.goplanit.io.xml.util.PlanitXmlReaderSettings: Set the input path directory used
setInputFile(String) - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Set the input file to use, which is internally converted into a URL
setInputFile(String) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set the input file to use, which is internally converted into a URL
setInputSource(String) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set the input source to use, we attempt to extract a URL from the String directly here
setInputSource(URL) - Method in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: Set the inputSource to use including for both the network and public transport settings (both should use the same source)
setInputSource(URL) - Method in class org.goplanit.osm.converter.OsmReaderSettings: Set the input source to use
setIterationIndex(int) - Method in class org.goplanit.assignment.SimulationData: Set the current iteration index
setIterationOffset(int) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Set the offset to use
setKeepOsmNodeOutsideBoundingPolygon(Number) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: When a bounding polygon is set, some nodes might reside outside this bounding box but you want to make them available anyway for some reason.
setKeepOsmWaysOutsideBoundingPolygon(Number...) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: When a bounding polygon is set, some ways might partially be in and/or outside this bounding box.
setKeepOsmWaysOutsideBoundingPolygon(List<Number>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: When a bounding polygon is set, some ways might partially be in and/or outside this bounding box.
setLength(double) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the length of this link
setLength(Zone, double) - Method in interface org.goplanit.utils.zoning.Connectoid: Add an access zone and provide length to this connectoid
setLength(Zone, double) - Method in class org.goplanit.zoning.ConnectoidImpl: Add an access zone and provide length to this connectoid
setLengthKm(double) - Method in class org.goplanit.graph.EdgeImpl: set length of this edge in km
setLengthKm(double) - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Not allowed, set length via underlying links instead
setLengthKm(double) - Method in interface org.goplanit.utils.graph.Edge: set length of this edge in km
setLengthUnits(LengthUnits) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setLinkCost(double) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the cost for the current link
setLinkFlow(double) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the flow through this link
setLinkId(long) - Method in class org.goplanit.network.layer.physical.LinkImpl: Set the link id
setLinkOsmWayType(Link, String) - Static method in class org.goplanit.osm.converter.network.OsmNetworkHandlerHelper: set the osm way type
setLinkSegmentId(long) - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Set the link segment id
setLinkSegmentTravelTimePcuH(Mode, double[]) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Set the costs(travel time in hours per link segment) for a given mode supported by the loading of this data
setLinkSegmentType(MacroscopicLinkSegmentType) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentImpl: Set the link segment type this link segment adheres to
setLinkSegmentType(MacroscopicLinkSegmentType) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegment: Set the link segment type this link segment adheres to
setLogitModel(LogitChoiceModel) - Method in class org.goplanit.path.choice.StochasticPathChoice: set the chosen logit model
setMap(Map<K, V>) - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Replace the wrapped map
setMaximumDensityLinkSegmentPcuKmLane(MacroscopicLinkSegment, double) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Set the maximum density in pcu/km/lane to use for the Newell FD for a given link segment.
setMaximumDensityLinkSegmentPcuKmLane(MacroscopicLinkSegment, double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramConfigurator: Set the maximum density in pcu/km/lane to use for the Newell FD for a given link segment.
setMaximumDensityLinkSegmentTypePcuKmLane(MacroscopicLinkSegmentType, double) - Method in class org.goplanit.supply.fundamentaldiagram.FundamentalDiagramComponent: Set the maximum density in pcu/km/lane to use for the Newell FD for a given link segment type.
setMaximumDensityLinkSegmentTypePcuKmLane(MacroscopicLinkSegmentType, double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagramConfigurator: Set the maximum density in pcu/km/lane to use for the Newell FD for a given link segment type.
setMaximumDensityPcuKmHour(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Change the maximum density to the new value
setMaximumDensityPcuKmHour(double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Change the maximum density to the new value
setMaximumSpeedKmH(Double) - Method in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: set the maximum speed in km/h
setMaximumSpeedKmH(Double) - Method in interface org.goplanit.utils.network.layer.macroscopic.AccessGroupProperties: set the maximum speed in km/h
setMaximumSpeedKmHour(double) - Method in interface org.goplanit.supply.fundamentaldiagram.FundamentalDiagram: Change the maximum speed to the new value
setMaximumSpeedKmHour(double) - Method in class org.goplanit.supply.fundamentaldiagram.NewellFundamentalDiagram: Change the maximum speed to the new value
setMaxIterations(int) - Method in class org.goplanit.gap.StopCriterion: Set the maximum allowable number of iterations
setMaxIterations(int) - Method in class org.goplanit.gap.StopCriterionConfigurator: Set the maximum allowable number of iterations
setMinIterationThreshold(int) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Set the minimum iteration threshold to use before we can classify as non-improving
setMinPathState(boolean) - Method in interface org.goplanit.algorithms.shortestpath.MinMaxPathResult: Switch state to minimum path results
setMinPathState(boolean) - Method in class org.goplanit.algorithms.shortestpath.MinMaxPathResultImpl: Switch state to minimum path results
setModalLinkSegmentCosts(Mode, double[]) - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Set the link segment costs for a specified mode
setModeExternalIdsBasedOnMappedOsmModes() - Method in class org.goplanit.osm.converter.network.OsmWaySettings: set osmModeId's to planit external id (accounting for the possibility multiple osm modes are mapped to the same planit mode).
setModeToLayer(Mode, String) - Method in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: set mode to a layer
setMotorisationType(MotorisationModeType) - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl: set the motorisation type
setName(String) - Method in class org.goplanit.graph.EdgeImpl: set the name of the edge
setName(String) - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl: Set the name of this macroscopic link segment type
setName(String) - Method in class org.goplanit.network.layer.physical.NodeImpl: set the name of the node
setName(String) - Method in interface org.goplanit.service.routed.RoutedService: Name of the service, can be a number.
setName(String) - Method in class org.goplanit.service.routed.RoutedServiceImpl: Name of the service, can be a number.
setName(String) - Method in interface org.goplanit.utils.graph.Edge: set the name of the edge
setName(String) - Method in interface org.goplanit.utils.network.layer.macroscopic.MacroscopicLinkSegmentType: Set the name of this macroscopic link segment type
setName(String) - Method in interface org.goplanit.utils.network.layer.physical.Node: set the name of the node
setName(String) - Method in interface org.goplanit.utils.zoning.Centroid: Set the name of the centroid
setName(String) - Method in interface org.goplanit.utils.zoning.Connectoid: Set the name of the connectoid
setName(String) - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: set Name of the group
setName(String) - Method in interface org.goplanit.utils.zoning.Zone: Name of the zone
setName(String) - Method in class org.goplanit.zoning.CentroidImpl: Set the name of the centroid
setName(String) - Method in class org.goplanit.zoning.ConnectoidImpl: Set the name of the connectoid
setName(String) - Method in class org.goplanit.zoning.TransferZoneGroupImpl: set Name of the group
setName(String) - Method in class org.goplanit.zoning.ZoneImpl: Name of the zone
setNameDescription(String) - Method in interface org.goplanit.service.routed.RoutedService: Description of the name of the service, usually a short elaboration in addition to the name (number), for example for a bus the name could be 370 and the nameDescription "Balmain to Coogee"
setNameDescription(String) - Method in class org.goplanit.service.routed.RoutedServiceImpl: Description of the name of the service, usually a short elaboration in addition to the name (number), for example for a bus the name could be 370 and the nameDescription "Balmain to Coogee"
setNetwork(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.io.converter.network.PlanitNetworkReader: Place network to populate
setNetwork(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Set the network to utilise
setNetworkDataForZoningReader(OsmNetworkToZoningReaderData) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: allow one to set the network data required for parsing osm zoning data on the zoning reader
setNetworkFileColumns(Map<NetworkFileColumnType, Integer>) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setNetworkLayerLinks(List<Link>) - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Set the network layer link that make up this leg
setNetworkLayerNode(Node) - Method in class org.goplanit.network.layer.service.ServiceNodeImpl: Set the network layer node this service node refers to
setNetworkToPopulate(MacroscopicNetwork) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setNodeAccessDownstream(boolean) - Method in interface org.goplanit.utils.zoning.DirectedConnectoid: set if the node access is downstream or not
setNodeAccessDownstream(boolean) - Method in class org.goplanit.zoning.DirectedConnectoidImpl: set if the node access is downstream or not
setNodeId(long) - Method in class org.goplanit.network.layer.physical.NodeImpl: set the node id on this node
setNodeModel(NodeModelComponent) - Method in class org.goplanit.assignment.ltm.LtmAssignment: The node model to use
setNorm(int) - Method in class org.goplanit.gap.NormBasedGapConfigurator: Set the norm property indicating what norm to apply when computing the gap
setNorm(int) - Method in class org.goplanit.gap.NormBasedGapFunction
setNtCategoryFunction(Function<MacroscopicLinkSegment, String>) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Allow the user to provide their own function on how to populate the nt_category field of a MATSIM link based on the link segment that is provided to it
setNtTypeFunction(Function<MacroscopicLinkSegment, String>) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Allow the user to provide their own function on how to populate the nt_type field of a MATSIM link based on the link segment that is provided to it
setNumberOfLanes(int) - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: Set the number of lanes
setNumberOfLanes(int) - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: Set the number of lanes
setOdDemands(OdDemands) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: set od demand used
setOdPathMatrix(OdPathMatrix) - Method in class org.goplanit.path.choice.StochasticPathChoice: Register a fixed od path set to use in the form of an ODPathMatrix
setOdPathMatrix(OdPathMatrix) - Method in class org.goplanit.path.choice.StochasticPathChoiceConfigurator: Register a fixed od path set to use in the form of an ODPathMatrix
setOdZoneId(long) - Method in class org.goplanit.zoning.OdZoneImpl: Set OD Zone Id
setOfActivatedTypes() - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: create a copy of the currently supported way types in set form
setOfDeactivatedTypes() - Method in class org.goplanit.osm.defaults.OsmInfrastructureConfiguration: create a copy of the currently unsupported way types in set form
setOsmMode2PlanitModeMapping(String, Mode) - Method in class org.goplanit.osm.converter.network.OsmWaySettings: Add/overwrite a mapping from OSM mode to PLANit mode.
setOsmRailMode2PlanitModeMapping(String, Mode) - Method in class org.goplanit.osm.converter.network.OsmRailwaySettings: add/overwrite a mapping from OSM rail mode to PLANit mode.
setOsmRoadMode2PlanitModeMapping(String, Mode) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: add/overwrite a mapping from OSM road mode to PLANit mode.
setOutputDirectory(String) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: Set the outputPathDirectory used on both zoning and network settings
setOutputDirectory(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Set the common directory
setOutputDirectory(String) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set the outputDirectory used
setOutputDirectory(String) - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: set the output directory to use on both network and zoning settings
setOutputDirectory(String) - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Set the output directory to use
setOutputFileName(String) - Method in class org.goplanit.matsim.util.PlanitMatsimWriterSettings: Set the output file name to use
setOutputManager(OutputManager) - Method in class org.goplanit.assignment.TrafficAssignment: Set the output manager which holds all the configuration options regarding this assignment
setOutputManager(OutputManager) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Set the output manager
setParameters(MacroscopicLinkSegment, Mode, double, double) - Method in class org.goplanit.cost.physical.BPRConfigurator: Set the alpha and beta values for a given link segment and mode
setParameters(MacroscopicLinkSegment, Mode, double, double) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Set the alpha and beta values for a given link segment and mode
setParent(DirectedEdge) - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Set the parent edge
setParent(DirectedEdge) - Method in interface org.goplanit.utils.graph.EdgeSegment: Set the parent edge
setParentNetworkLayer(MacroscopicNetworkLayer) - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: The parent network layer this service network layer is to be build upon
setParentzone(Zone) - Method in class org.goplanit.zoning.CentroidImpl: Set the parent zone
setPasManager(PasManager) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: The PasManager to use when we must initialise the tracked network nodes (namely all nodes that are part of a PAS, since we need to know the network flow that passes through them)
setPathChoice(PathChoice) - Method in class org.goplanit.assignment.ltm.LtmAssignment: The path choice model to use
setPathIdentificationType(PathOutputIdentificationType) - Method in class org.goplanit.output.configuration.PathOutputTypeConfiguration: Set the path id type
setPersistOnlyFinalIteration(boolean) - Method in class org.goplanit.output.configuration.OutputConfiguration: Set whether only the final iteration will be recorded (default is true)
setPersistZeroFlow(boolean) - Method in class org.goplanit.output.configuration.OutputConfiguration: Set whether links and paths with zero flow should be record (default is false)
setPhysicalCost(AbstractPhysicalCost) - Method in class org.goplanit.assignment.TrafficAssignment: Set the physical cost where in case the cost is an InteractorAccessor will trigger an event to get access to the required data via requesting an InteractorAccessee
setPhysicalSpeedLimitKmH(double) - Method in class org.goplanit.network.layer.physical.LinkSegmentImpl: This is the maximum speed that is physically present and a driver can observe from the signs on the road
setPhysicalSpeedLimitKmH(double) - Method in interface org.goplanit.utils.network.layer.physical.LinkSegment: This is the maximum speed that is physically present and a driver can observe from the signs on the road (km/h)
setPlanitInfrastructureLayerConfiguration(MacroscopicNetworkLayerConfigurator) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: provide a new configuration other than the one provided by default
setPlanitNamespacePrefixes(Marshaller) - Static method in class org.goplanit.io.xml.util.JAXBUtils: Let any marshaller use the PLANit preferred prefixes for namespaces that it uses.
setPosition(Point) - Method in class org.goplanit.graph.VertexImpl: #Set the center point geometry for a vertex
setPosition(Point) - Method in class org.goplanit.network.layer.service.ServiceNodeImpl
setPosition(Point) - Method in interface org.goplanit.utils.graph.Vertex: Set the center point geometry for a vertex
setPresenceCondition(GtfsFileConditions) - Method in class org.goplanit.gtfs.reader.GtfsFileReaderBase: Explicitly indicate the expectations regarding the presence of this file.
setReferenceNetwork(MacroscopicNetwork) - Method in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Set reference network to use
setReferenceNetwork(MacroscopicNetwork) - Method in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: Set the reference network to use when mapping zoning entities to network entities
setReferenceNetwork(MacroscopicNetwork) - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings: Reference network for the demands
setReferenceNetwork(MacroscopicNetwork) - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings: Reference network for the zoning
setReferenceNetwork(PlanitOsmNetwork) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: set the reference network to use
setReferenceZoning(Zoning) - Method in class org.goplanit.io.converter.demands.PlanitDemandsReaderSettings: Set reference zoning to use
setReferenceZoning(Zoning) - Method in class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings
setRemoveDanglingSubnetworks(boolean) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Indicate whether to remove dangling subnetworks or not
setRemoveDanglingTransferZoneGroups(boolean) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: indicate whether to remove dangling transfer zone groups or not
setRemoveDanglingZones(boolean) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: indicate whether to remove dangling zones or not
setSegmentCost(Mode, long, double) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: same as InitialLinkSegmentCost.setSegmentCost(Mode, MacroscopicLinkSegment, double) only based on link segment's id
setSegmentCost(Mode, long, double) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Sets the initial cost for each link segment and mode
setSegmentCost(Mode, MacroscopicLinkSegment, double) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Set the initial cost for a specified mode and link segment
setSegmentCost(Mode, MacroscopicLinkSegment, double) - Method in class org.goplanit.cost.physical.initial.InitialModesLinkSegmentCost: Sets the initial cost for each link segment and mode
setSegmentCost(Mode, MacroscopicLinkSegment, double) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: Set the initial cost for a specified mode and link segment
setSegmentCost(TimePeriod, Mode, MacroscopicLinkSegment, double) - Method in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Set the initial cost for a specified mode and link segment
setSegmentCost(TimePeriod, Mode, MacroscopicLinkSegment, double) - Method in class org.goplanit.cost.physical.initial.InitialPhysicalCost: Set the initial cost for a specified mode and link segment
setServiceDescription(String) - Method in interface org.goplanit.service.routed.RoutedService: Description of the service, longer (if at all) and contextual not meant for end user in reality
setServiceDescription(String) - Method in class org.goplanit.service.routed.RoutedServiceImpl: Description of the service, longer (if at all) and contextual not meant for end user in reality
setSmoothing(Smoothing) - Method in class org.goplanit.assignment.TrafficAssignment: Set the Smoothing object for the current assignment
setSourceCRS(CoordinateReferenceSystem) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: Override source CRS
setSpeed(double) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the travel speed for this link
setSpeedLimitDefault(String, double) - Method in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: Set a speed default for a given type
setSpeedLimitDefaultsBasedOnUrbanArea(boolean) - Method in class org.goplanit.osm.converter.network.OsmHighwaySettings: set state of flag indicating to use urban or non-urban default speed limits when speed limit information is missing
setSpeedUnits(SpeedUnits) - Method in class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
setStartNodeId(long) - Method in class org.goplanit.utils.test.LinkSegmentExpectedResultsDto: Set the id of the end node
setStationToParallelTracksSearchRadiusMeters(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Set the maximum search radius used when trying to find parallel lines (tracks) for stand-alone stations
setStationToWaitingAreaSearchRadiusMeters(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Set the maximum search radius used when trying to map stations to platforms on the networks, when no explicit relation is made known by OSM
setStopToWaitingAreaSearchRadiusMeters(Number) - Method in class org.goplanit.osm.converter.zoning.OsmPublicTransportReaderSettings: Set the maximum search radius used when trying to map stops/platforms to stop positions on the networks, when no explicit relation is made known by OSM
setTimePeriod(TimePeriod) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Active time period
settings - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: user settings used regarding how to run the loading
settings - Variable in class org.goplanit.io.converter.demands.PlanitDemandsReader: settings for the zoning reader
settings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: intermodal writer settings to use
settings - Variable in class org.goplanit.io.converter.zoning.PlanitZoningReader: settings for the zoning reader
settings - Variable in class org.goplanit.matsim.converter.MatsimIntermodalWriter: Intermodal settings to use
settings - Variable in class org.goplanit.matsim.converter.MatsimNetworkWriter: MATSIM writer settings
setTrackType(TrackModeType) - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl: set the track type to use
setTransferZoneId(long) - Method in class org.goplanit.zoning.TransferZoneImpl: Set transfer zone Id
setTupleSeparator(Character) - Method in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: Set separator
setType(ConnectoidType) - Method in interface org.goplanit.utils.zoning.Connectoid: Set the type of the connectoid
setType(ConnectoidType) - Method in class org.goplanit.zoning.ConnectoidImpl: Set the type of the connectoid
setType(TransferZoneType) - Method in interface org.goplanit.utils.zoning.TransferZone: set the type of this transfer zone
setType(TransferZoneType) - Method in class org.goplanit.zoning.TransferZoneImpl: set the type of this transfer zone
setTypeFunction(Function<MacroscopicLinkSegment, String>) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriterSettings: Allow the user to provide their own function on how to populate the type field of a MATSIM link based on the link segment that is provided to it
setUndirectedConnectoidId(long) - Method in class org.goplanit.zoning.UndirectedConnectoidImpl: Set the undirected connectoid id
setUnitOverride(Unit) - Method in class org.goplanit.output.property.OutputProperty: set the units to use for overriding the defaults
setUpstreamVertex(DirectedVertex) - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: Set another upstream vertex.
setUpstreamVertex(DirectedVertex) - Method in interface org.goplanit.utils.graph.EdgeSegment: Set another upstream vertex.
setUseOfType(UseOfModeType) - Method in class org.goplanit.mode.UsabilityModeFeaturesImpl: set the use of type
setValue(Zone, Zone, T) - Method in interface org.goplanit.utils.od.OdData: Sets the value for a specified origin and destination
setValue(Zone, Zone, T) - Method in class org.goplanit.utils.od.OdHashedImpl: Sets the value for a specified origin and destination
setValue(Zone, Zone, T) - Method in class org.goplanit.utils.od.OdNonPrimitiveMatrix: Sets the value for a specified origin and destination
setValue(Zone, Zone, T) - Method in class org.goplanit.utils.od.OdPrimitiveMatrix: Sets the value for a specified origin and destination
setVehicularType(VehicularModeType) - Method in class org.goplanit.mode.PhysicalModeFeaturesImpl: set the vehicular type
setVertexA(Vertex) - Method in class org.goplanit.graph.EdgeImpl: set vertex A
setVertexB(Vertex) - Method in class org.goplanit.graph.EdgeImpl: set vertex B
setVirtualCost(AbstractVirtualCost) - Method in class org.goplanit.assignment.TrafficAssignment: Set the virtual cost where in case the cost is an InteractorAccessor will trigger an event to get access to the required data via requesting an InteractorAccessee
setXmlDirectory(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Set the output directory for XML output files
setXmlDirectory(String) - Method in interface org.goplanit.output.formatter.XmlTextFileOutputFormatter: Sets the directory of the XML output files for all output types
setXmlFileExtension(String) - Method in class org.goplanit.io.xml.util.PlanitXmlReaderSettings: the xml extension used to check for within path directory used
setXmlFileNamePerOutputType(OutputType, String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Set the name of an XML output file for a specified output type
setXmlFileNamePerOutputType(OutputType, String) - Method in interface org.goplanit.output.formatter.XmlTextFileOutputFormatter: Set the name of an XML output file for a specified output type
setXmlId(String) - Method in class org.goplanit.component.PlanitComponent: set the external id
setXmlId(String) - Method in interface org.goplanit.utils.id.ExternalIdAble: set the external id
setXmlId(String) - Method in class org.goplanit.utils.id.ExternalIdAbleImpl: set the external id
setXmlNameExtension(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Sets the extension of the XML output file
setXmlNameExtension(String) - Method in interface org.goplanit.output.formatter.XmlTextFileOutputFormatter: Sets the extension of the XML output file name for all output types
setXmlNameRoot(String) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Sets the root name of the XML output file
setXmlNameRoot(String) - Method in interface org.goplanit.output.formatter.XmlTextFileOutputFormatter: Set the root name of the XML output file for all output types
setXmlRootElement(T) - Method in class org.goplanit.io.xml.util.PlanitXmlJaxbParser: Set the root element of this reader
setZoning(Zoning) - Method in class org.goplanit.assignment.TrafficAssignment: Set the zoning object for the current assignment
setZoning(Zoning) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Set the zoning
setZoning(Zoning) - Method in class org.goplanit.io.converter.zoning.PlanitZoningReader: Set the zoning to populate
setZoningToPopulate(Zoning) - Method in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings
SEYCHELLES - Static variable in class org.goplanit.utils.locale.CountryNames
SHAPE - org.goplanit.gtfs.enums.GtfsObjectType
SHAPE_DIST_TRAVELED - org.goplanit.gtfs.enums.GtfsKeyType
SHAPE_ID - org.goplanit.gtfs.enums.GtfsKeyType
SHAPE_PT_LAT - org.goplanit.gtfs.enums.GtfsKeyType
SHAPE_PT_LON - org.goplanit.gtfs.enums.GtfsKeyType
SHAPE_PT_SEQUENCE - org.goplanit.gtfs.enums.GtfsKeyType
SHAPES - org.goplanit.gtfs.enums.GtfsFileType
SHARE_BUSWAY - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
SHARE_TAXI - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: share taxi, i.e., demand responsive small bus
SHARED_LANE - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
SHARED_LANE - Static variable in class org.goplanit.osm.tags.OsmLaneTags: e.g.
ShortestPathResult - Interface in org.goplanit.algorithms.shortestpath: Interfaces that defines how to access results of a shortest path execution allowing one to extract paths or cost information
ShortestPathResultImpl - Class in org.goplanit.algorithms.shortestpath: Class that stores the result of a shortest path execution allowing one to extract paths or cost information Note that we must traverse a path from an origin to a destination in reversed order to extract the path
ShortestPathResultImpl(double[], EdgeSegment[]) - Constructor for class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: Constructor only to be used by shortest path algorithms
SHOULDER - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
shouldOsmRelationOuterRoleOsmWayBeKept(OsmWay) - Method in class org.goplanit.osm.converter.zoning.OsmZoningReaderOsmData: verify if the passed in OSM way should be kept (even if it is not converted to a PLANit link based on its current tags
SIDEPATH - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
SIDEWALK - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: can be used as key or value, e.g., footway=sidewalk, or sidewalk=x
SIGNAL_BOX - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
SIGNPOSTED_AS - org.goplanit.gtfs.enums.GtfsKeyType
silenceHsqlLogging() - Static method in class org.goplanit.utils.geo.PlanitCrsUtils: make sure we silence the Hsql logging that is used by CRS to collect crs for different countries.
SimpleUnit - Class in org.goplanit.utils.unit: Simple unit that comprises a single unit
SimpleUnit(UnitType) - Constructor for class org.goplanit.utils.unit.SimpleUnit: Constructor
SIMULATION - org.goplanit.output.enums.OutputType
SimulationData - Class in org.goplanit.assignment: General simulation data that only are available during simulation
SimulationData() - Constructor for class org.goplanit.assignment.SimulationData: Constructor
SimulationData(SimulationData) - Constructor for class org.goplanit.assignment.SimulationData: Copy constructor
SINGAPORE - Static variable in class org.goplanit.utils.locale.CountryNames
size() - Method in class org.goplanit.path.DirectedPathImpl: The size of the path is given by the number of edge segments it holds
size() - Method in class org.goplanit.project.ProjectAssignmentBuilders: Get the number of traffic assignment
size() - Method in interface org.goplanit.utils.path.DirectedPath: The size of the path is given by the number of edge segments it holds
size() - Method in interface org.goplanit.utils.wrapper.MapWrapper: The number of registered entries
size() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: The number of registered entries
size() - Method in interface org.goplanit.utils.zoning.TransferZoneGroup: Number of registered transfer zones
size() - Method in class org.goplanit.zoning.TransferZoneGroupImpl: Number of registered transfer zones
sizeOfEntryEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Collect the number of entry edge segments of this vertex
sizeOfExitEdgeSegments() - Method in interface org.goplanit.utils.graph.directed.DirectedVertex: Collect the number of exit edge segments of this vertex
skipOsmNode(OsmNode) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: skip osm node when marked for exclusion in settings
skipOsmPtEntity(OsmRelationMember) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: Skip SOM relation member when marked for exclusion in settings
skipOsmWay(OsmWay) - Method in class org.goplanit.osm.converter.zoning.handler.OsmZoningHandlerBase: skip osm way when marked for exclusion in settings
SLTM - Static variable in class org.goplanit.assignment.TrafficAssignment: short hand to choose sLTM as assignment type
SMALL_STATION - org.goplanit.utils.zoning.TransferZoneType
Smoothing - Class in org.goplanit.sdinteraction.smoothing: Smoothing class to smooth data, such as path flows or other types of flows or traffic data between iterations
Smoothing(Smoothing) - Constructor for class org.goplanit.sdinteraction.smoothing.Smoothing: Constructor
Smoothing(IdGroupingToken) - Constructor for class org.goplanit.sdinteraction.smoothing.Smoothing: Base constructor
SmoothingConfigurator<T extends Smoothing> - Class in org.goplanit.sdinteraction.smoothing: Base class for all smoothing configurator implementations
SmoothingConfigurator(Class<T>) - Constructor for class org.goplanit.sdinteraction.smoothing.SmoothingConfigurator: Constructor
SmoothingConfiguratorFactory - Class in org.goplanit.sdinteraction.smoothing: factory for the smoothing configurator types supported directory by PLANit
SmoothingConfiguratorFactory() - Constructor for class org.goplanit.sdinteraction.smoothing.SmoothingConfiguratorFactory
SOlOMON_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
solutionScheme - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: track the approach of how the solution scheme is applied based on this type
SOUNTH_AFRICA - Static variable in class org.goplanit.utils.locale.CountryNames
sourceCRS - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the crs of the OSM source
sourceIdTrackerMap - Variable in class org.goplanit.converter.BaseReaderImpl: track PLANit entities by something else than their internal id via this map
SPACE - Static variable in class org.goplanit.utils.misc.CharacterUtils: a space ' '
SPEED - Static variable in interface org.goplanit.cost.virtual.VirtualCost: short hand for configuring speed based virtual cost instance
SPEED_LIMIT_PATTERN - Static variable in class org.goplanit.osm.util.PlanitOsmUtils: regular expression pattern([^0-9]*)([0-9]*\\.?[0-9]+).*(km/h|kmh|kph|mph|knots)?.* used to extract decimal values and unit (if any) where the decimal value is in group two and the unit in group 3 (indicated by second section of round brackets)
SpeedConnectoidTravelTimeCost - Class in org.goplanit.cost.virtual: Class to calculate the connectoid travel time using connectoid speed
SpeedConnectoidTravelTimeCost(SpeedConnectoidTravelTimeCost) - Constructor for class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Copy constructor
SpeedConnectoidTravelTimeCost(IdGroupingToken) - Constructor for class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Constructor
speedLimitConfiguration - Variable in class org.goplanit.osm.converter.network.OsmNetworkReaderSettings: the default speed limits used in case no explicit information is available on the osmway's tags
speedLimitDefaults - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsCategory: store osmway defaults in this map
speedLimitDefaultsBasedOnUrbanArea - Variable in class org.goplanit.osm.converter.network.OsmHighwaySettings: when speed limit information is missing, use predefined speed limits for highway types mapped to urban area speed limits (or non-urban), default is true
speedLimitDefaultsByCountryCode - Static variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaultsByCountry: store all defaults per country by ISO2 code
SpeedUnits - Enum in org.goplanit.tntp.enums
SpeedVirtualCostConfigurator - Class in org.goplanit.cost.virtual: Configurator for SpeedConnectoidTravelTimeCost implementation
SpeedVirtualCostConfigurator() - Constructor for class org.goplanit.cost.virtual.SpeedVirtualCostConfigurator: Constructor
splitByAnythingExceptAlphaNumeric(String) - Static method in class org.goplanit.utils.misc.StringUtils: split string by anything but alpha numeric characters, i.e., a-zA-Z0-9
splitLineString(LineString, LinearLocation) - Static method in class org.goplanit.utils.geo.PlanitJtsUtils: split a line string into two line strings at a given location along the original geometry.
splittingRateData - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: Splitting rate data to use
splittingRateData - Variable in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: variables tracked for splitting rate update step
SplittingRateData - Interface in org.goplanit.assignment.ltm.sltm.loading: Interface for the different implementations that track splitting rates during sLTM network loading.
SplittingRateDataComplete - Class in org.goplanit.assignment.ltm.sltm.loading: Store the splitting rates used during sLTM loading updates (Step 1 and 5).
SplittingRateDataComplete(long) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataComplete: Constructor
SplittingRateDataPartial - Class in org.goplanit.assignment.ltm.sltm.loading: Store the splitting rates used during sLTM loading updates (Step 1 and 5).
SplittingRateDataPartial(int) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.SplittingRateDataPartial: Constructor
SRI_LANKA - Static variable in class org.goplanit.utils.locale.CountryNames
SRS - org.goplanit.utils.unit.UnitGroup
SRS - org.goplanit.utils.unit.UnitType
SRS - Static variable in interface org.goplanit.utils.unit.Unit: predefined SRS SRSUnit
SRSNAME - org.goplanit.output.enums.DataType
SrsUnit - Class in org.goplanit.utils.unit: Unit class for all spatial reference system related units
SrsUnit() - Constructor for class org.goplanit.utils.unit.SrsUnit: Constructor
StackWalkerUtil - Class in org.goplanit.utils.reflection: Utils class warpping the Stackwalker API functionality in easy to use method calls.
StackWalkerUtil() - Constructor for class org.goplanit.utils.reflection.StackWalkerUtil
STAIR_COUNT - org.goplanit.gtfs.enums.GtfsKeyType
START_DATE - org.goplanit.gtfs.enums.GtfsKeyType
START_TIME - org.goplanit.gtfs.enums.GtfsKeyType
startXmlDocument(XMLStreamWriter, String) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: Start XML document
StaticLtm - Class in org.goplanit.assignment.ltm.sltm: Static Link Transmission Model implementation (sLTM) for network loading based on solution method presented in Raadsen and Bliemer (2021) General solution scheme for the Static Link Transmission Model .
StaticLtm(StaticLtm) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtm: Copy Constructor
StaticLtm(IdGroupingToken) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtm: Constructor
StaticLtmAssignmentStrategy - Class in org.goplanit.assignment.ltm.sltm: Base class for dealing with different assignment solution methods within sLTM.
StaticLtmAssignmentStrategy(IdGroupingToken, long, TransportModelNetwork, StaticLtmSettings, TrafficAssignmentComponentAccessee) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Constructor
StaticLtmBushStrategy - Class in org.goplanit.assignment.ltm.sltm: Implementation to support a bush absed solution for sLTM
StaticLtmBushStrategy(IdGroupingToken, long, TransportModelNetwork, StaticLtmSettings, TrafficAssignmentComponentAccessee) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmBushStrategy: Constructor
StaticLtmConfigurator - Class in org.goplanit.assignment.ltm.sltm: Configurator for sLTM.
StaticLtmConfigurator() - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmConfigurator: Constructor
StaticLtmLinkOutputTypeAdapter - Class in org.goplanit.assignment.ltm.sltm: Adapter providing access to the data of the StaticLtm class relevant for link outputs without exposing the internals of the traffic assignment class itself
StaticLtmLinkOutputTypeAdapter(OutputType, TrafficAssignment) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmLinkOutputTypeAdapter: Constructor
StaticLtmLoadingBush - Class in org.goplanit.assignment.ltm.sltm.loading: The bush based network loading scheme for sLTM
StaticLtmLoadingBush(IdGroupingToken, long, StaticLtmSettings) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingBush: Constructor
StaticLtmLoadingPath - Class in org.goplanit.assignment.ltm.sltm.loading: The path based network loading scheme for sLTM
StaticLtmLoadingPath(IdGroupingToken, long, StaticLtmSettings) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingPath: constructor
StaticLtmLoadingScheme - Enum in org.goplanit.assignment.ltm.sltm.loading: Defines the different types of solution scheme variations that exist and can be applied (progressively) during an sLTM network loading approach
StaticLtmNetworkLoading - Class in org.goplanit.assignment.ltm.sltm.loading: Class exposing the various sLTM network loading solution method components of sLTM (not considering path choice, this is assumed to be given).
StaticLtmNetworkLoading(IdGroupingToken, long, StaticLtmSettings) - Constructor for class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Constructor
StaticLtmNetworkLoadingConvergenceAnalyser - Class in org.goplanit.assignment.ltm.sltm.loading: Analyser that based on various inputs such as the iteration and previous gaps determines if the loading is converging or not using its configurable criteria
StaticLtmNetworkLoadingConvergenceAnalyser() - Constructor for class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoadingConvergenceAnalyser: Default constructor
StaticLtmPathStrategy - Class in org.goplanit.assignment.ltm.sltm: Implementation to deal with a path based sLTM implementation
StaticLtmPathStrategy(IdGroupingToken, long, TransportModelNetwork, StaticLtmSettings, TrafficAssignmentComponentAccessee) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmPathStrategy: Constructor
StaticLtmSettings - Class in org.goplanit.assignment.ltm.sltm: POJO Settings regarding the execution of the StaticLTM network loading instance it is used on
StaticLtmSettings() - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmSettings: Constructor
StaticLtmSettings(StaticLtmSettings) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmSettings: Copy constructor
StaticLtmSimulationData - Class in org.goplanit.assignment.ltm.sltm: Class to hold variables specific to running an sLTM assignment
StaticLtmSimulationData(StaticLtmSimulationData) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Copy Constructor
StaticLtmSimulationData(TimePeriod, Collection<Mode>, long) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmSimulationData: Constructor
StaticLtmTrafficAssignmentBuilder - Class in org.goplanit.assignment.ltm.sltm: The sLTM traffic assignment builder.
StaticLtmTrafficAssignmentBuilder(IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.assignment.ltm.sltm.StaticLtmTrafficAssignmentBuilder: Constructor
StaticTrafficAssignment - Class in org.goplanit.assignment: A static traffic assignment class with some commonalities implemented shared across static assignment implementations
StaticTrafficAssignment(StaticTrafficAssignment) - Constructor for class org.goplanit.assignment.StaticTrafficAssignment: Copy Constructor
StaticTrafficAssignment(IdGroupingToken) - Constructor for class org.goplanit.assignment.StaticTrafficAssignment: Constructor
STATION - org.goplanit.utils.zoning.TransferZoneType
STATION - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a station is a separate (disconnected) area to indicate a public transport station
STATION - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: A station is an area designed to access public transport, identical to Ptv1 tag value
STEADY_STATE - Static variable in interface org.goplanit.cost.physical.PhysicalCost: short hand for configuring physical cost compatible with steady state assignment methods, e.g., static methods with both inflow and outflow rates that can differ such as sLTM.
SteadyStateTravelTimeConfigurator - Class in org.goplanit.cost.physical: Configurator for SteadyStateTravelTimeCost implementation
SteadyStateTravelTimeConfigurator() - Constructor for class org.goplanit.cost.physical.SteadyStateTravelTimeConfigurator: Constructor
SteadyStateTravelTimeCost - Class in org.goplanit.cost.physical: Cost computation for travel times based on the work of Raadsen and Bliemer (2019), Steady-state link travel time methods: Formulation, derivation, classification, and unification.
SteadyStateTravelTimeCost(SteadyStateTravelTimeCost) - Constructor for class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Copy Constructor
SteadyStateTravelTimeCost(IdGroupingToken) - Constructor for class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Constructor
stepFiveCheckNetworkLoadingConvergence(int) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: 1.
stepFourOutflowReceivingFlowUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: 1.
stepOneSplittingRatesUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Perform splitting rate update (before sending flow update) of the network loading: 1.
STEPS - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
STEPS_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
stepSize - Variable in class org.goplanit.sdinteraction.smoothing.MSASmoothing: Step size
stepThreeSplittingRateUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Perform splitting rate update (before receiving flow update) of the network loading: 1.
stepTwoInflowSendingFlowUpdate() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Perform splitting rate update (before sending flow update) of the network loading: 1.
stepZeroIterationInitialisation(boolean) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Perform initialisation of the network loading.
STOCHASTIC - Static variable in class org.goplanit.path.choice.PathChoice: short for stochastic path choice type
StochasticPathChoice - Class in org.goplanit.path.choice: Stochastic path choice component.
StochasticPathChoice(StochasticPathChoice) - Constructor for class org.goplanit.path.choice.StochasticPathChoice: Copy constructor
StochasticPathChoice(IdGroupingToken) - Constructor for class org.goplanit.path.choice.StochasticPathChoice: Constructor
StochasticPathChoiceBuilder - Class in org.goplanit.path.choice: All path choice instances are built using this or a derived version of this builder
StochasticPathChoiceBuilder(IdGroupingToken, InputBuilderListener) - Constructor for class org.goplanit.path.choice.StochasticPathChoiceBuilder: Constructor
StochasticPathChoiceConfigurator - Class in org.goplanit.path.choice: Configurator for FixedConnectoidTravelTimeCost implementation
StochasticPathChoiceConfigurator() - Constructor for class org.goplanit.path.choice.StochasticPathChoiceConfigurator: Constructor
STOP - org.goplanit.gtfs.enums.GtfsObjectType
STOP - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a halt tag used frequently under PTv1 i.c.w.
STOP_AREA - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: A relation that contains all elements of a train, subway, monorail, tram, bus, trolleybus, aerialway, or ferry stop
STOP_CODE - org.goplanit.gtfs.enums.GtfsKeyType
STOP_DESC - org.goplanit.gtfs.enums.GtfsKeyType
STOP_FACILITY - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlElements
STOP_HEADSIGN - org.goplanit.gtfs.enums.GtfsKeyType
STOP_ID - org.goplanit.gtfs.enums.GtfsKeyType
STOP_LAT - org.goplanit.gtfs.enums.GtfsKeyType
STOP_LON - org.goplanit.gtfs.enums.GtfsKeyType
STOP_NAME - org.goplanit.gtfs.enums.GtfsKeyType
STOP_POSITION - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: The position on the street or rails where a public transport vehicle stops
STOP_ROLE - Static variable in class org.goplanit.osm.tags.OsmPtv2Tags: stop_position members in a stop_area relation take on this role identifier
STOP_SEQUENCE - org.goplanit.gtfs.enums.GtfsKeyType
STOP_TIME - org.goplanit.gtfs.enums.GtfsObjectType
STOP_TIMES - org.goplanit.gtfs.enums.GtfsFileType
STOP_TIMEZONE - org.goplanit.gtfs.enums.GtfsKeyType
STOP_URL - org.goplanit.gtfs.enums.GtfsKeyType
stopCriterion - Variable in class org.goplanit.gap.GapFunction: The stopCriterion to use
StopCriterion - Class in org.goplanit.gap: StopCriterion class.
StopCriterion() - Constructor for class org.goplanit.gap.StopCriterion: Default constructor
StopCriterion(StopCriterion) - Constructor for class org.goplanit.gap.StopCriterion
stopCriterionConfigurator - Variable in class org.goplanit.gap.GapFunctionConfigurator: the configurator for the stop critetion
StopCriterionConfigurator - Class in org.goplanit.gap: Base class for all stop criterion configurator implementations
StopCriterionConfigurator() - Constructor for class org.goplanit.gap.StopCriterionConfigurator: Constructor
STOPS - org.goplanit.gtfs.enums.GtfsFileType
STRING - org.goplanit.output.enums.DataType
StringUtils - Class in org.goplanit.utils.misc: Some simple string utilities
StringUtils() - Constructor for class org.goplanit.utils.misc.StringUtils
SubOutputTypeEnum - Interface in org.goplanit.output.enums: Marker interface to indicate enums that are of a subtype of OutputType
SUBWAY - org.goplanit.utils.mode.PredefinedModeType
SUBWAY - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
SUBWAY - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
SUBWAY_ENTRANCE - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: an entrance to a station for pedestrians (and or cyclists)
SUBWAY_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.SubwayMode
SUBWAY_USABLITY_FEATURES - Static variable in class org.goplanit.mode.SubwayMode
SubwayMode - Class in org.goplanit.mode: the predefined subway mode name: subway maxspeed (km/h): 60 pcu: 6 vehicular type: VEHICULAR motorisation: MOTORISED track: RAIL use: PUBLIC
SubwayMode(IdGroupingToken) - Constructor for class org.goplanit.mode.SubwayMode: Constructor for subway mode
SUNDAY - org.goplanit.gtfs.enums.GtfsKeyType
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsAgency: Supported keys for a GTFS agency instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsAttribution: Supported keys for a GTFS feed attribution instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsCalendar: Supported keys for a GTFS calendar instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsCalendarDate: Supported keys for a GTFS calendar date instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsFareAttribute: Supported keys for a GTFS fare attribute instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsFareRule: Supported keys for a GTFS fare rule instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsFeedInfo: Supported keys for a GTFS feed information instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsFrequency: Supported keys for a GTFS frequencies instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsLevel: Supported keys for a GTFS levels instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsPathway: Supported keys for a GTFS shape instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsRoute: Supported keys for a GTFS route instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsShape: Supported keys for a GTFS shape instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsStop: Supported keys for a GTFS stop instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsStopTime: Supported keys for a GTFS stop time instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsTransfer: Supported keys for a GTFS transfer instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsTranslation: Supported keys for a GTFS translation instance
SUPPORTED_KEYS - Static variable in class org.goplanit.gtfs.model.GtfsTrip: Supported keys for a GTFS trip instance
supportedModes - Variable in class org.goplanit.network.layer.macroscopic.AccessGroupPropertiesImpl: modes supported by this access group
supportedModes - Variable in class org.goplanit.network.layer.TransportLayerImpl: the modes supported by this layer
supportedOsmRailLinkSegmentTypes - Static variable in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: the list of rail types for which we have default link segment type mapping available out of the box
supportedOsmRoadLinkSegmentTypes - Static variable in class org.goplanit.osm.physical.network.macroscopic.PlanitOsmNetwork: the list of road types for which we have default link segment type mapping available out of the box
supports(Mode) - Method in class org.goplanit.network.layer.ServiceNetworkLayerImpl: Result delegate from underlying parent layer
supports(Mode) - Method in interface org.goplanit.utils.network.layer.TransportLayer: Determine if mode is supported by this layer
supportsUnitOverride() - Method in class org.goplanit.output.property.CalculatedSpeedOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.CapacityPerLaneOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.DensityOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.FlowOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.InflowOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.LengthOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.LinkSegmentCostOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.MaximumDensityOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.MaximumSpeedOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.OutflowOutputProperty: An output property can be allowed to deviate from its default unit.
supportsUnitOverride() - Method in class org.goplanit.output.property.OutputProperty: An output property can be allowed to deviate from its default unit.
SURINAME - Static variable in class org.goplanit.utils.locale.CountryNames
surroundwithBrackets(String) - Static method in class org.goplanit.utils.misc.LoggingUtils: Surround string with brackets "[%s]"
swap(int, int, double[][]) - Static method in class org.goplanit.assignment.ltm.sltm.LinkSegmentData: Swap the two 2Darray references
swapCurrentAndNextFlowAcceptanceFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: equate the current flow acceptance factors to the next (reference update, no copy)
swapCurrentAndNextFlowCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: equate the current flow capacity factors to the next (reference update, no copy)
swapCurrentAndNextReceivingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.ReceivingFlowData: Swap the current and next receiving flows
swapCurrentAndNextSendingFlows() - Method in class org.goplanit.assignment.ltm.sltm.loading.SendingFlowData: replace current sending flows by the next sending flows
swapCurrentAndNextStorageCapacityFactors() - Method in class org.goplanit.assignment.ltm.sltm.loading.NetworkLoadingFactorData: equate the current storage capacity factors to the next (reference update, no copy)
SyncXmlIdToIdBreakEdgeHandler - Class in org.goplanit.graph.modifier.event.handler: Whenever edges are broken, these edges' XML ids remain the same and are no longer unique.
SyncXmlIdToIdBreakEdgeHandler() - Constructor for class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeHandler: Default constructor
SyncXmlIdToIdBreakEdgeSegmentHandler - Class in org.goplanit.graph.modifier.event.handler: Whenever edge segments are broken, their edge segments' xml ids remain the same and are no longer unique.
SyncXmlIdToIdBreakEdgeSegmentHandler() - Constructor for class org.goplanit.graph.modifier.event.handler.SyncXmlIdToIdBreakEdgeSegmentHandler: Default constructor

T

TABLE_NAME - org.goplanit.gtfs.enums.GtfsKeyType
TAMPERE - Static variable in interface org.goplanit.algorithms.nodemodel.NodeModel: Short hand for Tampere node model class type
TampereNodeModel - Class in org.goplanit.algorithms.nodemodel: General First order node model implementation as proposed by Tampere et al.
TampereNodeModel(TampereNodeModelInput) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModel: Constructor
TampereNodeModelComponent - Class in org.goplanit.supply.network.nodemodel: Tampere node model traffic component signalling that the Tampere node model algorithm is to be used
TampereNodeModelComponent(TampereNodeModelComponent) - Constructor for class org.goplanit.supply.network.nodemodel.TampereNodeModelComponent: Copy constructor
TampereNodeModelComponent(IdGroupingToken) - Constructor for class org.goplanit.supply.network.nodemodel.TampereNodeModelComponent: Base Constructor
TampereNodeModelConfigurator - Class in org.goplanit.supply.network.nodemodel: Configurator for FixedConnectoidTravelTimeCost implementation
TampereNodeModelConfigurator() - Constructor for class org.goplanit.supply.network.nodemodel.TampereNodeModelConfigurator: Constructor
TampereNodeModelFixedInput - Class in org.goplanit.algorithms.nodemodel: Inner class that holds the mapping of the inputs to/from the underlying physical network (if any).
TampereNodeModelFixedInput(Node, boolean) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: Constructor.
TampereNodeModelFixedInput(Array1D<Double>) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: Constructor.
TampereNodeModelFixedInput(Array1D<Double>, Array1D<Double>) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModelFixedInput: Constructor.
TampereNodeModelInput - Class in org.goplanit.algorithms.nodemodel: Inner class that allows the user to set all inputs for the TampereNodeModel, it takes fixed inputs and supplements it with the information of the variable inputs, meaning inputs that can vary during the simulation such as turn sending flows (t_ab), and potentially receiving flows (r_b)
TampereNodeModelInput(TampereNodeModelFixedInput, Array2D<Double>) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: Constructor for a particular node model run
TampereNodeModelInput(TampereNodeModelFixedInput, Array2D<Double>, Array1D<Double>) - Constructor for class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: Constructor for a particular node model run.
TANZANIA - Static variable in class org.goplanit.utils.locale.CountryNames
TAXI - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: taxi
TERTIARY - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
TERTIARY_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
TERTIARY_LINK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
TERTIARY_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
test(Object) - Method in class org.goplanit.utils.predicate.NotNull
TestOutputDto<A,B,C> - Class in org.goplanit.utils.test: Data Transfer Object used to store results in unit testing for PlanItIO
TestOutputDto(A, B, C) - Constructor for class org.goplanit.utils.test.TestOutputDto
THAILAND - Static variable in class org.goplanit.utils.locale.CountryNames
theGraph - Variable in class org.goplanit.graph.modifier.GraphModifierImpl: the graph to modify
throwIf(boolean, String, Object...) - Static method in exception org.goplanit.utils.exceptions.PlanItException: Throw a planitException if condition is met
throwIfNull(Object, String) - Static method in exception org.goplanit.utils.exceptions.PlanItException: Throw a planitException if object is null
throwIfNull(Object, String, Object...) - Static method in exception org.goplanit.utils.exceptions.PlanItException: Throw a planitException if object is null
THURSDAY - org.goplanit.gtfs.enums.GtfsKeyType
TIME - org.goplanit.utils.unit.UnitGroup
TIME_PERIOD_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
TIME_PERIOD_ID - org.goplanit.output.property.OutputPropertyType
TIME_PERIOD_XML_ID - org.goplanit.output.property.OutputPropertyType
TimePeriod - Interface in org.goplanit.utils.time: Represents a time period within the day.
timePeriodAgnosticCosts - Variable in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Store initial cost for each mode and link segment, not linked to a particular time period
timePeriodCosts - Variable in class org.goplanit.cost.physical.initial.InitialLinkSegmentCost: Map to store initial cost for each mode and link segment, linked to a particular time period
TimePeriodExternalIdOutputProperty - Class in org.goplanit.output.property
TimePeriodExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.TimePeriodExternalIdOutputProperty
TimePeriodIdOutputProperty - Class in org.goplanit.output.property
TimePeriodIdOutputProperty() - Constructor for class org.goplanit.output.property.TimePeriodIdOutputProperty
TimePeriodImpl - Class in org.goplanit.time: Represents a time period within the day.
TimePeriodImpl(TimePeriodImpl) - Constructor for class org.goplanit.time.TimePeriodImpl: Copy constructor
TimePeriodImpl(IdGroupingToken, long, long) - Constructor for class org.goplanit.time.TimePeriodImpl: Constructor
TimePeriodImpl(IdGroupingToken, String, long, long) - Constructor for class org.goplanit.time.TimePeriodImpl: Constructor
timePeriods - Variable in class org.goplanit.demands.Demands: internal class instance containing all time periods on this demand instance
TimePeriods() - Constructor for class org.goplanit.demands.Demands.TimePeriods: Constructor
TimePeriods(Demands.TimePeriods) - Constructor for class org.goplanit.demands.Demands.TimePeriods: Copy constructor
TimePeriodUtils - Class in org.goplanit.utils.time: some utilities for the TimePeriod interface
TimePeriodUtils() - Constructor for class org.goplanit.utils.time.TimePeriodUtils
TimePeriodXmlIdOutputProperty - Class in org.goplanit.output.property
TimePeriodXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.TimePeriodXmlIdOutputProperty
TIMEPOINT - org.goplanit.gtfs.enums.GtfsKeyType
TimeUnit - Class in org.goplanit.utils.unit: Unit class for all time related units.
TimeUnit(UnitType) - Constructor for class org.goplanit.utils.unit.TimeUnit: Constructor
TimeUnits - Enum in org.goplanit.tntp.enums
TntpDemandsReader - Class in org.goplanit.tntp.converter.demands: Demands reader component for TNTP data format
TntpDemandsReader(String) - Constructor for class org.goplanit.tntp.converter.demands.TntpDemandsReader: Constructor
TntpDemandsReaderSettings - Class in org.goplanit.tntp.converter.demands: Settings for the TNTP demands reader
TntpDemandsReaderSettings() - Constructor for class org.goplanit.tntp.converter.demands.TntpDemandsReaderSettings
TntpHeaderConstants - Class in org.goplanit.tntp: Constants used in the header of TnTp files
TntpHeaderConstants() - Constructor for class org.goplanit.tntp.TntpHeaderConstants
TntpInputBuilder - Class in org.goplanit.tntp.input: Class which reads input from TNTP files
TntpInputBuilder(String, String, String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, double) - Constructor for class org.goplanit.tntp.input.TntpInputBuilder: Constructor
TntpInputBuilder(String, String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, CapacityPeriod, double) - Constructor for class org.goplanit.tntp.input.TntpInputBuilder: Constructor
TntpInputBuilder(String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, double) - Constructor for class org.goplanit.tntp.input.TntpInputBuilder: Constructor
TntpInputBuilder(String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, CapacityPeriod, double) - Constructor for class org.goplanit.tntp.input.TntpInputBuilder: Constructor
TntpMain - Class in org.goplanit.tntp: Main class for running TNTP models
TntpMain() - Constructor for class org.goplanit.tntp.TntpMain
TntpNetworkReader - Class in org.goplanit.tntp.converter.network: Network reader component for TNTP data format
TntpNetworkReader(String, String) - Constructor for class org.goplanit.tntp.converter.network.TntpNetworkReader: Constructor
TntpNetworkReader(String, String, TntpNetworkReaderSettings) - Constructor for class org.goplanit.tntp.converter.network.TntpNetworkReader: Constructor
TntpNetworkReaderSettings - Class in org.goplanit.tntp.converter.network: Settings for Tntp network reader
TntpNetworkReaderSettings() - Constructor for class org.goplanit.tntp.converter.network.TntpNetworkReaderSettings
TntpProject - Class in org.goplanit.tntp.project: TNTP implementation of CustomPlanItProject
TntpProject(String, String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, CapacityPeriod, double) - Constructor for class org.goplanit.tntp.project.TntpProject: Constructor
TntpProject(String, String, Map<NetworkFileColumnType, Integer>, SpeedUnits, LengthUnits, CapacityPeriod, double) - Constructor for class org.goplanit.tntp.project.TntpProject: Constructor
TntpProject(TntpInputBuilder) - Constructor for class org.goplanit.tntp.project.TntpProject: Constructor
TntpZoningReader - Class in org.goplanit.tntp.converter.zoning: Zoning reader component for TNTP data format
TntpZoningReader(String) - Constructor for class org.goplanit.tntp.converter.zoning.TntpZoningReader: Constructor
TntpZoningReaderSettings - Class in org.goplanit.tntp.converter.zoning: Settings for the Tntp zoning reader
TntpZoningReaderSettings() - Constructor for class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings
TO - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
TO_STOP_ID - org.goplanit.gtfs.enums.GtfsKeyType
toBigInteger(String) - Static method in class org.goplanit.utils.math.TypeConversionUtil: convert a string that can be interpreted as a long to a type that parses long via .valueOf(long theLong)
toCollection() - Method in interface org.goplanit.utils.wrapper.MapWrapper: Collect values as unmodifiable collection
toCollection() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Collect values as unmodifiable collection
TOLL - org.goplanit.tntp.enums.NetworkFileColumnType
TONGA - Static variable in class org.goplanit.utils.locale.CountryNames
TopologicalLayer - Interface in org.goplanit.utils.network.layer: An topological layer represents a layer suited for a number of modes that is topologically meaningful without enforcing the actual implemantation of this topology.
TopologicalLayerImpl - Class in org.goplanit.network.layer: An transport layer that is of a topological nature, i.e., it has node, links, etc.
TopologicalLayerImpl(TopologicalLayerImpl) - Constructor for class org.goplanit.network.layer.TopologicalLayerImpl: Copy Constructor
TopologicalLayerImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.TopologicalLayerImpl: Constructor
TopologicalLayerModifier - Interface in org.goplanit.utils.network.layer.modifier: Interface to define all layer wide modifications functionality to be exposed.
TopologicalLayerNetwork<T extends TopologicalLayer,U extends TopologicalLayers<T>> - Class in org.goplanit.network: A network with topological transport layers, meaning that apart from representing a physical reality the result is topologically meaningful, has nodes, links, and some geographic notion via a coordinate reference system
TopologicalLayerNetwork(IdGroupingToken) - Constructor for class org.goplanit.network.TopologicalLayerNetwork: Default constructor
TopologicalLayerNetwork(IdGroupingToken, CoordinateReferenceSystem) - Constructor for class org.goplanit.network.TopologicalLayerNetwork: Default constructor
TopologicalLayers<T extends TopologicalLayer> - Interface in org.goplanit.utils.network.layers: interface to manage topological layers, i.e., layers that contain a topologically meaningful representation, without enforcing how this is implemented.
TopologicalLayersImpl<T extends TopologicalLayer> - Class in org.goplanit.network.layers: implementation of the transport layers interface, without the createNew() method, but now with base layer class of TopologicalLayer
TopologicalLayersImpl(TopologicalLayersImpl<T>) - Constructor for class org.goplanit.network.layers.TopologicalLayersImpl: Constructor
TopologicalLayersImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layers.TopologicalLayersImpl: Constructor
TopologicalModifier - Interface in org.goplanit.utils.graph.modifier: Base modifier interface regarding topological changes to an underlying topological implementation, e.g.
topologicalSort(boolean) - Method in interface org.goplanit.graph.directed.acyclic.ACyclicSubGraph: Perform a topological sort on this graph.
topologicalSort(boolean) - Method in class org.goplanit.graph.directed.acyclic.ACyclicSubGraphImpl: Perform topological sorting from root, based on Gupta et al.
toString() - Method in class org.goplanit.graph.GraphEntityImpl
toString() - Method in class org.goplanit.gtfs.scheme.GtfsFileScheme
toString() - Method in class org.goplanit.network.layer.macroscopic.MacroscopicLinkSegmentTypeImpl
toString() - Method in class org.goplanit.time.TimePeriodImpl: Output this object as a String
toString() - Method in class org.goplanit.utils.event.EventImpl
toString() - Method in class org.goplanit.utils.event.EventType
toString() - Method in class org.goplanit.utils.id.IdGroupingToken: collect the string token
toString() - Method in class org.goplanit.utils.misc.Pair: Convert to string
toString() - Method in class org.goplanit.utils.unit.GroupUnit
toString() - Method in class org.goplanit.utils.unit.SimpleUnit
toString() - Method in class org.goplanit.zoning.ZoneImpl
TOURIST_BUS - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: tourist bus for long distance non public transport
TRACK - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
TRACK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
TRACK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
trackAllNodeTurnFlows - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkTurnFlowUpdateData: Flag indicating if we are tracking all (used) node turn flows or not
TrackModeType - Enum in org.goplanit.utils.mode: a mode utilises either the road or rail as means of propagation.
TRACKS - Static variable in class org.goplanit.osm.tags.OsmRailFeatureTags
tracksPerDirectionIfUnspecified - Variable in class org.goplanit.osm.defaults.OsmLaneDefaults: railway tracks per direction if not configured
TRADITIONAL_STATIC_ASSIGNMENT - Static variable in class org.goplanit.assignment.TrafficAssignment: short hand to choose traditional static assignment as assignment type
TraditionalStaticAssignment - Class in org.goplanit.assignment.traditionalstatic: Traditional static assignment traffic component.This is the class that conducts the actual assignment.
TraditionalStaticAssignment(TraditionalStaticAssignment) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Copy Constructor
TraditionalStaticAssignment(IdGroupingToken) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Base Constructor
TraditionalStaticAssignmentBuilder - Class in org.goplanit.assignment.traditionalstatic: Builder for a traditional static assignment.
TraditionalStaticAssignmentBuilder(IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentBuilder: Constructor
TraditionalStaticAssignmentConfigurator - Class in org.goplanit.assignment.traditionalstatic: Configurator for traditional static assignment.
TraditionalStaticAssignmentConfigurator(Class<TraditionalStaticAssignment>) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentConfigurator: Constructor
TraditionalStaticAssignmentLinkOutputTypeAdapter - Class in org.goplanit.assignment.traditionalstatic: Adapter providing access to the data of the TraditionalStaticAssignment class relevant for link outputs without exposing the internals of the traffic assignment class itself
TraditionalStaticAssignmentLinkOutputTypeAdapter(OutputType, TrafficAssignment) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentLinkOutputTypeAdapter: Constructor
TraditionalStaticAssignmentOdOutputTypeAdapter - Class in org.goplanit.assignment.traditionalstatic: Adapter providing access to the data of the TraditionalStaticAssignment class relevant for origin-destination outputs without exposing the internals of the traffic assignment class itself
TraditionalStaticAssignmentOdOutputTypeAdapter(OutputType, TrafficAssignment) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentOdOutputTypeAdapter: Constructor
TraditionalStaticAssignmentSimulationData - Class in org.goplanit.assignment.traditionalstatic: Simulation data which are specific to Traditional Static Assignment
TraditionalStaticAssignmentSimulationData(IdGroupingToken) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignmentSimulationData: Constructor
TraditionalStaticPathOutputTypeAdapter - Class in org.goplanit.assignment.traditionalstatic: Adapter providing access to the data of the TraditionalStaticAssignment class relevant for OD path outputs without exposing the internals of the traffic assignment class itself
TraditionalStaticPathOutputTypeAdapter(OutputType, TrafficAssignment) - Constructor for class org.goplanit.assignment.traditionalstatic.TraditionalStaticPathOutputTypeAdapter: Constructor
TRAFFIC_SINGALS - Static variable in class org.goplanit.osm.tags.OsmTags
TrafficAssignment - Class in org.goplanit.assignment: Traffic assignment class which simultaneously is responsible for the loading hence it is also considered as a traffic assignment component of this type
TrafficAssignment(TrafficAssignment) - Constructor for class org.goplanit.assignment.TrafficAssignment: Copy Constructor
TrafficAssignment(IdGroupingToken) - Constructor for class org.goplanit.assignment.TrafficAssignment: Constructor.
TrafficAssignmentBuilder<T extends TrafficAssignment> - Class in org.goplanit.assignment: All traffic assignment instances require a network, demand, and (equilibrium) smoothing procedure, all of which should be registered via this generic builder.
TrafficAssignmentBuilder(Class<T>, IdGroupingToken, InputBuilderListener, Demands, Zoning, TransportLayerNetwork<?, ?>) - Constructor for class org.goplanit.assignment.TrafficAssignmentBuilder: Constructor
TrafficAssignmentBuilderFactory - Class in org.goplanit.assignment: Traffic assignment builder factory for the assignment types supported directory by PLANit
TrafficAssignmentBuilderFactory() - Constructor for class org.goplanit.assignment.TrafficAssignmentBuilderFactory
TrafficAssignmentComponentAccessee - Interface in org.goplanit.interactor: Accessee that can be accessed to obtain access to one or more traffic assignment components
TrafficAssignmentComponentAccessor - Interface in org.goplanit.interactor: Implementing class requires access to one or more traffic assignment components.
TrafficAssignmentConfigurator<T extends TrafficAssignment> - Class in org.goplanit.assignment: Configurator class for traffic assignment.
TrafficAssignmentConfigurator(Class<T>) - Constructor for class org.goplanit.assignment.TrafficAssignmentConfigurator: Constructor
TRAILER - Static variable in class org.goplanit.osm.tags.OsmRoadModeTags: vehicle towing a trailer
TRAIN - org.goplanit.utils.mode.PredefinedModeType
TRAIN - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
TRAIN_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.TrainMode
TRAIN_USABLITY_FEATURES - Static variable in class org.goplanit.mode.TrainMode
TrainMode - Class in org.goplanit.mode: the predefined train mode name: train maxspeed (km/h): 140 pcu: 10 vehicular type: VEHICULAR motorisation: MOTORISED track: RAIL use: PUBLIC
TrainMode(IdGroupingToken) - Constructor for class org.goplanit.mode.TrainMode: Constructor for train mode
TRAM - org.goplanit.utils.mode.PredefinedModeType
TRAM - Static variable in class org.goplanit.osm.tags.OsmRailModeTags
TRAM - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
TRAM_PHYSICAL_FEATURES - Static variable in class org.goplanit.mode.TramMode
TRAM_STOP - Static variable in class org.goplanit.osm.tags.OsmPtv1Tags: a tram_stop tag used frequently under PTv1 i.c.w.
TRAM_USABLITY_FEATURES - Static variable in class org.goplanit.mode.TramMode
TramMode - Class in org.goplanit.mode: the predefined tram mode name: tram maxspeed (km/h): 40 pcu: 3 vehicular type: VEHICULAR motorisation: MOTORISED track: RAIL use: PUBLIC
TramMode(IdGroupingToken) - Constructor for class org.goplanit.mode.TramMode: Constructor for train mode
TRANSFER - org.goplanit.gtfs.enums.GtfsObjectType
TRANSFER_DURATION - org.goplanit.gtfs.enums.GtfsKeyType
TRANSFER_TYPE - org.goplanit.gtfs.enums.GtfsKeyType
TRANSFER_ZONE_GROUP_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.TransferZoneGroup: the class to use for the id generation
TRANSFER_ZONE_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.TransferZone: the class to use for the id generation
transferConnectoids - Variable in class org.goplanit.zoning.Zoning: provide access to directed connectoids (of transfer zones)
TRANSFERS - org.goplanit.gtfs.enums.GtfsFileType
TRANSFERS - org.goplanit.gtfs.enums.GtfsKeyType
TransferZone - Interface in org.goplanit.utils.zoning: A zone where transfers between different network layers may occur.
TransferZoneFactory - Interface in org.goplanit.utils.zoning: Factory interface for directed connectoids
TransferZoneFactoryImpl - Class in org.goplanit.zoning: Factory for creating transfer zones (on container)
TransferZoneFactoryImpl(IdGroupingToken, TransferZones) - Constructor for class org.goplanit.zoning.TransferZoneFactoryImpl: Constructor
TransferZoneGroup - Interface in org.goplanit.utils.zoning: A group of transfer zones, can be used to represent for example train stations.
TransferZoneGroupFactory - Interface in org.goplanit.utils.zoning: A Factory for transfer zone groups to register on container
TransferZoneGroupFactoryImpl - Class in org.goplanit.zoning: Factory for creating transfer zone groups (on container)
TransferZoneGroupFactoryImpl(IdGroupingToken, TransferZoneGroups) - Constructor for class org.goplanit.zoning.TransferZoneGroupFactoryImpl: Constructor
TransferZoneGroupHelper - Class in org.goplanit.osm.converter.zoning.handler.helper: Class to provide functionality for parsing PLANit transfer zone groups from OSM entities
TransferZoneGroupHelper(Zoning, OsmZoningReaderData, OsmPublicTransportReaderSettings, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Constructor
TransferZoneGroupImpl - Class in org.goplanit.zoning: A transfer zone group implementation.
TransferZoneGroupImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.TransferZoneGroupImpl: Constructor
TransferZoneGroupImpl(TransferZoneGroupImpl) - Constructor for class org.goplanit.zoning.TransferZoneGroupImpl: Copy constructor
transferZoneGroups - Variable in class org.goplanit.zoning.TransferZoneGroupFactoryImpl: container to use
transferZoneGroups - Variable in class org.goplanit.zoning.Zoning: provide access to transfer zone groups (if any)
TransferZoneGroups - Interface in org.goplanit.utils.zoning: A Container for transfer zone groups which also acts as a factory for creating new transfer zone groups
TransferZoneGroupsImpl - Class in org.goplanit.zoning: Container for transfer zone groups where each transfer zone group logically groups multiple transfer zones together.
TransferZoneGroupsImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.TransferZoneGroupsImpl: Constructor
TransferZoneGroupsImpl(IdGroupingToken, TransferZoneGroupFactory) - Constructor for class org.goplanit.zoning.TransferZoneGroupsImpl: Constructor
TransferZoneGroupsImpl(TransferZoneGroupsImpl) - Constructor for class org.goplanit.zoning.TransferZoneGroupsImpl: Copy constructor
TransferZoneHelper - Class in org.goplanit.osm.converter.zoning.handler.helper: Class to provide functionality for parsing transfer zones from OSM entities
TransferZoneHelper(Zoning, OsmZoningReaderData, OsmPublicTransportReaderSettings, OsmZoningHandlerProfiler) - Constructor for class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneHelper: Constructor
TransferZoneImpl - Class in org.goplanit.zoning: A transfer zone
TransferZoneImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.TransferZoneImpl: constructor
TransferZoneImpl(TransferZoneImpl) - Constructor for class org.goplanit.zoning.TransferZoneImpl: Copy constructor
transferZoneMap - Variable in class org.goplanit.zoning.TransferZoneGroupImpl: Map storing all the transfer zones in the group
transferZones - Variable in class org.goplanit.zoning.TransferZoneFactoryImpl: container to use
transferZones - Variable in class org.goplanit.zoning.Zoning: provide access to transfer zones (if any)
TransferZones - Interface in org.goplanit.utils.zoning: Container class for TransferZone instances
TransferZonesImpl - Class in org.goplanit.zoning: implementation of the Zones <T> interface for transfer zones
TransferZonesImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.TransferZonesImpl: Constructor
TransferZonesImpl(TransferZoneFactory) - Constructor for class org.goplanit.zoning.TransferZonesImpl: Constructor
TransferZonesImpl(TransferZonesImpl) - Constructor for class org.goplanit.zoning.TransferZonesImpl: Copy constructor
TransferZoneType - Enum in org.goplanit.utils.zoning: Types of transfer zones to more easily identify their purpose
transform(CoordinateReferenceSystem) - Method in class org.goplanit.network.TopologicalLayerNetwork: change the coordinate system, which will result in an update of all geometries in the network layers from the original CRS to the new CRS.
transform(CoordinateReferenceSystem, CoordinateReferenceSystem) - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: transform all underlying geometries in the layer from the given crs to the new crs
transform(CoordinateReferenceSystem, CoordinateReferenceSystem) - Method in interface org.goplanit.utils.network.layer.TopologicalLayer: transform all underlying geometries in the layer from the given crs to the new crs
transformGeometries(MathTransform) - Method in interface org.goplanit.utils.graph.UntypedGraph: transform all geometries of the nodes and edges using the same transformer, can be used to transform from one coordinate reference system to another, or perform translations, etc.
transformGeometry(MathTransform) - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Not allowed on service leg, perform on underlying links instead.
transformGeometry(MathTransform) - Method in interface org.goplanit.utils.graph.Edge: transform the line string information of this edge using the passed in MathTransform
transformPosition(MathTransform) - Method in interface org.goplanit.utils.graph.Vertex: transform the position information of this vertex using the passed in MathTransform
TRANSIT_SCHEDULE - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlElements
TRANSIT_STOPS - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlElements
transitScheduleFileName - Variable in class org.goplanit.matsim.converter.MatsimZoningWriterSettings: the output file name to use for the transit schedule, default is set to DEFAULT_TRANSIT_SCHEDULE_FILE_NAME
TRANSLATION - org.goplanit.gtfs.enums.GtfsKeyType
TRANSLATION - org.goplanit.gtfs.enums.GtfsObjectType
TRANSLATIONS - org.goplanit.gtfs.enums.GtfsFileType
TRANSPORT_LAYER_ID_CLASS - Static variable in interface org.goplanit.utils.network.layer.TransportLayer: class used for managed id generation
TransportLayer - Interface in org.goplanit.utils.network.layer: An infrastructure layer represents the infrastructure suited for a number of modes.
TransportLayerImpl - Class in org.goplanit.network.layer: Implementation of TransportLayer interface with only barebones functionality to support ids and modes.
TransportLayerImpl(TransportLayerImpl) - Constructor for class org.goplanit.network.layer.TransportLayerImpl: Copy constructor
TransportLayerImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layer.TransportLayerImpl: Constructor
TransportLayerNetwork<U extends TransportLayer,T extends TransportLayers<U>> - Class in org.goplanit.network: A transport network with one or more layers.
TransportLayerNetwork(IdGroupingToken) - Constructor for class org.goplanit.network.TransportLayerNetwork: Default constructor
TransportLayers<T extends TransportLayer> - Interface in org.goplanit.utils.network.layers: interface to manage transport layers.
transportLayersByXmlId - Variable in class org.goplanit.network.MacroscopicNetworkLayerConfigurator: track unique proposed layers
TransportLayersImpl<T extends TransportLayer> - Class in org.goplanit.network.layers: Base implementation of the TransportLayer interface, without the createNew() method
TransportLayersImpl(TransportLayersImpl<T>) - Constructor for class org.goplanit.network.layers.TransportLayersImpl: Constructor
TransportLayersImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layers.TransportLayersImpl: Constructor
TransportModelNetwork - Class in org.goplanit.network.transport: Entire transport network that is being modeled including both the physical and virtual aspects of it as well as the zoning.
TransportModelNetwork(TransportLayerNetwork<?, ?>, Zoning) - Constructor for class org.goplanit.network.transport.TransportModelNetwork: Constructor
TravelerType - Class in org.goplanit.userclass: Traveler type is a placeholder for all different types of traveler characteristics that affect the user class in the path choice component of traffic assignment.
TravelerType(TravelerType) - Constructor for class org.goplanit.userclass.TravelerType: Copy constructor
TravelerType(IdGroupingToken) - Constructor for class org.goplanit.userclass.TravelerType: Constructor
TravelerType(IdGroupingToken, String) - Constructor for class org.goplanit.userclass.TravelerType: Constructor
travelerTypes - Variable in class org.goplanit.demands.Demands: internal class instance containing all traveler types on this demand instance
TravelerTypes() - Constructor for class org.goplanit.demands.Demands.TravelerTypes: Constructor
TravelerTypes(Demands.TravelerTypes) - Constructor for class org.goplanit.demands.Demands.TravelerTypes: Copy constructor
TRAVELLER_ACCESS - org.goplanit.utils.zoning.ConnectoidType
TRAVERSAL_TIME - org.goplanit.gtfs.enums.GtfsKeyType
TRAVERSER - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
TriConsumer<T,U,V> - Interface in org.goplanit.utils.functionalinterface: Function Interface which can process three input objects.
TriFunction<R,S,T,U> - Interface in org.goplanit.utils.functionalinterface: Function Interface which can process three input objects and produce an output Used in PlanItIO test cases.
TriggerEvent - Class in org.goplanit.assignment.ltm.eltm.event: A trigger event emanates from a link boundary (its source) with a particular cumulative value and time and potentially other information which should be constructed by subclassing this class
TriggerEvent(EventType, LinkSegmentBoundary, CumulativePoint, Serializable) - Constructor for class org.goplanit.assignment.ltm.eltm.event.TriggerEvent: Constructor
TriggerFlowEvent - Class in org.goplanit.assignment.ltm.eltm.event: A trigger flow event represents a flow rate that is being triggered exogenously, typically by a node on either side of the link segment.
TriggerFlowEvent(LinkSegmentBoundary, CumulativePoint, double) - Constructor for class org.goplanit.assignment.ltm.eltm.event.TriggerFlowEvent: Constructor
TRINIDAD_TOBAGO - Static variable in class org.goplanit.utils.locale.CountryNames
TRIP - org.goplanit.gtfs.enums.GtfsObjectType
TRIP_HEADSIGN - org.goplanit.gtfs.enums.GtfsKeyType
TRIP_ID - org.goplanit.gtfs.enums.GtfsKeyType
TRIP_SHORT_NAME - org.goplanit.gtfs.enums.GtfsKeyType
TRIPS - org.goplanit.gtfs.enums.GtfsFileType
TRUNK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
TRUNK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
TRUNK_LINK - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
TRUNK_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane
TUESDAY - org.goplanit.gtfs.enums.GtfsKeyType
tupleSeparator - Variable in class org.goplanit.io.xml.util.PlanitXmlWriterSettings: tuple separator, default is CharacterUtils.SPACE
TURKS_CAICOS_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
TURNING_CIRCLE - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
turnSendingFlows - Variable in class org.goplanit.algorithms.nodemodel.TampereNodeModelInput: the turn sending flows offered to the node model t_ab
TURNTABLE - Static variable in class org.goplanit.osm.tags.OsmRailwayTags: turn table is a circular railway that we do not yet support
TUVALU - Static variable in class org.goplanit.utils.locale.CountryNames
TWO_WAY - Static variable in class org.goplanit.tntp.converter.network.TntpNetworkReader
type - Variable in class org.goplanit.zoning.ConnectoidImpl: the type of connectoid to identify its purpose more easily
TYPE - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
TYPE - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags: key for relation types
TYPE - Static variable in class org.goplanit.osm.tags.OsmTags
TypeConversionUtil - Class in org.goplanit.utils.math: some utility functions for converting types easily
TypeConversionUtil() - Constructor for class org.goplanit.utils.math.TypeConversionUtil

U

UGANDA - Static variable in class org.goplanit.utils.locale.CountryNames
UNCLASSIFIED - Static variable in class org.goplanit.osm.tags.OsmHighwayTags
UNCLASSIFIED_LINK_CAPACITY - Static variable in class org.goplanit.osm.util.OsmConstants: default for this type in pcu/h/lane set to DEFAULT_MINIMUM_CAPACITY_LANE
UNDIRECTED_CONNECTOID_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.UndirectedConnectoid: the class to use for the additional directed connectoid id generation
UndirectedConnectoid - Interface in org.goplanit.utils.zoning: An undirected connectoid is accessed through a referenced node where all incoming/outgoing edges/edge segments potentially have access.
UndirectedConnectoidFactory - Interface in org.goplanit.utils.zoning: Factory interface for undirected connectoids
UndirectedConnectoidFactoryImpl - Class in org.goplanit.zoning: Factory for creating new undirected connectoids on container
UndirectedConnectoidFactoryImpl(IdGroupingToken, UndirectedConnectoids) - Constructor for class org.goplanit.zoning.UndirectedConnectoidFactoryImpl: Constructor
undirectedConnectoidId - Variable in class org.goplanit.zoning.UndirectedConnectoidImpl: unique id across undirected connectoids
UndirectedConnectoidImpl - Class in org.goplanit.zoning: Undirected connectoid connecting one or more (transfer/OD) zone(s) to the physical road network, each connection will yield a connectoid edge and two connectoid segments when constructing the transport network internally based on the referenced node
UndirectedConnectoidImpl(IdGroupingToken, DirectedVertex) - Constructor for class org.goplanit.zoning.UndirectedConnectoidImpl: Constructor
UndirectedConnectoidImpl(IdGroupingToken, DirectedVertex, Zone) - Constructor for class org.goplanit.zoning.UndirectedConnectoidImpl: Constructor
UndirectedConnectoidImpl(IdGroupingToken, DirectedVertex, Zone, double) - Constructor for class org.goplanit.zoning.UndirectedConnectoidImpl: Constructor
UndirectedConnectoidImpl(UndirectedConnectoidImpl) - Constructor for class org.goplanit.zoning.UndirectedConnectoidImpl: Copy constructor
undirectedConnectoids - Variable in class org.goplanit.zoning.UndirectedConnectoidFactoryImpl: container to use
UndirectedConnectoids - Interface in org.goplanit.utils.zoning: container and factory class for undirected connectoids
UndirectedConnectoidsImpl - Class in org.goplanit.zoning: Implementation of Connectoids class
UndirectedConnectoidsImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.UndirectedConnectoidsImpl: Constructor
UndirectedConnectoidsImpl(IdGroupingToken, UndirectedConnectoidFactory) - Constructor for class org.goplanit.zoning.UndirectedConnectoidsImpl: Constructor
UndirectedConnectoidsImpl(UndirectedConnectoidsImpl) - Constructor for class org.goplanit.zoning.UndirectedConnectoidsImpl: Copy constructor
Unit - Interface in org.goplanit.utils.unit: Lightweight Unit interface to define units and allow for conversions between them
UnitGroup - Enum in org.goplanit.utils.unit
unitType - Variable in class org.goplanit.utils.unit.SimpleUnit: type of the unit
UnitType - Enum in org.goplanit.utils.unit
UNKNOWN - org.goplanit.utils.zoning.ConnectoidType
UNKNOWN - org.goplanit.utils.zoning.TransferZoneType
UNKNOWN - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: unknown tag
unregisterOutputFormatter(OutputFormatter) - Method in class org.goplanit.assignment.TrafficAssignmentConfigurator: Remove an output formatter which has already been registered This is used by the Python interface, which registers the PlanItIO formatter by default
unregisterOutputFormatter(OutputFormatter) - Method in class org.goplanit.output.OutputManager: Remove an output formatter which has previously been registered
UntypedDirectedGraph<V extends DirectedVertex,E extends DirectedEdge,ES extends EdgeSegment> - Interface in org.goplanit.utils.graph: Interface for a directed graph
UntypedDirectedGraphImpl<V extends DirectedVertex,E extends DirectedEdge,ES extends EdgeSegment> - Class in org.goplanit.graph.directed: A directed graph implementation consisting of directed vertices and directed edges
UntypedDirectedGraphImpl(UntypedDirectedGraphImpl<V, E, ES>) - Constructor for class org.goplanit.graph.directed.UntypedDirectedGraphImpl: Copy constructor
UntypedDirectedGraphImpl(IdGroupingToken, GraphEntities<V>, GraphEntities<E>, GraphEntities<ES>) - Constructor for class org.goplanit.graph.directed.UntypedDirectedGraphImpl: DirectedGraph Constructor
UntypedDirectedGraphLayer<V extends DirectedVertex,E extends DirectedEdge,S extends EdgeSegment> - Interface in org.goplanit.utils.network.layer: Network layer comprising of containers with custom entity types.
UntypedDirectedGraphLayerModifier<V extends DirectedVertex,E extends DirectedEdge,S extends EdgeSegment> - Interface in org.goplanit.utils.network.layer.modifier: Modifier with additional functionality related to modifications to layers derived from UntypedDirectedGraphLayer.
UntypedDirectedGraphLayers<L extends UntypedDirectedGraphLayer<?,?,?>> - Interface in org.goplanit.utils.network.layers: Interface to manage physical network layers, i.e., layers that contain a topologically meaningful representation in the form of nodes and links
UntypedGraph<V extends Vertex,E extends Edge> - Interface in org.goplanit.utils.graph: A graph interface consisting of vertices and edges without specifying a concrete container type to access them.
UntypedGraphImpl<V extends Vertex,E extends Edge> - Class in org.goplanit.graph: A graph implementation consisting of vertices and edges
UntypedGraphImpl(UntypedGraphImpl<V, E>) - Constructor for class org.goplanit.graph.UntypedGraphImpl: Copy constructor for shallow copy
UntypedGraphImpl(IdGroupingToken, GraphEntities<V>, GraphEntities<E>) - Constructor for class org.goplanit.graph.UntypedGraphImpl: Graph Constructor
UntypedLinkOutputTypeAdapter<T extends LinkSegment> - Interface in org.goplanit.output.adapter: Interface defining the methods required for a link output adapter
UntypedLinkOutputTypeAdapterImpl<LS extends LinkSegment> - Class in org.goplanit.output.adapter: Top-level abstract class which defines the common methods required by Link output type adapters
UntypedLinkOutputTypeAdapterImpl(OutputType, TrafficAssignment) - Constructor for class org.goplanit.output.adapter.UntypedLinkOutputTypeAdapterImpl: Constructor
UntypedNetworkLayerImpl<V extends DirectedVertex,E extends DirectedEdge,S extends EdgeSegment> - Class in org.goplanit.network.layer: Model free network layer consisting of containers for vertices, edges, and edge segments each of which can be typed separately.
UntypedNetworkLayerImpl(UntypedNetworkLayerImpl<V, E, S>) - Constructor for class org.goplanit.network.layer.UntypedNetworkLayerImpl: Copy constructor
UntypedNetworkLayerImpl(IdGroupingToken, Vx, Ex, Sx) - Constructor for class org.goplanit.network.layer.UntypedNetworkLayerImpl: Network Constructor
UntypedNetworkLayerImpl(IdGroupingToken, Vx, Ex, Sx, UntypedDirectedGraphLayerModifier<V, E, S>) - Constructor for class org.goplanit.network.layer.UntypedNetworkLayerImpl: Network Constructor
UntypedNetworkLayerModifierImpl<V extends DirectedVertex,E extends DirectedEdge,S extends EdgeSegment> - Class in org.goplanit.network.layer.modifier: Modifier class for model free network layer, generics used to allow derived classes to provide typed versions for containers and content of containers.
UntypedNetworkLayerModifierImpl(UntypedDirectedGraphImpl<V, E, S>) - Constructor for class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Constructor
UntypedNetworkLayerModifierImpl(DirectedGraphModifier) - Constructor for class org.goplanit.network.layer.modifier.UntypedNetworkLayerModifierImpl: Constructor
UntypedPhysicalLayer<N extends Node,L extends Link,LS extends LinkSegment> - Interface in org.goplanit.utils.network.layer.physical: Physical topological Network consisting of nodes, links and link segments
UntypedPhysicalLayerImpl<N extends Node,L extends Link,LS extends LinkSegment> - Class in org.goplanit.network.layer: Model free Network consisting of managed nodes, links, and link segments, each of which can be iterated over.
UntypedPhysicalLayerImpl(UntypedPhysicalLayerImpl) - Constructor for class org.goplanit.network.layer.UntypedPhysicalLayerImpl: Copy constructor
UntypedPhysicalLayerImpl(IdGroupingToken, Nx, Lx, Sx) - Constructor for class org.goplanit.network.layer.UntypedPhysicalLayerImpl: Constructor
UntypedPhysicalNetwork<L extends UntypedPhysicalLayer<?,?,?>,LS extends UntypedPhysicalNetworkLayers<L>> - Class in org.goplanit.network: A network that comprises physical topological transport network elements, i.e., roads, rail, etc.
UntypedPhysicalNetwork(IdGroupingToken) - Constructor for class org.goplanit.network.UntypedPhysicalNetwork: Default constructor
UntypedPhysicalNetwork(IdGroupingToken, CoordinateReferenceSystem) - Constructor for class org.goplanit.network.UntypedPhysicalNetwork: Default constructor
UntypedPhysicalNetworkLayers<L extends UntypedPhysicalLayer<?,?,?>> - Interface in org.goplanit.utils.network.layers: Interface to manage physical network layers, i.e., layers that contain a topologically meaningful representation in the form of nodes and links
UntypedPhysicalNetworkLayersImpl<L extends UntypedPhysicalLayer<?,?,?>> - Class in org.goplanit.network.layers: Implementation of container and factory to manage physical network layers.
UntypedPhysicalNetworkLayersImpl(UntypedPhysicalNetworkLayersImpl<L>) - Constructor for class org.goplanit.network.layers.UntypedPhysicalNetworkLayersImpl: Constructor
UntypedPhysicalNetworkLayersImpl(IdGroupingToken) - Constructor for class org.goplanit.network.layers.UntypedPhysicalNetworkLayersImpl: Constructor
updateAccessKeyBasedModeRestrictions(Map<String, String>, Set<Mode>, Set<Mode>) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerModeParser: Update the included and excluded mode sets passed in based on the key/value information available in the access=? tag.
updateBoundingBox(OsmNode) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderData: update bounding box to include osm node
updateBrokenEdgeGeometry(Edge, Vertex) - Static method in class org.goplanit.graph.modifier.GraphModifierImpl: update the geometry of the broken edge, knowing at what vertex it was broken from a previously longer edge
updateCapacityConstrainedInLinkSegments(Pair<Double, Integer>) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Based on the most restricting out-link segment, determine the flow acceptance factor for all unprocessed in-link with non-zero (remaining) flows towards this out-link segment
updateConnectedAccessLinkSegment(DirectedVertex, EdgeSegment) - Method in class org.goplanit.zoning.modifier.event.handler.UpdateDirectedConnectoidsOnBreakLinkSegmentHandler: perform the actual update of the connectoids based on the broken edge segment
updateConnectoidAccessZoneIdReferences() - Method in class org.goplanit.zoning.ConnectoidsImpl: update the references to all access zones for all connectoids
UpdateConnectoidsOnVertexRemovalHandler - Class in org.goplanit.zoning.modifier.event.handler: A listener designed to deal with the situation that sub graphs are removed from the network which leaves connectoids in the zoning that reference these sub graph elements invalid.
UpdateConnectoidsOnVertexRemovalHandler(Zoning) - Constructor for class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: constructor
updateCost(double[]) - Method in class org.goplanit.assignment.ltm.sltm.Pas: update costs of both paths.
updateCost(double[], boolean) - Method in class org.goplanit.assignment.ltm.sltm.Pas: update costs of an alternative
updateCosts(double[]) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Update costs on all registered PASs
updateCosts(Collection<Pas>, double[]) - Method in class org.goplanit.assignment.ltm.sltm.PasManager: Update cost for a selection of PASs only
updateCurrentLocation() - Method in class org.goplanit.utils.od.OdHashedIterator: Increment the location cursor until we reach a non-empty entry
updateCurrentLocation() - Method in class org.goplanit.utils.od.OdMatrixIterator: Increment the location cursor for the next iteration
updateDemandConstrainedInLinkSegments(Pair<Double, Integer>) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel
UpdateDirectedConnectoidsOnBreakLinkSegmentHandler - Class in org.goplanit.zoning.modifier.event.handler: Whenever links are broken and these link are references by connectoids, it is possible we must update the access vertex/link segment of this connectoid.
UpdateDirectedConnectoidsOnBreakLinkSegmentHandler(Map<Point, DirectedConnectoid>) - Constructor for class org.goplanit.zoning.modifier.event.handler.UpdateDirectedConnectoidsOnBreakLinkSegmentHandler: Constructor taking information regarding the access link segment downstream vertex that the connectoid is attached to before any breaking of links.
updatedLinkSegmentTypeBasedOnOsmWay(OsmWay, Map<String, String>, MacroscopicLinkSegmentType) - Method in class org.goplanit.osm.converter.network.OsmNetworkLayerParser: given the OSM way tags and settings we construct or find the appropriate link segment types for both directions, if no better alternative could be found than the one that is passed in is used, which is assumed to be the default link segment type for the OSM way.
UpdateEntryLinksOutflowConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: A functional class that consumes the result of a node model update in order to determine the next accepted outflows of incoming links of all nodes it is applied to
UpdateEntryLinksOutflowConsumer(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.UpdateEntryLinksOutflowConsumer: Constructor
UpdateExitLinkInflowsConsumer - Class in org.goplanit.assignment.ltm.sltm.consumer: A functional class that consumes the result of a node model update in order to update the inflows of all the outgoing links of the nodes it is applied to *
UpdateExitLinkInflowsConsumer(double[]) - Constructor for class org.goplanit.assignment.ltm.sltm.consumer.UpdateExitLinkInflowsConsumer: Constructor
updateIdMapping() - Method in class org.goplanit.utils.id.ManagedIdEntitiesImpl: updates the container keys based on currently presiding ids.
updateLinkSendingFlows - Variable in class org.goplanit.assignment.ltm.sltm.consumer.NetworkFlowUpdateData: flag indicating if link sending flows are to be updated
updateOdPaths(OdPaths) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingPath: Update the od paths to use in the loading
updateOsmWaysWithMultiplePlanitLinks(Long, Set<Link>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: update all known OSM ways with multiple PLANit links.
updateOsmWaysWithMultiplePlanitLinks(Map<Long, Set<Link>>) - Method in class org.goplanit.osm.converter.network.OsmNetworkReaderLayerData: update all known OSM ways with multiple PLANit links.
updatePcuToVehicleFactor(double) - Static method in class org.goplanit.utils.unit.VehiclesUnit: Update the pcu to vehicle conversion factor to use as it is not a fixed conversion
updatePotentiallyBlockingNodes(double[]) - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: For all nodes that have downstream link segments with sending flows that exceed their capacity, ensure they are registered as potentially blocking (if not already)
updateRemainingReceivingAndSendingFlows(long) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Remove all turn sending flows from provided in-link from remaining receiving flows (whichever out-link they go to) for a demand constrained in link R_b' = R_b'-t_ab' for all out links b' t_ab' = 0 (to ensure the turn flows are not accidentally reused when updating lambda in next iteration)
updateRemainingReceivingAndSendingFlows(long, double) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Remove all accepted turn sending flows (by scaling with flow acceptance factor) from provided in-link from remaining receiving flows (whichever out-link they go to) R_b' = R_b'-alpha_a*t_ab' for all out links b' t_ab' = 0 (to ensure the turn flows are not accidentally reused when updating lambda in next iteration)
updateSets(Pair<Double, Integer>) - Method in class org.goplanit.algorithms.nodemodel.TampereNodeModel: Based on the outlink segment, we determine which in links are demand constrained (if any).
updateStep(int) - Method in class org.goplanit.sdinteraction.smoothing.MSASmoothing: Update stepSize to 1/iterationIndex
updateStep(int) - Method in class org.goplanit.sdinteraction.smoothing.Smoothing: Determine the stepsize for the passed in iteraction
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.AbstractPhysicalCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.BPRLinkTravelTimeCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.FreeFlowLinkTravelTimeCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.physical.SteadyStateTravelTimeCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.virtual.AbstractVirtualCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.virtual.FixedConnectoidTravelTimeCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod) - Method in class org.goplanit.cost.virtual.SpeedConnectoidTravelTimeCost: Provide the cost calculation with information regarding the time period for which the cost is to be calculated
updateTimePeriod(TimePeriod, Mode, OdDemands) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Invoked before start of equilibrating a new time period
updateTransferZoneGroupStationName(TransferZoneGroup, OsmEntity, Map<String, String>) - Static method in class org.goplanit.osm.converter.zoning.handler.helper.TransferZoneGroupHelper: Process an OSM entity that is classified as a (train) station.
updateTransferZoneStationName(TransferZone, Map<String, String>) - Static method in class org.goplanit.osm.util.PlanitTransferZoneUtils: process an osm entity that is classified as a (train) station.
updateTurnSendingFlow(EdgeSegment, EdgeSegment, double) - Method in class org.goplanit.assignment.ltm.sltm.BushTurnData: Update the turn sending flow for a given turn
UPSTREAM - org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary.Location
UPSTREAM_NODE_EXTERNAL_ID - org.goplanit.output.property.OutputPropertyType
UPSTREAM_NODE_ID - org.goplanit.output.property.OutputPropertyType
UPSTREAM_NODE_ID - org.goplanit.tntp.enums.NetworkFileColumnType
UPSTREAM_NODE_LOCATION - org.goplanit.output.property.OutputPropertyType
UPSTREAM_NODE_XML_ID - org.goplanit.output.property.OutputPropertyType
UpstreamNodeExternalIdOutputProperty - Class in org.goplanit.output.property
UpstreamNodeExternalIdOutputProperty() - Constructor for class org.goplanit.output.property.UpstreamNodeExternalIdOutputProperty
UpstreamNodeIdOutputProperty - Class in org.goplanit.output.property
UpstreamNodeIdOutputProperty() - Constructor for class org.goplanit.output.property.UpstreamNodeIdOutputProperty
UpstreamNodeLocationOutputProperty - Class in org.goplanit.output.property
UpstreamNodeLocationOutputProperty() - Constructor for class org.goplanit.output.property.UpstreamNodeLocationOutputProperty
UpstreamNodeXmlIdOutputProperty - Class in org.goplanit.output.property
UpstreamNodeXmlIdOutputProperty() - Constructor for class org.goplanit.output.property.UpstreamNodeXmlIdOutputProperty
urbanHighwayDefaults - Variable in class org.goplanit.osm.defaults.OsmSpeedLimitDefaults: urban highway speed limit defaults
uriOfJarUrl(URL) - Static method in class org.goplanit.utils.misc.UriUtils: Create a URI knowing that the passed in URL points to a jar file, i.e., we transform something from file:<path>/xyz.jar to jar:file:<path>/xyz.jar!/.
UriUtils - Class in org.goplanit.utils.misc: Uitilities to modify and deal with URIs
UriUtils() - Constructor for class org.goplanit.utils.misc.UriUtils
UrlUtils - Class in org.goplanit.utils.misc: Utilities to deal with Java URL instances
UrlUtils() - Constructor for class org.goplanit.utils.misc.UrlUtils
US_VIRGIN_ISLANDS - Static variable in class org.goplanit.utils.locale.CountryNames
UsabilityModeFeatures - Interface in org.goplanit.utils.mode: Class to highlight the use of a particular mode, i.e., is it a public or private mode, ride-share, etc.
UsabilityModeFeaturesImpl - Class in org.goplanit.mode: Class to highlight the use of a particular mode, i.e., is it a public or private mode, ride-share, etc.
UsabilityModeFeaturesImpl() - Constructor for class org.goplanit.mode.UsabilityModeFeaturesImpl: Default constructor
UsabilityModeFeaturesImpl(UseOfModeType) - Constructor for class org.goplanit.mode.UsabilityModeFeaturesImpl: Constructor
USE_SIDEPATH - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: use_sidepath tag mainly used by bicycle mode
UseOfModeType - Enum in org.goplanit.utils.mode: Indicates how a mode is used; part of usability features
useOfType - Variable in class org.goplanit.mode.UsabilityModeFeaturesImpl: the use of the type
UserClass - Class in org.goplanit.userclass: A user class defines a combination of one or more characteristics of users in an aggregate representation of traffic which partially dictate how they behave in traffic assignment.
UserClass(UserClass) - Constructor for class org.goplanit.userclass.UserClass: Copy constructor
UserClass(IdGroupingToken, String, Mode, TravelerType) - Constructor for class org.goplanit.userclass.UserClass: Constructor of user class
userClasses - Variable in class org.goplanit.demands.Demands: internal class instance containing all user classes on this demand instance
UserClasses() - Constructor for class org.goplanit.demands.Demands.UserClasses: Constructor
UserClasses(Demands.UserClasses) - Constructor for class org.goplanit.demands.Demands.UserClasses: Copy constructor
UTF8 - Static variable in class org.goplanit.utils.xml.PlanitXmlWriterUtils: utf-8 string

V

validate() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmSettings: Validate if all settings have been properly set and log found issues
validate() - Method in class org.goplanit.graph.directed.EdgeSegmentImpl: validate the contents of this edge segment
validate() - Method in class org.goplanit.graph.EdgeImpl: validate the contents of this edge
validate() - Method in class org.goplanit.network.layer.physical.LinkImpl: validate the contents of this edge
validate() - Method in class org.goplanit.network.layer.service.ServiceLegImpl: Validate based on edge that it is, but also make sure that the references to parent network are consistent, i.e., the service nodes reside on the parent links in the right location as well
validate() - Method in class org.goplanit.network.layer.UntypedNetworkLayerImpl: Basic validation of the network verifying if all nodes and link s are properly set and connected
validate() - Method in interface org.goplanit.utils.graph.Edge: validate the contents of this edge
validate() - Method in interface org.goplanit.utils.graph.EdgeSegment: validate the contents of this edge segment
validate() - Method in interface org.goplanit.utils.graph.UntypedDirectedGraph: validate the graph, issues will be logged
validate() - Method in interface org.goplanit.utils.graph.UntypedGraph: validate the graph, issues will be logged
validate() - Method in interface org.goplanit.utils.graph.Vertex: Validate the vertex regarding it connections to edges etc.
validate() - Method in interface org.goplanit.utils.network.layer.TransportLayer: validate the infrastructure of this layer
validateAndFilterKeyProperties(OutputProperty[]) - Method in class org.goplanit.output.configuration.LinkOutputTypeConfiguration: Validate whether the specified list of keys is valid, and if it is return only the keys which will be used
validateAndFilterKeyProperties(OutputProperty[]) - Method in class org.goplanit.output.configuration.OdOutputTypeConfiguration: Validate whether the specified list of keys is valid, and if it is return only the keys which will be used
validateAndFilterKeyProperties(OutputProperty[]) - Method in class org.goplanit.output.configuration.OutputTypeConfiguration: Validate whether the specified list of keys is valid, and if it is return only the keys which will be used
validateAndFilterKeyProperties(OutputProperty[]) - Method in class org.goplanit.output.configuration.PathOutputTypeConfiguration: Validate whether the specified list of keys is valid, and if it is return only the keys which will be used
validateInputs() - Method in class org.goplanit.assignment.ltm.sltm.loading.StaticLtmNetworkLoading: Validate all constructor parameters
validateNetwork(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.matsim.converter.MatsimWriter: Validate the network instance available, throw or log when issues are found
validateXml(File, String) - Static method in class org.goplanit.io.xml.util.JAXBUtils: Method to validate an XML input file against an XSD schema using Java XML Validator
validateXmlInputFile(File, String) - Static method in class org.goplanit.io.input.PlanItInputBuilder: Validates an input XML file against an XSD file
value() - Method in enum org.goplanit.gtfs.enums.GtfsFileType: Get the value of the enum
value() - Method in enum org.goplanit.gtfs.enums.GtfsKeyType: Get the value of the enum
value() - Method in enum org.goplanit.gtfs.enums.GtfsObjectType: Get the value of the enum
value() - Method in enum org.goplanit.osm.util.OsmPtVersionScheme: Colect the value
value() - Method in enum org.goplanit.output.enums.DataType
value() - Method in enum org.goplanit.output.enums.OdSkimSubOutputType
value() - Method in enum org.goplanit.output.enums.OutputType
value() - Method in interface org.goplanit.output.enums.OutputTypeEnum
value() - Method in enum org.goplanit.output.property.OutputPropertyPriority: Return the String value associated with this enumeration value (the fully qualified class name)
value() - Method in enum org.goplanit.output.property.OutputPropertyType: Return the String value associated with this enumeration value (the fully qualified class name)
value() - Method in enum org.goplanit.utils.mode.PredefinedModeType
value() - Method in enum org.goplanit.utils.zoning.ConnectoidType: Colect the value
value() - Method in enum org.goplanit.utils.zoning.TransferZoneType: Colect the value
valueIn(EnumSet<GtfsKeyType>, String) - Static method in enum org.goplanit.gtfs.enums.GtfsKeyType: Verify if value is present in provided enumset's values
valueOf(String) - Static method in enum org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary.Location: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.converter.IdMapperType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.gtfs.enums.GtfsFileType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.gtfs.enums.GtfsFileTypePresence: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.gtfs.enums.GtfsKeyType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.gtfs.enums.GtfsObjectType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.osm.util.OsmPtVersionScheme: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.enums.DataType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.enums.OdSkimSubOutputType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.enums.OutputType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.enums.PathOutputIdentificationType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.property.OutputPropertyPriority: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.output.property.OutputPropertyType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.tntp.enums.CapacityPeriod: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.tntp.enums.LengthUnits: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.tntp.enums.NetworkFileColumnType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.tntp.enums.SpeedUnits: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.tntp.enums.TimeUnits: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.args.ArgumentStyle: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.event.EventListenerPriority: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.mode.MotorisationModeType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.mode.PredefinedModeType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.mode.TrackModeType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.mode.UseOfModeType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.mode.VehicularModeType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.unit.UnitGroup: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.unit.UnitType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.zoning.ConnectoidType: Returns the enum constant of this type with the specified name.
valueOf(String) - Static method in enum org.goplanit.utils.zoning.TransferZoneType: Returns the enum constant of this type with the specified name.
values() - Static method in enum org.goplanit.assignment.ltm.eltm.LinkSegmentBoundary.Location: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.assignment.ltm.sltm.loading.StaticLtmLoadingScheme: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.converter.IdMapperType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.gtfs.enums.GtfsFileType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.gtfs.enums.GtfsFileTypePresence: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.gtfs.enums.GtfsKeyType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.gtfs.enums.GtfsObjectType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.osm.util.OsmPtVersionScheme: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.enums.DataType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.enums.OdSkimSubOutputType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.enums.OutputType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.enums.PathOutputIdentificationType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.property.OutputPropertyPriority: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.output.property.OutputPropertyType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.tntp.enums.CapacityPeriod: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.tntp.enums.LengthUnits: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.tntp.enums.NetworkFileColumnType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.tntp.enums.SpeedUnits: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.tntp.enums.TimeUnits: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.args.ArgumentStyle: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.event.EventListenerPriority: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.mode.MotorisationModeType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.mode.PredefinedModeType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.mode.TrackModeType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.mode.UseOfModeType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.mode.VehicularModeType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.unit.UnitGroup: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.unit.UnitType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.zoning.ConnectoidType: Returns an array containing the constants of this enum type, in the order they are declared.
values() - Static method in enum org.goplanit.utils.zoning.TransferZoneType: Returns an array containing the constants of this enum type, in the order they are declared.
valuesAsNewSet() - Method in interface org.goplanit.utils.wrapper.MapWrapper: Create a copy of the map's distinct values as a set
valuesAsNewSet() - Method in class org.goplanit.utils.wrapper.MapWrapperImpl: Create a copy of the map's distinct values as a set
VALUETAG_SPECIALCHAR_STRIP_REGEX - Static variable in class org.goplanit.osm.util.OsmTagUtils: regular expression used to identify non-word characters (a-z any case, 0-9 or _) or whitespace
VC_RATIO - org.goplanit.output.property.OutputPropertyType
VcRatioOutputProperty - Class in org.goplanit.output.property: Calculate V/C ratio output property class
VcRatioOutputProperty() - Constructor for class org.goplanit.output.property.VcRatioOutputProperty
VEH - org.goplanit.utils.unit.UnitType
VEH - Static variable in interface org.goplanit.utils.unit.Unit: predefined VEHICLE VehiclesUnit
VEH_HOUR - Static variable in interface org.goplanit.utils.unit.Unit: predefined VEH/HOUR Unit
VEH_KM - Static variable in interface org.goplanit.utils.unit.Unit: predefined VEH/KM Unit
VEHICLE - org.goplanit.utils.mode.VehicularModeType
VEHICLE - Static variable in class org.goplanit.osm.tags.OsmRoadModeCategoryTags: group indicating any vehicle type
VEHICLES - org.goplanit.utils.unit.UnitGroup
VehiclesUnit - Class in org.goplanit.utils.unit: Unit class for all vehicles related units.
VehiclesUnit(UnitType) - Constructor for class org.goplanit.utils.unit.VehiclesUnit: Constructor with default 1:1 conversion between vehicles and pcus
VehicularModeType - Enum in org.goplanit.utils.mode: A mode is either vehicular oriented or notmodeType; part of physical features
verifyComponentCompatibility() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Verify if the create traffic assignment (sbu)components are compatible with each other and the created transport network.
verifyComponentCompatibility() - Method in class org.goplanit.assignment.ltm.LtmAssignment: Verify if the create traffic assignment (sbu)components are compatible with each other and the created transport network.
verifyComponentCompatibility() - Method in class org.goplanit.assignment.ltm.sltm.StaticLtm: Verify if the create traffic assignment (sbu)components are compatible with each other and the created transport network.
verifyComponentCompatibility() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Verify if a supported gap function is used
verifyComponentCompatibility() - Method in class org.goplanit.assignment.TrafficAssignment: Verify if the create traffic assignment (sbu)components are compatible with each other and the created transport network.
verifyNetworkDemandZoningCompatibility() - Method in class org.goplanit.assignment.algorithmb.AlgorithmB: Verify if the traffic assignment inputs (components which are provided upon creation and not subcomponents that are created as part of the build process of the assignment are compatible).
verifyNetworkDemandZoningCompatibility() - Method in class org.goplanit.assignment.ltm.LtmAssignment: Verify if the network contains a single compatible infrastructure layer because sLTM does not (yet) support multiple (or intermodal) network layers
verifyNetworkDemandZoningCompatibility() - Method in class org.goplanit.assignment.traditionalstatic.TraditionalStaticAssignment: Verify if the network contains a single compatible infrastructure layer as traditional static assignment does not support intermodal network layers
verifyNetworkDemandZoningCompatibility() - Method in class org.goplanit.assignment.TrafficAssignment: Verify if the traffic assignment inputs (components which are provided upon creation and not subcomponents that are created as part of the build process of the assignment are compatible).
verifyNetworkLoadingConvergenceProgress(StaticLtmNetworkLoading, int) - Method in class org.goplanit.assignment.ltm.sltm.StaticLtmAssignmentStrategy: Verify convergence progress and if insufficient attempt to activate one or more extensions to overcome convergence difficulties
VERSION_1 - org.goplanit.osm.util.OsmPtVersionScheme
VERSION_2 - org.goplanit.osm.util.OsmPtVersionScheme
VERSION_PROPERTY_KEY - Static variable in class org.goplanit.io.xml.util.ApplicationProperties
Vertex - Interface in org.goplanit.utils.graph: Vertex representation connected to one or more edges and/or edge segments
VERTEX_ID_CLASS - Static variable in interface org.goplanit.utils.graph.Vertex: id class for generating ids
VertexFactory - Interface in org.goplanit.utils.graph: Factory interface for creating vertex instances
VertexFactoryImpl - Class in org.goplanit.graph: Factory for creating vertices on vertices container
VertexFactoryImpl(IdGroupingToken, Vertices) - Constructor for class org.goplanit.graph.VertexFactoryImpl: Constructor
VertexImpl - Class in org.goplanit.graph: Vertex representation connected to one or more entry and exit edges
VertexImpl(VertexImpl) - Constructor for class org.goplanit.graph.VertexImpl: Copy constructor.
VertexImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.VertexImpl: Constructor
vertexMeasuredCost - Variable in class org.goplanit.algorithms.shortestpath.ShortestPathResultImpl: the costs found by a shortest path run
vertices - Variable in class org.goplanit.graph.UntypedGraphImpl: class instance containing all vertices
Vertices - Interface in org.goplanit.utils.graph: Container class for vertices and creating instances within this container via factory.
VerticesImpl - Class in org.goplanit.graph: Vertices implementation container and factory access
VerticesImpl(VerticesImpl) - Constructor for class org.goplanit.graph.VerticesImpl: Copy constructor
VerticesImpl(IdGroupingToken) - Constructor for class org.goplanit.graph.VerticesImpl: Constructor
VerticesImpl(IdGroupingToken, VertexFactory) - Constructor for class org.goplanit.graph.VerticesImpl: Constructor
VirtualCost - Interface in org.goplanit.cost.virtual: Interface to classify costs of virtual links
VirtualCostConfigurator<T extends AbstractVirtualCost> - Class in org.goplanit.cost.virtual: Base class for all virtual cost configurator implementations
VirtualCostConfigurator(Class<T>) - Constructor for class org.goplanit.cost.virtual.VirtualCostConfigurator: Constructor
VirtualCostConfiguratorFactory - Class in org.goplanit.cost.virtual: factory for the virtual cost types supported directory by PLANit
VirtualCostConfiguratorFactory() - Constructor for class org.goplanit.cost.virtual.VirtualCostConfiguratorFactory
virtualNetwork - Variable in class org.goplanit.zoning.Zoning: Virtual network holds all the virtual connections to the physical network (layers)
VirtualNetwork - Class in org.goplanit.network.virtual: Model free virtual network which is part of the zoning and holds all the virtual infrastructure connecting the zones to the physical road network.
VirtualNetwork(IdGroupingToken) - Constructor for class org.goplanit.network.virtual.VirtualNetwork: Constructor
visitItem(Object) - Method in class org.goplanit.osm.util.PlanitJtsIntersectOsmNodeVisitor
visitItem(Object) - Method in class org.goplanit.utils.geo.PlanitJtsItemVisitor

W

WASH - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
WATERWAY - Static variable in class org.goplanit.osm.tags.OsmRelationTypeTags
WEDNESDAY - org.goplanit.gtfs.enums.GtfsKeyType
WHEELCHAIR_ACCESSIBLE - org.goplanit.gtfs.enums.GtfsKeyType
WHEELCHAIR_BOARDING - org.goplanit.gtfs.enums.GtfsKeyType
WORKSHOP - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
WORLD - Static variable in class org.goplanit.utils.locale.CountryNames: alias for global
WORLD_WG84 - Static variable in class org.goplanit.utils.epsg.EpsgCodesByCountry: Area of use: world, EPSG:4326, accessible via countryname: "global" as CountryNames.GLOBAL
write(MacroscopicNetwork, Zoning) - Method in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: Write a network to the writer's output format.
write(MacroscopicNetwork, Zoning) - Method in class org.goplanit.matsim.converter.MatsimIntermodalWriter: Persist the PLANit network and zoning and a MATSIM compatible network to disk
write(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.io.converter.network.PlanitNetworkWriter: write a network to the writer's output format.
write(TransportLayerNetwork<?, ?>) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriter: write a network to the writer's output format.
write(Zoning) - Method in class org.goplanit.io.converter.zoning.PlanitZoningWriter: write a network to the writer's output format.
write(Zoning) - Method in class org.goplanit.matsim.converter.MatsimZoningWriter: extract public transport information from planit zoning and use it to persist as much of the matsim public transport xml's as possible
write(T) - Method in interface org.goplanit.converter.ConverterWriter: write a network to the writer's output format.
write(T, U) - Method in interface org.goplanit.converter.MultiConverterWriter: Write a network to the writer's output format.
writeDetailedGeometryFile(MacroscopicNetworkLayerImpl) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriter: Create detailed geometry file compatible with VIA viewer
writeEmptyElement(XMLStreamWriter, String, int) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: Write an empty element (with indentation), e.g.
writeEndElementNewLine(XMLStreamWriter, boolean) - Method in class org.goplanit.matsim.converter.MatsimWriter: write an end element and add newline afterwards
writeEndElementNewLine(XMLStreamWriter, int) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: Write an end element and add newline afterwards
writeGeneralResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Write General results for the current time period to the CSV file
writeGeneralResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write General results for the current time period to the CSV file
writeGeneralResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Write General results for the current time period to the CSV file
writeGeneralResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Write General results for the current time period to the CSV file
writeIndentation(XMLStreamWriter) - Method in class org.goplanit.matsim.converter.MatsimWriter: Add indentation to stream at current indentation level
writeIndentation(XMLStreamWriter, int) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: add indentation to stream at current indentation level via tabs
writeLinkResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Write link results for the current time period to the CSV file
writeLinkResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write link results for the current time period to the CSV file
writeLinkResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Write link results for the current time period to Map in memory
writeLinkResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Write link results for the current time period to the CSV file
writeLinkResultsForCurrentTimePeriodToCsvPrinter(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, CSVPrinter) - Method in class org.goplanit.output.formatter.CsvFileOutputFormatter: Write output values to the Link CSV file for the current iteration
writeNewLine(XMLStreamWriter) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: write a new line to the stream, e.g.
writeOdResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Write Origin-Destination results for the time period to the CSV file
writeOdResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write Origin-Destination results for the time period to the CSV file
writeOdResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Write Origin-Destination results for the time period to the Map in memory
writeOdResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Write Origin-Destination results for the time period to the CSV file
writeOdResultsForCurrentTimePeriodToCsvPrinter(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, CSVPrinter) - Method in class org.goplanit.output.formatter.CsvFileOutputFormatter: Write output values to the OD CSV file for the current iteration
writePathResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Write Path results for the time period to the CSV file
writePathResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write OD Path results for the time period to the CSV file
writePathResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Write Path results for the time period to the CSV file
writePathResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Write Path results for the time period to the CSV file
writePathResultsForCurrentTimePeriodToCsvPrinter(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, CSVPrinter) - Method in class org.goplanit.output.formatter.CsvFileOutputFormatter: Write output values to the Path CSV file for the current iteration
writeSimulationResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.io.output.formatter.PlanItOutputFormatter: Write Simulation results for the current time period to the CSV file
writeSimulationResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.BaseOutputFormatter: Write Simulation results for the current time period to the CSV file
writeSimulationResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.output.formatter.MemoryOutputFormatter: Write Simulation results for the current time period to the CSV file
writeSimulationResultsForCurrentTimePeriod(OutputConfiguration, OutputTypeConfiguration, OutputTypeEnum, OutputAdapter, Set<Mode>, TimePeriod, int) - Method in class org.goplanit.tntp.output.formatter.CSVOutputFormatter: Write Simulation results for the current time period to the CSV file
writeStartElementNewLine(XMLStreamWriter, String, boolean) - Method in class org.goplanit.matsim.converter.MatsimWriter: write a start element and add newline afterwards
writeStartElementNewLine(XMLStreamWriter, String, int) - Static method in class org.goplanit.utils.xml.PlanitXmlWriterUtils: Write a start element (with indentation) and add newline afterwards
writeTransitScheduleXML(XMLStreamWriter, Zoning, MacroscopicNetworkLayer) - Method in class org.goplanit.matsim.converter.MatsimZoningWriter: convert the planit public transport infrastructure to matsim transit schedule xml
writeXmlNetworkFile(MacroscopicNetworkLayerImpl) - Method in class org.goplanit.matsim.converter.MatsimNetworkWriter: write the xml MATSIM network
writeXmlTransitScheduleFile(Zoning) - Method in class org.goplanit.matsim.converter.MatsimZoningWriter: Starting point for persisting the matsim transit schedule file

X

X - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
X - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
XML - org.goplanit.converter.IdMapperType
XML_V1 - Static variable in class org.goplanit.utils.xml.PlanitXmlWriterUtils: xml versin 1.0 string
XmlMacroscopicNetworkLayerHelper - Class in org.goplanit.io.xml.network.physical.macroscopic: Process the Infrastructure object populated with data from the XML file
XmlMacroscopicNetworkLayerHelper() - Constructor for class org.goplanit.io.xml.network.physical.macroscopic.XmlMacroscopicNetworkLayerHelper
xmlRawNetwork - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: xml element to populate network on
xmlRawZoning - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriter: xml element to populate zoning on
XmlTextFileOutputFormatter - Interface in org.goplanit.output.formatter: This interfaces defines behaviours which output formatters which generate an XML output file must have.
xmlToPlanit(MotorisationType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert motorisation type from xml to PLANit
xmlToPlanit(TimeUnit) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: Convert TimeUnit type from XML to PLANit Unit
xmlToPlanit(TrackType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert track type from xml to PLANit
xmlToPlanit(UsedToType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert used-to type from xml to PLANit
xmlToPlanit(VehicularType) - Static method in class org.goplanit.io.xml.util.EnumConversionUtil: convert vehicle type from xml to PLANit
XSD_SCHEMA_URI_DEVELOPMENT_GENERIC - Static variable in class org.goplanit.io.xml.util.PlanitSchema: the schema URI location (dir) of XML components during development
XSD_SCHEMA_URI_RELEASE_GENERIC - Static variable in class org.goplanit.io.xml.util.PlanitSchema: the schema URI location of any PLANit XSD schema for any release version, but without the actual version or schema appended yet

Y

Y - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
Y - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
YARD - Static variable in class org.goplanit.osm.tags.OsmRailwayTags
YES - Static variable in class org.goplanit.osm.tags.OsmAccessTags: value: yes tag
YES - Static variable in class org.goplanit.osm.tags.OsmBicycleTags
YES - Static variable in class org.goplanit.osm.tags.OsmOneWayTags
YES - Static variable in class org.goplanit.osm.tags.OsmPedestrianTags: value for sidewalk key , see also https://wiki.openstreetmap.org/wiki/Key:sidewalk
YES - Static variable in class org.goplanit.osm.tags.OsmTags

Z

Z - Static variable in class org.goplanit.matsim.xml.MatsimNetworkXmlAttributes
Z - Static variable in class org.goplanit.matsim.xml.MatsimTransitXmlAttributes
ZAMBIA - Static variable in class org.goplanit.utils.locale.CountryNames
ZIMBABWE - Static variable in class org.goplanit.utils.locale.CountryNames
ZIP - Static variable in class org.goplanit.utils.misc.FileUtils
ZipUtils - Class in org.goplanit.utils.zip: Utilities for accessing content in zip files
ZipUtils() - Constructor for class org.goplanit.utils.zip.ZipUtils
Zone - Interface in org.goplanit.utils.zoning: Zone represent a geographical area with a centroid which in turn represent the single point of departure of all traffic in the zone
ZONE_ID - org.goplanit.gtfs.enums.GtfsKeyType
ZONE_ID_CLASS - Static variable in interface org.goplanit.utils.zoning.Zone: the class to use for the id generation
ZoneFactoryImpl<Z extends Zone> - Class in org.goplanit.zoning: Factory for creating od zones (on container)
ZoneFactoryImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.ZoneFactoryImpl: Constructor
ZoneImpl - Class in org.goplanit.zoning: Represents a zone base class.
ZoneImpl(IdGroupingToken) - Constructor for class org.goplanit.zoning.ZoneImpl: Constructor
ZoneImpl(ZoneImpl) - Constructor for class org.goplanit.zoning.ZoneImpl: Constructor
zones - Variable in class org.goplanit.utils.od.OdDataImpl: holder for zones considered in the matrix
zones - Variable in class org.goplanit.utils.od.OdHashedIterator: Zones object to store travel analysis zones (from Zoning object)
zones - Variable in class org.goplanit.utils.od.OdMatrixIterator: Zones object to store travel analysis zones (from Zoning object)
Zones<Z extends Zone> - Interface in org.goplanit.utils.zoning: Interface to manage zones
ZonesImpl<Z extends Zone> - Class in org.goplanit.zoning: Partial implementation of the Zones <T> interface
ZonesImpl() - Constructor for class org.goplanit.zoning.ZonesImpl: Constructor
ZonesImpl(ZonesImpl<Z>) - Constructor for class org.goplanit.zoning.ZonesImpl: Copy constructor
zoning - Variable in class org.goplanit.io.converter.zoning.PlanitZoningReader: the zoning to populate
zoning - Variable in class org.goplanit.network.transport.TransportModelNetwork: Holds the zoning structure and virtual transport network interfacing with the physical network
zoning - Variable in class org.goplanit.zoning.modifier.event.handler.UpdateConnectoidsOnVertexRemovalHandler: zoning to update zoning components when needed
zoning - Variable in class org.goplanit.zoning.modifier.ZoningModifierImpl: The zoning instance to apply modifications on
Zoning - Class in org.goplanit.zoning: Zoning class which holds a particular zoning
Zoning(IdGroupingToken, IdGroupingToken) - Constructor for class org.goplanit.zoning.Zoning: Constructor The second id generation token should be the token used by the physical network to create physical network entities such as links, nodes, etc.
Zoning(Zoning) - Constructor for class org.goplanit.zoning.Zoning: Copy constructor
ZONING_XSD_FILE - Static variable in class org.goplanit.io.converter.zoning.PlanitZoningReader: Reference to zoning schema location, TODO: move to properties file
ZoningConverter - Class in org.goplanit.converter.zoning: Zoning converter class able to convert a zoning network from one source to another
ZoningConverter(ZoningReader, ZoningWriter) - Constructor for class org.goplanit.converter.zoning.ZoningConverter: constructor
ZoningConverterFactory - Class in org.goplanit.converter.zoning: Factory class for creating zoning converters
ZoningConverterFactory() - Constructor for class org.goplanit.converter.zoning.ZoningConverterFactory
ZoningModificationEvent - Interface in org.goplanit.utils.zoning.modifier.event: Interface for the group of events that are used around zoning modification
zoningModifier - Variable in class org.goplanit.zoning.Zoning: modifier that can be used to perform modifications to the zoning that comprise more than a single element of the zoning, e.g.
ZoningModifier - Interface in org.goplanit.utils.zoning.modifier: zoning modifier takes care of modifications that comprise multiple components across the zoning in an integrated fashion
ZoningModifierEventProducer - Interface in org.goplanit.utils.zoning.modifier.event: Interface dedicated to the ZoningModifier event related exposed methods.
ZoningModifierEventType - Class in org.goplanit.utils.zoning.modifier.event: zoning modifier event type class.
ZoningModifierEventType(String) - Constructor for class org.goplanit.utils.zoning.modifier.event.ZoningModifierEventType: Constructor
ZoningModifierImpl - Class in org.goplanit.zoning.modifier: Implementation of the zoningModifier interface
ZoningModifierImpl(Zoning) - Constructor for class org.goplanit.zoning.modifier.ZoningModifierImpl: constructor
ZoningModifierListener - Interface in org.goplanit.utils.zoning.modifier.event: To serve as base listener class for all zoning modification events, where its onX method provides any zoning modification event as parameter
zoningPtSettings - Variable in class org.goplanit.osm.converter.intermodal.OsmIntermodalReaderSettings: the zoning PT settings to use
ZoningReader - Interface in org.goplanit.converter.zoning: interface to read a PLANit zoning
zonings - Variable in class org.goplanit.project.CustomPlanItProject: The registered zonings
zonings - Variable in class org.goplanit.project.PlanItProjectInput: The registered zonings
zoningSettings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalReaderSettings: the zoning settings to use
zoningSettings - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalWriterSettings: the zoning settings to use
zoningSettings - Variable in class org.goplanit.matsim.converter.MatsimIntermodalWriterSettings: the zoning settings to use
zoningToPopulate - Variable in class org.goplanit.io.converter.intermodal.PlanitIntermodalReader: the zoning to populate
zoningToPopulate - Variable in class org.goplanit.tntp.converter.zoning.TntpZoningReaderSettings: the zoning to populate
ZoningWriter - Interface in org.goplanit.converter.zoning: Interface to write a PLANit zoning to disk

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
All Classes All Packages